SHINING 3D

Quick Start Guide

Getting Started with EinScan Pro 2X V2

Preparation

Device List

Standard Pack

Industrial Pack (optional)

Color Pack (optional)

*Please only use water to clean the calibration board, avoid touching any corrosive liquid.

Recommended System Requirements

Installation

Hardware Installation

1. Standard Pack

2. Industrial Pack

3. Color Pack

4. Operation Environment

Avoid direct sunlight or too bright of light indoors. Make sure the scanned object and table are stable. (For Fixed Scan)

Software Installation

Software Download

Download the software and user manual from support.shining3d.com or www.einscan.com/software-download

Run the installer

License Activation

Calibration

Camera Calibration

White Balance Calibration

Only required for Color Pack

Hold the scanner vertically to the back side of calibration board (white) and adjust the distance until you find the proper distance.

Illustration shows the scanner positioned near a white calibration board for white balance calibration.

The first time installing the software, calibration is required by default. Calibration is also required for the following:

1. Device Change
2. After device enduring bumpy transportation
3. After device accuracy decreases
4. Device being uncalibrated for a long time, for example, 15 days.
5. When using the Color Pack, the texture camera's position has been changed.

Fixed Scan

Fixed Scan Workflow

New Project or Open Project

• Markers Alignment
• Turntable Coded Targets Alignment
• Feature Alignment

Select Align Mode

Adjust Angle and Distance

Adjust Brightness

Scan

Edit

Tips: Shift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right.

Continue Scanning

Auto Align Correctly or Not?

Y/N

Manual Align

Finish or Not?

Y/N

Finish

Save Mesh (OBJ. STL. PLY. etc.)

Mesh

Watertight / Unwatertight

Post Processing

Save Separated Point Cloud (separated ASC)

Handheld HD Scan

Handheld HD Scan Workflow

New Project

• Select Align Mode
• Select Texture
• Select Operation Mode
• Select Resolution

Open Project

Preview

Tips: Click the start button once to preview. Click the start button once again to start scan. To adjust the brightness before or during scan, click the start button twice, and using "+" & "-" to highlight or shadow. Keep the scanner vertically to the object surface. Optimize the distance by the color range on the screen or on the scanner. Green color shows an appropriate distance.

Scan

Edit

Tips: Shift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right. The edit function is only activated after selecting data.

Finish

Save point cloud (ASC)

Mesh

Watertight / Unwatertight

Post Processing

Save Mesh (OBJ. STL. PLY. etc.)

Handheld Rapid Scan

Handheld Rapid Scan Workflow

New Project

• Select Align Mode
• Select Texture
• Select Operation Mode
• Select Resolution

Open Project

Preview

Tips: Click the start button once to preview. Click the start button once again to start scan. To adjust the brightness before or during scan, click the start button twice, and using "+" & "-" to highlight or shadow. Keep the scanner vertically to the object surface. Optimize the distance by the color range on the screen or on the scanner. Green color shows an appropriate distance.

Scan

Edit

Tips: Shift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right. The edit function is only activated after selecting data.

Finish

Save Point Cloud (ASC)

Mesh

Watertight / Unwatertight

Post Processing

Save Mesh (OBJ. STL. PLY. etc.)

Scanning Tips

Scan Mode Selection

Use Handheld Rapid Scan mode when:

• A fast scanning experience is needed;
• Objects with good geometry for feature alignment;
• Objects are hard to move or too big to stay on turntable for scanning.

Use Handheld HD Scan mode when:

• High accuracy and high resolution by handheld scanning is required;
• Objects are hard to move or too big to stay on turntable for scanning.

Use Fixed Scan with Turntable mode when:

• High accuracy and high resolution is required;
• Objects' footprint within 150mm which may not cover most coded targets on turntable;
• Weight under 5kg;
• Objects' footprint above 150mm with rich geometry features can also work in Fixed Scan with Turntable mode through feature alignment.

Use Fixed Scan without Turntable mode when:

• High accuracy and high resolution is required;
• Objects is too big or heavy to work on turntable.

Summary

Difficult to Scan

• Transparent objects like glasses
• Shining or highly reflective objects like mirrors

Solution

• Spray with white powder

Not Recommended

• Moving objects or vibrating objects
• Lattice structure with many small deep holes
• Hairy objects like human hair and fur

Technical Support

Register at support.shining3d.com for support or contact through:

Email: einscan_support@shining3d.com

Skype: einscan_support

For more videos of the scanners, please follow our YouTube channel “SHINING 3D”.

APAC Headquarters

Shining 3D Tech Co., Ltd.

Hangzhou, China

P: +86-571-82999050

Email: sales@shining3d.com

No. 1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China, 311258

EMEA Region

SHINING 3D Technology GmbH.

Stuttgart, Germany

P: +49-711-28444089

Email: sales@shining3d.com

Breitwiesenstraße 28, 70565, Stuttgart, Germany

Americas Region

SHINING 3D Technology Inc.

San Leandro, United States

P: +1415-259-4787

Email: sales@shining3d.com

2450 Alvarado St #7, San Leandro, CA 94577

Tampa, United States

Email: sales@shining3d.com

2805 W Busch Blvd, Suite 222 Tampa, FL 33618

www.shining3d.com

www.einscan.com