LIGHTRONICS TL Series TL4008 Memory Control Console

Tlhahisoleseding ya Sehlahiswa

Lebitso la Sehlahiswa	TL4008 MEMORY TAOLI KHOTSO
Moetsi	Litlhaloso tsa likarolo tsa Lightronics Inc.
Phetolelo	1.7
Letsatsi	06/28/2022
Mekhoa ea ho sebetsa	8 kapa 16 ho itšetlehile ka mokhoa
Palo ea Likanale	8 CH x 2 litšoantšo tsa matsoho kapa 16 CH x 1 setšoantšo sa matsoho kapa 8 CH le 8 liketsahalo tse rekotiloeng
Sehopotso sa Sebaka	8 litšoantšo kaofela
Chase Control Protocol	DMX512 e tloaelehileng (Boikhethelo LMX-128 multiplex)
Sehokedi sa Khumo	5 pin female XLR for DMX (Eketsa ka 3 pin XLR for LMX)
Ho lumellana	DMX512 le LMX-128 protocol e tsamaellanang le multiplex tse ling litsamaiso
Kenyeletso ya Matla	12 VDC, 1 Amp phepelo ea motlakase e tsoang kantle
Litekanyo	10.25WX 9.25DX 2.5H
Boima ba 'mele	4.4 Liponto

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

TL4008 control console e lokela ho bolokoa hole le mongobo le mehloli e tobileng ea mocheso.

TL4008 e ka tsamaisoa ke phepelo ea kantle e nang le lintlha tse latelang:

• Khumo Voltage: 12 VDC
• Sephetho sa hajoale: 800 Milliamps bonyane
• Sehokedi: 2.1mm sehokedi sa mosadi
• Bohareng Pin: Polarity e ntle (+).

Lihokelo tsa DMX
Hokela yuniti ho Bokahohle ba DMX u sebelisa thapo ea taolo e nang le likhokahanyo tse 5 tsa XLR. Motlakase o tsoang kantle o tlameha ho sebelisoa haeba ho sebelisoa DMX feela. Sehokelo sa 3 pin XLR bakeng sa DMX sebakeng sa 5 pin XLR ke khetho ha u reka.

DMX 5 Pin/3 Pin Connector Wiring

PIN #	PIN #	LEBITSO LETSATSI
1	1	Tloaelehileng
2	2	Lintlha tsa DMX
3	3	Lintlha tsa DMX +
4	–	Ha e Sebediswe
5	–	Ha e Sebediswe

Likhokahano tsa LMX (Haeba ho hlokahala)
Hokela yuniti ho Lightronics (kapa e lumellanang) dimmer o sebelisa thapo ea taolo ea multiplex e nang le likhokahanyo tsa 3 pin XLR. TL4008 e ka tsamaisoa ke dimmer eo e hokahaneng le eona. E kanna ea tsamaisoa ka phepelo ea motlakase e fanoeng kantle. Yuniti e tla sebetsa ka li-dimmers ka mekhoa ea NSI/SUNN le Lightronics.
Li-dimmers tsohle tse hokahaneng le khokahanyo ea LMX LI TŠOANTŠE ho ba ka mokhoa o TŠOANENG.

LMX-128 Connector Wiring

PIN #	LEBITSO LETSATSI
1	Tloaelehileng
2	Matla a phantom a tsoang ho dimmers (Ka tloaelo +15 VDC)
3	Letšoao la multiplex la LMX-128

Li-buttons le lipontšo

Chase 1 & 2 Likonopo

Tobetsa ho khetha mekhoa ea ho lelekisa. LED ea ho lelekisa e tla khantša ha ho lelekisa ho sebetsa.

Konopo ea Chase Rate

Tobetsa makhetlo a 3 kapa ho feta ka sekhahla seo u se batlang ho seta lebelo la ho lelekisa.
Chase rate LED e tla benya ka sekhahla se khethiloeng.

Konopo ea Blackout
Ho tobetsa konopo ho etsa hore liteishene tsohle, liketsahalo le lelekiso li fihle ho zero intensity. LED e ntšo e tla khantša neng kapa neng ha console e le ka har'a mokhoa oa ho tima.

Letšoao la Blackout
Leseli ha ho tingoa.

Konopo ea ho Rekota
Tobetsa ho rekota liketsahalo le ho lelekisa lipaterone. Rekota LED e tla khanya ha e le mocheng oa rekoto.

Letšoao la Rekoto
Ho khanya ha ho lelekisa kapa ho rekota ketsahalo e ntse e sebetsa.

KHOPOTSO TAOLI MATŠELI

MOEKETSI MOHAPI

Palo ea likanale

• 8 kapa 16 ho itšetlehile ka mokhoa

Mekhoa ea ts'ebetso

• 8 CH x 2 litšoantšo tsa matsoho
• 16 CH x 1 setšoantšo sa matsoho
• 8 CH le 8 litšoantšo tse rekotiloeng

Mehopolo ea sebaka

• 8 litšoantšo kaofela

Lelekisa

• 2 programmable 40 mehato ea ho lelekisa

Laola protocol

• DMX512 e tloaelehileng
• Khetho ea LMX-128 (multiplex)
• Sehokelo sa poelo sa 5 Pin XLR ea basali bakeng sa DMX
• Dikgetho Kenya ho 3 pin XLR bakeng sa LMX
• Sole 3 pin XLR bakeng sa DMX

Ho lumellana

• DMX512
• LMX-128 protocol e tsamaellana le litsamaiso tse ling tsa multiplex

Ho kenya matla

• 12 VDC, 1 Amp kantle
• phepelo ea motlakase e fanoeng

Litekanyo

• 10.25″WX 9.25″DX 2.5″H

Boima ba 'mele

• 4.4 Liponto

Khetho ea LMX-128 ha e khone ho kopanngoa le 3 pin XLR bakeng sa khetho ea DMX.

KEKETSO

TL4008 control console e lokela ho bolokoa hole le mongobo le mehloli e tobileng ea mocheso.
TL4008 e ka tsamaisoa ke phepelo ea kantle e nang le lintlha tse latelang:

• Khumo Voltage: 12 VDC
• Sephetho sa Hona Joale: 800 limilioneamps bonyane
• Sehokelo: 2.1mm sehokelo sa basali
• Pin e Bohareng: Polarity e ntle (+).

DMX Connections: Hokela yuniti ho Bokahohle ba DMX u sebelisa thapo ea taolo e nang le likhokahanyo tse 5 tsa XLR. Motlakase o tsoang kantle o tlameha ho sebelisoa haeba ho sebelisoa DMX feela. Sehokelo sa 3 pin XLR bakeng sa DMX sebakeng sa 5 pin XLR ke khetho ha u reka.

DMX 5 PIN/3 PHIRI YA SEHOHONISI PIN

PIN #	PIN #	LEBITSO LETSATSI
1	1	Tloaelehileng
2	2	Lintlha tsa DMX
3	3	Lintlha tsa DMX +
4	–	Ha e Sebediswe
5	–	Ha e Sebediswe

LMX Connections: (Haeba ho hlokahala) Hokela yuniti ho Lightronics (kapa e lumellanang) dimmer o sebelisa thapo ea taolo ea multiplex e nang le likhokahanyo tsa 3 tsa XLR. TL4008 e ka tsamaisoa ke dimmer eo e hokahaneng le eona. E kanna ea tsamaisoa ka phepelo ea motlakase e fanoeng kantle. Yuniti e tla sebetsa ka li-dimmers ka mekhoa ea NSI/SUNN le Lightronics. Li-dimmers tsohle tse hokahaneng le khokahanyo ea LMX LI TŠOANTŠE ho ba ka mokhoa o TŠOANENG.

LMX-128 Connector Wiring

PIN #	LEBITSO LETSATSI
1	Tloaelehileng
2	Phantom matla ho tloha dimmers Ka tloaelo +15 VDC
3	Letšoao la multiplex la LMX-128

Haeba DMX le LMX li kentsoe ka bobeli, TL4008 e tla fetisetsa DMX le LMX ka bobeli ka nako e le ngoe.

TS'EBETSO

TS'ELISO LE MOLAO

• X Faders: E laola maemo a mocha ka mong bakeng sa likanale 1-8.
• Y Faders: E laola maemo a liketsahalo kapa likanale ka bomong ho latela mokhoa oa hajoale oa ho sebetsa oa 'Y'.
• Konopo ea Mokhoa oa Y: E khetha mokhoa oa ho sebetsa oa li-fader tsa Y.
• Lesupa la Mokhoa oa Y: E bonts'a mokhoa oa hajoale oa ts'ebetso oa li-fader tsa Y.

Cross Faders: Tsena li fana ka bokhoni ba ho fifala lipakeng tsa li-fader tse kaholimo (X) le tse tlase (Y). Mosebetsi oa cross fade o arola likarolo tse peli ho u fa bokhoni ba ho laola boemo ba lihlopha tse ka holimo le tse tlaase tsa li-fader ka bonngoe. Ka mekhoa eohle, X cross fader e tlameha ho ba UP ho kenya li-fader tse ka holimo mme Y cross fader e tlameha ho ba DOWN ho kenya li-fader tse tlase.

• Monghali: E laola boemo ba tlhahiso ea mesebetsi eohle ea console.
• Likonopo tsa Bump: E kenya tshebetsong dikanale 1 ho isa ho 8 ha o ntse o tobetse. The master fader e ama boemo ba liteishene tse kentsoeng ke likonopo tsa bump. Likonopo tsa bump ha li kenye liketsahalo.
• Chase Select: E bulela le ho tima chasi.

www.lightronics.com

• Chase 1 & 2 Likonopo: Tobetsa ho khetha mekhoa ea ho lelekisa. LED ea ho lelekisa e tla khantša ha ho lelekisa ho sebetsa.
• Konopo ea Chase Rate: Tobetsa makhetlo a 3 kapa ho feta ka sekhahla seo u se batlang ho seta lebelo la ho lelekisa. Chase rate LED e tla benya ka sekhahla se khethiloeng.
• Konopo ea Blackout: Ho tobetsa konopo ho etsa hore liteishene tsohle, litšoantšiso le lelekiso li fihle ho zero intensity. LED e ntšo e tla khantša neng kapa neng ha console e le ka har'a mokhoa oa ho tima.
• Letšoao la Blackout: Leseli ha ho tingoa.
• Konopo ea ho Rekota: Tobetsa ho rekota liketsahalo le ho lelekisa lipaterone. Rekota LED e tla khanya ha e le mocheng oa rekoto.
• Letšoao la Rekoto: Ho khanya ha ho lelekisa kapa ho rekota ketsahalo e ntse e sebetsa.

'Y' TS'EBETSO MEKHOA
TL4008 e na le mekhoa e meraro e fapaneng mabapi le li-fader tsa Y. Ho tobetsa konopo ea "Y MODE" ho fetola tšebetso ea li-fader tsa Y (tse tlase tse robeli). Mokhoa o khethiloeng o bontšoa ke li-LED tsa mokhoa oa Y. X (fader tse robeli tse holimo) KA TSOHLE li laola boemo ba likanale 1 ho isa ho 8. Mekhoa e meraro ea ts'ebetso ea Y ke:

• CHAN 1 - 8: Ka bobeli mela ea X le Y ea li-fader e laola mecha ea 1 ho ea ho 8. Sefate sa sefapano se sebelisetsoa ho fetisa taolo pakeng tsa X le Y.
• CHAN 9 - 16: Y faders e laola liteishene tsa 9 ho isa ho 16.
• KETSAHALO EA 1-8: Y fader e laola botebo ba liketsahalo tse 8 tse rekotiloeng.

QALANG
Chase Reset (E seta bocha ho litefello tse hlophisitsoeng tsa feme): Tlosa motlakase ho yuniti. Tšoara likonopo tsa CHASE 1 le CHASE 2. Kenya matla ho yuniti ha u ntse u tšoere likonopo tsena fatše. Tsoela pele ho tšoara likonopo ka metsotsoana e ka bang 5, ebe oa lokolla.

Hlakola Scene (E hlakola lits'oants'o tsohle): Tlosa matla ho yuniti. Tšoara konopo ea RECORD. Kenya matla ho yuniti ha u ntse u tšoere konopo ena fatše. Tsoela pele ho tšoara konopo ka metsotsoana e ka bang 5, ebe oa lokolla.
U lokela ho hlahloba litlhophiso tsa aterese tsa dimmers pele u tsoela pele ka ts'ebetso ea TL4008.

Version 1.7 RECORDING CHASES

1. Tobetsa konopo ea "RECORD", rekoto ea LED e tla khanya.
2. Tobetsa konopo ea "CHASE 1" kapa "CHASE 2" ho khetha ho lelekisa ho rekota.
3. Sebelisa li-fader tsa kanane ho hlophisa likanale tseo u batlang ho li BUA mohatong ona hore li be matla ka botlalo.
4. Tobetsa konopo ea "RECORD" ho boloka mohato le ho fetela mohatong o latelang.
5. Pheta mehato ea 3 le ea 4 ho fihlela mehato eohle e lakatsehang e ngotsoe (ho fihla ho mehato e 40).
6. Tobetsa konopo ea "CHASE 1" kapa "CHASE 2" ho tsoa molemong oa ho rekota. *Ha e hlokehe haeba mehato eohle e 40 e tlalehiloe.

LELEKANG TS'OANE

1. Tobetsa konopo ea "RATE" makhetlo a 3 kapa ho feta ka sekhahla seo u se batlang ho beha lebelo la ho lelekisa.
2. Tobetsa konopo ea "CHASE 1" kapa konopo ea "CHASE 2" ho bulela le ho tima chase.
   Hlokomela: Ho lelekisa ka bobeli ho ka etsahala ka nako e le 'ngoe. Haeba ho lelekisa ho na le mehato e fapaneng, ho ka etsoa mekhoa e rarahaneng ea ho fetola.

TLALEHONG MAKOANE

1. Kenya ts'ebetsong mekhoa ea "CHAN 1– 8" kapa "CHAN 9-16" Y 'me u etse hore ketsahalo e rekhotoe ka ho beha li-fader maemong a batloang.
2. Tobetsa "RECORD".
3. Tobetsa konopo ea bump ka tlase ho Y fader eo u lakatsang ho rekota ketsahalo ho eona.

Hlokomela: Lits'oants'o li kanna tsa rekotoa ka mokhoa oa "SCENE 1-8". Sena se o nolofalletsa ho kopitsa ketsahalo ho e 'ngoe kapa ho theha mefuta e fetotsoeng ea liketsahalo kapele. Ho rekota ho etsahala leha BLACKOUT e butse kapa master fader e theohile.

SEBAKA TS'OANELO

1. Kenya tshebetsong kgetho ya "SCENE 1-8" Y.
2. Tlisa fader moleng o ka tlase (Y fader) e nang le ketsahalo e tlalehiloeng ho eona.

Hlokomela: Sefate sa "Y" se tlameha ho ba FASE ho sebelisa li-fader tse tlase (Y).

PHAKAMA TS'OANELO

Sekoahelo se ka tlase sa TL4008 se na le litaelo tse khutšoane bakeng sa liketsahalo le ho lelekisa. Litaelo ha lia rereloa ho nka sebaka sa bukana ena 'me li lokela ho ba joalo viewed e le "likhopotso" bakeng sa basebelisi ba seng ba ntse ba tseba ts'ebetso ea TL4008.

TS'OANELO LE TOKA

HO BATLE PHOSO 

1. Sheba hore thapo ea DMX/LMX ha e na phoso.
2. Ho nolofatsa ho rarolla mathata – seta yuniti botjha ho fana ka maemo a tsebahalang.
3. Etsa bonnete ba hore li-switches tsa dimmer diaterese li behiloe ho likanale tse lakatsehang.

TS'ELISO MOHAPI
Tsela e molemohali ea ho lelefatsa bophelo ba TL4008 ea hau ke ho e boloka e omme, e pholile, e hloekile ebile e koahetsoe ha e sa sebelisoe.
Karolo e kantle e ka hloekisoa ka lesela le bonolo dampe kentsoeng ka motsoako o bobebe oa sesepa / metsi kapa mochini o hloekisang oa mofuta o bobebe. U SE KE UA TŠASA MOLELEKI OFE KA TENG yuniting. U SE KE UA NOA yuniti ka har'a mokelikeli ofe kapa ofe kapa ho lumella mokelikeli ho kena taolong. U SE KE UA SEBELISA lihloekisi life kapa life tse thehiloeng ho solvent kapa abrasive yuniti.
Li-faders ha li hloeke. Haeba u sebelisa sehloeki ho tsona - se tla tlosa lubrication ho tloha libakeng tse thellang. Hang ha sena se etsahala ho ke ke ha khoneha ho li tlotsa hape.
Lithapa tse tšoeu ka holim'a li-fader ha li koaheloe ke waranti ea TL4008. Haeba u li tšoaea ka enke leha e le efe e sa feleng, pente joalo-joalo ho ka etsahala hore u se ke ua khona ho tlosa matšoao ntle le ho senya marapo.
Ha ho na likarolo tse sebelisoang ke basebelisi yuniti. Ts'ebeletso e etsoang ke ba bang ntle le baemeli ba lumelletsoeng ba Lightronics e tla hlakola waranti ea hau.

THUSO EA HO SEBELISA LE TLOBELO
Basebeletsi ba barekisi le ba Lightronics ba ka u thusa ka mathata a ts'ebetso kapa a tlhokomelo. Ka kopo bala likarolo tse sebetsang tsa bukana ena pele u kopa thuso. Haeba tšebeletso e hlokahala - ikopanye le morekisi eo u rekileng unit ho eena kapa ikopanye le Lightronics Service Dept., 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.

TIISETSO TSEBISO LE HO INGOLISA - TLANYA LINK KA KA tlase
www.lightronics.com/warranty.html

Litokomane / Lisebelisoa

LIGHTRONICS TL Series TL4008 Memory Control Console [pdf] Buka ea Mong'a TL4008 Memory Control Console, TL4008, Memory Control Console, Control Console, Console

Litšupiso

• Bukana ea Mosebelisi