Likanale tse 4 0/1-10V DMX512 Decoder
Nomoro ea mohlala: DL
RDM/Mosebetsi o ikemelang o le mong/Molaele kapa dimming ya logarithmic/pontsho ya dinomoro/Din Rail
Likaroloana
- Latela melaoana e tloaelehileng ea DMX512.
- Digital numueric dispaly, seta aterese ea ho qala ea DMX ka likonopo.
- Mosebetsi oa RDM o ka lemoha puisano lipakeng tsa
DMX master le decoder. Bakeng sa mohlalaample,
Aterese ea DMX decoder e ka hlophisoa ke master console ea DMX. - 1/2/4 tlhahiso ea mocha oa DMX e ka khethoang.
- 0-10V kapa 1-10V tlhahiso e ka khethoang.
- Logarithmic kapa linear dimming curve e ka khethoa.
- Mokhoa o ikemetseng oa RGB/RGBW le 4 channel dimmer mode e ka khethoang, e laoloang ke likonopo tse nang le mananeo a hahiloeng, ho e-na le letšoao la DMX.
- E fumaneha ka bosoeu kapa botsho.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 12-24VDC |
| Lets'oao la ho kenya | DMX512 |
| Letshwao la tlhahiso | 0/1-10V analoge |
| Sephetho sa hajoale | 4CH,20mA/CH |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho(LVD) | EN 62368-1:2020+A11:2020 |
| Setifikeiti | CE, EMC, LVD |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c: +65 OC |
| Lintlha tsa IP | IP20 |
| Tiisetso le Tshireletso | |
| Tiisetso | 5 lilemo |
| Tshireletso | Khutlela Polarity |
| Boima ba 'mele | |
| Boima bo felletseng | 0.102kg |
| Boima bo kahare | 0.132kg |
Mechanical Structures le Installations
Setšoantšo sa Wiring
Hlokomela: Re khothaletsa palo ea bakhanni ba LED ba hokahaneng ho 0/1-10V dimmer (mocha o mong le o mong) ha o fete likotoana tse 20, bolelele bo boholo ba lithapo ho tloha ho dimmer ho ea ho mokhanni oa LED ha boa lokela ho feta limithara tse 30.
Tshebetso
Litlhophiso tsa parameter ea sistimi
- Tobetsa nako e telele M le ◀ konopo bakeng sa 2s, lokisetsa parameter ea tsamaiso ea ho seta: mokhoa oa ho khetholla, tlhahiso ea 0/1-10V, lekhalo le khanyang, boemo ba tlhahiso ea kamehla, skrine e se nang letho. tobetsa M konopo ho switjha
- Mokhoa oa ho khetholla: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola mokhoa oa ho khetha mocha o le mong("d-1"), khetho ea litsela tse peli("d-2")
kapa decode ea li-channel tse 'nè ("d-4"). Ha e behoa e le mochine oa 1 oa mochine, mochine o nka aterese ea 1 ea DMX feela, 'me mecha e mene e hlahisa khanya e tšoanang ea aterese ena ea DMX. - 0/1-10V tlhahiso: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha 0-10V(“0-0”) kapa 1-10V(“1-0”).
- Mokokotlo o khanyang: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(“CL”) kapa logarithmic curve(“CE”).
- Boemo ba tlhahiso ea kamehla: tobetsa kapa senotlolo ho fetola boemo ba kamehla ba 0-100% ( d00 ho ea dFF ) ha ho se lets'oao la ho kenya DMX. ◀ ▶ ” ” “
- Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha ("bon") kapa tima ("boF") skrineng se se nang letho.
- Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.
Mokhoa oa DMX
- Tobetsa hakhutšoanyane M key, ha o bonts'a 001~512, kenya mokhoa oa DMX.
- Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea DMX decode(001~512) , tobetsa nako e telele ho lokisa kapele.
- Haeba ho na le kenyo ya letshwao la DMX, e tla kena mokgweng wa DMX ka boyona.
- DMX Dimming: Decoder e 'ngoe le e' ngoe ea DL DMX e nka aterese ea 4 DMX ha e hokela khomphutha ea DMX.
Bakeng sa mohlalaample, aterese ea ho qala e sa fetoheng ke 1, kamano ea bona e tsamaellanang ka foromo:
| DMX Console | Sephetho sa Decoder ea DMX |
| CH1 0-255 | CH1 0-10V |
| CH2 0-255 | CH2 0-10V |
| CH3 0-255 | CH3 0-10V |
| CH4 0-255 | CH4 0-10V |
Mokhoa o ikemetseng oa RGB/RGBW
- Tobetsa hakhutšoanyane M konopo ha o hlahisa P01~P24 kenya mokhoa o ikemetseng oa RGB/RGBW.
- Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01~P24).
- Mokhoa o mong le o mong o ka fetola lebelo le khanya.
Tobetsa nako e telele senotlolo sa M bakeng sa 2s lokisetsa lebelo la mokhoa oa ho seta, khanya, , khanya ea kanale ea W.
Tobetsa M konopo ho fetola ntho tse tharo.
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
Lebelo la boemo:1-10 lebelo la lebelo(S-1, S-9, SF).
Khanya ea mokhoa: Khanya ea boemo ba 1-10(b-1, b-9, bF).
Khanya ea kanale ea W: khanya ea boemo ba 0-255 (400-4FF).
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Kenya mokhoa o ikemetseng oa RGB/RGBW ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Lenane la ho fetola mokhoa oa RGB
| Che. | Lebitso | Che. | Lebitso | Che. | Lebitso |
| P01 | Bofubelu bo tsitsitseng | P09 | 7 tlola ka mebala | P17 | Bopherese bo boputsoa bo boreleli |
| P02 | Botala bo tsitsitseng | P10 | Bofubelu bo nyamela ka hare le ka ntle | P18 | Botala bo bosoeu bo boreleli |
| P03 | Putsoa e tsitsitseng | P11 | Botala bo nyamela ka hare le ka ntle | P19 | RGB+W e bonolo |
| P04 | Bosehla bo tsitsitseng | P12 | Boputsoa bo fifala kahare le kantle | P20 | RGBW e bonolo |
| P05 | Cyan e sa fetoheng | P13 | Bosoeu bo fela ka hare le ka ntle | P21 | RGBY e bonolo |
| P06 | Bopherese bo tsitsitseng | P14 | RGBW e nyamela kahare le kantle | P22 | Bopherese bo bosehla ba cyan bo boreleli |
| P07 | Bosoeu bo tsitsitseng | P15 | Bosehla bo bofubelu bo boreleli | P23 | RGB e bonolo |
| P08 | RGB e tlole | P16 | 'Cyan e tala e boreleli | P24 | 6 mmala o boreleli |
Boemo ba dimmer bo ikemetseng
- Tobetsa ka nako e khutšoanyane konopo ea M, ha u hlahisa L-1~L-8, kenya mokhoa oa dimmer o ikemetseng.
- Tobetsa ◀ kapa ▶ konopo ho fetola nomoro ea "dimmer mode"(L-1~L-8).
- Mokhoa o mong le o mong oa dimmer o ka fetola khanya e 'ngoe le e 'ngoe ka boikemelo.
Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa ho seta khanya ea kanale e mene.
Tobetsa hakhutšoanyane M konopo ho fetola kanale e mene(100~1FF, 200~2FF, 300~3FF, 400~4FF).
Tobetsa ◀ kapa ▶ konopo ho seta boleng ba khanya ea kanale ka 'ngoe.
Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta. - Kenya mokhoa o ikemetseng oa dimmer ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Khutlisa paramethara ea kamehla ea feme
- Tobetsa nako e telele ◀ le ▶ konopo bakeng sa 2s, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
- Factory default parameter: DMX decode mode, DMX decode start address ke 1, four channel decode, 0-10V output, linear brightness curve, output 100% level ha ho na DMX input, RGB mode number ke 1, dimmer mode number ke 1, disable skrine e se nang letho e iketsang.
Setlhophiso sa curve e nyenyefatsang
Tlhahlobo e sa sebetseng le ho rarolla mathata
| Ho se sebetse hantle | Lisosa | Ho batle phoso |
| Ha ho khanya | 1. Ha ho matla. 2. Khokahano e fosahetseng kapa e sa sireletsehang. |
1. Hlahloba matla. 2. Lekola khokahano. |
| Mmala o fosahetseng | 1. Khokahano e fosahetseng ea lithapo tsa tlhahiso ea 0-10V. 2. Phoso ea aterese ea DMX. |
1. Hokela hape lithapo tse hlahisoang ke 0-10V. 2. Beha aterese e nepahetseng ea decode. |
Litokomane / Lisebelisoa
 |
SuperLightingLED DL 4 Channels 0-1-10V DMX512 Decoder [pdf] Buka ea Taelo DL, 4 Channels 0-1-10V DMX512 Decoder, 0-1-10V DMX512 Decoder, 4 Channels DMX512 Decoder, DMX512 Decoder, Decoder |
