Detection Module Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Detection Module products.

Tip: include the full model number printed on your Detection Module label for the best match.

Detection Module manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

invt ICDM-10 3PH Current Detection Module User Manual

February 6, 2026

invt ICDM-10 3PH Current Detection Module Preface Thank you for choosing the INVT ICDM-10 3PH current detection module. This module is used for AC current detection of GD880 series general-purpose inverter products and must be used with the GD880 series…

Brand: invt

invt FL3321,FL3322 Bridge Input Detection Module User Guide

January 23, 2026

invt FL3321,FL3322 Bridge Input Detection Module Specifications Item Specifications Power supply External input rated voltage 24VDC (-15%–+20%) External input rated current 0.5A Backplane bus rated output voltage 5VDC (4.75VDC–5.25VDC) Backplane bus current consumption 120mA…

Brand: invt

JamAlert LT-2962 Cellular Detection Module Installation Guide

July 19, 2025

JAMALERT CELLULAR DETECTION MODULE Installation Guide Figure 1: Jam Alert Cellular Detection Module DESCRIPTION The JamAlert module is a cellular frequency jamming detector. The module has two onboard outputs that can be connected to zones on a panel or used to…

Brand: JamAlert

Hi-Link HLK-LD2451 Vehicle Status Detection Module User Manual

December 7, 2024

Hi-Link HLK-LD2451 Vehicle Status Detection Module Product Information Specifications Product Name: HLK-LD2451 Vehicle Status Detection Module Manufacturer: Shenzhen Hi-Link Electronic Co., Ltd Sensing Technology: FMCW FM continuous wave radar signal processing Sensing Distance: Up to 100m Output: Speed, angle, distance,…

Brand: Hi-Link

invt FK1100 Dual Channel Incremental Encoder Detection Module User Guide

September 16, 2024

invt FK1100 Dual Channel Incremental Encoder Detection Module Product Usage Instructions The FL6112 dual-channel incremental encoder detection module supports quadrature A/B signal input with an input voltage of 24V. It also supports x1/x2/x4 frequency multiplication modes. Each channel has a…

Brand: invt

Winsen ZC61 Vehicle Hydrogen Gas Leakage Detection Module User Manual

March 1, 2024

Winsen ZC61 Vehicle Hydrogen Gas Leakage Detection Module Specifications Model: ZC61 Detection Theory: Catalytic combustion Detecting Gas: Hydrogen (H2) Supply Voltage: DC 12V (9~16V) Measuring Range: CAN 3s (T80) Detection Accuracy: 10s Output Signal: CAN Response Time: 3 seconds Recovery…

Brand: Winsen

Winsen ZPS20 Air Quality Detection Module User Manual

February 17, 2024

Winsen ZPS20 Air Quality Detection Module Product Information Specifications Model: ZPS20 Detection Gas: VOC (Volatile Organic Compounds) Output: I2C Working Voltage: - Working Current: - Warm-up Time: - Response Time: - Recovery Time: - Detection Range: - VOC Index Output:…

Brand: Winsen

JOYE STR-XBYH3-021 Range Detection Module User Manual

January 8, 2024

JOYE STR-XBYH3-021 Range Detection Module User Manual Product Overview Operation Step Insert the blackpluginto the white socket. Connect the external 5V power supply to the DC Jack. Insert the TTL-To-USB converter to the USB interface of PC. Open the PC…

Brand: JoYe

DVP 271 Ground Fault Detection Module Installation Guide

December 4, 2023

DVP 271 Ground Fault Detection Module Installation Guide GET STARTED The 271 is a ground fault detection module that detects ground faults without harming the control panel. The module connects to a zone and the earth ground to determine if…

Brand: DVP

Winsen ZP201 Refrigerant Gas Detection Module User Manual

November 18, 2023

Winsen ZP201 Refrigerant Gas Detection Module User Manual Statement This manual’s copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system,…

Brand: Winsen