MSI CD270 Multi Node Compute Server

Vipimo

• Mfano: G52-S3862X1
• CPU: CD270-S3071-X2
• Drive Bays: 12 x Hot-Swap 2.5 U.2 Drive Bays (PCIe 5.0 x4, NVMe)
• Memory: Supports DDR5 DIMM slots compatible with RDIMMs, 3DS-RDIMM, and MRDIMMs

CD270-S3071-X2
Server System Quick Start Guide

Maelezo

1	COM USB Type-A Port	5	Hali ya Mfumo wa LED
2	USB 2.0 Aina-A Bandari	6	UID LED Button (default)/ System Reset Button*
3	1000Base-T Ethernet Port (for mgmt.)	7	System Power LED Button
4	Mini-DisplayPort	8	OCP 3.0 Mezzanine Card Slot

* The UID LED button can also function as system reset button, configured using jumper J1_1.

System Node Tray Removal

Muhimu

• Power Off Node First: Removing a powered-on node will cause immediate power loss.
• Independent Power: Each node operates with its own power supply. Turning off one node does not affect others.

Hatua za Kuondoa

1. Pull the thumb latch aside to release the node.
2. Grasp the handle to gently slide the node out of its slot.

Support the weight of the node while removing it to prevent accidental drops.

CPU

Single Intel® Xeon® 6900P series processors, TDP up to 500W per node.

Ufungaji wa CPU na Heatsink

Kumbukumbu
Each node supports 12 DDR5 DIMM slots, compatible with RDIMMs, 3DS-RDIMM and MRDIMMs

Aina ya DIMM	Mzunguko wa Max	Max Capacity per DIMM
RDIMM/ 3DS-RDIMM	6400 MT/s (1DPC)	GB 256
MRDIMM	8800 MT/s (1DPC)

DDR5 Only DIMM Configuration Diagram ( for Intel® Xeon® 6900P Series)

⚠ Muhimu

• Lazima kuwe na angalau DDR5 DIMM kwa kila soketi.
• Mipangilio ya kumbukumbu ya DDR5 inahitaji aina sawa za DIMM, safu, kasi na msongamano.
• Kuchanganya wachuuzi, zisizo za 3DS/3DS RDIMM, 9×4 RDIMM, au x8/x4 DIMM haziruhusiwi.
• Kuchanganya DIMM na masafa tofauti ya uendeshaji haijathibitishwa. Wakati masafa yanatofautiana, mfumo hubadilika kuwa kasi ya chini kabisa ya kawaida.

Bodi ya Mfumo

On Board Connectors, Jumpers and LEDs

Jina	Maelezo
Bodi ya Mfumo
JPICPWR_1~4	12V PICPWR power connectors (12-pin)
JPICPWR_5	12V PICPWR power connectors (6-pin)
JPWR1~2	4-pin power connectors
JMCIO1~9	MCIO 8i connectors (PCIe 5.0 x8)
M2_1~2	Nafasi za M.2 (M Key, PCIe 5.0 x2, 2280/ 22110)
OCP0	OCP 3.0 mezzanine slot (PCIe 5.0 x16, NCSI supported)
DC-SCM	DC-SCM 2.0 edge slot
JCOOL2	4-Pin liquid leak detection header
JCOOL3	6-Pin liquid cooling header
JUSB3	USB 3.2 Gen 1 connector (5 Gbps, for 2 USB ports)
JFP1~2	DC-MHS control panel header
JPDB_MGNT	PDB management header
JIPMB1	IPMB header (debug only)
JVROC1	VROC connector (debug only)
FBP_I2C_1~3	Vichwa vya I2C
JCHASSIS1	Kichwa cha kuingilia chasisi
JPASSWORD_C_1	Password clear jumper (default pin 1-2, Normal)
JUART_SEL1	UART BMC/ CPLD select jumper (default pin 1-2, UART BMC to CPU)
JTAG_SEL2	JTAG select jumper (default pin 2-3, BMC to CPU)
JBAT1	MBP/ I3C select jumper (default pin 1-2, MBP)
JBAT2	RTC clear jumper (default pin 1-2, Normal)
JBAT7	PESTI flash select jumper (default pin 2-3, PESTI2 flash)
LED_H1, LED_L1	LED za utatuzi wa Port 80
MGT1 DC-SCM Module
TPM	SPI TPM Header (for TPM20-IRS)
M2_1	M.2 Slot (M Key, for ROT1)
J_JTAG	Manual programming header (debug only)
J3D2	Force BMC update jumper (default pin 1, Normal)
J3C1	FRU jumper (default pin 2-3, FRU normal operated)
J3C5	JTAG SW jumper (default pin 2-3, JTAG SW enable)
J1_1	ID/ Reset button select jumper (default pin 1-2, ID Button)
LED1	LED ya mapigo ya moyo ya BMC

Maswali Yanayoulizwa Mara Kwa Mara

• Q: Can I mix different types of DIMMs in this system?
  A: No, mixing vendors, non-3DS/3DS RDIMMs, 9×4 RDIMMs, or x8/x4 DIMMs is not allowed. It is recommended to use identical DIMMs for optimal performance.
• Q: What is the maximum memory capacity supported per DDR5 DIMM?
  A: The maximum capacity supported per DDR5 DIMM is 256 GB.

Nyaraka / Rasilimali

MSI CD270 Multi Node Compute Server [pdf] Mwongozo wa Mtumiaji X2, S386-S3071-v1.0-QG, G52-S3862X1, CD270 Multi Node Compute Server, CD270, Multi Node Compute Server, Compute Server, Server

Marejeleo

• Mwongozo wa Mtumiaji