Hakko Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Hakko products.

Tip: include the full model number printed on your Hakko label for the best match.

Hakko manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

HAKKO 999-252 Wireless Remote Control Instruction Manual

HAKKO 999-252 Wireless Remote Control Instruction Manual

February 15, 2024
HAKKO 999-252 Wireless Remote Control Instruction Manual Wireless Remote Control Instruction Manual Thank you for purchasing the HAKKO 999-252 Wireless Remote. Please be sure to review these instructions before you start. PACKING LIST AND PART NAMES 1 - Receiver Unit…
Brand: Hakko
HAKKO 371 Special Heater Instruction Manual

HAKKO 371 Special Heater Instruction Manual

February 1, 2024
HAKKO 371 Special Heater Product Information Specifications Model: [Model Name] Dimensions: [Dimensions] Weight: [Weight] Color: [Color] Power Source: [Power Source] Warranty: [Warranty] Description The [Product Name] is a versatile and user-friendly device designed to [Product Purpose]. It offers a wide…
Brand: Hakko
HAKKO 456 Soldering Iron User Manual

HAKKO 456 Soldering Iron User Manual

February 1, 2024
HAKKO 456 Soldering Iron Replacing the Heating Element * Please use the following item numbers when ordering parts. *Illustration: w/3 wired cord * *Specifications subject to change without notice. Disassemble the Soldering Iron Remove the Nut (A), Tip Enclosure (B),…
Brand: Hakko
HAKKO 455 Soldering Iron Instruction Manual

HAKKO 455 Soldering Iron Instruction Manual

February 1, 2024
HAKKO 455 Soldering Iron Replacing the Heating Element Please use the following item numbers when ordering parts Illustration; w/3 wired cord specifications subject to change without notice Disassemble the Soldering Iron Remove the Nut (A), Tip Enclosure (B), Tip (C),…
Brand: Hakko
HAKKO 652 Feed Controller Instruction Manual

HAKKO 652 Feed Controller Instruction Manual

February 1, 2024
HAKKO 652 Feed Controller Product Information The product is a versatile and high-performance device designed to meet the needs of various users. It is built with advanced technology and features that enhance its functionality and usability. The product is known…
Brand: Hakko
HAKKO 950 SMD Hot Tweezer Instruction Manual

HAKKO 950 SMD Hot Tweezer Instruction Manual

February 1, 2024
HAKKO 950 SMD Hot Tweezer Specifications Name: HAKKO 950 SMD Hot Tweezer Power Consumption: 50W Temperature Range: 200-400 C / 392-752 F Tip to Ground Resistance: Under 2 ohms Tip to Ground Potential: Under 2mV (TYP.0.6mV) Heating Element: Ceramic Heater…
Brand: Hakko
HAKKO 918 Soldering Iron Mach Instruction Manual

HAKKO 918 Soldering Iron Mach Instruction Manual

February 1, 2024
HAKKO 918 Soldering Iron Mach PRODUCT USAGE  Turn the Nut(A) counterclockwise and remove the Nut, Tip Enclosure(B), Tip(C), Element Support PipeD) in thatorder.  Turn the Nipple Support Screw(G) counterclockwise and remove it. Pull the Nipple(E) away from the Handle(H). Gently…
Brand: Hakko
HAKKO 920 Soldering Iron User Guide

HAKKO 920 Soldering Iron User Guide

February 1, 2024
HAKKO 920 Soldering Iron INSTRUCTION Bad Cord: Check the continuity between the tree prongs on the power cord and the cord connections on the PCB in the handle. See Figure 1. If the resistance is above 200 then the power…
Brand: Hakko
HAKKO 920 Mach Heater Instruction Manual

HAKKO 920 Mach Heater Instruction Manual

February 1, 2024
HAKKO 920 Mach Heater Instruction Manual INSTALATION INSTRUCTION Turn the Nut(A) counterclockwise and remove the Nut, Tip Enclosure(B), Tip(C), Element Support Pipe(D) in thatorder. Turn the Nipple Support Screw (G) counterclockwise and remove it. Pull the Nipple(E) away from the…
Brand: Hakko
HAKKO 851 SMD Rework System Instruction Manual

HAKKO 851 SMD Rework System Instruction Manual

Instruction Manual • October 15, 2025
Comprehensive instruction manual for the HAKKO 851 SMD Rework System, covering specifications, safety warnings, operating procedures for soldering and desoldering, heating element replacement, parts lists, and temperature distribution charts.
Brand: HAKKO
HAKKO FX-805 Control Software Installation and Operation Guide

HAKKO FX-805 Control Software Installation and Operation Guide

Software Manual • September 24, 2025
This guide provides detailed instructions for installing and operating the HAKKO FX-805 Control Software. It covers software installation steps, connecting the FX-805 station to a PC, software updates, and a comprehensive overview of the software's features including temperature control, calibration, and parameter…
Brand: HAKKO
Hakko T11-B Conical Soldering Tip Instruction Manual for FX-901

Hakko T11-B Conical Soldering Tip Instruction Manual for FX-901

T11-B • December 5, 2025 • Amazon
Comprehensive instruction manual for the Hakko T11-B conical soldering tip, designed for use with the Hakko FX-901 soldering iron. This guide covers setup, operation, maintenance, troubleshooting, and detailed specifications to ensure optimal performance and longevity of your soldering tip.
Brand: Hakko
Hakko B1087 Cleaning Pin User Manual

Hakko B1087 Cleaning Pin User Manual

B1087 • November 9, 2025 • Amazon
This user manual provides instructions for the Hakko B1087 Cleaning Pin, a 1.0mm wire, 4.0-inch silver metal pin designed for cleaning Hakko 817 and 809 desoldering guns. Includes setup, operating, maintenance, and troubleshooting guidance.
Brand: Hakko
Hakko CHP TR-20-TM Micro Soft Wire Cutter, Reverse Mount, Flush-cut, 2.0mm Hardened Carbon Steel Construction, 48-Degree Angled Jaw, 8mm Jaw Length, 22 Maximum Gauge Cutting Capacity, IC Pin Compatible

Hakko CHP TR-20-TM Micro Soft Wire Cutter, Reverse Mount, Flush-cut, 2.0mm Hardened Carbon Steel Construction, 48-Degree Angled Jaw, 8mm Jaw Length, 22 Maximum Gauge Cutting Capacity, IC Pin Compatible

TR-20-TM • August 27, 2025 • Amazon
The Hakko CHP TR-20-TM reverse-cut micro soft-wire cutter has an 8mm long jaw set at a 48-degree reverse angle for cutting integrated circuit (IC) pins up to 22 AWG (0.6mm). The reverse angled head enables closely-spaced IC pins to be cut. The…
Brand: Hakko
Hakko CHP DP-15-N Depaneling Tool User Manual

Hakko CHP DP-15-N Depaneling Tool User Manual

DP-15-N • August 26, 2025 • Amazon
Official user manual for the Hakko CHP DP-15-N Depaneling Tool. Includes detailed instructions for setup, operation, maintenance, troubleshooting, and full product specifications for efficient PCB separation.
Brand: Hakko