MW MEAN WELL 200W PWM Akwụkwọ ntuziaka onye ọkwọ ụgbọ ala

PWM-200KN usoro bụ onye ọkwọ ụgbọ ala 200W AC / DC na-egosipụta voltaji na-adịgide adịgidetage mode na mmepụta ụdị PWM, nke na-enwe ike ịnọgide na-enwe okpomọkụ nke agba na ịdị ncha nchapụta mgbe ị na-anya ụdị ụdị LED ọ bụla na volta.tage LED bulbs.The wuru na- KNX interface bụ iji zere iji mgbagwoju anya KNX-DAll ọnụ ụzọ ámá na kwadebere ya KNX Nchekwa data. KNX Data Secure na-enye nchebe megide ntughari n'ịrụ ọrụ akpaaka ma nwee ike ịhazi ya na ọrụ ETS.
PWM-200KN na-arụ ọrụ site na 100-305VAC ma na-enye ụdị na mmepụta voltage n'etiti 12V & 48V. Ekele maka arụmọrụ dị elu ruo 94%, site na imepụta enweghị fan, usoro ahụ dum nwere ike ịrụ ọrụ maka -40 ° C ~ + 85 Celsius C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu.
Opekempe mbelata dị ala ruo 0.01% dabara adaba maka ngwa ọkwa ọkụ dị ala dịka sinima. Ugboro mmepụta bụ mgbanwe ruo mkpesa 4KHz lEE1789-2015 enweghị ihe ize ndụ chọrọ na EU Ederede stroboscopic Ntụle visibiliti (SVM) nchegbu n'ihi ìhè fickering. chọrọ inye ezigbo ngwọta maka nchegbu ahụike n'ihi ọkụ ọkụ.

Ihe ntinye ihe nlere

Ụdị	Ọrụ	Rịba ama
KN	Teknụzụ njikwa KNX	Na ngwaahịa

Nkọwapụta

Ụdị		PWM-200-12	PWM-200-24	PWM-200-36	PWM-200-48
Mpụta	DC VOLTAGE	12V	24V	36V	48V
	EKWERE UGBUA	15A	8.3A	5.55A	4.17A
	EGO IKE	180W	199.2W	199.8W	200.1W
	ỤTỌ DIMMING	0 ~ 100%
	Ugboro ugboro PWM (Ụdị)	200 ~ 4000Hz onye ọrụ nwere ike ịgbanwe site na ETS
	NTKWU, NA-ebili oge Rịba ama. 2	500ms, 80ms/230VAC, 1200ms, 80ms/115VAC
	Jidesie oge (Ụdị)	10ms / 230VAC ma ọ bụ 115VAC
Ntinye	VOLTAGE nso Rịba ama.3	100 ~ 305VAC 142 ~ 431VDC (Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC”)
	Ugboro ugboro	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba “PAWER FACTOR (PF) CharacTERISTIC”
	Mkpokọta ndakpọ ndakpọ	THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Biko rụtụ aka na ngalaba “TOTAL HARMIC DISTORTION”)
	OKWU (Ụdị)	92%	93%	94%	94%
	AC ugbu a (Ụdị)	2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
	INRUSH Ugbu a (pdị.)	Oyi malitere 65A(twidth=550μs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
	MAX. Mba. nke PSU na 16A CIRCUIT BREAKER	Nkeji 3 (onye na-emebi okirikiri nke ụdị B) / nkeji 5 (onye na-emebi okirikiri nke ụdị C) na 230VAC
	NKWUKWU UGBUA	<0.75mA / 277VAC
	KWỤRỤ N'ỤSỌ Iriri ike	oriri ike njikere <0.5W mgbe ọ na-ebelata
Nchedo	bufee	108 ~ 135% gosiri ike mmepụta
		Ọnọdụ mgbochi ma ọ bụ mmachi na -adị ugbu a, na -agbake na akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ
	Obere oge	Mechie o/p voltage, re-ike na-agbake
	N'elu VOLTAGE	13 ~ 18V	27 ~ 34V	41 ~ 49V	53 ~ 65V
		Mechie o/p voltage, weghachite ike iji gbakee mgbe ewepụrụ ọnọdụ mmejọ
	GARA Okpomọkụ	Mechie o/p voltage, weghachite ike iji gbakee mgbe ewepụrụ ọnọdụ mmejọ
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	Tcase = -40 ~ +85 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE")
	MAX. IGBU OZI.	Akpa =+85 ℃
	Iru mmiri na-arụ ọrụ	20 ~ 95% RH na-abụghị condensing
	Okpomọkụ nchekwa, iru mmiri	-40 ~ +80 ℃, 10 ~ 95% RH
	TEMP. EGO	0.03%/℃ (0 ~ 50 ℃)
	VIBRATION	10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC	Ọkọlọtọ nchekwa Rịba ama. 5	UL8750 (ụdị "HL"), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384 nọọrọ onwe ya, EAC TP TC 004,GB19510.1,GB19510.14 kwadoro; Nhazi na-ezo aka na BS EN/EN60335-1, Dị ka BS EN/EN61347-2-13 appendix J dabara maka nrụnye mberede.
	Ụkpụrụ KNX	Protocol enwetara ikike
	NA -ECHE VOLTAGE	I/PO/P: 3.75KVAC
	Nguzogide dịpụrụ adịpụ	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISỌ Rịba ama. 6	Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB17743 na GB17625.1,EAC TP TC 020
	EMC MGBE	nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (ọgwụ mgbochi, Line-Line 2KV), EAC TP TC 020
Ndị ọzọ	MTBF	553.6 K elekere min. Telcordia SR-332 (Bellcore); 170K elekere min. MIL-HDBK-217F (25 ℃)
	Akụkụ	1956839.5mm (LWH)
	Mbukota	1.03Kg; 12pcs / 13.4Kg / 0.71CUFT
IHE	A na-atụle parampat niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a yana 25 ℃ nke ọnọdụ okpomọkụ. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “STATlC CHARACTERlSTlC” maka nkọwa. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75 ℃ ma ọ bụ obere. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com The ambient okpomọkụ derating nke 3.5 ℃ / 1000m na fanless ụdị na nke 5℃ / 1000m na fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft). Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ mgbochi mmiri, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu i jiri ya. LED_EN [PDF] A naghị atụ aro ka ị jikọọ na ibu capacitive Nkwuputa Ibu ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING ọrụ

Ụkpụrụ nbelata maka mmepụta ụdị PWM

A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

KNX interface

Tinye akara ngosi KNX n'etiti KNX+ na KNX-.
Enwere ike ibudata mmemme ngwa (nchekwa data) site na katalọgụ n'ịntanetị site na ETS ma ọ bụ site na http://www.meanwell.com/productCatalog.aspx

Nhọrọ parametrization	Nkọwa
Gbanwee ọrụ	Gbanwuo nchapụta Ọsọ na-ebelata maka ngbanwu/ gbanyụọ Gbanwee telegram na ọkwa Gbanyụọ/ gbanyụọ igbu oge
Na-ebelata	Ọsọ na-ebelata maka 0 ~ 100% Kwe ka ịgbanwuo site na ntugharị ikwu
Uru ihie	Ọsọ na-ebelata maka ụkpụrụ nchapụta mgbanwe Nye ohere ịgbanwu ma gbanyụọ nchapụta site na uru Uru na-egbuke egbuke na ọkwa
Enwere ike ịchọta paramita ndị ọzọ na nchekwa data ngwa ETS na ntuziaka ntuziaka
Ejiri ngwaọrụ a nwere KNX Data Secure. KNX Data Secure na-enye nchebe megide aghụghọ n'ime akpaaka ụlọ na enwere ike ịhazi ya na ọrụ ETS. Achọrọ ihe ọmụma ọkachamara zuru ezu. Asambodo ngwaọrụ, nke etinyere na ngwaọrụ ahụ, achọrọ maka nhazi mbụ. Mgbe nhazi na njikere maka oge ojiri gaa (kwa ụbọchị), a na-atụ aro ka iwepu asambodo na ngwaọrụ ma chekwaa ya na nchekwa. Maka nkọwa, biko rụtụ aka na ntuziaka ntuziaka. ỤMỤ ỌMA Asambodo ngwaọrụ

Mpụta ibu okpomọkụ

Okpomọkụ dị gburugburu, Ta (ºC)

Tcase (ºC)

AKWỤKWỌ AKWỤKWỌ

Ntinye VOLTAGE (V) 60Hz

IKE IHE PF Characteristic

Ibu

Mkpokọta mgbasa ozi ọjọọ (THD)

48V Model, Tcase na 75 ℃

Ibu ibu

Ibu arụmọrụ

Usoro PWM KN -200 nwere arụmọrụ ọrụ dị elu nke ruru 94% nwere ike
a ga-enweta na ngwa ubi.
※ 48V Model, Tcase na 75 ℃

Ibu ibu

OGE NDỤ

Ihe Ngosi

Nkọwapụta igwe

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị KN

Ịdọ aka ná ntị

Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ike na-esi na ya hụ na enweghị ike ijikọ ya n'amaghị ama!
Debe ventilashị kwesịrị ekwesị na gburugburu unit ahụ ma ghara ịkwakọba ihe ọ bụla na 10-15 cm ga-edeberịrị mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ime ka okpomọkụ dị n'ime ya dịkwuo elu, ọ ga-achọkwa ntọhapụ na mmepụta.
Ogo nke eriri isi/secondary akwadoro ugbu a kwesịrị ịdị karịa ma ọ bụ ha nhata nke Biko rụtụ aka na nkọwapụta ya.
Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit ahụ na ihe ọkụ ọkụ siri ike ka mmiri ghara ịbanye n'ime ụlọ.
Achọpụtara Tc na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.
Ejikọla "KNX- na -V".
A na-ahụta ọkụ eletrik dị ka akụkụ nke a ga-arụ ọrụ yana njikọta na nke ikpeazụ Ebe ọ bụ na arụ ọrụ EMC ga-emetụta nrụnye zuru oke, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emezigharị ntụziaka EMC na nrụnye zuru ezu ọzọ.

Maka ozi ndị ọzọ gbasara nwụnye, biko rụtụ aka: http://www.meanwell.com/manual.html maka nkọwa.

Akwụkwọ / akụrụngwa

MW MEAN WELL 200W PWM Ọkwọ ụgbọ ala [pdf] Akwụkwọ ntuziaka onye ọrụ
200W PWM Ọkwọ ụgbọ ala, PWM-200KN

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Atụmatụ

Ngwa

Nkọwa