SENECA ZE-4DI Digital Output Modbus
LIEKETSENG MOKHOPO
TLHOKOMELO TS'ELE
- Lentsoe TEMOSO le eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse behang tšireletseho ea mosebedisi kotsing.
- Lentsoe ATTENTION e eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse ka senyang sesebelisoa kapa thepa e hokahaneng. Tiisetso e tla fetoha lefeela le lefeela ha ho ka etsahala hore e sebelisoe hampe kapa tampho sebelisa module kapa lisebelisoa tse fanoeng ke moetsi ha ho hlokahala bakeng sa ts'ebetso ea eona e nepahetseng, le haeba litaelo tse bukeng ena li sa lateloe.
TLHOKOMELO: Litaba tse felletseng tsa bukana ena li tlameha ho baloa pele ho ts'ebetso efe kapa efe. Mojule o tlameha ho sebelisoa feela ke litsebi tsa motlakase tse hloahloa. Litokomane tse khethehileng li fumaneha ka QR-CODE e bontšitsoeng leqepheng la 1. 
Mojule o tlameha ho lokisoa le likarolo tse senyehileng li nkeloe sebaka ke Moetsi. Sehlahisoa se na le maikutlo a ho tsoa ha electrostatic. Nka mehato e nepahetseng nakong ea ts'ebetso efe kapa efe. 
Ho lahloa ha litšila tsa motlakase le tsa elektroniki (ho sebetsa ho European Union le linaheng tse ling tse nang le recycle). Letšoao la sehlahisoa kapa sephutheloana sa sona le bonts'a sehlahisoa se tlameha ho neheloa setsing sa pokello se lumelletsoeng ho sebelisa litšila tsa motlakase le tsa elektroniki.
SEBELISA TS'OANELO-LIPHETO
Maemo a di-switches tsa DIP a hlalosa maemo a puisano a Modbus a mojule: Address and Baud Rate Tafole e latelang e bontsha boleng ba Baud Rate le Aterese ho ya ka disetting tsa DIP-switches:
| DIP-Switch boemo | ||||||||||||||||||||||
| SW1 POSITION | SEBELE BAUD | SW1 POSITION | AKHESE | SEEMO | TEMINATOR | |||||||||||||||||
| 1 2 3 4 5 6 7 8 | 3 4 5 6 7 8 | 10 | ||||||||||||||||||||
 |
9600 | #1 |  |
E holofetse | ||||||||||||||||||
 |
19200 | #2 |  |
E lumelletsoe | ||||||||||||||||||
 |
38400 |
|
#… | 
|
||||||||||||||||||
 |
57600 | #63 | ||||||||||||||||||||
 |
Ho tloha EEPROM |
 |
Ho tloha EEPROM |
|||||||||||||||||||
Hlokomela:
Ha DIP e fapoha 1 ho isa ho 8 e TIMA, li-setting tsa puisano li nkuoa ho tsoa lenaneong (EEPROM). ;
Tlhokomeliso 2:
Mohala oa RS485 o tlameha ho felisoa feela qetellong ea mohala oa puisano.
| TS'ELISO MATS'OANE | |||
| SW1 |
Li-switches tsohle tsa DIP li maemong a OFF. Ho fumana lintlha tse ling, sheba ho USER MANANUAL. |
||
|
SW2 |
Litlhophiso tsa RS232 kapa RS485 ho li-terminals 10-11-12 (COM2 serial port) |
||
| RS232 | ON |  |
|
| RS485 | TLOA |  |
|
TLHOKOMELISO TSA LITLHAKISO TSA MOSEBETSI
| Li-switches tsohle tsa DIP | TLOA |  |
|
| Mekhahlelo ea puisano ea protocol ea ModBUS: RS485 le RS482/232 likoung | 38400, 8, N, 1 Aterese 1 | ||
| Mekhahlelo ea puisano ea boema-kepe ba Micro USB | 115200, 8, N, 1 Aterese 1 | ||
| Kenyelletso ea Analogue 1-2 | TLHOKOMELOTAGE | ||
MELAO EA KHOPO EA ModBUS
- Kenya li-module ho terene ea DIN (120 max)
- Hokela li-module tse hole u sebelisa likhoele tsa bolelele bo loketseng. Tafole e latelang e bonts'a data ea bolelele ba cable:
- Bolelele ba libese: bolelele bo boholo ba marang-rang a Modbus ho latela Baud Rate. Bona ke bolelele ba likhoele tse hokahanyang li-module tse peli tse hole (sheba Setšoantšo sa 1).
- Bolelele ba ho tsoa: bolelele bo boholo ba ho tsoa ho 2 m (sheba setšoantšo sa 1).
Bakeng sa ts'ebetso e phahameng, ho khothalletsoa ho sebelisa likhoele tse khethehileng tse sirelelitsoeng, joalo ka BELDEN 9841.
| Bolelele ba bese | Derivation bolelele |
| 1200 m | 2 m |
LIEKETSENG MOLAOLI
Mojule o etselitsoe ho kengoa o otlolohileng seporong sa DIN 46277. Bakeng sa ts'ebetso e nepahetseng le bophelo bo bolelele, moea o lekaneng o tlameha ho fanoa. Qoba ho beha li-ducting kapa lintho tse ling tse sitisang libaka tsa moea. Qoba ho kenya li-module holim'a lisebelisoa tse hlahisang mocheso. Ho kgothaletswa ho kenya karolong e ka tlase ea phanele ea motlakase.
Ho kenya seporong sa DIN Joalokaha ho bontšitsoe setšoantšong:
- Kenya sehokelo se ka morao sa IDC10 sa mojule sekoting sa mahala sa seporo sa DIN (ho kenya ha ho na lentsoe hobane likhokahanyo li entsoe ka polarized).
- Ho tiisa mojule seporong sa DIN, tiisa lihakisi tse peli mahlakoreng a sehokelo sa morao sa IDC10.
Phepelo ea motlakase le sebopeho sa Modbus li fumaneha ho sebelisoa bese ea terene ea Seneca DIN, ka sehokelo sa morao sa IDC10, kapa sesebelisoa sa Z-PC-DINAL-17.5.
Port ea USB
Module e etselitsoe ho fapanyetsana data ho latela mekhoa e hlalositsoeng ke protocol ea MODBUS. E na le sehokelo se senyenyane sa USB mme se ka hlophisoa ho sebelisoa lits'ebetso le/kapa mananeo a software. Boema-kepe ba serial ba USB bo sebelisa liparamente tse latelang tsa puisano: 115200,8,N,1 Boema-kepe ba likhokahano ba USB bo arabela hantle joalo ka likou tsa RS485 kapa RS232 ntle le liparamente tsa puisano. EASY SETUP ke software eo u ka e sebelisang bakeng sa tlhophiso. Ho fumana lintlha tse ling etela tse latelang websebaka: www.seneca.it/products/ze-4di-2ai-2do – www.seneca.it/products/z-4di-2ai-2do – www.seneca.it/products/ze-2ai
- Sheba hore sesebelisoa seo ho buuoang ka sona se kenyelelitsoe lethathamong la lihlahisoa tse tšehetsoeng ke Easy Setup APP lebenkeleng. Sheba hore sesebelisoa seo ho buuoang ka sona se kenyelelitsoe lethathamong la lihlahisoa tse tšehetsoeng ke Easy Setup APP lebenkeleng.
LIKHOKELO MOTLATSI
Tlhokomeliso:
moeli oa phepelo ea motlakase o kaholimo ha oa tlameha ho fetisoa, kaha sena se ka baka tšenyo e kholo mojulung.
Ho fihlela litlhoko tsa ts'ireletso ea motlakase oa motlakase:
- sebelisa lithapo tsa lipontšo tse sirelelitsoeng;
- hokela thebe ho tsamaiso ea lefatše ea lisebelisoa tse khethehileng;
- arola likhoele tse sirelelitsoeng ho likhoele tse ling tse sebelisetsoang ho kenya motlakase (li-transformer, li-inverters, motors, lionto tsa induction, joalo-joalo ...).
PHEPELO EA MOTLAKASE
LIEKETSENG ANALOGU
|
Moqtage |
Sensor e sebetsang hona joale (lithapo tse 4) |
Passive sensor current (lithapo tse 2) |
Mojule o na le lisebelisoa tse peli tsa analogue tse ka hlophisoang ka software joalo ka voltage kapa hona joale. Bakeng sa software ea tlhophiso, sheba buka ea mosebelisi | ||||
|
|
 |
||||||
LINTLHA TSA DIGITAL (FEELA ZE-4DI-2AI-2DO le Z-4DI-2AI-2DO)
DITSHA TSA DIGITAL (FEELA ZE-4DI-2AI-2DO le Z4DI-2AI-2DO)
N.A.1=19 CO.1=20 N.C.1=21 |
N.A.2=22 CO.2=23 N.C.2=24 |
E na le liphetho tse peli tsa dijithale tse nang le mabitso a mahala. Lipalo tse peli li bonts'a mabitso a ka hare a relay a fumanehang. |
COM2 SEITLHOKO
 |
 |
Mojule o na le boema-kepe ba COM2 | |
| e ka lokisoang ka sesebelisoa sa SW2 | |||
| ho li-terminals 10 -11-12 |
THULA MODULE
Litekanyo tsa module e le 'ngoe LxHxD: 17.5 x 102.5 x 111 limilimithara;
Boima ba 'mele: 110g;
Kakaretso: PA6, e ntšo
Litekanyo tse peli tsa module LxHxD: 35 x 102.5 x 111 limilimithara;
Boima ba 'mele: 110g;
Kakaretso: PA6, e ntšo
MATŠOAO A LED KA PELE PELE (ZE-4DI-2AI-2DO)
|
LED |
BOEMO | BOLELA'NG |
| IP/ PWR (Tala) | ON |
Mojule o tsamaisoa le aterese ea IP e fumanoe |
|
IP/ PWR (Tala) |
Ho benya | Module o matla. E emetse aterese ea IP ho tsoa ho seva sa DHCP |
| Tx/ Rx (Khubelu) | Ho benya |
Phetiso le kamohelo ea data bonyane boema-kepe bo le bong ba Modbus: boema-kepe ba COM 1, boema-kepe ba COM 2 |
|
ETH TRF (Tala) |
Ho benya | Phetiso ea pakete ho boema-kepe ba Ethernet |
| ETH LNK (Tšehla) | ON |
Boema-kepe ba Ethernet bo hokahane |
|
DI1, DI2, DI3, DI4 (Khubelu) |
E felile / E felile | Boemo ba ho kenya dijithale 1, 2, 3, 4 |
| DO1, DO2 (Khubelu) | E felile / E felile |
Boemo ba tlhahiso 1, 2 |
|
FAIL (Khubelu) |
Ho benya |
Litholoana boemong ba ho hloleha |
MATŠOAO A LED KA PELELENG KA PELE (Z-4DI-2AI-2DO)
|
LED |
BOEMO | BOLELA'NG |
| PWR (Tala) | ON |
Mojule o tsamaisoa |
|
Tx/ RX (Khubelu) |
Ho benya | Phetiso le kamohelo ea data bonyane
boema-kepe bo le bong ba Modbus: boema-kepe ba COM 1, boema-kepe ba COM 2 |
| DI1, DI2, DI3, DI4 (Khubelu) |
E felile / E felile |
Boemo ba ho kenya dijithale 1, 2, 3, 4 |
|
DO1, DO2 (Khubelu) |
E felile / E felile | Boemo ba tlhahiso 1, 2 |
| FAIL (Khubelu) | Ho benya |
Litholoana boemong ba ho hloleha |
MATŠOAO A LED KA PANEL E KA PELE (ZE-2AI)
|
LED |
BOEMO | BOLELA'NG |
| IP/ PWR (Tala) | ON |
Mojule o tsamaisoa le aterese ea IP e fumanoe |
|
IP/ PWR (Tala) |
Ho benya | Module o matla. E emetse aterese ea IP ho tsoa ho seva sa DHCP |
| FAIL (Khubelu) | ON |
Bonyane e 'ngoe ea li-analogue tse peli tse kenyellelitsoeng ha e na sekala (bonyane-ka holimo-limo) |
|
ETH TRF (Tala) |
Ho benya | Phetiso ea pakete ho boema-kepe ba Ethernet |
| ETH LNK (Tšehla) | ON |
Boema-kepe ba Ethernet bo hokahane |
|
Tx1 (Khubelu) |
Ho benya | Phetiso ea pakete ea Modbus ho tloha sesebelisoa ho ea koung ea COM 1 |
| Rx1 (Khubelu) | Ho benya |
Phetiso ea pakete ea Modbus ho port COM 1 |
|
Tx2 (Khubelu) |
Ho benya | Phetiso ea pakete ea Modbus ho tloha sesebelisoa ho ea koung ea COM 2 |
| Rx2 (Khubelu) | Ho benya |
Phetiso ea pakete ea Modbus ho port COM 2 |
MOKHOA OA PUISANO
|
Tšehetso ea tekheniki |
support@seneca.it | Lintlha tsa sehlahisoa |
Litokomane / Lisebelisoa
 |
SENECA ZE-4DI Digital Output Modbus [pdf] Tlhophiso Tataiso ZE-4DI Digital Output Modbus, Digital Output Modbus, Output Modbus, 2AI-2DO, Z-4DI, 2AI-2DO, ZE-2AI |
