Latch Manuals & User Guides

WRIGHT Universal Knob Latch Instruction Manual

January 20, 2026

WRIGHT Universal Knob Latch Specifications Hole Spacing 3" or 1-3/4" Spindle Hole 5/16" (7.94 mm) Minimum Bolt Engagement 1/4" Installation Instructions All Installation Hardware Included Please read enclosed instructions carefully before installation. Select desired hole pattern. Select either 3" hole…

Brand: WRIGHT

D and D Technologies SA-F13 LokkLatch Plus Locking Privacy Gate Gravity Latch Instruction Manual

November 10, 2025

D and D Technologies SA-F13 LokkLatch Plus Locking Privacy Gate Gravity Latch Product information Technical Details Brand ‎D&D TECHNOLOGIES Special Feature ‎Key Lock Lock Type ‎Key Lock Material ‎Metal Recommended Uses For the Product ‎outdoor Style ‎Traditional Color ‎Black Number…

Brand: D and D Technologies

Salto XS4 One S Door Detector Latch Installation Guide

September 7, 2025

Salto XS4 One S Door Detector Latch Installation Guide: Door Detector For XS4 Original | XS4 Original+ | XS4 One S with Latch (Wooden Doors) Introduction This guide provides instructions for installing the Door Detector for XS4 Original, XS4 Original+,…

Brand: SALTO

DOMETIC NRX Bottom Latch Installation Guide

August 12, 2025

Dometic NRX Bottom Latch  NRX Bottom Latch YOUR LOCAL DEALER dometic.com/dealer YOUR LOCAL SUPPORT dometic.com/contact YOUR LOCAL SALES OFFICE dometic.com/sales-offices A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC…

Brand: Dometic

Masimo Replacement Latch Owner’s Manual

July 4, 2025

Masimo Replacement Latch Reusable Not made with natural rubber latex Non-sterile Prior to using this accessory latch, the user should read and understand the directions for use for the Cable, the Sensor, the Device or Monitor, and these directions for…

Brand: MASiMO

D and D Technologies CSI724 Round Latch Owner’s Manual

April 11, 2025

D and D Technologies CSI724 Round Latch Specifications Gate Compatibility: Round Post and Gate Frame Gap Variance: 1 - 2 1/4 inches (25mm - 57mm) Tools Required: Electric or cordless drill (low clutch settings), Phillips No.1 screwdriver, 5/16 hex-head drill…

Brand: D and D Technologies

Nationwide Industries NW6244 Armor Latch Installation Guide

April 8, 2025

Nationwide Industries NW6244 Armor Latch Product Specifications Model: NW6244 Manufacturer: LinearGateOpeners Material: Metal Color: Silver Weight: Varies Product Usage Instructions Step 1: Install the Latch Handle Use a level to ensure proper alignment. Center the triangular locating notch on the…

Brand: NATIONWIDE INDUSTRIES

ALLEGION SCHLAGE HL Series Hospital Latch Instructions

March 10, 2025

ALLEGION SCHLAGE HL Series Hospital Latch Introduction The Schlage® HL Series hospital push/pull hardware The HL Series includes a full line of push/pull hardware that is ideal for healthcare and other institutional applications where ease of operation is needed –…

Brand: Allegion

SCHLAGE HL Series Hospital Latch User Guide

March 10, 2025

SCHLAGE HL Series Hospital Latch Specification Door Type: Wood or Composite, Flat or Beveled Door Thickness: 1¾” (44 mm) Faceplate: Square Corner, 11⁄8” (29 mm) wide Backsets: 2¾” (70 mm) NOTES: When cylinder application is used, paddle on key side…

Brand: Schlage

ALLEGION HL Series Hospital Latch Installation Guide

March 10, 2025

HL-Series Hospital Latch Models HL6-9000 Mortise HL Series Hospital Latch Door Type: Wood or Composite, Flat or Beveled Door Thickness:  1¾” (44 mm) Faceplate: Square Corner, 11⁄8” (29 mm) wide Backsets: 2¾” (70 mm) NOTES: When cylinder application is used,…

Brand: Allegion

LATCH Hub Quick Start Guide: Installation and Setup

quick start guide • August 22, 2025

A comprehensive quick start guide for installing and configuring the LATCH Hub. Learn about device setup, network connections (Ethernet and Wi-Fi), LED indicators, and FCC compliance.

Brand: LATCH

Latch C1 Runbook: Installation, Onboarding, and Troubleshooting Guide

manual • July 24, 2025

A comprehensive guide for the Latch C1 smart lock, covering installation, onboarding, best practices, and troubleshooting for common issues. Includes detailed steps for setup, access management, and resolving deadbolt, jamming, firmware, and power-related problems.

Brand: Latch

Latch Specification Guidelines Ver. 5.0

technical specification • July 24, 2025

This document provides detailed specifications for the Latch R Series, Latch Intercom, Latch Camera, Latch M Series, Latch M2 Series, Latch C Series, Latch C2 Deadbolt, Latch Hub, and Latch Water Sensor. It covers mechanical dimensions, environmental conditions, power requirements, communication protocols,…

Brand: Latch