Schlage Multi Technology Readers Datasheet [MT11, MT15, MTK15, MTMS15, MTMSK15]

Schlage Multi Technology Readers Datasheet [MT11, MT15, MTK15, MTMS15, MTMSK15] Multi-technology readers   Overview Schlage® multi-technology readers are designed to simplify your access control solutions and allow a transition from existing population proximity or magnetic stripe to more secure encrypted card technology at your own pace—without having to change readers as new technologies are available. […]

Schlage Smart Credentials Datasheet

Schlage Smart Credentials Datasheet   Overview Schlage® offers a variety of smart credential technology options to fit the needs and budget of most every application. All smart credentials from Schlage are encrypted and secure, but also based on open, global standards, ensuring a future of headache-free flexibility and scalability. Schlage smart credentials offer a single […]

Schlage PB405/PB405S Electrified Dead Bolt Datasheet

PB405 and PB405S Electrified Powerbolts Overview The PB405 PowerBolt is a mortise, right angle deadbolt with a .61” diameter bolt and a .67″ throw. It is available fail-safe PB405 or fail-secure PB405S. PowerBolts install in the door frame for minimal impact to the door and a clean, cohesive opening Note: Electromechanical powerbolts not recommended where […]

Schlage MT20 Multi Technology Enrollment Reader User Manual

Enrollment Readers Overview Schlage® offers a comprehensive portfolio of electronic access control solution products. Create a simple enrollment process with the Schlage CRM2 magnetic stripe enrollment reader, Schlage CRP2 proximity enrollment reader or the Schlage MT20 USB multitechnology enrollment reader with ENGAGE technology. Features and benefits CRM2 Magnetic Stripe Credential Enrollment Reader and CRP2 Proximity […]

Schlage LM9200 Series Lock Installation Instructions

Schlage LM9200 Series Lock Installation Instructions LM9200 Product description and overview Two-point latching system that utilizes concealed cables to secure the opening at the top and bottom of the door. Available less bottom latch for “top latch only” applications. Intended for use in pair door applications where both leaves need to be active. Based on […]

Schlage Keypad Lock FE575 Installation Manual

Keypad Lock Model FE575 Installation Instructions Tools Needed Phillips screwdriver Tape Measure Pencil Optional Flathead Screwdriver Wood Block Hammer Prepare for Installation IMPORTANT NOTES DO NOT use a power drill for installation! Use a screwdriver to remove product from packaging. Install and test lock with door open to avoid being locked out. A. Check door […]

Passage Lever With Built-in Alarm FE10 User Manual

Passage Lever With Built-in Alarm FE10 User Manual – Optimized PDF Passage Lever With Built-in Alarm FE10 User Manual – Original PDF Related Manuals Schlage Keypad Entry with Built-in Alarm Instruction Manual USER’S GUIDE Keypad Entry with Built-in Alarm LOCK PARTS Keypad… Keypad Entry with Built-in Alarm FE576 Installation Instructions 24046435 Keypad Entry with Built-in […]

BE-Series Smart Deadbolts BE467F User Manual

BE-Series Smart Deadbolts BE467F User Manual – Optimized PDF BE-Series Smart Deadbolts BE467F User Manual – Original PDF Related Manuals Schlage Control Smart Deadbolts BE467F Datasheet Schlage Control™ Smart Deadbolts BE467F, Grade 2 Schlage Control™ Smart… Schlage Control Smart Deadbolt BE467F Installation Manual Schlage Control™ Smart Deadbolt with Engage Technology Installation Instructions Model… Schlage FE-Series […]

Schlage JD-Series One Side Keyed Deadbolt JD60/JD62/JD81 User Manual

                        JD-Series Models JD60, JD62, JD81 Door Type: Metal, Flat or Beveled Door Thickness: 1³⁄₈” (35 mm)–1³⁄₄” (44 mm) Faceplate: Square Corner, 1” (25 mm) wide Backsets: 2³⁄₈,” (60 mm), 2³⁄₄” (70 mm) For metal door installations, suitable reinforcement is required to support latch […]

Schlage FE575/FE595 Keypad Lever Preparation Instructions Manual

  FE575/FE595 Door Preparation Instructions For Door With No Holes Tools Needed Drill Bits Needed: ¹⁄₈”, ⁷⁄₈”, 1” 2¹⁄₈” Hole Saw Pencil Chisel 1. Measure Door Width If the door is thinner than 1³⁄₈” or thicker than 1³⁄₄”, then the lock will not fit properly on the door. 2 Mark Lock Centerline on Door Face […]