LIGHTRONICS TL Series TL4008 Memory Control Console

Zambiri Zamalonda

Dzina lazogulitsa	TL4008 MEMORY CONTROL CONSOLE
Wopanga	Malingaliro a kampani Lightronics Inc.
Baibulo	1.7
Tsiku	06/28/2022
Njira Zogwirira Ntchito	8 kapena 16 kutengera mode
Chiwerengero cha Channels	8 CH x 2 zithunzi zamanja kapena 16 CH x 1 mawonekedwe amanja kapena 8 CH ndi 8 zojambulidwa
Scene Memory	8 chiwonetsero chonse
Chase Control Protocol	Standard DMX512 (Mwasankha LMX-128 multiplex)
Cholumikizira cholumikizira	5 pini XLR yachikazi ya DMX (Onjezani mapini 3 a XLR a LMX)
Kugwirizana	DMX512 ndi LMX-128 protocol yogwirizana ndi ma multiplex ena machitidwe
Kulowetsa Mphamvu	12 VDC, 1 Amp kunja magetsi operekedwa
Makulidwe	10.25WX 9.25DX 2.5H
Kulemera	4.4 mapaundi

Malangizo Ogwiritsira Ntchito Zogulitsa

Kuyika

TL4008 control console iyenera kusungidwa kutali ndi chinyezi komanso kutentha komwe kumachokera.

TL4008 ikhoza kuyendetsedwa ndi zinthu zakunja zomwe zili ndi izi:

• Kutulutsa Voltagndi: 12 VDC
• Zotulutsa Pakalipano: 800 Milliamps osachepera
• Cholumikizira: 2.1mm cholumikizira chachikazi
• Pini Yapakati: Polarity yabwino (+)

Zogwirizana ndi DMX
Lumikizani chipangizochi ku DMX Universe pogwiritsa ntchito chingwe chowongolera chokhala ndi zolumikizira 5 pini XLR. Mphamvu yakunja iyenera kugwiritsidwa ntchito ngati DMX ikugwiritsidwa ntchito. Cholumikizira cha 3 pin XLR cha DMX m'malo mwa 5 pin XLR ndi njira yomwe mungasankhire poyitanitsa.

DMX 5 Pin/3 Pin Connector Wiring

PIN #	PIN #	DZINA LA CHIZINDIKIRO
1	1	Wamba
2	2	Zithunzi za DMX-
3	3	Zithunzi za DMX +
4	–	Osagwiritsidwa Ntchito
5	–	Osagwiritsidwa Ntchito

Kulumikizana kwa LMX (Ngati kuli kotheka)
Lumikizani chipangizochi ku Lightronics (kapena yogwirizana) ndi dimmer pogwiritsa ntchito chingwe chowongolera cha multiplex chokhala ndi zolumikizira 3 pini XLR. TL4008 imatha kuyendetsedwa ndi dimmer yomwe imalumikizidwa nayo. Itha kuyendetsedwanso kudzera pamagetsi akunja omwe aperekedwa. Chipangizocho chidzagwira ntchito ndi ma dimmers mumitundu yonse ya NSI/SUNN ndi Lightronics.
Ma dimmers onse olumikizidwa ndi kulumikizana kwa LMX AYENERA kukhala munjira IMODZI.

LMX-128 Cholumikizira Wiring

PIN #	DZINA LA CHIZINDIKIRO
1	Wamba
2	Mphamvu ya phantom kuchokera ku dimmers (Nthawi zambiri +15 VDC)
3	Chizindikiro cha LMX-128 multiplex

Mabatani ndi Zizindikiro

Chase 1 & 2 Mabatani

Dinani kuti musankhe njira zothamangitsira. Kuthamangitsa LED kudzawala pamene kuthamangitsa kukugwira ntchito.

Chase Rate Button

Dinani katatu kapena kupitilira apo pamlingo womwe mukufuna kuti mukhazikitse liwiro lothamangitsa.
Chase rate LED idzawunikira pamlingo wosankhidwa.

Blackout batani
Kukanikiza batani kumapangitsa kuti ma tchanelo, mawonedwe, ndi kuthamangitsa zonse zipitirire zero. LED yakuda imayatsa nthawi iliyonse console ili mumdima wakuda.

Blackout Indicator
Kuyatsa pamene mdima ukugwira ntchito.

Lembani batani
Dinani kuti mujambule zochitika ndikuthamangitsa mapatani. Record LED idzawala mukamalemba.

Chizindikiro Chalemba
Kuwala pamene kuthamangitsa kapena kujambula zochitika zikugwira ntchito.

MEMORY CONTROL CONSOL

MANKHWALA A MWENYE

Chiwerengero cha mayendedwe

• 8 kapena 16 kutengera mode

Njira zogwirira ntchito

• 8 CH x 2 zithunzi zamanja
• 16 CH x 1 mawonekedwe amanja
• 8 CH ndi 8 zojambulidwa

Scene memory

• 8 chiwonetsero chonse

Kuthamangitsa

• 2 programmable 40 masitepe akuthamangitsa

Control protocol

• Mtengo wa DMX512
• Mwasankha LMX-128 (multiplex)
• Cholumikizira chotulutsa 5 pini XLR chachikazi cha DMX
• Zosankha Onjezani pa 3 pini XLR ya LMX
• Sole 3 pini XLR ya DMX

Kugwirizana

• DMX512
• protocol ya LMX-128 yogwirizana ndi machitidwe ena ambiri

Kulowetsa mphamvu

• 12 VDC, 1 Amp zakunja
• magetsi operekedwa

Makulidwe

• 10.25″WX9.25″DX2.5″H

Kulemera

• 4.4 mapaundi

Chosankha cha LMX-128 sichingathe kuphatikizidwa ndi 3 pini XLR ya njira ya DMX.

KUYANG'ANIRA

TL4008 control console iyenera kusungidwa kutali ndi chinyezi komanso kutentha komwe kumachokera.
TL4008 ikhoza kuyendetsedwa ndi zinthu zakunja zomwe zili ndi izi:

• Kutulutsa Voltage: 12 VDC
• Zotulutsa Panopa: 800 miliyoniamps osachepera
• Cholumikizira: 2.1mm cholumikizira chachikazi
• Pin yapakati: Polarity yabwino (+).

DMX ZOTHANDIZA: Lumikizani chipangizochi ku DMX Universe pogwiritsa ntchito chingwe chowongolera chokhala ndi zolumikizira 5 pini XLR. Mphamvu yakunja iyenera kugwiritsidwa ntchito ngati DMX ikugwiritsidwa ntchito. Cholumikizira cha 3 pin XLR cha DMX m'malo mwa 5 pin XLR ndi njira yomwe mungasankhire poyitanitsa.

DMX 5 PIN/3 PIN CONNECTOR WIRING

PIN #	PIN #	DZINA LA CHIZINDIKIRO
1	1	Wamba
2	2	Zithunzi za DMX-
3	3	Zithunzi za DMX +
4	–	Osagwiritsidwa Ntchito
5	–	Osagwiritsidwa Ntchito

LMX ZOTHANDIZA: (Ngati n'koyenera) Lumikizani chipangizochi ku Lightronics (kapena yogwirizana) ndi dimmer pogwiritsa ntchito chingwe chowongolera cha multiplex chokhala ndi zolumikizira 3 pini XLR. TL4008 imatha kuyendetsedwa ndi dimmer yomwe imalumikizidwa nayo. Itha kuyendetsedwanso kudzera pamagetsi akunja omwe aperekedwa. Chipangizocho chidzagwira ntchito ndi ma dimmers mumitundu yonse ya NSI/SUNN ndi Lightronics. Ma dimmers onse olumikizidwa ndi kulumikizana kwa LMX AYENERA kukhala munjira IMODZI.

LMX-128 Cholumikizira Wiring

PIN #	DZINA LA CHIZINDIKIRO
1	Wamba
2	Mphamvu ya phantom kuchokera ku dimmers Nthawi zambiri +15 VDC
3	Chizindikiro cha LMX-128 multiplex

Ngati onse a DMX ndi LMX ayikidwa, TL4008 imatumiza onse DMX ndi LMX nthawi imodzi.

NTCHITO

CHIZINDIKIRO NDI MALANGIZO

• X Faders: Imawongolera magawo a tchanelo payekhapayekha pamakanema 1-8.
• Y Faders: Imawongolera magawo azithunzi kapena tchanelo payekhapayekha kutengera momwe 'Y' akugwirira ntchito.
• Batani la Y Mode: Imasankha mawonekedwe ogwiritsira ntchito a Y fader.
• Y Mode Indicator: Imawonetsa mawonekedwe amakono a Y fader.

Cross Faders: Izi zimapereka kuthekera kwa kuzimiririka pakati pa ma fader apamwamba (X) ndi ma faders otsika (Y). Ntchito yodutsa pamtanda imagawanika m'magawo awiri ndikukupatsani mphamvu yolamulira magulu apamwamba ndi apansi a faders payekha. M'njira zonse, X cross fader iyenera kukhala UP kuti atsegule ma fader apamwamba ndipo Y cross fader iyenera kukhala PASI kuti atsegule zotsitsa.

• Mphunzitsi: Imawongolera kuchuluka kwa magwiridwe antchito onse a console.
• Mabatani a Bomba: Imayatsa tchanelo 1 mpaka 8 mukanikizidwa. The master fader imakhudza mulingo wa mayendedwe oyendetsedwa ndi mabatani oyambira. Mabatani a bamp sayambitsa mawonekedwe.
• Chase Select: Kuyatsa kuthamangitsa ndi kuzimitsa.

www.lightronics.com

• Chase 1 & 2 Mabatani: Dinani kuti musankhe njira zothamangitsira. Kuthamangitsa LED kudzawala pamene kuthamangitsa kukugwira ntchito.
• Batani la Chase Rate: Dinani katatu kapena kupitilira apo pamlingo womwe mukufuna kuti mukhazikitse liwiro lothamangitsa. Chase rate LED idzawunikira pamlingo wosankhidwa.
• Blackout Batani: Kukanikiza batani kumapangitsa kuti ma tchanelo onse, mawonedwe ndi kuthamangitsa kupitirire zero kwambiri. LED yakuda imayatsa nthawi iliyonse console ili mumdima wakuda.
• Chizindikiro cha Blackout: Kuyatsa pamene mdima ukugwira ntchito.
• Lembani batani: Dinani kuti mujambule zochitika ndikuthamangitsa mapatani. Record LED idzawala mukamalemba.
• Chizindikiro Chalemba: Kuwala pamene kuthamangitsa kapena kujambula zochitika zikugwira ntchito.

'Y' OPERATING modes
TL4008 ili ndi mitundu itatu yosiyanasiyana yokhudzana ndi ma Y faders. Kukanikiza batani la "Y MODE" kumasintha magwiridwe antchito a Y (otsika asanu ndi atatu). Njira yosankhidwa imasonyezedwa ndi ma LED a Y mode. X (ma fader asanu ndi atatu apamwamba) NTHAWI ZONSE amayang'anira kuchuluka kwa ma tchanelo 1 mpaka 8. Njira zitatu zogwirira ntchito za Y ndi:

• CHAN 1-8: Mizere yonse ya X ndi Y ya ma faders amawongolera njira 1 mpaka 8. Fader yodutsa imagwiritsidwa ntchito kusamutsa kuwongolera pakati pa X ndi Y.
• CHAN 9-16: Y faders amawongolera mayendedwe 9 mpaka 16.
• NKHANI 1-8: Y faders amawongolera kuchulukira kwazithunzi 8 zojambulidwa.

Kukhazikitsa koyamba
Chase Reset (Kukhazikitsanso zothamangitsa ku fakitale zosinthidwa): Chotsani mphamvu pagawo. Gwirani mabatani a CHASE 1 ndi CHASE 2. Ikani mphamvu pa chipangizocho mukugwira mabatani awa pansi. Pitirizani kukanikiza mabatani pafupifupi masekondi 5, kenako ndikumasula.

Fufutani zochitika (Imachotsa zochitika zonse): Chotsani mphamvu pagawo. Gwirani pansi batani la RECORD. Ikani mphamvu ku yuniti pamene mukugwira batani ili pansi. Pitirizani kukanikiza batani kwa masekondi pafupifupi 5, ndikumasula.
Muyenera kuyang'ana ma adilesi a dimmers musanapitirize ntchito ya TL4008.

Mtundu wa 1.7 RECORDING CHASES

1. Dinani batani la "RECORD", mbiri ya LED idzawala.
2. Dinani batani la "CHASE 1" kapena "CHASE 2" kuti musankhe kuthamangitsa kuti mulembe.
3. Gwiritsani ntchito ma fader a tchanelo kuti mukhazikitse tchanelo(ma)chanelo omwe mukufuna kuti mukhale WOYANG'ANIRA pa sitepe iyi kuti ikhale yamphamvu kwambiri.
4. Dinani batani la "RECORD" kuti musunge sitepe ndikupita ku sitepe yotsatira.
5. Bwerezani masitepe 3 ndi 4 mpaka zonse zomwe mukufuna zitalembedwa (mpaka masitepe 40).
6. Dinani batani la "CHASE 1" kapena "CHASE 2" kuti mutuluke mumachitidwe ojambulira. *Sizofunikira ngati masitepe 40 onse adajambulidwa.

THAWITSA MASEWERO

1. Dinani batani la "RATE" katatu kapena kupitilira apo pamlingo womwe mukufuna kuti mukhazikitse liwiro lothamangitsa.
2. Dinani batani la "CHASE 1" kapena "CHASE 2" batani kuti mutsegule ndi kuzimitsa.
   Zindikirani: Kuthamangitsa konseko kungathe kuchitika nthawi imodzi. Ngati kuthamangitsa kuli ndi masitepe osiyanasiyana, zovuta zosinthira zitha kupangidwa.

ZOKHALITSA ZOCHITA

1. Yambitsani zosankha za "CHAN 1- 8" kapena "CHAN 9-16" Y ndikupanga mawonekedwe kuti ajambulidwe poyika ma fader pamilingo yomwe mukufuna.
2. Dinani "RECORD".
3. Dinani batani loyambira pansi pa Y fader yomwe mukufuna kujambulako.

Zindikirani: Zochitika zithanso kujambulidwa mu "SCENE 1-8". Izi zimakupatsani mwayi wokopera chochitika china kapena kupanga mawonekedwe osinthidwa mwachangu. Kujambulira kumachitika ngakhale BLACKOUT ikayatsidwa kapena master fader ili pansi.

KUSEWERA KWA SCENE

1. Yambitsani njira ya "SCENE 1-8" Y.
2. Bweretsani fader pamzere wapansi (Y fader) yomwe ili ndi chochitika chojambulidwa.

Zindikirani: "Y" mtanda fader iyenera kukhala PASI kuti mugwiritse ntchito zocheperako (Y).

MALANGIZO OYAMBA KWAMBIRI

Chivundikiro chapansi cha TL4008 chili ndi malangizo achidule azithunzi ndi kuthamangitsa. Malangizowo sanapangidwe kuti alowe m'malo mwa bukuli ndipo akuyenera kukhala viewed ngati "zikumbutso" kwa ogwiritsa ntchito omwe amadziwa kale ntchito ya TL4008.

KUKONZA NDI KUKONZA

KUSAKA ZOLAKWIKA 

1. Onetsetsani kuti chingwe cha DMX/LMX chilibe cholakwika.
2. Kuti muchepetse zovuta - yambitsaninso chipangizocho kuti chipereke mawonekedwe odziwika.
3. Onetsetsani kuti ma switch a dimmer ayikidwa kumayendedwe omwe mukufuna.

KUKONZEDWA KWA MWENI
Njira yabwino yotalikitsira moyo wa TL4008 yanu ndikuyisunga yowuma, yoziziritsa, yoyera komanso yophimbidwa ngati siyikugwiritsidwa ntchito.
Kunja kwake kungatsukidwe pogwiritsa ntchito nsalu yofewa dampchophimbidwa ndi chotsukira pang'ono/madzi osakaniza kapena chotsukira chopopera pang'ono. MUSAMATSIRIRE MVULA ALIYENSE mwachindunji pa chipangizocho. MUSAMVETSE yuniti mumadzi aliwonse kapena kulola kuti madzi alowe muzowongolera. MUSAMAGWIRITSE NTCHITO zotsukira zosungunulira kapena zotsuka pa unit.
Ma faders sangayeretsedwe. Ngati mumagwiritsa ntchito chotsuka mwa iwo - chidzachotsa mafuta odzola kuchokera kumalo otsetsereka. Izi zikachitika sikutheka kuwadzozanso mafuta.
Mizere yoyera pamwamba pa ma faders samaphimbidwa ndi chitsimikizo cha TL4008. Ngati mulembapo ndi inki yokhazikika, penti ndi zina zotero ndizotheka kuti simungathe kuchotsa zolembera popanda kuwononga zingwe.
Palibe magawo omwe angagwiritsidwe ntchito mu unit. Kutumizidwa ndi ena kupatula othandizira ovomerezeka a Lightronics kudzachotsa chitsimikizo chanu.

KUGWIRITSA NTCHITO NDI KUSUNGA THANDIZO
Ogulitsa ndi a Lightronics atha kukuthandizani ndi zovuta zantchito kapena kukonza. Chonde werengani magawo omwe ali nawo mubukhuli musanapemphe thandizo. Ngati ntchito ikufunika - funsani wogulitsa yemwe mudagulako unit kapena funsani Lightronics Service Dept., 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.

CHIZINDIKIRO CHAKUTI NDI KUlembetsa - DINANI LINK PASI
www.lightronics.com/warranty.html

Zolemba / Zothandizira

LIGHTRONICS TL Series TL4008 Memory Control Console [pdf] Buku la Mwini TL4008 Memory Control Console, TL4008, Memory Control Console, Control Console, Console

Maumboni

• Buku Logwiritsa Ntchito