RYNOSKIN RSSS-JK0201 DS7 II Mehato ea Mahlakoreng ea Python
Torque le lisebelisoa
PELE KENYA
TLHOKOMELA LEKOSI. TIISETSA LIKAROLO TSOHLE LI LE TENG HO ITSELA KA LEthathamo la likarolo. BALA LITAELO KA HLOKO. HO KHOA HO HLOKAHALA. THUSO KHOTHATSO.
Lethathamo la Karolo
KA KOPO ELA HLOKO HORE LITŠOANTŠO TSE LATELANG LI THEITSWE HO SEBELISA LEHALA LA MOHARA
MOHATO 1
Qala ho kenya ka pele ho Mopalami / lehlakoreng le letona la koloi, Fumana libaka tse ka pele, tse bohareng le tse ka morao (setšoantšo sa 1).
MOHATO 2
Etsa qeto ea hore na koloi e na le phanele ea fatše e bulehileng kapa lesoba le nang le khoele phanele ea fatše
- Likoloi tse nang le sebaka se bulehileng sa ho kenya:
a. Kenya (1) 10mm Nut Plate ka har'a sebaka se seholo se bulehileng phanele ea fatše. Hlophisa linate tse kholehileng le lesoba le pakeng tsa likoti tse peli holim'a tšubuhlellano ea pinch, (setšoantšo sa 2).
b. Khetha Bracket ea Mopalami / ka ho le letona e ka pele. TLHOKOMELISO: Ho na le notch e nyane Botlaaseng ba Masakana a Setsi 'me notch ea Masaka a Ka morao e ka Holimo. Ka kopo, tsebahatsa Masakana a ka Pele, a Bohareng le a ka Morao ho latela Lethathamo la Karolo.
c. Hokela Bracket ho Letlapa la Nut ka (1) 10mm x 35mm Hex Bolt, (1) 10mm Lock Washer, le (1) 10mm x 34mm Flat Washer, (Fig 3). U se ke ua tiisa hardware.
- Likoloi tse nang le masoba a fektheri ka liphanele tsa fatše:
a. Khetha Bracket ea Mopalami / ka ho le letona e ka pele. Hokela Bracket sebakeng se ka pele sa ho hlomamisa (setšoantšo sa 4) ka (1) 8mm Hex Bolt, (1) 8mm Lock Washer, le (1) 8mm Washer ea Flat, (Fig 5). U se ke ua tiisa hardware.
MOHATO 4
Hokela Bracket ea Tšehetso ho Bracket e Tlamang ka (1) 10mm x 30mm Hex Bolt, (2) 10mm x 20mm Flat Washers, le (1) 10mm Nylon Lock Nut, (Fig 7). U se ke ua tiisa hardware.
MOHATO 5
Pheta Mehato ea 2 - 4 ho hokela Setsi sa Bapalami / Ka ho Le letona le Li-Brackets tse ka Morao le Li-Brackets tsa Tšehetso bohareng le libaka tse ka morao, (Fig 8- 9). TLHOKOMELISO: Ho na le notch e nyane Botlaaseng ba Masakana a Setsi 'me notch ea Masaka a Ka morao e ka Holimo. Ka kopo, tsebahatsa Li-Brackets tsa Setsi le Ka morao ho latela sena, (Setšoantšo sa 10). U se ke ua tiisa hardware.
MOHATO 6
Khetha Boto ea Bapalami / Ka ho le letona.
HLOKOMELA: Boto ea Bapalami / Ka ho le letona e tla ba le "P" ka pele. Hokela Boto ea Mabelo ho Masakaneng a Mountment ka (6) 8mm Combo Bolts, (Fig 11). BOHLOKOA: Se ke oa thellisa Running Board holim'a li-cradles tsa Bracket tse Mounting, kapa ho ka baka tšenyo qetellong. U se ke ua tiisa hardware.
MOHATO 7
Beha boemo 'me u fetole Boto ea Running' me u tiise lisebelisoa tsohle.
MOHATO 8
Pheta Mehato ea 1-7 ho hokela Boto ea Mokhanni / Le letšehali.
MOHATO 9
Etsa tlhahlobo ea nako le nako ea ho kenya lisebelisoa ho netefatsa hore lisebelisoa tsohle li sireletsehile ebile li tiile.
Tlhokomeliso
Ho sireletsa letsete la hau, u se ke ua sebelisa mofuta leha e le ofe oa polish kapa boka bo ka 'nang ba e-na le li-abrasives tse ka senyang qetello.
Sesepa se bonolo se ka boela sa sebelisoa ho hloekisa Maboto a Matho.
www.rynoskinauto.com.
Tšehetso ea Bareki: service@rynoskinauto.com
Litokomane / Lisebelisoa
 |
RYNOSKIN RSSS-JK0201 DS7 II Mehato ea Mahlakoreng ea Python [pdf] Tlhophiso Tataiso RSSS-JK0201 DS7 II Python Side Steps, RSSS-JK0201, DS7 II Mehato ea Mahlakoreng ea Python, Mehato ea Mahlakoreng ea Python, Mehato ea Mahlakoreng, Mehato |
