VING Flybro FB-100 Multi Effects Processor
Specifications
- Technical Specifications
- A/D/A Converter: 24-bit
- Sampling Frequency: 44.1 kHz
- SNR: 103dB
- Maximum Simultaneous Effects: 8
- Preset Memory: 100 Presets Slots, 50 Factory Presets
- Analog Input Connections
- IN: 1/4″ (6.35mm) Unbalanced (TS), IMQ
- Analog Output Connections
- OUT: 1/4″ (6.35mm) Balanced(TRS), 1000
- PHONES: 1/8″ (3.5mm) Stereo (TRS), 1000
- Digital Connections
- USB: USB 2.0 Type C Port
- USB Recording Specification
- Sample Rate: 44.1 kHz
- Bit Depth: 16-bit
- Size and Weight Dimensions: 140.3mm(W) x 115,1mm(D) x 63,65mm(H)
- Unit Weight: 405g
- Power
- Power Requirements: USB Type-C, 5V-2A
- Built-in lithium battery: 2000 mAh
DESCRIPTION
- 1.77″ LCD color screen, to display preset information, battery level, and other operational information
- VOL: Volume knob
- PARA / PATCH: Hold the PARA knob to enter the save menu; turn or press the PARA knob to select or adjust parameters, switch presets, etc
- BACK: Return
/ GLOBAL: Hold to turn on the device; Press to enter the Global menu- DRUM: Press to turn on/off the drum machine, hold to enter the Drum menu
- BT /
: Hold the Vocal Cut switch, Press to BT on/off; Press the “DRUM” + “BT” button at the same time to enter the TUNER
- USB: Connect to a mobile phone or computer for recording and charging
- OUT: 1/4″ (6.35mm) TRS Balanced output interface, used to connect the speaker and effector
1/8″ (3.5mm) TRS stereo output for plugging in headphones- Reset button: When the machine dies or abnormal operation fails, use the pin to press for power restart
- FS/EXP: 1/4″ (6.35mm) TRS for connecting an external expression pedal or footswitch Controller
- IN: 1/4″ (6.35mm) TS mono input for plugging in your instrument
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Product Multi-Effects
- Model Number/Fåi41S: FB-IOO
- FCC : 2BQHC-FBIOO
- Made in China
IC Caution:
- Radio Standards Specification RSS-Gen, issue 5
- This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | Flybro FB-100 Multi Effects Processor |
References
- User Manualmanual.tools
tiba-tiba mati dan tidak hidup lagi
Why did my VING Flybro FB-100 suddenly turn off and why won't it turn back on?
If your VING Flybro FB-100 has suddenly stopped working and will not turn on, please try the following troubleshooting steps based on the manual:
If the device remains unresponsive after charging and pressing the reset button, there may be an internal hardware fault requiring professional service.
Read the full Q&A page
kenapa Ving FB-100 saya tidak terbaca sebagai USB Audio di PC saya?
Why is my Ving FB-100 not recognized as a USB Audio device on my PC?
If your Ving Flybro FB-100 is not being recognized as a USB Audio device on your PC, please check the following troubleshooting steps based on the manual:
If the problem persists, try connecting to a different USB port on your PC, preferably a port directly on the motherboard rather than a USB hub.
Primary technical specifications for the USB interface are: USB 2.0 Type-C, 44.1kHz Sample Rate, and 16-bit Bit Depth.
Read the full Q&A page