SKYDANCE DS DMX512-SPI Decoder le RF Controller
DMX512-SPI Decoder le RF Controller
Nomoro ea mohlala: DS
E lumellana le mefuta e 34 ea IC / Pontšo ea linomoro / Ts'ebetso ea ho ema u le mong / Taolo e se nang mohala / Seporo sa Din
Likaroloana
- DMX512 ho SPI decoder le RF controller e nang le ponts'o ea dijithale.
- E lumellana le mefuta e 34 ea li-strip tsa LED tsa IC RGB kapa RGBW, mofuta oa IC le odara ea R/G/B e ka hlophisoa.
- Li-IC tse tsamaellanang:
- TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909,
- UCS1912, UCS2903, UCS2909, UCS2912, WS2811, WS2812,
- TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B,
- SK6812, UCS8904B, LPD6803, LPD1101, D705, UCS6909,
- UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A,GS8206,GS8208.
- DMX decode mode, stand-alone mode le RF mode lia khethoa.
- Sebopeho se lumellanang le DMX512 se behile DMX ho khetholla aterese ea ho qala ka likonopo.
- Tlas'a mokhoa o ikemetseng, fetola mokhoa, lebelo kapa khanya ka likonopo.
- Tlas'a RF mode, bapisa le RF 2.4G RGB/RGBW remote control.
- Mefuta e 32 ea mekhoa e matla, ho kenyelletsa lebelo la lipere, ho lelekisa, ho phalla, tsela kapa mokhoa oa ho fetoha butle butle.
Tekheniki Parameters
Mechanical Structures le Installations
Setšoantšo sa Wiring
Hlokomela:
- Haeba mohala oa pixel oa SPI LED e le taolo ea terata e le 'ngoe, tlhahiso ea DATA le CLK e tšoana, re ka hokela ho fihla ho li-strips tse 2 tsa LED.
Tshebetso
Mofuta oa IC, odara ea RGB, le litlhophiso tsa bolelele ba pixel
- Pele u tlameha ho netefatsa hore mofuta oa IC, odara ea RGB le bolelele ba pixel ea lesela la LED li nepahetse.
- Tobetsa nako e telele M le ◀ linotlolo, ho itokisetsa mofuta oa IC oa ho seta, tatellano ea RGB, bolelele ba pixel, le skrine e se nang letho, Tobetsa konopo ea M ho chencha lintho tse 'ne.
- Tobetsa konopo ea ◀ kapa ▶ ho hlophisa boleng ba ntho ka 'ngoe.
- Tobetsa konopo ea M nako e telele bakeng sa 2s, kapa timeout 10s, 'me u khaotse ho seta.
Tafole ea mofuta oa IC:
- Taelo ea RGB: O-1 - O-6 e bontša litaelo tse tšeletseng (RGB, RBG, GRB, GBR, BRG, BGR).
- Bolelele ba pixel: Range ke 008-900.
- Skrine se se nang letho se iketselitseng: nolofalletsa ("bon") kapa tima ("boF") skrineng se se nang letho.
Mokhoa oa ho khetha DMX
- Tobetsa konopo ea M hakhutšoanyane ha u hlahisa 001-999, ebe u kenya mokhoa oa ho khetholla oa DMX.
- Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001-999), 'me u tobetse nako e telele ho lokisa kapele.
- Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa nomoro ea ho seta le lipikselse tse ngata. Tobetsa konopo ea M ho fetola lintho tse peli.
- Tobetsa konopo ea ◀ kapa ▶ ho hlophisa boleng ba ntho ka 'ngoe.
- Nomoro ea ho khetha (bontša "dno"): Nomoro ea mocha oa DMX, sebaka ke 003-600 (bakeng sa RGB).
- Lipikselse tse ngata (pontšo "Pno"): Bolelele bo bong le bo bong ba taolo ea kanale ea 3 DMX (bakeng sa RGB), sebaka ke bolelele ba 001- pixel. Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, tlohela ho seta.
- Haeba ho na le lets'oao la lets'oao la DMX, le tla kenya mokhoa oa ho khetholla DMX ka bohona. Bakeng sa mohlalaample, decoder ea DMX-SPI e hokahana le strip ea RGB:
- Lintlha tsa DMX ho tsoa ho khomphutha ea DMX512:
Mokhoa o ikemetseng
- Tobetsa konopo ea M nakoana, ha u hlahisa P01-P32, ebe u kenya mokhoa oa ho ikemela.
- Tobetsa konopo ea ◀ kapa ▶ ho fetola nomoro ea "dynamic mode" (P01-P32).
- Mokhoa o mong le o mong o ka fetola lebelo le khanya.
- Tobetsa konopo ea M nako e telele bakeng sa 2s, 'me u itokisetse lebelo la mokhoa oa ho seta le ho khanya. Tobetsa konopo ea M ho fetola lintho tse peli.
- Tobetsa konopo ea ◀ kapa ▶ ho hlophisa boleng ba ntho ka 'ngoe.
- Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF).
- Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF).
- Tobetsa konopo ea M nako e telele bakeng sa 2s, kapa timeout 10s, 'me u khaotse ho seta.
- Kenya mokhoa oa ho ema o le mong ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
Lenane la mekhoa e matla
Mokhoa oa RF
- Kopanya: Tobetsa nako e telele M le ▶ linotlolo bakeng sa 2s, hlahisa "RLS",
- nakong ea 5s, tobetsa konopo ea ho tima / ho tima ea RGB e hole, bonts'a "RLO", papali e atlehile,
- ebe sebelisa remoutu ea RF ho fetola nomoro ea mode, ho lokisa lebelo kapa khanya.
- Hlakola likonopo tsa nako e telele tsa M le ▶ bakeng sa 5s, ho fihlela ho hlaha "RLE", hlakola li-remoutu tsohle tsa RF tse tsamaellanang.
Khutlisa paramethara ea kamehla ea feme
- Tobetsa nako e telele le senotlolo, khutlisetsa parameter ea kamehla ea feme, 'me u bontše "RES".
- Factory default parameter: DMX decode mode, DMX decodes start address ke 1, decode number ke 510, multiple of pixels 1, dynamic mode number ke 1, mofuta oa chip ke TM1809, RGB order,
bolelele ba pixel ke 170, tima skrine e se nang letho ea othomathike, ntle le sebaka se hole sa RF.
Litokomane / Lisebelisoa
 |
SKYDANCE DS DMX512-SPI Decoder le RF Controller [pdf] Buka ea Mong'a DS DMX512-SPI, Decoder le RF Controller, DS DMX512-SPI Decoder le RF Controller, RF Controller, Controller |
