SHINING 3D FabCure 2 Post-curing Unit

Unpacking and Introduction

What's in the Box

The FabCure 2 is protected by foam inserts above and around the machine. During unpacking, inspect the FabCure 2 for any damages or missing items.

Diagram Description: A visual representation of the FabCure 2 unit being unpacked from its packaging. Components shown include the main unit, a turntable, a power cable, a Quick Start Guide booklet, and a Quality Certification card. Foam inserts protect the unit.

Note: Remove all packaging material before connecting power.

Product Overview

Diagram Description: A cutaway view of the FabCure 2 unit with numbered callouts, illustrating its key components.

• 1. Chamber door: Insulates the cure chamber and internal UV light.
• 2. Turntable: Rotates to ensure balanced curing for all surfaces.
• 3. Knob: Integrated into an OLED screen, enabling interactive and convenient operation.
• 4. LEDs: Emit powerful UV light from the sides and bottom.
• 5. Lamp: Designed to automatically turn on when the chamber door is opened.
• 6. Heating module: Precisely controls ambient temperature to 60°C.

Using FabCure 2

Where to Install the FabCure 2

Diagram Description: Visuals indicating optimal and suboptimal installation conditions.

Optimal Conditions:

• Temperature: 10°C-30°C [temperature range 10°C-30°C]
• Power Source: Available [power source icon]
• Humidity: 30-70%RH [humidity range 30-70%RH]
• Surface: Level surface [level surface icon]

Suboptimal Conditions:

• Uneven surface [uneven surface icon]
• Hot environment [hot environment icon]

Find a clean, level surface with a nearby power source to install and operate the FabCure 2. Operate the FabCure 2 in a well-ventilated room with a temperature of 10–30 °C and a humidity of 30-70%RH. For optimal performance, do not exceed this range.

Power-on the FabCure 2

Diagram Description: Two steps illustrated for powering on the unit. Step 1: Shows inserting the turntable onto the circular wheel mount at the base of the cure chamber. Step 2: Shows connecting the provided power cable to the unit's power port and indicates the power switch.

Details:

• Open the chamber door and insert the turntable.
• Use the provided power cable to plug FabCure 2 into a power source. Turn it on by flipping the power switch on the back of the unit.
• Power Port: Fuse: 250V AC, 6.3A [power port icon]
• Power Switch: [power switch icon]

Post-Curing

Diagram Description: Shows prints placed on the turntable inside the chamber, then the door closing. A subsequent image shows the material selection screen.

1. Place washed and dried prints on the turntable with the most even spacing possible to allow light and heat to reach all areas. Gently close the chamber door [door icon].
2. Select desired material by operating the knob to begin the process. The proper post-curing time and temperature for the selected material will be set automatically. (Material options shown: OD01, DM12, TR01).

FabCure 2 Controls

Diagram Description: Shows the control knob and OLED screen with material options. An arrow indicates rotating the knob.

• Rotate the knob clockwise or counterclockwise to move between items in the menu of SHINING 3D materials.
• Press the knob to select or confirm an option on the display.
• Once the curing cycle begins, press the knob or open the door [door icon] to pause post-curing.

Technical Specifications

Safety and Maintenance

Safety

The FabCure 2 uses heat and UV light to post-cure the 3D prints. It contains a heating module to heat the chamber and maintain the ambient temperature between 30°C to 60°C and help ensure parts are strong after post-curing.

• Opening Protection: The chamber door includes an interlock system that automatically pauses heating and turns off the LEDs when the door is open.
• Overheating Protection: The unit includes multiple temperature controllers to keep the chamber from overheating.
• Hot Surfaces: Surfaces of the chamber may be hot during and after post-curing. Do not touch the internal surface of the chamber when removing parts from the FabCure 2. Wear gloves when handling prints.

Maintenance

• Keep the workspace clean for operating the FabCure 2.
• Visually inspect the internal surface, turntable, and transparent windows of LEDs for traces of resin, cracks, or other damage. Clean the internal surface, turntable, and windows of the LEDs if needed.
• After a post-curing cycle, remove particles of cured resin and keep the FabCure 2 clean for next use.
• If the FabCure 2 is operating at 60°C, it needs to be cooled for 15 minutes after a continuous work for 2 hours to extend the service life of the LEDs.

Troubleshooting

Issue: The display indicates "Plz Close Door!" when the door is closed.

Cause: The sensor of the door is not working.

Solution: Check if the interlock magnets are blocked. [interlock magnets diagram description]

Issue: The display indicates "Heating Unit Error!".

Cause: The heating module does not work; the temperature sensor does not work.

Solution: Unplug the unit. Wait until the unit cools down. Reconnect the power cable to restart the unit.

Issue: The display goes black.

Cause: A sudden loss of power supply during the operation.

Solution: Unplug the unit. Wait at least three minutes. Reconnect the power cable to restart the unit.

Issue: Network connection failed.

Cause: Weak WiFi signal. [wifi icon]

Solution: Move the unit closer to the router. Reconnect to the WiFi.

Support Information

Go Digital with SHINING 3D

Support Center: https://support.shining3ddental.com/en/support/solutions/

Aftersale Service: Create Support Ticket, Ticket Management

Technical Resource: FAQs, Basic Tutorials, Useful Tips, Software Download

APAC HEADQUARTERS: SHINING 3D Tech. Co., Ltd. No. 1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China, 311258. Tel: +86 571 8299 9050

EMEA REGION: SHINING 3D Technology GmbH. Breitwiesenstraße 28 70565 Stuttgart, Germany. Tel: +49-711 28444089

AMERICAS REGION: SHINING 3D Technology Inc. 1740 César Chávez St. Unit D. San Francisco, CA 94124. Tel: +1415 259 4787. 2805 W Busch Blvd, Suite 222, Tampa, FL 33618 United States