Manuals+

Quick Start Guide: HOBO® MX1104 & MX1105 Data Loggers

This guide provides essential steps to get started with your HOBO Analog/Temp/RH/Light (MX1104) and 4-Channel Analog (MX1105) data loggers.

Getting Started with HOBOconnect

  1. Download HOBOconnect: Obtain the HOBOconnect app from the App Store® or Google Play™ for your phone or tablet. For Windows® computers, download it from www.onsetcomp.com/products/software/hoboconnect.

  2. Open the App: Launch the HOBOconnect app. Enable Bluetooth® in your device settings if prompted.

  3. Install External Sensors: Connect any external self-describing sensors. To do this, insert the sensor plug into an available analog sensor port on the logger. Turn the plug one-quarter clockwise. Ensure the flat part of the plug faces upwards for proper installation. This applies to all external analog sensors.

  4. Wake the Logger: Press either button on the logger to activate it.

  5. Connect to the Logger: In the HOBOconnect app, tap 'Devices'. Then, tap the logger's tile to connect. If you have multiple loggers, pressing the top button on the logger may bring it to the top of the list. If the logger is not found, ensure it is within Bluetooth range of your device.

  6. Configure and Start Logging:

    • Once connected, tap 'Configure & Start' to set up the logger.
    • Select your desired logger settings, including configurations for any external analog sensors. Ensure all channels you intend to log are enabled.
    • Tap 'Start' to save the settings to the logger. The logger will begin recording data based on your selected configuration. If you configured the logger to start with a button push, press the start button on the logger.

Deployment and Data Download

  1. Deploy the Logger: Place the logger in your desired monitoring location. Insert one of the included plugs into any empty ports. For detailed deployment guidelines, refer to the full product manual available at www.onsetcomp.com/resources/documentation/23968-mx1104-and-mx1105-manual.

  2. Download Data: In the HOBOconnect app, tap 'Devices', connect to your logger, and then tap 'Download Data'. After the download completes, you can choose to export and share the data file, or view your files by tapping 'Data' at the bottom of the screen.

For comprehensive specifications and information about your logger, scan the QR code (if applicable) or visit www.onsetcomp.com/support/manuals/23968-mx1104-and-mx1105-manual.

Logger Button Functions

Quick ReferencePress for 1 second to:Press and hold for 3 seconds to:Press and hold for 10 seconds to:
Top button
  • Cycle through each channel to view the latest sensor readings.
  • Wake up the logger.
  • Bring the logger to the top of the list in the app.
  • Silence a beeping alarm.
  • Turn on the LCD.
Start, stop, or resume logging (depending on settings chosen in the app).N/A
Bottom button
  • Cycle through any statistics and alarm readings for the channel currently displayed (if applicable).
  • Wake up the logger.
  • Silence a beeping alarm.
  • Turn on the LCD.
Clear an alarm for the channel currently displayed (depending on the settings chosen in the app).N/A
Both buttonsN/AN/AReset a password
Models: MX1104, MX1105, MX1104 Multi Channel Data Loggers, Multi Channel Data Loggers, Data Loggers

File Info : application/pdf, 2 Pages, 905.86KB

PDF preview unavailable. Download the PDF instead.

23967-G MAN-MX1104-MX1105-QSG

References

Acrobat Distiller 22.0 (Windows)

Related Documents

Preview HOBO MX1104 & MX1105 Data Logger Quick Start Guide
Concise guide to setting up, deploying, and offloading data from HOBO Analog/Temp/RH/Light (MX1104) and 4-Channel Analog (MX1105) data loggers using the HOBOconnect app.
Preview HOBO MX2300 Series Data Logger Manual: Temperature & RH Monitoring
Comprehensive manual for the HOBO MX2300 Series Bluetooth Low Energy (BLE) data loggers by Onset. Covers setup, specifications, operation, and data analysis for temperature and relative humidity monitoring.
Preview HOBO MX2300 Series Data Logger Quick Start Guide | Onset Computer Corporation
Quick Start Guide for the HOBO MX2300 Series Data Loggers by Onset Computer Corporation. Learn how to download the HOBOconnect app, connect your logger, configure settings, start logging, and offload data. Includes important safety warnings and contact information.
Preview HOBO MX2205 TidbiT Ext Temp Logger Manual - Temperature Monitoring Guide
Comprehensive user manual for the HOBO MX2205 TidbiT Ext Temp Logger, detailing specifications, setup, configuration, data logging, and maintenance for environmental temperature monitoring.
Preview HOBO MX801 Submersible Logger Quick Start Guide
A quick start guide for the HOBO MX801 Submersible Logger, detailing setup, configuration, deployment, data download, and processing for water parameter logging using HOBOconnect.
Preview HOBO U12 4-External Channel Outdoor/Industrial Logger Manual
This manual provides comprehensive instructions for the HOBO U12 4-External Channel Outdoor/Industrial Data Logger (U12-008), covering its features, specifications, setup, operation, and maintenance.
Preview HOBO Pro v2 Logger (U23-00x) Quick Start Guide
This guide provides essential steps for setting up and deploying the HOBO Pro v2 Logger (U23-00x) series. It covers software installation, connecting the logger via base station or shuttle, deployment best practices including solar radiation shielding and cable management, and data readout procedures. Learn how to ensure accurate environmental data collection with your HOBO logger.
Preview HOBO MX1101 Temp/RH Data Logger Manual
This manual provides comprehensive instructions for the HOBO MX1101 Temp/RH Data Logger, covering its features, specifications, operation, configuration, and maintenance. The logger records temperature and relative humidity using integrated sensors and transmits data wirelessly via Bluetooth Low Energy (BLE). It is designed for indoor environments and can be used with the HOBOconnect app for data management and analysis.