MW MEAN WELL 200W PWM Output Mokhanni oa Mosebedisi oa Mokhanni
Litaba
pata
Likaroloana
- Kamehla VoltagTlhahiso ea setaele sa e PWM e nang le maqhubu a fetohang a basebelisi ho fihla ho 4KHz e lumellanang leEEE1789-2015 le tlhoko ea EU Ecodesign SVM
- Boemo ba ho fokotseha ha Min 0.01%
- Matlo a polasetiki a nang le moralo oa sehlopha
- Ts'ebeliso ea motlakase e emeng <0.5W
- Tšehetsa KNX Data Secure
- Ha ho hlokahale KNX-DALl heke
- Nako e tloaelehileng ea bophelo> lihora tse 50000
- Waranti ea lilemo tse 5
Lisebelisoa
- Leseli la lebone la LED
- mabone a khanyang a LED
- Leseli le khabisitsoeng ka LED
- Leseli la mehaho ea LED
- Thaepa "HL" bakeng sa ts'ebeliso ea sehlopha sa l, karohano ea 2 e kotsi (e arotsoe)
- Lebone le khantšitsoeng
Tlhaloso
EA-200KN Series ke mokhanni oa LED oa 200W AC/DC o nang le voltage nang le tlhahiso ea setaele sa PWM, e khonang ho boloka mocheso oa 'mala le khanya ea homogeneity ha o khanna mefuta eohle ea likhoele tsa LED le vol.tage Mabone a LED.E hahelletsoeng KNX segokanyimmediamentsi sa sebolokigolo ke ho qoba ho sebelisa rarahaneng Knx-DALl heke le hlomelloa le KNX Lintlha li Sireletsehile. KNX Data Secure e fana ka ts'ireletso khahlano le ho qhekella moahong oa likoloi mme e ka hlophisoa morerong oa ETS.
EA-200KN sebetsa ho tloha 100 ~ 305VAC mme e fana ka mehlala e nang le tlhahiso ea voltage pakeng tsa 12V & 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 94%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa -40 ° C ~ + 85 ° C tlas'a convection ea mahala ea moea.
Boemo bo fokolang ba ho fifala ho isa ho 0.01% bo loketse lits'ebetso tse tlase tsa khanya, mohlala, cinema. Maqhubu a tlhahiso a fetoha ho fihlela tletlebo ea 4KHz LEEE1789-2015 ha ho na tlhokahalo ea kotsi le EU Iketsetse stroboscopic ponahalo ea tekanyo (SVM) ngongoreho ka lebaka la ho panya ha leseli. Tlhokahalo e fana ka tharollo e kholo bakeng sa ngongoreho ea bophelo bo botle ka lebaka la ho foka ha khanya.
Moetso oa khouto ea mohlala
|
Mofuta |
Mosebetsi | Hlokomela |
| KN | Theknoloji ea taolo ea KNX |
Le stock |
LIEKETSENG TS'OANELO
|
MOHLALA |
EA-200-PW | EA-200-PW | EA-200-PW |
EA-200-PW |
|
| SEHLOOHO | DC VOLTAGE |
12V |
24V | 36V |
48V |
| RETŠELISITSOE NKHOANE |
15A |
8.3A |
5.55A |
4.17A |
|
| REKETSO MATLA |
180W |
199.2W |
199.8W |
200.1W |
|
| LIEKETSENG DIMM | 0 ~ 100% | ||||
| MAIKETLO A PWM (Mofuta.) | Mosebelisi oa 200 ~ 4000Hz a fetoha ka ETS | ||||
| SETUP, TSOSA NAKO Hlokomela. 2 | 500ms, 80ms / 230VAC, 1200ms, 80ms / 115VAC | ||||
| NAKO EA HO PHETHA (Mofuta.) | 10ms / 230VAC kapa 115VAC | ||||
| KEKETSO | TLHOKOMELOTAGE RETS'ELA Hlokomela.3 | 100 ~ 305VAC 142 ~ 431VDC (Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC") |
|||
| MOEKETSENG MAKOANE | 47 ~ 63Hz | ||||
| SEBETSO SA MATLA (Typ.) | PF> 0.97 / 115VAC, PF> 0.96 / 230VAC, PF> 0.94 / 277VAC @ mojaro o felletseng (Ka kopo, sheba karolo ea "POWER FACTOR (PF) CHARACTERISTIC") |
||||
| PHETHAHETSO EA HARMONIC | THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Ka kopo sheba karolong ea "TOTAL HARMONIC DISTORTION") |
||||
| KATLEHO (Mofuta.) |
92% |
93% | 94% |
94% |
|
| AC CURRENT (Mofuta.) | 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC | ||||
| INRUSH CURRENT (Mofuta.) | COLD START 65A (mashome a mabeli = 550μs e lekantsoe ho 50% Ipeak) ho 230VAC; Ka NEMA 410 | ||||
| MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER | Li-unit tse 3 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 5 (sekheo sa potoloho sa mofuta oa C) ho 230VAC | ||||
| LEAKAGE NKHOANE | <0.75mA / 277VAC | ||||
| EMA HAUFI TEBELLO MATLA | ts'ebeliso ea motlakase e emeng <0.5W ha e fifala | ||||
| TS'IRELETSO | KHAHLISA | 108 ~ 135% e lekantsoe matla a tlhahiso | |||
| Mokhoa oa Hiccup kapa moeli oa hajoale oa morao-rao, oa fola hanghang kamora hore boemo ba phoso bo tlosoe | |||||
| POTOLOHO E KHUTSOANE | Koala o/p voltage, matlafatsa hape ho fola | ||||
| KHAHLISO SEFOLITAGE | 13 ~ 18V | 27 ~ 34V | 41 ~ 49V | 53 ~ 65V | |
| Koala o/p voltage, kenya hape matla a ho hlaphoheloa ka mor'a hore boemo ba phoso bo tlosoe | |||||
| PHEKO MOCHESO | Koala o/p voltage, kenya hape matla a ho hlaphoheloa ka mor'a hore boemo ba phoso bo tlosoe | ||||
| TIKOLOHO | MOSEBETSI TEMPELA. | Tcase=-40 ~ +85℃ (Ka kopo, sheba karolo ea “ OUTPUT LOAD vs TEMPERATURE”) | |||
| MAX. TLHALOSO TEMPE. | Mokotlana = + 85 ℃ | ||||
| MOSEBETSI MOKOBELO | 20 ~ 95% RH e sa lumellaneng | ||||
| POLOKO TEMP., MONATE | -40 ~ + 80 ℃, 10 ~ 95% RH | ||||
| MOEKETSI. TIISETSO MOKHOA | ± 0.03% / ℃ (0 ~ 50 ℃) | ||||
| TSIETSO | 10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z | ||||
| TŠIRELETSO & EMC | TS'IRELETSO MAEMO Hlokomela. 5 | UL8750 (mofuta "HL"), CSA C22.2 No. 250.13-12; ENEC BS EN / EN61347-1, BS EN / EN61347-2-13, BS EN / EN62384 e ikemetse, EAC TP TC 004, GB19510.1, GB19510.14 e amohetse; Moralo o bua ka BS EN / EN60335-1, Ho latela BS EN / EN61347-2-13 sehlomathiso sa J se loketseng lits'ebetso tsa maemo a tšohanyetso. | |||
| MAEMO KHOTSO | Protocol e netefalitsoeng | ||||
| EMELANG KOLOKOTAGE | I/PO/P: 3.75KVAC | ||||
| HO IKAOA KHANYETSO | I / PO / P: 100M Ohms / 500VDC / 25 ℃ / 70% RH | ||||
| EMC TS'ISITSO Hlokomela. 6 | Ho latela BS EN / EN55015, BS EN / EN61000-3-2 Sehlopha sa C (@ mojaro ≧ 60%); BS EN / EN61000-3-3, GB17743 le GB17625.1, EAC TP TC 020 | ||||
| TSIETSI EMC | Ho ikamahanya le BS EN / EN61000-4-2,3,4,5,6,8,11; BS EN / EN61547, boemo ba indasteri e bobebe (ho itšireletsa mafung, Line-Line 2KV), EAC TP TC 020 | ||||
| BA BANG | MTBF | Lihora tse 553.6 K mets. Telcordia SR-332 (Bellcore); Lihora tse 170 K. EA-217-MIL | |||
| TŠEBELETSO | 195*68*39.5mm (L*W*H) | ||||
| PAKA | 1.03Kg; 12pcs / 13.4Kg / 0.71CUFT | ||||
| HLOKOMELA |
|
||||
MOSEBETSI OA DIMMING
Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM
- Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.
Sebopeho sa KNX
- Sebelisa letšoao la KNX lipakeng tsa KNX + le KNX-.
Lenaneo la kopo (database) le ka kopitsoa ka li-Catalogs tsa Inthanete ho tloha ETS kapa ka http://www.meanwell.com/productCatalog.aspx
|
Likhetho tsa parametrization |
Tlhaloso |
| Fetolela mesebetsi |
|
| Ho fifala |
|
| Boleng ba khanya |
|
| Mekhahlelo e meng e ka fumanoa ho database ea ts'ebeliso ea ETS le buka ea litaelo | |
| Sesebelisoa se na le KNX Data Secure. K'homphieutha ea KNX e fana ka tšireletso khahlano le ho qhekella moahong o ikemetseng mme e ka hlophisoa morerong oa ETS. Ho hlokahala tsebo e qaqileng ea litsebi. Setifikeiti sa sesebelisoa, se khomaretsoeng sesebelisoa, sea hlokahala bakeng sa phetolo ea pele. Kamora ho hlophisoa le ho itokisetsa ts'ebetso ea nako ea ho matha (ea letsatsi le letsatsi), ho kgothaletswa ho tlosa setifikeiti ho sesebelisoa le ho se boloka ka polokeho. Bakeng sa lintlha, ka kopo sheba bukana ea litaelo.
BOLELA'NG KHABANE Setifikeiti sa Sesebelisoa |
|
LITLHAKISO TSA HO HLAHALA MORALO
TEMPERATURE EA TSOHLE, Ta (ºC)
Mokotlana (ºC)
TŠOANELO STATIC
KEKETSO MOLAPOTAGE (V) 60Hz
MOKHOA OA MATLA PF CHARACTERISTIC
MOJALO
PUSELETSO EA TSOHLE EA HARMONIC (THD)
Mohlala oa 48V, Tcase ho 75 ℃
Laela
KATLEHO MORAPO
Letoto la PWM KN -200 le na le bokhoni bo phahameng ba ho sebetsa bo ka bang 94%
fihlella likopong tsa tšimo.
Moetso oa 48V, Tcase ho 75 ℃
Laela
BOPHELONG
Setšoantšo se Thibeloang
Tlhaloso ea Mechini
Khothaletsa Tataiso ea ho Nyoloha
Bukana ea ho kenya
Khokahano ea mofuta oa KN
Litemoso
- Pele o qala ts'ebetso efe kapa efe ea ho kenya kapa ho lokisa, ka kopo khaola phepelo ea motlakase ho Netefatsa hore e ke ke ea hokeloa hape ntle le morero!
- Boloka moea o lekaneng o kenang kahare ho yuniti mme o se ke oa paka ntho efe kapa efe ho eona Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
- Lits'oants'o tsa ho hloaea ntle le tloaelo e tloaelehileng kapa ho sebetsa tlasa mocheso o phahameng ho ka eketsa mocheso oa karolo ea kahare mme ho tla hloka phokotso ea tlhahiso
- Tekanyo ea hajoale ea thapo ea mantlha / ea bobeli e lumelletsoeng e lokela ho ba kholo ho feta kapa ho lekana le ea Ka kopo sheba tlhaiso-leseling ea eona.
- Bakeng sa bakhanni ba LED ba nang le likhokelo tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile hore metsi a se ke a kenella ka har'a
- TC e tsejoa lenaneng la sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea TC ha o na ho feta moeli.
- U SE KE UA hokela "KNX- ho -V".
- Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le ea hoqetela Ho tloha ha ts'ebetso ea EMC e tla angoa ke ho hlongoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho ts'oaneleha hape Tataiso ea EMC mabapi le ho kenya ka botlalo hape.
- Bakeng sa tlhaiso-leseling e batsi ka ho kenya, ka kopo sheba ho: http://www.meanwell.com/manual.html bakeng sa lintlha.
Litokomane / Lisebelisoa
 |
MW E BOLELA HAHLE 200W PWM Output Driver [pdf] Bukana ea Mosebelisi Mokhanni oa Phatlalatso ea 200W PWM, PWM-200KN |
