Lumens
Molaoli oa Keyboard
Bukana ea Mosebelisi

Mohlala: VS-KB30

Bohlokoa

Ho jarolla mofuta oa morao-rao oa Quick Start Guide, bukana ea basebelisi ba lipuo tse ngata, software, kapa mokhanni, jj. Ka kopo etela Lumens
http://www.MyLumens.com

Litaba tsa Copyright

Litokelo tsa molao © Lumens Digital Optics Inc. Litokelo tsohle li sirelelitsoe.
Lumens ke lets'oao la khoebo leo hajoale le ngolisoang ke Lumens Digital Optics Inc.

Ho kopitsa, ho hlahisa kapa ho fetisa sena file ha e lumelloe haeba laesense e sa fanoe ke Lumens Digital Optics Inc. ntle le haeba o kopitsa sena file ke molemong oa ho boloka bekapo ka mor'a ho reka sehlahisoa sena.

Bakeng sa ho tsoela pele ho ntlafatsa sehlahisoa, Lumens Digital Optics Inc. e boloka tokelo ea ho etsa liphetoho ho litlatsetso tsa sehlahisoa ntle le tsebiso pele.
Boitsebiso bo ho sena file e ka fetoha ntle le tsebiso esale pele.
Ho hlalosa kapa ho hlalosa ka botlalo hore na sehlahiswa sena se lokela ho sebediswa jwang, bukana ena e ka bua ka mabitso a dihlahiswa kapa dikhamphani tse ding ntle le maikemisetso a ho tlola molao.

Boitlhotlhollo ba litiisetso: Lumens Digital Optics Inc. ha e ikarabelle bakeng sa liphoso leha e le life tse ka bang teng tsa thekenoloji, tsa bongoli kapa tse sieo, ebile ha e ikarabelle bakeng sa tšenyo efe kapa efe ea tšohanyetso kapa e amanang le eona e hlahisoang ke ho fana ka sena. file, ho sebelisa, kapa ho sebelisa sehlahisoa sena.

Khaolo ea 1 Litaelo tsa Polokeho

Kamehla latela litaelo tsena tsa polokeho ha o seta le ho sebelisa HD Camera:

1. Sebelisa li-attachments feela joalokaha ho khothalletsoa.
2. Sebelisa mofuta oa mohloli oa matla o bontšitsoeng sehlahisoa sena. Haeba o sena bonnete ba mofuta oa motlakase o fumanehang, ikopanye le morekisi oa hau kapa motlakase oa lehae
   khampani bakeng sa likeletso.
3. Kamehla nka mehato e latelang ea tlhokomelo ha u sebetsana le polaka. Ho sitoa ho etsa joalo ho ka baka tlhase kapa mollo:
   Etsa bonnete ba hore polaka ha e na lerōle pele ue kenya ka sekoting.
   Etsa bonnete ba hore polaka e kentsoe ka soketeng ka mokhoa o sireletsehileng.
4. Se ke oa imetsa masokisi a mabota haholo, lithapo tsa katoloso kapa liboto tse ngata tsa polaka hobane sena se ka baka ts'abo ea mollo kapa ea motlakase.
5. Se ke oa beha sehlahisoa moo mohala o ka hatisoang kaha sena se ka baka ho putlama kapa ho senyeha ha lead kapa plug.
6. Le ka mohla u se ke ua lumella mokelikeli oa mofuta ofe kapa ofe ho tšela sehlahisoa seo.
7. Ntle le joalokaha ho laetsoe ka ho hlaka Bukeng ena ea Mosebelisi, u se ke ua leka ho sebelisa sehlahisoa sena u le mong. Ho bula kapa ho tlosa likoahelo ho ka u pepesetsa kotsi ea voltages le likotsi tse ling. Fetisetsa lits'ebeletso tsohle ho basebetsi ba nang le lengolo la tumello.
8.  Tlosa HD Camera nakong ea lialuma kapa haeba e ke ke ea sebelisoa nako e telele. Se ke oa beha HD Camera kapa remote control holim'a lisebelisoa tse thothomelang kapa lintho tse chesang joalo ka koloi, jj.
   Tlosa HD Camera leboteng 'me u fetisetse ho basebeletsi ba nang le laesense ha maemo a latelang a etsahala:
   ⇒ Haeba thapo ea motlakase kapa polaka e senyeha kapa ea senyeha.
   ⇒ Haeba mokelikeli o tšolohile sehlahisoa kapa sehlahisoa se pepeselitsoe pula kapa metsi.
   ⇒ Mehato ya tlhokomelo

Tlhokomeliso: Ho fokotsa kotsi ea mollo kapa motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.

Haeba molaoli oa keyboard a ke ke a sebelisoa nako e telele, o se ntše ka soketeng ea motlakase.

Tlhokomeliso ea FCC

Khamera ena ea HD e lekile mme ea fumanoa e latela melaoana ea sesebelisoa sa komporo sa Class B, ho latela Article 15-J ea Melao ea FCC Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo.

Sesebelisoa sena sa dijithale ha se fete meeli ea Sehlopha B bakeng sa moea o tsoang moeeng oa lisebelisoa tsa dijithale joalo ka ha ho boletsoe tekanyetso ea lisebelisoa tse bakang tšitiso e bitsoang "Lisebelisoa tsa Digital," ICES-003 ea Industry Canada.

2. Sehlahisoa Overview

2.1 Selelekela sa I / O

Selelekela sa Mosebetsi oa Panel

2.3 Tlhaloso ea Screen Screen ea LCD

3. LCD Function Menu Tlhaloso

3.1 Phihlelo ea Mosebetsi oa LCD

Tobetsa konopo ea SETUP lebokoseng ho fihlella menu ea ts'ebetso ea LCD.
Ha o hlophisa li-setting tsa LCD, o tlameha ho kenya phasewete nako le nako (phasewete ea pele ke 0000)

4. Tlhaloso ea Khokahano ea Khamera

VS-KB30 e ts'ehetsa ho tšela protocol ea taolo ea lebasetere lipakeng tsa RS232, RS422 le IP.
Mekhoa e laoloang ea taolo e kenyelletsa: VISCA, PELCO D / P, VISCA ho feta IP

4.1 Tlhaloso ea Pin ea Port

4.2 Mokhoa oa ho hokela RS-232

1. Kopanya thapo ea RJ-45 ho RS232 adapta ho koung ea RS232 ea VS-KB30
2. Ka kopo sheba ho RJ-45 ho RS232 adapter cable le kh'amera Mini Din RS232 pin pin litlhaloso ho phethela khokahano ea cable [Remark] Ka kopo netefatsa hore SYSTEM SWITCH DIP1 le DIP3 botlaaseng ba kh'amera ea Lumens li behiloe e le OFF (RS232 & baud rate 9600)

[Hlokomela] VC-AC07 ke ea boikhethelo mme e ka hokahanngoa ka thapo ea netweke

4.3 Mokhoa oa ho hokela RS-422

1. Kopanya thapo ea RJ-45 ho RS232 adapta ho koung ea RS422 ea VS-KB30 (A kapa B)
2. Ka kopo sheba ho RJ-45 ho cable ea RS232 adapter le litlhaloso tsa kh'amera ea RS422 ho phethela khokahano ea cable.

Keletso: Ka kopo etsa bonnete ba hore SYSTEM SWITCH DIP1 le DIP3 botlaaseng ba kh'amera ea Lumens li behiloe joalo ka ON le OFF ka ho latellana (RS422 & baud rate 9600)

4.4 Mokhoa oa ho hokela IP

1. Sebelisa likhoele tsa netweke ho hokela VS-KB30 le khamera ea IP ho router.

Matla a 5.1 ho VS-KB30

Mefuta e 'meli ea phepelo ea motlakase e ka sebelisoa ke VS-KB30

• Phepelo ea motlakase ea DC 12 V: Ka kopo sebelisa adaptara ea phepelo ea motlakase ea DC le thapo ea motlakase, ebe o tobetsa konopo ea motlakase

• Phepelo ea motlakase oa Poe: Sebelisa likhoele tsa Ethernet ho hokela switch ea POE le koung ea IP ea VS-KB30, ebe u tobetsa konopo ea MATLA

[Hlokomela] Likou tsa RJ45 tsa RS232 le RS422 ha li tšehetse POE. Ka kopo se ke oa hokahana le likhoele tsa marang-rang tse tsamaisoang ke POE.

5.2 Thupelo ea RS-232 Setting

• Tobetsa SETUP, ebe u khetha CAMERA SETTING
• Beha CAMID le Sehlooho
• Kamora hore protocol e hlophisoe e le VISCA, tobetsa P / T SPEED ho fihlella maemo a tsoetseng pele.
  Rate Baud e behiloe ka 9600
  Port e hlophisitsoe e le RS232
• Tobetsa EXIT ho tsoa

5.3 Thupelo ea RS-422 Setting

• Tobetsa SETUP, ebe u khetha CAMERA SETTING
• Beha CAMID le Sehlooho
• Kamora hore protocol e hlophisoe e le VISCA, tobetsa P / T SPEED ho fihlella maemo a tsoetseng pele
• Sekhahla sa Baud se behiloe ka 9600
• Boema-kepe bo behiloe joalo ka RS422
• Tobetsa EXIT ho tsoa

Thupelo ea 5.4 mabapi le Setting IP

5.4.1 Ipehele aterese ea IP ea VS-KB30

• Tobetsa SETUP, ebe u khetha KEYBOARD SETTING => IP CONFIGURATION
• Tlanya: Khetha STATIC kapa DHCP
• Aterese ea IP: Haeba u khetha STATIC, sebelisa P / T SPEED ho khetha sebaka, kenya aterese ea IP ka linomoro lebokoseng. Qetellong, tobetsa ZOOM SPEED ho boloka le ho tsoa

5.4.2 Eketsa Lik'hamera

1. Patlo e Iketsang

• Tlanya SERTCH
• Khetha VISCA-IP
  ⇒ VISCA-IP: Batla VISCA ka li-camera tsa IP marang-rang
• Tobetsa ZOOM SPEED ho boloka; ebe o tobetsa EXIT ho tsoa

2. Buka ea Tlatsetso

• Tobetsa SETUP, ebe u khetha CAMERA SETTING
• Beha CAMID le Sehlooho
• Protocol Select VISCA-IP, ebe o seta aterese ea IP ea kh'amera
• Tobetsa ZOOM SPEED ho boloka; ebe o tobetsa EXIT ho tsoa

6. Litlhaloso tsa Mesebetsi e Meholo

6.1 Letsetsa Khamera

6.1.1 Sebelisa keyboard ea dijithale ho letsetsa khamera

1. Senotlolo sa nomoro ea kh'amera se tla bitsoa ka keyboard
2. Tobetsa konopo ea "CAM"

6.1.2 Letsetsa khamera ea IP ka lenane la lisebelisoa

1. Tobetsa konopo ea "BOTSE"
2. Khetha protocol ea kh'amera ea IP
3. Sebelisa konopo ea ZOOM SPEED ho khetha kh'amera e lokelang ho laoloa
4. Khetha "CALL" ebe o tobetsa P / T Lebelo konopo ho netefatsa

6.2 Setup / Call / Hlakola boemo ba Preset.

6.2.1 Qolla boemo bo seng bo setiloe

1. Fetisetsa kh'amera sebakeng se batlang
2. Kenya nomoro ea boemo bo lokiselitsoeng esale pele, ebe o tobetsa o tšoare konopo ea PRESET metsotsoana e 3 ho e boloka

6.2.2 Bitsa boemo ba pele

1. Senotlolo sa nomoro ea boemo bo hlophisitsoeng pele ka keyboard
2. Tobetsa konopo ea "CALL"

6.2.3 Hlakola boemo bo seng bo setiloe

1. Senotlolo sa nomoro ea boemo bo seng bo hlophiloe se lokela ho hlakoloa
2. Tobetsa konopo ea "RESET"

6.3 Ipehele Non-IP Camera OSD Menu ka Keyboard

1. Tobetsa konopo ea "MENU" lebokoseng
2. Seta lenane la kh'amera ea OSD ka thabo ea PTZ

• Tsamaisetsa holimo le tlase. Fetolela lintho tsa menyu / Tlanya litekanyetso tsa parameter
• Tsamaisetsa joystick ka ho le letona: Kena
• Tlosa thabo ea thabo ka ho le letšehali: Tsoa

6.4 Beha PELCO-D Camera OSD Menu ka Keyboard

1. Sebelisa keyboard ea linomoro ho tobetsa konopo ea "95" + "CALL"

6.5 RS422 Set A, Set B switch

1. Tobetsa konopo tsa A kapa B ho chencha lipakeng tsa li-RS422 sets (li-button tsa sete e ntseng e sebelisoa li tla bonesoa)

7. Ho rarolla mathata

Khaolo ena e hlalosa lipotso tse botsoang khafetsa nakong ea ts'ebeliso ea VS-KB30 mme e fana ka maikutlo a mekhoa le tharollo.

※ Bakeng sa lipotso mabapi le ho kenya, ka kopo lekola Khoutu e latelang ea QR. Motho ea tšehetsang o tla abeloa ho u thusa

Phatlalatso ea Mofani ea Tumellano 47 CFR § 2.1077 Litaba tsa Tumellano

Moetsi: Likhamphani tsa Lumens Digital Optics Inc.
Lebitso la Sehlahiswa: EA-KB30
Nomoro ea Mohlala: Molaoli oa Keyboard
Mokha o nang le Boikarabello - Litaba tsa Boikopanyo tsa US
Morekisi: Litlhaloso tsa likarolo tsa Lumens Integration, Inc.
Lekhotla la Clipper la 4116, Fremont, CA 94538, United States
lengolo-tsoibila support@mylumens.com

Polelo ea Tumellano ea FCC

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Litokomane / Lisebelisoa

Lumens Keyboard Controller [pdf] Bukana ea Mosebelisi Molaoli oa Keyboard, VS-KB30

Litšupiso

• Bukana ea Mosebelisi