Quick Start for the HOBO® MX2300 Series Data Loggers

Getting Started

1. Download HOBOconnect® to a phone or tablet from the App Store® or Google Play™.

   Download HOBOconnect to a Windows® computer from www.onsetcomp.com/products/software/hoboconnect.

2. Press the button on the logger to wake it up. Open the app. Enable Bluetooth® in your device settings if prompted.

3. Tap Devices in the app. Tap the logger in the app to connect to it. (Press the button on the logger again to bring it to the top of the list if you are working with multiple loggers.) If the logger does not appear, make sure it is within range of your phone, tablet, or computer.

4. Tap ✏️ to set up the logger. Choose your logger settings and then tap ? to save the settings to the logger.

5. The logger will begin logging data based on the settings you selected in the app. Press the button on the logger if you set it up to start logging with a button push. Deploy the logger to the location where you will be monitoring the conditions.

6. To offload data from the logger to your device, tap Devices and press the button on the logger to wake it up (if necessary). Connect to the logger and tap ?. To view or export the data, tap HOBO Files, tap ⋮ (if applicable), and tap .

Additional Information

For detailed specifications and information about the logger, scan the QR code or go to www.onsetcomp.com/support/manuals/20923-mx2300-manual.