Multi Effects Processor Manuals & User Guides

VING Flybro FB-100 Multi Effects Processor Specifications Technical Specifications A/D/A Converter: 24-bit Sampling Frequency: 44.1 kHz SNR: 103dB Maximum Simultaneous Effects: 8 Preset Memory: 100 Presets Slots, 50 Factory Presets Analog Input Connections IN: 1/4" (6.35mm) Unbalanced (TS), IMQ Analog…

Multi-Effects Processor BT User Manual For Firmware V1.3.0 www.sonicake.com QME-10 Pocket Master Compact Multi Effects Processor ※ In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content,…

HOTONE GP-5 Multi Effects Processor Thank you for purchasing a VALETON product! X In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters and…

SPX-1000 Multi Effects Processor Specifications Product Model: SPX-1000 Connectivity: Bluetooth Charging: USB-C cable and Qi wireless charging pad Controls: Physical button on earbuds, touch area, charging case button Ear Tips: Small, medium, and large sizes included App Compatibility: iOS…

SONICAKE QME-10 Multi Effects Processor Product Usage Instructions LCD Display: The 1.77-inch color screen displays preset information, battery level, BT status, and other operational details. Device Controls: Use the VALUE/VOL knob to turn on the device or access the options…

Fractal Audio VP4 Compact Multi Effects Processor Controls The Main Display Footswitches & GIG Mode A convenient master footswitch setting called GIG MODE is enabled by default. It allows you to access Presets, Banks, Scenes, Effects, Channels, Tuner, and Tap Tempo. NOTE: The default press and hold options in “Gig Mode” cause effects and other footswitches to fire when you release the switch instead of when you press it down. To disable or customize press and hold, use the SETUP>Footswitches page. See your Owner's Manual for more. SETTING UP THE VP4 CAN BE USED FOR “PRE” OR “POST” FX IN A WIDE VARIETY OF SETUPS. THE UNIT HAS POP SUPPRESSION BUT AMPS AND SPEAKERS SHOULD STILL BE TURNED ON LAST, AND OFF FIRST. Input Levels The VP4 comes set for a typical guitar with hot pickups. If the…

PocketX EC7031 Guitar/Bass AMP Modeler Multi Effects Processor PREFACE Pocket)( is a portable and multifunctional Guitar/Bass effector. It has 80 editable Presets, the users also can edit and save the preset tones. it has a built-in battery, it can last…

FRACTAL AUDIO SYSTEMS VP4 Compact Multi Effects Processor Setup: Four Cable Method ("4CM") Four Cable Method, or "4CM," allows you to run two separate mono signal paths through the VP4: one between your guitar and amp for "PRE" effects like…

Bass Multi Effects Parameter Guide ME-90B Effects Effect signal chain The signal chain (how the effects are connected) on the ME-90B is shown below. The signal chain is automatically optimized to match the effect type that’s selected. You can change…

GE200 Pro Intelligent Multi Effects Processor Specifications Model: GE200 Pro / GE200 Pro Li Type: Intelligent Multi-Effects Power Supply: Power adapter meeting manufacturer specifications Display: 3.5" high-quality color LCD screen Effects: 286 advanced effect modules and models Storage: 20…