Bukana ea Mosebelisi
VLVWIP2000-ENC
VLVWIP2000-DEC
JPEG2000 AVoIP Encoder le Decoder
Litokelo tsohle li sirelelitsoe
Phetolelo: VLVWIP2000-ENC_2025V1.0
Phetolelo: VLVWIP2000-DEC_2025V1.0
JPEG2000 AVoIP Encoder le Decoder
Selelekela
Bala bukana ea mosebelisi ka hloko pele u sebelisa sehlahisoa. Lits'oants'o tse bontšitsoeng bukeng ena ke tsa tšupiso feela. Mefuta e fapaneng le litlhaloso li itšetlehile ka sehlahisoa sa sebele.
Bukana ena ke ea litaelo tsa ts'ebetso feela, ka kopo ikopanye le morekisi oa lehae bakeng sa thuso ea tlhokomelo. Boitekong bo sa feleng ba ho ntlafatsa sehlahisoa, re na le tokelo ea ho fetola mesebetsi kapa liparamente ntle le tsebiso kapa tlamo. Ka kopo, sheba barekisi ho fumana lintlha tsa morao-rao.
Phatlalatso ea FCC
Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. E lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlano le tšitiso e kotsi ho kenngoeng ha khoebo.
Ts'ebetso ea thepa ena sebakeng sa bolulo e kanna ea baka tšitiso, moo mosebelisi ka litšenyehelo tsa bona a tla tlameha ho nka mehato efe kapa efe e ka hlokahalang ho lokisa tšitiso.
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke moetsi li tla hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
TS'IRELETSO MATS'ELI
Ho netefatsa ts'ebetso e ntle ka ho fetisisa ea sehlahisoa, ka kopo bala litaelo tsohle ka hloko pele u sebelisa sesebelisoa. Boloka bukana ena bakeng sa litšupiso tse ling.
- Hlakola thepa ka hloko 'me u boloke lebokose la pele le thepa ea ho paka bakeng sa thomello e ka bang teng nakong e tlang.
- Latela mehato ea ts'ireletso ea mantlha ho fokotsa kotsi ea mollo, ts'oaetso ea motlakase le likotsi ho batho.
- Se ke oa qhaqha ntlo kapa ua fetola mojule. E ka etsa hore motho a tsohe motlakase kapa a che.
- Ho sebelisa lisebelisoa kapa likarolo tse sa fihlelleng litlhoko tsa lihlahisoa ho ka baka tšenyo, ho senyeha kapa ho se sebetse hantle.
- Fetisetsa lits'ebeletso tsohle ho basebetsi ba tšoanelehang.
- Ho thibela kotsi ea mollo kapa tšabo, u se ke ua pepesetsa yuniti ho pula, mongobo kapa ho kenya sehlahisoa sena haufi le metsi.
- U se ke ua beha lintho leha e le life tse boima holim'a thapo ea katoloso haeba ho ka ba le extrusion.
- Se ke oa tlosa ntlo ea sesebelisoa kaha ho bula kapa ho tlosa ntlo ho ka u beha kotsing ea voltage kapa likotsi tse ling.
- Kenya sesebelisoa sebakeng se nang le moea o motle ho qoba tšenyo e bakiloeng ke mocheso o feteletseng.
- Beha mojule hole le maro.
- Ho qhalla ka tlung ho ka baka mollo, ts'okelo ea motlakase kapa tšenyo ea lisebelisoa. Haeba ntho kapa mokelikeli o oela kapa o tšolohela ntlong, ntša mojule hang-hang.
- U se ke ua sotha kapa ua hula ka matla lipheletsong tsa thapo ea optical. E ka baka ho se sebetse hantle.
- Se ke oa sebelisa metsi kapa aerosol cleaners ho hloekisa yuniti ena. Kamehla hula motlakase ho sesebelisoa pele o hloekisa.
- Hlakola thapo ea motlakase ha e tlohetsoe e sa sebelisoe nako e telele.
- Tlhahisoleseding e mabapi le ho lahla lisebelisoa tse lahliloeng: u se ke ua chesa kapa ua kopanya le litšila tse tloaelehileng tsa ntlo, ka kopo li tšoare e le litšila tse tloaelehileng tsa motlakase.
Kea leboha ha u rekile sehlahisoa sena
Bakeng sa tshebetso e ntlafetseng le polokeho, ka kopo bala ditaelo tsena ka hloko pele o hokela, o sebedisa kapa o lokisa sehlahiswa sena. Ka kopo boloka bukana ena bakeng sa tšebeliso ea nako e tlang.
Sesebelisoa sa ts'ireletso ea surge se khothalelitsoe
Sehlahisoa sena se na le likarolo tsa motlakase tse ka 'nang tsa senngoa ke li-spikes tsa motlakase, li-surges, ho ts'oaroa ha motlakase, ho otla ha mabone, joalo-joalo. Ho khothaletsoa haholo ho sebelisa lisebelisoa tsa ts'ireletso ea surge bakeng sa ho sireletsa le ho lelefatsa bophelo ba lisebelisoa tsa hau.
1. Selelekela
Sehlahisoa sena se ipapisitse le theknoloji ea JPEG2000. E kopanya koung ea Copper le Fiber port ka har'a lebokose le le leng. Kenyelletso ea encoder e ts'ehetsa ho fihla ho 4K60 4:4:4, ho kenya molumo kapa ho ntša. Sephetho sa li-decoder se tšehetsa ho fihla ho 4K60 4:4:4, ho ntšoa ha molumo. Sehlahisoa se tšehetsa mosebetsi oa ho khutlisa molumo oa ARC/eARC/S/PDIF/Analog, hape o tšehetsa USB2.0/KVM/Camera, 1G Ethernet, bidirectional RS-232, IR le POE tse peli. Litaolo tsa mekhoa ea baeti ea RS-232, IR, CEC lia tšehetsoa. E hahelletsoeng ka har'a likou tse peli tsa RELAY le likou tse peli tsa I/O bakeng sa taolo ea likhokahano. Mokhoa oa Dante AV-A oa tšehetsoa haeba sehlahisoa se kentsoe laesense.
E hahelletsoeng ka MJPEG Substream e ts'ehetsang litaelo tse ngata tsa API ho fihlela tlhophiso e feto-fetohang e na le thuso bakeng sa lisebelisoa tsa taolo ea mokha oa boraro ho etella pele.view litaba tsa video.
Sistimi e thehiloe ho Linux bakeng sa nts'etsopele ea software, e fana ka mekhoa ea taolo e feto-fetohang, e thehiloeng marang-rang a bohlale a 1G Ethernet Switch.
2. Likarolo
☆ HDCP 2.2 e lumellana
☆ Tšehetsa 18Gbps bandwidth ea video
☆ Qeto ea ho kenya le ho tsoa ho video e fihla ho 4K60 4:4:4, joalo ka ha ho hlalositsoe ho HDMI 2.0b
☆ Sebaka sa phetisetso ea lipontšo se ka eketsoa ho fihla ho 328ft / 100m ka cable ea CAT5E/6/6A/7
☆ Fetisetsa video, molumo oa analog / digital, IR, RS-232, CEC le USB holim'a Ethernet
☆ Kopanya boema-kepe ba Copper le boema-kepe ba Fiber ka har'a lebokose le le leng
☆ Mosebetsi oa ho khutlisa molumo oa ARC/eARC/S/PDIF/Analog
☆ Mokhoa oa Dante AV-A oa tšehetsoa haeba laesense e kentsoe
☆ Ho hlophisoa ha mocha ka li-buttons tse ka pele le skrine ea LED
☆ Boema-kepe bo hahelletsoeng ba liteishene tse peli tsa RELAY le likou tse peli tsa I/O bakeng sa taolo ea likhokahano
☆ Ts'ehetsa mesebetsi ea unicast le multicast
☆ Ts'ehetso ea ntlha-to-point, matrix ea video le mesebetsi ea lebota la video (lebota la video le tšehetsa ho fihla ho 9 × 9)
☆ Tsamaiso e bohlale ea sehlopha sa lebota la video
☆ Ts'ehetsa Substream ea MJPEG ea nako ea nnete peleview
☆ 1G Ethernet switch
☆ Ts'ehetso ea ts'ebetso ea POE
☆ E hahiloeng web tlhophiso le taolo ea leqephe, Telnet le SSH hape
☆ HDMI liforomo tsa molumo: LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master
☆ Moralo oa marang-rang o bohlale bakeng sa ho kenya habonolo le ho tenyetseha habonolo
3. Likahare tsa Sephutheloana
| Qty | Ntho |
| 1 | 4K60 holim'a IP 1GbE Encoder |
| 1 | IR Receiver cable (1.5 metres) |
| 1 | Thapo ea IR Blaster (limithara tse 1.5) |
| 3 | 3-pin 3.81mm Phoenix sehokelo |
| 2 | 4-pin 3.81mm Phoenix sehokelo |
| 1 | 12V / 2.5A adapta ea motlakase |
| 2 | Ho phahamisa tsebe |
| 4 | Sekurufu sa mochini (KM3*4) |
| 1 | Bukana ea Mosebelisi |
or
| Qty | Ntho |
| 1 | 4K60 holim'a IP 1GbE Decoder |
| 1 | IR Receiver cable (1.5 metres) |
| 1 | Thapo ea IR Blaster (limithara tse 1.5) |
| 3 | 3-pin 3.81mm Phoenix sehokelo |
| 2 | 4-pin 3.81mm Phoenix sehokelo |
| 1 | 12V / 2.5A adapta ea motlakase |
| 2 | Ho phahamisa tsebe |
| 4 | Sekurufu sa mochini (KM3*4) |
| 1 | Bukana ea Mosebelisi |
4. Litlhaloso
Setsebi
| HDMI tletlebo | HDMI 2.0b |
| HDCP e lumellana | HDCP 2.2 |
| Motlakase oa video | 18Gbps |
| Video Compression Standard | JPEG2000 |
| Bandwidth ea Network Network | 1G |
| Qeto ea Video | Ho fihla ho 4K@60Hz 4:4:4 |
| Botebo ba Mmala | Kenyelletso: 8/10/12-bit Tlhahiso: 8-bit |
| Sebaka sa Mmala | RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| Mefuta ea Audio Audio ea HDMI | LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master |
| Sebaka sa phetiso | 100M CAT5E/6/6A/7 |
| Boemo ba IR | 12V ea kamehla, 5V ea boikhethelo |
| Khafetsa ea IR | Wideband 20K - 60KHz |
| Tšireletso ea ESD | IEC 61000-4-2: ± 8kV (ho ntša moea-gap) & ± 4kV (Tshenolofatso ea khokahanyo) |
Khokahano
| Encoder | Kenyelletso: 1 x HDMI IN [Mofuta oa A, 19-pin female] 1 x L/R AUDIO IN [3-pin 3.81mm Phoenix connector] Moputso: 1 x HDMI OUT [Mofuta oa A, 19-pin female] 1 x L/R AUDIO OUT [3-pin 3.81mm Phoenix connector] 1 sehokelo sa Phoenix IF 1 x SpPD sehokelo sa XO 232 RS-3 [3.81-pin 1mm Phoenix connector] 45 x LAN (POE) [RJ1 jack] 1 x FIBER [Optical fibre slot] 2.0 x USB 4 HOST [Mofuta oa B, 2-pin female] 2.0 x USB 4 DEVICE [Mofuta-A, 2pin PhoenixS 3.81] 2. IO [3.81mm Phoenix connector] 1 x IR IN [3.5mm Audio Jack] 1 x IR OUT [3.5mm Audio Jack] |
| Setlankane | Kenyeletso: 1 x SPDIF IN [Sehokelo sa modumo o optical] 1 x L/R AUDIO IN [3-pin 3.81mm Phoenix connector] Sephetho: 1 x HDMI OUT [Mofuta A, 19-pin female] 1 x L/R AUDIO OUT [3-pin 3.81mm Phoenix connector]1 Phoenix connector] 232 RS 3.81mm1. LAN (POE) [Jaka ea RJ45] 1 x FIBER [Slot ea fiber ea Optical] 2 x USB 1.1 DEVICE [Mofuta-A, 4-pin female] 2 x USB 2.0 DEVICE [Mofuta-A, 4-pin female] 2 x RELAYS [3.81mm Phoenix connector] 2 x Phoenix x3.81 sehokelo IN1 DIGITAL3.5 IO Phoenix DIGITAL1. [3.5mm Audio Jack] XNUMX x IR OUT [XNUMXmm Audio Jack] |
Mechini
| Matlo | Sekoahelo sa tšepe |
| Mmala | Ntsho |
| Litekanyo | Encoder/Dekhouta: 204mm [W] x 136mm [D] x 25.5mm [H] |
| Boima ba 'mele | Sekhouto: 631g, Sekhakhothara: 626g |
| Phepelo ea motlakase | Kenyeletso: AC100 – 240V 50/60Hz, Sephetho: DC 12V/2.5A (Litekanyetso tsa US/EU, CE/FCC/UL tse netefalitsoeng) |
| Tšebeliso ea Matla | Sekhouto: 8.52W, Sekoahelo: 7.08W (Boholo.) |
| Mocheso oa ho sebetsa | 32 - 104 ° F / 0 - 40 ° C |
| Mocheso oa polokelo | -4 - 140 ° F / -20 - 60 ° C |
| Mongobo o Batlang | 20 - 90% RH (ha ho condensing) |
| Qeto / Bolelele ba Cable | 4K60 - Maoto / Limithara | 4K30 - Maoto / Limithara | 1080P60 - Maoto / Limithara |
| HDMI IN / TSOELA | 16ft / 5M | 32ft / 10M | 50ft / 15M |
| Tšebeliso ea thapo ea "Premium High Speed HDMI" e khothaletsoa haholo. | |||
5. Tsamaiso ea Ts'ebetso le Mesebetsi
Phanele ea Encoder ea 5.1
| Che. | Lebitso | Tlhaloso ea Mosebetsi |
| 1 | RETS'ELISITSOE | Ka mor'a hore u sebelise mochine, tobetsa 'me u tšoare konopo ea RESET ho fihlela POWER LED le LINK LED flash ka nako e le' ngoe, lokolla konopo ho tsosolosa sesebelisoa ho litlhophiso tsa fektheri. |
| 2 | Matla a LED (Khubelu) |
|
| 3 | LINKA LED (Tala) | Boemo ba khokahano ea LED.
|
| 4 | Leseli la LED | E bonts'a ID ea Encoder e le ea kamehla. E bonts'a likhetho tse tsamaellanang tsa lits'ebetso tsa tlhophiso nakong ea ho seta litlhophiso tsa Encoder. |
| 5 | CH KHETHA | E sebelisoa ho seta Encoder ID le litlhophiso tse ling. |
| 6 | Sesebediswa sa USB 2.0 | Hokela ho lisebelisoa tsa USB 2.0. |
| 7 | USB HOST | Sehokelo sa USB-B bakeng sa ho hokela PC. |
| 8 | IR TSOA | Boema-kepe ba tlhahiso ea IR. Boemo ba IR bo ka hlophisoa ho 5V kapa 12V (ka ho sa feleng) ka likonopo tsa phanele. |
| 9 | IR IN | Boema-kepe ba ho kenya lets'oao la IR. Boemo ba IR bo ka hlophisoa ho 5V kapa 12V (ka ho sa feleng) ka likonopo tsa phanele. |
| 10 | RELAYS I DIGITAL IO | VCC: Phallo ea matla (12V kapa 5V configurable), boholo ho 12V @50mA, 5V@100mA loading. Sephetho sa kamehla ke 12V. RELAYS: 2 channel low-voltagli-ports tsa relay, sehlopha se seng le se seng se ikemetse ebile se arohane, ho fihla ho 1A 30VDC loading. Mabitso a khaotsoe ka mokhoa oa kamehla. DIGITAL IO: Boema-kepe ba 2 ba GPIO, bakeng sa taolo ea tlhahiso ea boemo ba dijithale kapa tlhahlobo ea ho kenya (ho fihla ho 12V boemo ba ho lemoha). Mokhoa oa ho laola tlhahiso (mokhoa oa kamehla, boemo bo tlase joalo ka tlhahiso ea kamehla) kapa mokhoa oa ho lemoha o kentsoeng oa lokisoa. The DIGITAL IO ka hare ho hula-up voltage latela VCC. Mokhoa oa ho laola sephetho: a. Boemo bo phahameng ka ho fetisisa ba ho mamella sink ke 50mA ha u ntša boemo bo tlase. b. Ha VCC e le 5V mme boemo bo phahameng bo hlahisoa, matla a ho khanna a hajoale ke 2mA. c. Ha VCC e le 12V 'me boemo bo phahameng bo hlahisoa, matla a ho khanna hona joale ke 5mA. Mokhoa oa ho lemoha lintho tse kentsoeng: a. Ha VCC e le 5V, DIGITAL IO e huloa ho fihla ho 5V ka hare ka 2.2K ohm resistor. b. Ha VCC e le 12V, DIGITAL IO e huloa ho fihla ho 12V ka hare ka mochine oa 2.2K ohm. |
| 11 | RS-232 | RS-232 serial port, e tšehetsang taelo ea RS-232 ea ho feta le taolo ea boema-kepe ea lehae. |
| 12 | MUDIO KA TSELA | AUDIO IN: Boema-kepe ba molumo oa analog, molumo o ka kenngoa ka har'a lets'oao la HDMI bakeng sa ho fetela ho HDMI tlhahiso le molumo o tsoang ho Decoder, kapa o lokolloe ke boema-kepe ba AUDIO OUT ho Encoder. |
| AUDIO OUT: Boema-kepe ba molumo oa analog. E ka ntša molumo o ntšitsoeng boema-kepeng ba HDMI IN (haeba ho ka ba le LPCM) . Hape e ka hlahisa molumo o fetisoang ho tsoa boema-kepeng ba AUDIO IN ea Decoder ka mokhoa oa unicast (khokahanyo e tobileng ea ntlha-to-point). | ||
| 13 | TS'ELISO SPDIF | Boema-kepe ba tlhahiso ea matšoao a S/PDIF. E ka hlahisa molumo oa ARC kapa S / PDIF o khutlisitsoeng ho tsoa ho Decoder ha Encoder le Decoder ka bobeli li hlophisitsoe ka mokhoa o ts'oanang ho mokhoa oa ho khutlisa molumo oa ARC kapa S / PDIF (Beha ka Lebokose la Bolaoli kapa litaelo tsa API ka mokhoa oa Multicast; Beha li-button tsa phanele e ka pele ka mokhoa oa unicast). |
| 14 | HDMI TSOA | HDMI local loop output port, e hokahaneng le sesebelisoa sa ponts'o sa HDMI joalo ka TV kapa monitor. |
| 15 | HDMI-IN | Boemakepe ba ho kenya letshwao la HDMI, bo hoketsweng ho sesebediswa sa mohloli wa HDMI jwalo ka Blu-ray Player kapa Set-top box ka thapo ya HDMI. |
| 16 | FIBER | Hokela le optical fiber module, 'me u fetisetse matšoao ho Decoder ka thapo ea fiber ea optical ka ho toba kapa ka Phetoho. |
| 17 | LAN (POE) | 1G LAN port, hokela netweke Phetoho ho theha sistimi e ajoang. Tlhokomeliso: Ha sesebelisoa sa marang-rang se fana ka phepelo ea motlakase ea POE, adaptara ea DC 12V ha e hloke ho sebetsa yuniti. |
| 18 | Lesupa la Letshwao la Lintlha lamp (Bosehla) | Ho benya ha leseli: Ho na le phetiso ea data. ▪ Lebone le tima: Ha ho phetiso ea data. |
| 19 | Letshwao la Letshwao la Khokahano lamp (Botala) | Lebone le butswe: Thapo ya netweke e hoketswe ka tlwaelo. ▪ Ho tima: Mohala oa marang-rang ha oa hokelloa hantle. |
| 20 | DC 12V | Sesebelisoa se ka tsamaisoa ka mekhoa e 'meli:
Ha Switch e tšehetsa mosebetsi oa POE, motlakase oa DC ha o hlokehe. |
Tlhaloso ea ts'ebetso ea skrine ea LED le likonopo tsa CH SELECT (Bakeng sa Encoder).
1, ID ea ENC: Kamora hore sistimi e buloe, skrini sa LED sa Encoder se tla bonts'a ID ea ENC (000 ka boiketsetso haeba e sa hlophisoa).
2, Aterese ea IP: Tobetsa 'me u tšoare konopo ea UP ka metsotsoana e 5, skrine ea LED ea Encoder e tla hlaha ka tatellano "IPx", "xxx", "xxx", "xxx", "xxx", e leng mokhoa oa IP le aterese ea IP ea Encoder.
3, Mokhoa oa tlhophiso: Tobetsa 'me u tšoare likonopo tsa UP + DOWN ka nako e le' ngoe bakeng sa metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa tlhophiso ka "CFN" e hlahang skrineng sa LED.
4, Litlhophiso tsa ID ea sesebelisoa: Ka mor'a ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la pele ka nomoro ea hajoale ea ID (mohlala, 001) e hlahang skrineng sa LED (000 ka ho sa feleng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa litlhophiso tsa ID, moo nomoro ea ID (mohlala 001) e skrineng sa LED e tla benya ka 1Hz, ebe u tobetsa konopo ea PHAHAMA/TLASE ho khetha ID ea sesebelisoa eo u e batlang (ID ea mefuta: 000 ~ 762), ebe o tobetsa o hatelle likonopo tsa UP + DOWN ho netefatsa ho emisa metsotsoana e 5. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Hlokomela: ID ea sesebelisoa e ke ke ea fetoloa ka mokhoa oa Lebokose la Molaoli.
5, Litlhophiso tsa EDID: Ka mor'a ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/DOWN ho kenya leqephe la bobeli ka "E00" (eo "E" e bolelang EDID, "00" ho EDID ID) kapa "COP" (e bontšang kopi ea EDID) e hlahang skrineng sa LED (E15 ka ho sa feleng).
Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa litlhophiso tsa EDID, moo nomoro ea ID ea EDID (mohlala E01) e skrineng sa LED e tla benya ka 1Hz, ebe u tobetsa konopo ea UP/DOWN ho khetha ID ea EDID eo u e batlang, ebe u tobetsa le ho tšoara likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa tlhophiso le ho emisa ho khantša.
ID e tsamaisanang le EDID ke e latelang:
| EDID ID | EDID Tlhaloso |
| E00 | 1080P_Stereo_Audio_2.0_SDR |
| E01 | 1080P_DolbyDTS_5.1_SDR |
| E02 | 1080P_HD_Audio_7.1_SDR |
| E03 | 1080I_Stereo_Audio_2.0_SDR |
| E04 | 1080I_DolbyDTS_5.1_SDR |
| E05 | 1080I_HD_Audio_7.1_SDR |
| E06 | 3D_Stereo_Audio_2.0_SDR |
| E07 | 3D_DolbyDTS_5.1_SDR |
| E08 | 3D_HD_Audio_7.1_SDR |
| E09 | 4K2K30_444_Stereo_Audio_2.0_SDR |
| E10 | 4K2K30_444_DolbyDTS_5.1_SDR |
| E11 | 4K2K30_444_HD_Audio_7.1_SDR |
| E12 | 4K2K60_420_Stereo_Audio_2.0_SDR |
| E13 | 4K2K60_420_DolbyDTS_5.1_SDR |
| E14 | 4K2K60_420_HD_Audio_7.1_SDR |
| E15 | 4K2K60_444_Stereo_Audio_2.0_SDR |
| E16 | 4K2K60_444_DolbyDTS_5.1_SDR |
| E17 | 4K2K60_444_HD_Audio_7.1_SDR |
| E18 | 4K2K60_444_Stereo_Audio_2.0_HDR_10-bit |
| E19 | 4K2K60_444_DolbyDTS_5.1_HDR_10-bit |
| E20 | 4K2K60_444_HD_Audio_7.1_HDR_10-bit |
| E21 | DVI_1280x1024 |
| E22 | DVI_1920x1080 |
| E23 | DVI_1920x1200 |
Hlokomela: Tabeng ea mokhoa oa ho hokahanya, pele o sebelisa mosebetsi oa kopi oa EDID, li-codec tsohle li hloka ho hlophisoa ho CA1 mode ea unicast, 'me ka mor'a ho beha, thapo ea HDMI ea Decoder e hloka ho kenngoa hape ho tlaleha EDID ea TV ho Encoder.
6, Litlhophiso tsa mokhoa oa IR: Ka mor'a ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/DOWN ho kenya leqephe la boraro ka "IR2" (eo "IR" e bolelang IR le "2" ho 12V) e hlahang skrineng sa LED (IR2 ka ho feletseng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo IR1 kapa IR2) e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mofuta oa IR, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya.
Likhetho tse tsamaellanang tsa IR ke tse latelang:
IR1: terata ea 5V IR
IR2: terata ea 12V IR
7, Litlhophiso tsa mokhoa oa ho kenya molumo: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP / DOWN ho kenya leqephe la bone ka "HDI / ANA" e hlahang skrineng sa LED (HDI ka ho feletseng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa litlhophiso, moo mokhoa oa ho khutlisa molumo (HDI/ANA) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya.
Likhetho tse tsamaellanang tsa mokhoa oa ho kenya molumo ke tse latelang:
HDI: Ho kenya molumo oa HDMI
ANA: Ho kenya molumo oa analoge
8, Litlhophiso tsa mokhoa oa IP: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP / TLAS ho kenya leqephe la bohlano le nang le "IP1 / IP2 / IP3" e hlahang skrineng sa LED (IP3 ka ho feletseng).
Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo IP mode (IP1/IP2/IP3) e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa IP mode ke tse latelang:
IP1: Mokhoa oa IP o tsitsitseng (Aterese ea IP ea kamehla: 169.254.100.254)
IP2: DHCP IP mode
IP3: Mokhoa oa IP oa Auto (Karolo ea marang-rang e abetsoeng kamehla: 169.254.xxx.xxx)
Tlhokomeliso: Mokhoa oa IP o ke ke oa fetoloa ka mokhoa oa Lebokose la Bolaoli.
9, Litlhophiso tsa mokhoa oa Fiber/Copper: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP / DOWN ho kenya leqephe la botšelela le nang le "CPP / FIB" e hlahang skrineng sa LED (CPP ka ho feletseng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo mofuta oa Fiber/Copper (CPP/FIB) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse lumellanang tsa Fiber / Copper ke tse latelang:
CPP: Mokhoa oa koporo
FIB: Mokhoa oa Fiber
10, Litlhophiso tsa mokhoa oa Multicast: Kamora ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la bosupa ka "CA1/CA2" e hlahang skrineng sa LED (CA1 ka boiketsetso). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo mokhoa oa multicast (CA1/CA2) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa multicast ke tse latelang:
CA1: Mokhoa oa Unicast
CA2: Mokhoa oa Multicast
11, Litlhophiso tsa mokhoa oa ho khutlisa molumo: Kamora ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la borobeli le nang le "C2C/A2A" e hlahang skrineng sa LED (C2C ka boiketsetso). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo mokhoa oa ho khutlisa molumo (C2C/A2A) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o hatelle likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa mokhoa oa ho khutlisa molumo ke tse latelang:
C2C: Molumo oa eARC/ARC kapa S/PDIF o tsoang ho Decoder o fetisetsoa morao koung ea HDMI IN kapa SPDIF OUT ea Encoder.
A2A: Molumo oa analoge o kentsoeng ho Decoder o fetisetsoa morao koung ea audio ea AUDIO OUT ea Encoder.
Hlokomela:
(1) Mokhoa oa ho khutlisa molumo o ke ke oa fetoloa ka li-buttons tsa pele ho Controller Box kapa Multicast mode.
(2) Ke feela ha Encoder le Decoder ka bobeli li behiloe ka mokhoa o ts'oanang ho C2C/A2A audio return mode ka unicast mode, ho khutla ha molumo ho ka phethahala.
(3) Mokhoa oa ho khutlisa molumo oa A2A o fumaneha feela ka mokhoa oa unicast.
(4) Nako ea ho sebelisa ARC, ARC audio ampLifier ho Encoder HDMI IN port le ARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
Nako ea ho sebelisa eARC, audio ea eARC ampLifier ho Encoder HDMI IN port le eARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
(5) Kamora ho kenya mekhoa e fapaneng ea litlhophiso, o ka ts'oara konopo ea DOWN ho tsoa sebopeho sa hajoale kapele, kapa haeba o sa etse ts'ebetso efe kapa efe nakong ea metsotsoana ea 5, e tla khutlela sebopehong se fetileng.
5.2 Phanele ea li-decoder
| Che. | Lebitso | Tlhaloso ea Mosebetsi |
| 1 | RETS'ELISITSOE | Ka mor'a hore u sebelise mochine, tobetsa 'me u tšoare konopo ea RESET ho fihlela POWER LED le LINK LED flash ka nako e le' ngoe, lokolla konopo ho tsosolosa sesebelisoa ho litlhophiso tsa fektheri. |
| 2 | Matla a LED (Khubelu) |
|
| 3 | LINKA LED (Tala) | Boemo ba khokahano ea LED.
|
| 4 | Leseli la LED | E bonts'a ID ea Encoder e khethiloeng e le ea kamehla. E bonts'a likhetho tse tsamaellanang tsa lits'ebetso tsa tlhophiso nakong ea ho seta litlhophiso tsa Decoder. |
| 5 | CH KHETHA | E sebelisoa ho seta ID ea Decoder le litlhophiso tse ling. |
| 6 | Sesebediswa sa USB 1.1 | Hokela ho lisebelisoa tsa USB 1.1, joalo ka Keyboard kapa Toeba. |
| 7 | Sesebediswa sa USB 2.0 | Hokela ho lisebelisoa tsa USB 2.0, joalo ka USB flash disk kapa Khamera ea USB. |
| 8 | IR TSOA | Boema-kepe ba tlhahiso ea IR. Boemo ba IR bo ka hlophisoa ho 5V kapa 12V (ka ho sa feleng) ka likonopo tsa phanele. |
| 9 | IR IN | Boema-kepe ba ho kenya lets'oao la IR. Boemo ba IR bo ka hlophisoa ho 5V kapa 12V (ka ho sa feleng) ka likonopo tsa phanele. |
| 10 | RELAYS I DIGITAL IO | VCC: Phallo ea matla (12V kapa 5V e ka hlophisoa), boholo ho isa ho 12V@50mA, 5V@100mA loading. Sephetho sa kamehla ke 12V. RELAYS: 2 channel low-voltagli-ports tsa relay, sehlopha se seng le se seng se ikemetse ebile se arohane, ho fihla ho 1A 30VDC loading. Mabitso a khaotsoe ka mokhoa oa kamehla. DIGITAL IO: Boema-kepe ba 2 ba GPIO, bakeng sa taolo ea tlhahiso ea boemo ba dijithale kapa tlhahlobo ea ho kenya (ho fihla ho 12V boemo ba ho lemoha). Mokhoa oa ho laola tlhahiso (mokhoa oa kamehla, boemo bo tlase joalo ka tlhahiso ea kamehla) kapa mokhoa oa ho lemoha o kentsoeng oa lokisoa. The DIGITAL IO ka hare ho hula-up voltage latela VCC. Mokhoa oa ho laola sephetho: a. Boemo bo phahameng ka ho fetisisa ba ho mamella sink ke 50mA ha u ntša boemo bo tlase. b. Ha VCC e le 5V mme boemo bo phahameng bo hlahisoa, matla a ho khanna a hajoale ke 2mA. c. Ha VCC e le 12V 'me boemo bo phahameng bo hlahisoa, matla a ho khanna hona joale ke 5mA. Mokhoa oa ho lemoha lintho tse kentsoeng: a. Ha VCC e le 5V, DIGITAL IO e huloa ho fihla ho 5V ka hare ka 2.2K ohm resistor. b. Ha VCC e le 12V, DIGITAL IO e huloa ho fihla ho 12V ka hare ka mochine oa 2.2K ohm. |
| 11 | RS-232 | RS-232 serial port, e tšehetsang taelo ea RS-232 ea ho feta le taolo ea boema-kepe ea lehae. |
| 12 | MUDIO KA TSELA | AUDIO IN: Boema-kepe ba molumo oa analog, molumo o ka fetisetsoa ho Encoder AUDIO OUT ka mokhoa oa unicast (khokahanyo e tobileng ea ntlha-to-point). |
| AUDIO OUT: Boema-kepe ba molumo oa analog. E hlahisa molumo o tšoanang oa o ho HDMI OUT haeba sebopeho sa molumo e le LPCM. | ||
| 13 | SPDIF IN | Boema-kepe ba ho kenya lets'oao la S/PDIF. |
| 14 | HDMI TSOA | Boema-kepe ba HDMI, bo hoketsoeng sesebelisoa sa ponts'o sa HDMI joalo ka TV kapa sehlahlobi. |
| 15 | FIBER | Hokela le optical fiber module, 'me u fumane matshwao ho tswa ho Encoder ka thapo ya optical fiber ka kotloloho kapa ka Switch. |
| 16 | LAN (POE) | 1G LAN port, hokela netweke Phetoho ho theha sistimi e ajoang. Tlhokomeliso: Ha sesebelisoa sa marang-rang se fana ka phepelo ea motlakase ea POE, adaptara ea DC 12V ha e hloke ho sebetsa yuniti. |
| 17 | Lesupa la Letshwao la Lintlha lamp (Bosehla) |
|
| 18 | Letshwao la Letshwao la Khokahano lamp (Botala) |
|
| 19 | DC 12V | Sesebelisoa se ka tsamaisoa ka mekhoa e 'meli:
Ha Switch e tšehetsa mosebetsi oa POE, motlakase oa DC ha o hlokehe. |
Tlhaloso ea ts'ebetso ea skrine ea LED le likonopo tsa CH SELECT (Bakeng sa Decoder).
1, Khokahano ea ENC: Kamora hore sistimi e buloe, skrine ea LED ea Decoder e tla bonts'a 000 ka ho sa feleng haeba e sa hlophisoa. Tobetsa konopo ea UP/TLASE ka ho toba ho khetha ID ea mocha ea Encoder e hoketsoeng (lefapha la ID: 000~762) ho phethela khokahanyo.
2, Aterese ea IP: Tobetsa 'me u tšoare konopo ea UP ka metsotsoana e 5, skrine ea LED ea Decoder e tla hlaha ka tatellano "IPx", "xxx", "xxx", "xxx", "xxx", e leng mokhoa oa IP le aterese ea IP ea Decoder.
3, Mokhoa oa tlhophiso: Tobetsa 'me u tšoare likonopo tsa UP + DOWN ka nako e le' ngoe bakeng sa metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa tlhophiso ka "CFN" e hlahang skrineng sa LED.
4, Litlhophiso tsa ID ea sesebelisoa: Ka mor'a ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la pele ka nomoro ea hajoale ea ID (mohlala, 001) e hlahang skrineng sa LED (000 ka ho sa feleng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa litlhophiso tsa ID, moo nomoro ea ID (mohlala 001) e skrineng sa LED e tla benya ka 1Hz, ebe u tobetsa konopo ea PHAHAMA/TLASE ho khetha ID ea sesebelisoa eo u e batlang (ID ea mefuta: 000 ~ 762), ebe o tobetsa o hatelle likonopo tsa UP + DOWN ho netefatsa ho emisa metsotsoana e 5. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Hlokomela: ID ea sesebelisoa e ke ke ea fetoloa ka mokhoa oa Lebokose la Molaoli.
5, Litlhophiso tsa ho eketsa tlhahiso: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP/DOWN ho kenya leqephe la bobeli ka "S00" (eo "S" e bolelang ho Scaling, le "00" ho ID ea resolution) e hlahang skrineng sa LED (S00 ka ho sa feleng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo Sxx e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha ID eo u e batlang, ebe o tobetsa le ho ts'oara likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya.
Litlhophiso tsa sekhahla li thathamisitsoe ka tlase:
| Ho phahamisa Sxx | Qeto Tlhaloso |
| S00 | karohano |
| S01 | 1080P50 |
| S02 | 1080P60 |
| S03 | 720P50 |
| S04 | 720P60 |
| S05 | 2160P24 |
| S06 | 2160P30 |
| S07 | 2160P50 |
| S08 | 2160P60 |
| S09 | 1280x1024 |
| S10 | 1360x768 |
| S11 | 1440x900 |
| S12 | 1680x1050 |
| S13 | 1920x1200 |
6, Litlhophiso tsa mokhoa oa IR: Ka mor'a ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/DOWN ho kenya leqephe la boraro ka "IR2" (eo "IR" e bolelang IR le "2" ho 12V) e hlahang skrineng sa LED (IR2 ka ho feletseng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo IR1 kapa IR2) e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mofuta oa IR, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya.
Likhetho tse tsamaellanang tsa IR ke tse latelang:
IR1: terata ea 5V IR
IR2: terata ea 12V IR
7, Litlhophiso tsa ho khutlisa molumo oa eARC/ARC kapa S/PDIF: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP/DOWN ho kenya leqephe la bone ka "ARC/SPD" e hlahang skrineng sa LED (ARC ka ho sa feleng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya litlhophiso tsa ho khutlisa molumo, moo mokhoa oa ho khutlisa molumo (ARC/SPD) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Likhetho tse tsamaellanang tsa mokhoa oa ho khutlisa molumo ke tse latelang:
ARC: eARC/ARC audio return (Molumo o tsoang boema-kepe ba HDMI OUT oa Decoder o fetisetsoa hape koung ea HDMI IN ea Encoder.)
SPD: Ho khutlisa molumo oa S/PDIF (Molumo o tsoang boema-kepe ba S/PDIF IN oa Decoder o fetisetsoa morao koung ea S/PDIF OUT ea Encoder.)
Hlokomela:
(1) Mokhoa oa ho khutlisa molumo o ke ke oa fetoloa ka li-buttons tsa pele ho Controller Box kapa Multicast mode.
(2) Ke feela ha Encoder le Decoder li se li setiloe ho C2C audio return mode, eARC/ARC kapa S/PDIF audio return e ka phethahala.
(3) Nako ea ho sebelisa ARC, ARC audio ampLifier ho Encoder HDMI IN port le ARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
Nako ea ho sebelisa eARC, audio ea eARC ampLifier ho Encoder HDMI IN port le eARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
8, Litlhophiso tsa mokhoa oa IP: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP / TLAS ho kenya leqephe la bohlano le nang le "IP1 / IP2 / IP3" e hlahang skrineng sa LED (IP3 ka ho feletseng).
Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo IP mode (IP1/IP2/IP3) e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa IP mode ke tse latelang:
IP1: Mokhoa oa IP o tsitsitseng (Aterese ea IP ea kamehla: 169.254.100.253)
IP2: DHCP IP mode
IP3: Mokhoa oa IP oa Auto (Karolo ea marang-rang e abetsoeng kamehla: 169.254.xxx.xxx)
Hlokomela: Mokhoa oa IP o ke ke oa fetoloa ka mokhoa oa Lebokose la Bolaoli.
9, Litlhophiso tsa mokhoa oa Fiber/Copper: Ka mor'a ho kenya mokhoa oa ho hlophisa, tobetsa konopo ea UP / DOWN ho kenya leqephe la botšelela le nang le "CPP / FIB" e hlahang skrineng sa LED (CPP ka ho feletseng). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo mokhoa oa Copper/Fiber (CPP/FIB) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse lumellanang tsa Fiber / Copper ke tse latelang:
CPP: Mokhoa oa koporo
FIB: Mokhoa oa Fiber
10, Litlhophiso tsa mokhoa oa Multicast: Kamora ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la bosupa ka "CA1/CA2" e hlahang skrineng sa LED (CA1 ka boiketsetso). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo Multicast mode (CA1/CA2) e skrineng sa LED e tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o tšoare likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa multicast ke tse latelang:
CA1: Mokhoa oa Unicast
CA2: Mokhoa oa Multicast
11, Litlhophiso tsa mokhoa oa ho khutlisa molumo: Kamora ho kenya mokhoa oa tlhophiso, tobetsa konopo ea UP/TLASE ho kenya leqephe la borobeli le nang le "C2C/A2A" e hlahang skrineng sa LED (C2C ka boiketsetso). Tobetsa 'me u hatelle likonopo tsa UP + DOWN metsotsoana e 5, ebe u lokolla ho kenya mokhoa oa li-setting, moo mokhoa oa ho khutlisa molumo (C2C/A2A) skrineng sa LED o tla benya ka 1Hz, ebe o tobetsa konopo ea UP/DOWN ho khetha mokhoa, ebe o tobetsa o hatelle likonopo tsa UP + DOWN metsotsoana e 5 ho netefatsa boemo le ho emisa ho benya. Kamora ho seta, yuniti e tla qala hape ka bo eona.
Likhetho tse tsamaellanang tsa mokhoa oa ho khutlisa molumo ke tse latelang:
C2C: Molumo oa eARC/ARC kapa S/PDIF o tsoang ho Decoder o fetisetsoa morao koung ea HDMI IN kapa S/PDIF OUT ea Encoder.
A2A: Molumo oa analoge o kentsoeng ho Decoder o fetisetsoa morao koung ea audio ea AUDIO OUT ea Encoder.
Hlokomela:
(1) Mokhoa oa ho khutlisa molumo o ke ke oa fetoloa ka li-buttons tsa pele ho Controller Box kapa Multicast mode.
(2) Ke feela ha Encoder le Decoder ka bobeli li behiloe ka mokhoa o ts'oanang ho C2C/A2A audio return mode ka unicast mode, ho khutla ha molumo ho ka phethahala.
(3) Mokhoa oa ho khutlisa molumo oa A2A o fumaneha feela ka mokhoa oa unicast.
(4) Nako ea ho sebelisa ARC, ARC audio ampLifier ho Encoder HDMI IN port le ARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
Nako ea ho sebelisa eARC, audio ea eARC ampLifier ho Encoder HDMI IN port le eARC TV ho Decoder HDMI OUT port li lokela ho sebelisoa.
(5) Kamora ho kenya mekhoa e fapaneng ea litlhophiso, o ka ts'oara konopo ea DOWN ho tsoa sebopeho sa hajoale kapele, kapa haeba o sa etse ts'ebetso efe kapa efe nakong ea metsotsoana ea 5, e tla khutlela sebopehong se fetileng.
Tlhaloso ea 5.3 IR Pin
IR BLASTER MOAMOHI
IR PHATLALA
MOAMOHI MOHAPI
(1) Letšoao la IR
(2) Ho thethefatsa
(3) Matla a 12V
6. Rack Mounting Taelo
6.1 6U V2 Rack Mounting
Sehlahisoa sena se ka kenngoa ka rack e tloaelehileng ea 6U V2 (Ka kopo ikopanye le mofani oa thepa ea hau bakeng sa thekiso ea rack ea 6U V2). Mehato ea ho ntlafala ke e latelang:
Mohato oa 1: Sebelisa li-screw tse kenyellelitsoeng ho lokisa litsebe tse peli tse ntseng li phahama holim'a sehlahisoa, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
Mohato oa 2: Kenya sehlahisoa ka litsebe tse ntseng li hola ka har'a rack ea 6U V2 (li-unit tsa 6/8/10 li ka kenngoa ka holimo), joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
Mohato oa 3: Sebelisa li-screw ho lokisa litsebe tse ntseng li hola holim'a rack ho phethela ho kenya, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
6.2 1U V2 Rack Mounting
Sehlahisoa sena le sona se ka kenngoa ka har'a rack e tloaelehileng ea 1U V2 (li-unit tse 2 li ka kenngoa ka holimo). Mehato ea ho ntlafala ke e latelang:
Mohato oa 1: Sebelisa li-screw tse kenyellelitsoeng ho lokisa li-rack tse peli tsa 1U V2 lihlahisoa tse peli ka ho latellana, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
Mohato oa 2: Sebelisa li-screw ho lokisa li-rack tse peli tsa 1U V2 hammoho, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
Mohato oa 3: Kenya li-screw pakeng tsa li-rack tse peli tsa 1U V2, e le hore lihlahisoa tse peli li kenngoe ka har'a rack ea 1U V2, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase:
7. Kenyelletso ea Ts'ebetso ea MJPEG Substream
7.1 MJPEG Substream Preview/Tlhahiso ka Web Leqephe
Sehlahisoa se tšehetsa ho bapala MJPEG Substream khomphuteng ka software e tsamaellanang joalo ka Sebapali sa media sa VLC, ka nako e le 'ngoe o ka fihlella Web leqepheng la ho lokisa MJPEG Substream.
Latela mehato e ka tlase ho ea peleview le ho lokisa MJPEG Substream.
Mohato oa 1: Hokela Encoder, Decoder le PC ho Switcher e tšoanang, ebe o hokela sesebelisoa sa mohloli oa HDMI le phepelo ea motlakase. Setšoantšo sa khokahano se bonts'oa ka tlase.
- Sebapali sa Blu-ray
- Adapter ea Matla
- Encoder
- PC
- Phetoho ea 1G Ethernet
- Setlankane
Mohato oa 2: Kenya sesebelisoa sa ho hlahloba protocol ea bonjour (joalo ka zeroconfService Browser) ho PC ho fumana aterese ea IP ea Encoder/Decoder.
Nka zeroconfServiceBrowser joalo ka mehlengample. Ka mor'a ho bula software, u ka khetha "Workgroup Manager" ho Litšebeletso tsa Browser, khetha lebitso la Host in Service-Instances, 'me u fumane aterese ea IP sebakeng sa Aterese ho Instance-Info.
Hlokomela:
(1) Fesetere e k'honeng e ka tlase e ka letsohong le letšehali e bonts'a mabitso a Host a lisebelisoa tsohle tsa marang-rang a hajoale.
(2) Fesetere e hukung e ka tlase ho le letona e bonts'a lebitso la Host, aterese ea IP le nomoro ea Port ea sesebelisoa.
(3) Lebitso la Moamoheli oa Encoder le qala ka AST-ENC; Lebitso la Host la Decoder le qala ka AST-DEC.
Mohato oa 3: Beha aterese ea IP ea PC sebakeng se tšoanang sa marang-rang se nang le aterese ea IP ea Encoder/Decoder e fumanehang mohatong oa 2.
Mohato oa 4: Ho ea ka aterese ea IP ea Encoder/Decoder e fumanoang ka sesebelisoa sa ho hlahloba protocol ea bonjour, kenya "http://IP:PORT/?action=stream" ho web sebatli ho PC. Phatlalatso ea MJPEG e tla hlahisoa ka qeto ea kamehla, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
Mohato oa 5: Fetola qeto ea aterese ea IP ea Encoder/Decoder ka mokhoa o latelang.
http://IP:PORT/?action=stream&w=x&h=x&fps=x&bw=x&as=x&mq=x
- BALA: [Ka boikhethelo] bophara ba setšoantšo. Ka lipikselse. 'x' e bolela hore ha ho phetoho.
Phetoho ke 640. - BOLEMO: [Ka boikhethelo] bolelele ba setšoantšo. Ka lipikselse. 'x' e bolela hore ha ho phetoho.
Phetoho ke 360. - FRAMERATE: [Ka boikhethelo] sekhahla sa foreimi ea substream.
Yuniti: fps (frame ka motsotsoana). 'x' e bolela hore ha ho phetoho. Ka ho feletseng ke 30. - BW: [Ka boikhethelo] boholo ba sephethephethe sa sephethephethe se tlase.
Yuniti: Kbps (Kbits ka motsotsoana). 'x' e bolela hore ha ho phetoho. Kamehla ke 8000 (8Mbps). - AS: [Ka boikhethelo] tiisetso ea likarolo. 'x' e bolela hore ha ho phetoho. Hangata ke 0.
- 0: fetela ho seo "WIDTH" le "HEIGHT" li hlophisitsoeng
- 1: [A1 feela] boloka karolo ea mantlha le sebaka bohareng ba tlhahiso (letterboxing kapa pillarboxing)
- MINQ: [Ka boikhethelo] bonyane nomoro ea boleng ba setšoantšo. Range: 10, 20, …, 90, 100, maemo a holimo a bolela boleng bo holimo ba setšoantšo. 'x' e bolela hore ha ho phetoho. Boleng ba kamehla ke 10. Nomoro e tlase ea boleng ba mokhanni oa taolo ea bandwidth. Haeba boleng bo le tlase ho feta boleng ba MINQ, mokhanni o tla theola foreimi ka ho khutlisa boholo ba 0 file.
Kamora ho fetoha, kenya aterese e ncha ea Encoder/Decoder IP ho web sebatli ho PC, MJPEG Substream e tla hlahisoa ka qeto e lakatsehang, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
7.2 VLC Media Player Taelo
Taba ea pele, etsa mohato oa 1 ~ 3 joalo ka ha ho hlalositsoe Khaolong ea 7.1, ebe u bula VLC media player ho PC. Ka kopo, sheba letšoao le latelang.
Tobetsa "Media> Open Network Stream"
Kamora ho tobetsa khetho ea "Open Network Stream", leqephe le latelang le tla hlaha.
Kenya marang-rang a Substream a MJPEG URL, ebe o tobetsa "Bapala” konopo.
Khetha "Lisebelisoa> Boitsebiso ba Codec", fensetere ea pop-up e tla bonts'a 'me e u bonts'e leseli la Phallela, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
Khetha "Lisebelisoa> Boitsebiso ba Codec> Lipalo-palo” ho hlahloba Bitrate ea hajoale.Ka kopo, sheba setšoantšo se latelang.
Tlhokomeliso: Bitrate e phaphametse holimo le tlase ha u e hlahloba. Ena ke ntho e tloaelehileng.
8. Fetola Mohlala
Sesebelisoa sa marang-rang se sebelisoang ho theha sistimi se lokela ho ts'ehetsa likarolo tse ka tlase:
- Mofuta oa lera 3/netweke e laoloang Switch.
- Gigabit bandwidth.
- 8KB bokhoni ba foreimi ea jumbo.
- IGMP e qhekella.
Mefuta e latelang ea Switch e khothaletsoa haholo.
| Moetsi | Nomoro ea Mohlala |
| CISCO | CISCO SG500 |
| CISCO | TSOHLE letoto |
| HUAWEI | S5720S-28X-PWR-LI-AC |
| ZyXEL | GS2210 |
| TLOTLISO | AMS-4424P |
9. 4K holim'a IP System Control
Sehlahisoa sena se ka laoloa ke Controller Box kapa molaoli oa motho oa boraro. Bakeng sa lintlha tse mabapi le taolo ea 4K holim'a IP, ka kopo sheba buka ea mosebelisi ea "Video over IP Controller".
10. Kopo Example
- ENC
- DVD
- Lebokose la Taolo
- Routa (boikhethelo)
- PC
- Phetoho ea 1G Ethernet
- 4 × DEC
- Lebota la Video
- DEC
- TV
Hlokomela:
(1) Bakeng sa mokhoa oa kamehla oa IP oa Control LAN port ea Controller Box ke DHCP, PC e boetse e hloka ho hlophisoa ho "Fumana aterese ea IP ka ho toba", 'me ho hlokahala seva sa DHCP (mohlala, router ea marang-rang) tsamaisong.
(2) Haeba ho se na seva sa DHCP tsamaisong, 192.168.0.225 e tla sebelisoa e le aterese ea IP ea Control LAN port. U hloka ho beha aterese ea IP ea PC hore e be karolong e tšoanang ea marang-rang. Bakeng sa mohlalaample, beha aterese ea IP ea PC joalo ka 192.168.0.88.
(3) U ka fihlella Web GUI ka ho kenya Control LAN port aterese ea IP (192.168.0.225) kapa URL “http://controller.local” sebatli sa komporo ea hau.
(4) Ha ho na tlhoko ea ho tsotella litlhophiso tsa boema-kepe ba Video LAN ea Lebokose la Molaoli, li laoloa ke Controller ka bo eona (Default).
(5) Ha Network Switch e sa tšehetse PoE, Encoder, Decoder le Controller Box e lokela ho tsamaisoa ke adaptara ea motlakase ea DC.
Mantsoe a HDMI le HDMI High-Definition Multimedia interface, le HDMI Logo ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a HDMI Licensing LLC United States le dinaheng tse ding.
Tšebeletso ea bareki
Ho khutlisetsoa ha sehlahisoa ho Tšebeletso ea Bareki ho bolela tumellano e felletseng ea lipehelo le lipehelo kamora moo. Ho na le lipehelo le maemo li ka fetoloa ntle le tsebiso pele.
1) Tiisetso
Nako e lekanyelitsoeng ea tiisetso ea sehlahisoa e behiloe lilemo tse tharo.
2) Boemo
Lipehelo tsena le lipehelo tsa Ts'ebeletso ea Bareki li sebetsa ho litšebeletso tsa bareki tse fanoeng bakeng sa lihlahisoa kapa lintho tse ling tse rekisoang ke mofani ea lumelletsoeng feela.
3) Kenyelletso ea Tiisetso:
- Warranty e felloa ke nako.
- Nomoro ea serial e sebelisoang fekthering e fetotsoe kapa e tlositsoe Sehlahisoang.
- Tšenyo, ho senyeha kapa ho se sebetse hantle ho bakoang ke:
Wear Ho senyeha ho tloaelehileng.
Ts'ebeliso ea lisebelisoa kapa likarolo tse sa fihlelleng litlatsetso tsa rona.
Ha ho setifikeiti kapa invoice joalo ka bopaki ba waranti.
Model Moetso oa sehlahisoa o bonts'itsoeng kareteng ea waranti ha e tsamaisane le ea sehlahisoa bakeng sa ho e lokisa kapa ho fetotsoe.
Tšenyo e bakoang ke matla a maholo.
✓ Ts'ebeletso ha e lumelloe ke morekisi.
Lisosa life kapa life tse sa amaneng le bothata ba sehlahisoa. - Litefiso tsa ho romella, ho kenya kapa litefiso tsa basebetsi bakeng sa ho kenya kapa ho hloma sehlahisoa.
4) Litokomane:
Ts'ebeletso ea Bareki e tla amohela lihlahisoa tse nang le bokooa sebakeng sa ts'ireletso ea tiisetso ha feela tlholo e hlalositsoe ka ho hlaka, le ha e amohela litokomane kapa kopi ea invoice, e bonts'ang letsatsi la theko, mofuta oa sehlahisoa, nomoro ea serial, le lebitso la distributor.
Maikutlo: Ka kopo, ikopanye le morekisi oa lehae bakeng sa thuso kapa litharollo tse ling.
Litokomane / Lisebelisoa
 |
VIVO LINK JPEG2000 AVoIP Encoder le Decoder [pdf] Bukana ea Mosebelisi VLVWIP2000-ENC, VLVWIP2000-DEC, JPEG2000 AVoIP Encoder le Decoder, JPEG2000, AVoIP Encoder le Decoder, Encoder le Decoder, le Decoder. |