SKYDANCE DL 4 Channels 0/1-10V DMX512 Decoder
Litaba
pata
Likaroloana
- Latela melaoana e tloaelehileng ea DMX512.
- Digital numueric dispaly, seta aterese ea ho qala ea DMX ka likonopo.
- Ts'ebetso ea RDM e ka khona ho fumana puisano lipakeng tsa master ea DMX le decoder. Bakeng sa mohlalaample, aterese ea DMX decoder e ka hlophisoa ke master console ea DMX.
- 1/2/4 tlhahiso ea mocha oa DMX e ka khethoang.
- 0-10V kapa 1-10V tlhahiso e ka khethoang.
- Logarithmic kapa linear dimming curve e ka khethoa.
- Mokhoa o ikemetseng oa RGB/RGBW le 4 channel dimmer mode e ka khethoang, e laoloang ke likonopo tse nang le mananeo a hahiloeng, ho e-na le letšoao la DMX.
- E fumaneha ka bosoeu kapa botsho.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 12-24VDC |
| Lets'oao la ho kenya | DMX512 |
| Letshwao la tlhahiso | 0/1-10V analoge |
| Sephetho sa hajoale | 4CH,20mA/CH |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho(LVD) | EN 62368-1:2020+A11:2020 |
| Setifikeiti | CE, EMC, LVD |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c: +65OC |
| Lintlha tsa IP | IP20 |
| Tiisetso le Tshireletso | |
| Tiisetso | 5 lilemo |
| Tshireletso | Khutlela Polarity |
| Boima ba 'mele | |
| Boima bo kahare | 0.102kg |
| Boima bo felletseng | 0.132kg |
Mechanical Structures le Installations
Setšoantšo sa Wiring
Hlokomela: Re khothaletsa palo ea bakhanni ba LED ba hokahaneng le tlhahiso e 'ngoe le e' ngoe ea 0/1-10V ha e fete likotoana tse 50, bolelele bo boholo ba lithapo ho tloha ho decoder ho ea ho mokhanni oa LED ha boa lokela ho feta limithara tse 50.
Tshebetso
Litlhophiso tsa parameter ea sistimi
- Tobetsa nako e telele M le ◀ konopo bakeng sa 2s, lokisetsa paramethara ea tsamaiso ea ho seta:
mokhoa oa decode, tlhahiso ea 0/1-10V, curve e khanyang e hlahisoang, boemo ba tlhahiso ea kamehla, skrine e se nang letho. tobetsa konopo ea M ho fetola ntho e itseng. - Mokhoa oa ho khetha: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola mokhoa oa ho khetha mocha o le mong(“d-1”), khetholo ea kanale e ’meli(“d-2”) kapa decode ea likanale tse nne(“d-4”). 1 decode decode, decoder e na le aterese e le 'ngoe feela ea DMX,' me kanane e mene e hlahisa khanya e tšoanang ea aterese ena ea DMX.
- 0/1-10V tlhahiso: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha 0-10V(“0-0”) kapa 1-10V(“1-0”).
- Mokokotlo o khanyang: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(“CL”) kapa logarithmic curve(“CE”).
- Boemo ba tlhahiso ea kamehla: tobetsa ◀ kapa ▶ konopo ho fetola boemo ba kamehla ba 0-100% ("d00" ho "dFF" ) ha ho se na letšoao la ho kenya la DMX.
- Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha ("bon") kapa tima ("boF") skrineng se se nang letho.
- Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.
Mokhoa oa DMX
- ● Tobetsa hakhutšoanyane M konopo, ha o hlahisa 001~512, kenya mokhoa oa DMX.
- Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea DMX decode(001~512), tobetsa nako e telele ho lokisa kapele.
- Haeba ho na le kenyo ya letshwao la DMX, e tla kena mokgweng wa DMX ka boyona.
- DMX Dimming: Decoder e 'ngoe le e' ngoe ea DL DMX e nka aterese ea 4 DMX ha e hokela khomphutha ea DMX.
Bakeng sa mohlalaample, aterese ea ho qala e sa fetoheng ke 1, kamano ea bona e tsamaellanang ka foromo:
Mokhoa oa DMX (001~512)
DMX Console Sephetho sa Decoder ea DMX CH1 0-255 CH1 0-10V CH2 0-255 CH2 0-10V CH3 0-255 CH3 0-10V CH4 0-255 CH4 0-10V
Mokhoa o ikemetseng oa RGB/RGBW
- Tobetsa hakhutšoanyane M konopo, ha o bonts'a P01~P24, kenya mokhoa o ikemetseng oa RGB/RGBW.
- Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01~P24).
- Mokhoa o mong le o mong o ka fetola lebelo le khanya. Tobetsa nako e telele senotlolo sa M bakeng sa 2s, lokisetsa lebelo la mokhoa oa ho seta, khanya, khanya ea kanale ea W.
Tobetsa M konopo ho fetola ntho tse tharo.
Mokhoa o ikemetseng oa RGB/RGBW (P01~P24)
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe. Lebelo la boemo:1-10 lebelo la lebelo(S-1, S-9, SF). Khanya ea mokhoa: Khanya ea boemo ba 1-10(b-1, b-9, bF). Khanya ea kanale ea W: khanya ea boemo ba 0-255 (400-4FF). Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Kenya mokhoa o ikemetseng oa RGB/RGBW ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Lebelo (8 level)
Khanya (boemo ba 10％)
Lenane la ho fetola mokhoa oa RGB
|
Che. |
Lebitso | Che. | Lebitso | Che. | Lebitso |
| P01 | Bofubelu bo tsitsitseng | P09 | 7 tlola ka mebala | P17 |
Bopherese bo boputsoa bo boreleli |
|
P02 |
Botala bo tsitsitseng | P10 | Bofubelu bo nyamela ka hare le ka ntle | P18 |
Botala bo bosoeu bo boreleli |
|
P03 |
Putsoa e tsitsitseng | P11 | Botala bo nyamela ka hare le ka ntle | P19 | RGB+W e bonolo |
| P04 | Bosehla bo tsitsitseng | P12 | Boputsoa bo fifala kahare le kantle | P20 |
RGBW e bonolo |
|
P05 |
Cyan e sa fetoheng | P13 | Bosoeu bo fela ka hare le ka ntle | P21 | RGBY e bonolo |
| P06 | Bopherese bo tsitsitseng | P14 | RGBW e nyamela kahare le kantle | P22 |
Bopherese bo bosehla ba cyan bo boreleli |
|
P07 |
Bosoeu bo tsitsitseng | P15 | Bosehla bo bofubelu bo boreleli | P23 |
RGB e bonolo |
|
P08 |
RGB e tlole | P16 | 'Cyan e tala e boreleli | P24 |
6 mmala o boreleli |
Boemo ba dimmer bo ikemetseng
- Tobetsa hakhutšoanyane M konopo, ha ho hlaha L-1~L-8, kenya dimmer e ikemetseng
- Tobetsa ◀ kapa ▶ konopo ho fetola nomoro ea "dimmer mode"(L-1~L-8).
- Mokhoa o mong le o mong oa dimmer o ka fetola khanya e 'ngoe le e' ngoe ea kanale Tobetsa nako e telele konopo ea M bakeng sa li-2, ho itokisetsa ho seta khanya ea kanale e mene.
Tobetsa hakhutšoanyane M konopo ho fetola kanale e mene(100~1FF, 200~2FF, 300~3FF, 400~4FF). Tobetsa ◀ kapa ▶ konopo ho seta boleng ba khanya ea kanale ka 'ngoe.
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Kenya mokhoa o ikemetseng oa dimmer ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Boemo ba dimmer e ikemetseng (L-1~L-8)
Khutlisa paramethara ea kamehla ea feme
- Tobetsa nako e telele ◀ le konopo ea ▶ bakeng sa 2s, khutlisetsa parameter ea kamehla ea feme, bonts'a "RES".
- Factory default parameter: DMX decode mode, DMX decode start address ke 1, four channel decode, 0-10V output, linear brightness curve, output 100% level ha ho na DMX input, RGB mode number ke 1, dimmer mode number ke 1, disable skrine e se nang letho e iketsang.
Setlhophiso sa curve e nyenyefatsang
Tlhahlobo e sa sebetseng le ho rarolla mathata
| Ho se sebetse hantle | Lisosa | Ho batle phoso |
| Ha ho khanya |
|
|
| Mmala o fosahetseng |
|
|
Litokomane / Lisebelisoa
 |
SKYDANCE DL 4 Channels 0/1-10V DMX512 Decoder [pdf] Bukana ea Mosebelisi DL 4 Channels 0 1-10V DMX512 Decoder, DL 4 Channel, 4 Channels Decoder, 0 1-10V DMX512 Decoder, DMX512 Decoder, DMX512, Decoder |
