CONTROLLER MODULE Manuals & User Guides

Schneider Electric TM173O Programmable Logic Controller Module Specifications Reference: TM173O Display: Digital Outputs Digital Inputs: 6 Analog Outputs: 5 Analog Inputs: 6 Communication Ports: CAN Expansion bus, USB (type C), RS-485 serial ports Supply: 24Vac/Vdc Product Usage Instructions Safety Instructions…

KOHLER 1564943-K14-A Anthem Plus System Controller Module Specifications Model Number: 1564943-K14-A Manufacturer: Kohler Co. Connectivity: Wi-Fi, Ethernet Control Interface: Web page Product Usage Instructions Begin Setup Press the arrow in the bottom right corner to navigate through the setup steps.…

MARQUARDT GE1 Body Controller Module Technical Description Editor: X. Gong Department: SDYE-A-SH Tel: 86 21 58973302- 9412 Email: Xun.gong@marquardt.com Original version: 04.01.2023 Revision: 04.01.2023 Version: 1.0 Functional description The GE1 (body controller module) is a component of a driving authorization…

BCM-0000-B Battery Controller Module Installation Guide BCM-0000-B Battery Controller Module Safety Notes NOTICE! Installation must only be carried out by authorized personnel.  The BCM-0000-B can only be used with panel controllers FPA-1200-MPC and MPC-xx00-B with software versions from 2.1 onwards.…

Continental CMKG2 Body Controller Module Product Information The CMKG2 (Body Controller Module) is a component of a driving authorization system for a car. It is part of a system that includes the vehicle key, the UHF antenna module, and the…

CP Electronics EBR-DIN-AC Area Controller Module Overview The Area Controller allows all RAPID lighting control modules on a floor to communicate with one another, as well as allowing communication between floors and/or a computer front-end package. It also allows the…

User Manual RGBCCT6-MZ Important: Read all instructions prior to installation. RGB+CCT Controller Module Included Parts - RGB+CCT Controller Module Specifications RGBCCT6-MZ operating voltage range 12-24 VDC radio frequency 2.4 GHz electrical connection hardwire or coaxial power connector with 5.5 mm…

TRANE Tracer MP503 Input Output Controller Module Introduction The Tracer MP503 input/output (I/O) module is a configurable, multi-purpose device used to provide data monitoring and binary control as part of a building automation system (BAS). Communication between the module and…

TRANE Tracer MP.501 Controller Module User Manual Introduction The Tracer MP.501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating, ventilation, and air conditioning (HVAC) equipment. The controller can operate as a standalone device or as…

MGC ANC-4000 Audio Network Controller Module Description The ANC-4000 Audio Network Controller provides audio interface microphone and control on the network system and storage up to 30 minutes of Alert, Evacuation, or other voice messages and tones. The ANC-4000 mounts…