IRONBISON IB-CCS1-03 Tataiso ea ho Kenya Bumper e ka Pele
Torque le lisebelisoa
90-180 mets
Ho Seha Ha ho Hlokahale
Ho Cheka ha ho Hlokehang
| Boholo ba Fastener | Torque e tiisang (ft-lbs) | Wrench e Hlokahala | Allen Wrench e Hlokahala | ||
|
|
 |
|
|
|
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
| PELE KENYA
TLHOKOMELA LEKOSI. TIISETSA LIKAROLO TSOHLE TSE LENG TENG LI ITŠEHA KA LETHATA LA LIKAROLO. BALA LITAELO KA HLOKO PELE O QALA HO ETSA. THUSO E COMPOTSOE HAHOLO HO QOBA KOTSI KAPA TŠENYEHO E KA KA HONANG LE KOLOI. |
|||||
| Sebelisa ho hokelaBracket ea Frame hoforeimi： |
x8 |
| Sebelisa ho hokela Bumper ho ea Bracket ea Frame: |
x6 |
| Sebelisa ho hokela Center Mesh Fill Panel kapa LED Light Bar ho Bumper: |
x4 8mm x 25 limilimithara |
| Sebelisa ho hokelaMapheo ho ea Bumper: | 8mm x 20 limilimithara Hex Bolt  8mm x 16 limilimithara Hlatsoa ka Sephara  8mm Flange Nut  6mm x 20 limilimithara Combo Bolt  6mm Flange Nut  |
| Sebelisa ho hokela Li-brackets tsa Leseli tsa LED Cube le Liphanele tsa Outer Mesh Tlatsa ho Bumper: |
6mm x 20 limilimithara |
| Sebelisa ho hokela License Plate Bracket ho Bumper: |
x2 |
| Use to attachhjihjuuihyu8hu8hyu8yu8hy8y8y8y7gy7y7y76y766 theLi-Sensors tsa ho pakathe Bumper： |
x2 |
MOHATO 1Bula hood 'me u tlose sekoaelo sa polasetiki ho tloha ka holim'a grille le radiator, (Setšoantšo sa 1).
Tlosa sekoahelo le likurufu tse hokelang grille
Mefuta e nang le kh'amera e kentsoeng ka grille, kh'amera e sa kengoang. Ka mor'a moo, tlosa li-screws tse hokelang grille ho tšehetso ea mantlha ea radiator. Ha lisebelisoa tsohle li se li tlositsoe, hula grille ka kotloloho ho tsoa koloing ho lokolla grille likotong, (Setšoantšo sa 2).
Beha grille sebakeng se hloekileng, se bonolo.
(Setšoantšo sa 1) Tlosa sekoahelo le li-screw tse khomaretsang grille
(setšoantšo sa 2) Hula lesela ka thata ka ntle ho koloi
MOHATO 2
Tlosa poleiti ea laesense le borakete. Meetsong e nang le mabone a fektheri a moholi le/kapa lisensara tsa bumper, lokolla lithapo tse lebisang ho bumper, (Setšoantšo sa 3).
Ka terata ea mopalami/ea ka ho le letona, ntša lithapo tsa likhoele tse lebisang ho bumper e ka pele (motsu)
HLOKOMELA: Sehokelo sa likhoele se lutse holimo le ka morao ho mopalami/lehlakoreng le letona la bumper. Hlakola likotoana tse hokelang mopalami/ fender liner ho fihlella polaka bakeng sa marapo. Tlosa marapo hole le bumper.
MOHATO 3
Ho tloha ka mor'a mokhanni / lehlakoreng le letšehali la bumper, tlosa hardware e hokelang tšehetso ea bumper e ka ntle lehlakoreng la pheletso e kantle ea bumper, (Setšoantšo sa 4).
Tlosa hardware e hokelang bracket ea tšehetso ea kantle ho bumper (motsu)
MOHATO 4
Fumana 'me u tlose liboutu tsa hex tse hokelang tlase ho bumper ho bracket e hokelletsoeng pheletsong ea foreimi, (Setšoantšo sa 5).
Tlosa li-bumper tse tlase (motsu)
MOHATO 5
Pheta Mehato ea 3 & 4 ho tlosa hardware e hokelang bumper ho tšehetso ea mopalami/ea ka ho le letona le bracket e tlase.
MOHATO 6
Khutlela ka holimo ho bumper. Hula pheletsong ea sekoaelo sa rabara lipakeng tsa bumper le radiator ho pepesa liboutu tse hokelang bokaholimo ba bracket ho bracket ea foreimi, (Setšoantšo sa 6).
Hula sekoahelo se ka morao ho fumana liboutu tse holimo
MOHATO 7
Beha li-blocks kapa li-jack stand ka tlas'a bumper e ka pele ho e tšehetsa nakong ea ho tlosa bolt. Hang ha bumper e se e ts'ehelitsoe ka mokhoa o sireletsehileng, ho tloha holimo, tlosa liboutu tse kholo tse hokelang kopano e kholo holim'a bracket e kholo, (Setšoantšo sa 6).
TEMOSO! Ho hlokahala thuso ho ts'oara bumper sebakeng nakong ea ho tlosoa ha bolt ho thibela bumper ho oela. Ka hloko thellela kopano ea bumper ka masakaneng ho tloha lipheletsong tsa foreimi.
TEMOSO! Se ke oa khasa ka tlas'a bumper ntle le haeba e tšehelitsoe hantle holim'a li-blocks kapa li-stand kapa bumper e ka oa.
MOHATO 8
Tlosa lihoko tsa ho hula ka bobeli pheletsong ea foreimi haeba e na le lisebelisoa, (Setšoantšo sa 7)
Tlosa lihakisi tsa ho hula haeba li na le lisebelisoa
MOHATO 9
Khetha bracket ea mokhanni / ka ho le letšehali, (Setšoantšo sa 8).
Sebelisa (1) Left Offset le (1) Right Offset Triple Bolt Plates ho hokela mokhanni/ Bracket ea Frame ea ka ho le letšehali foreiming.
Tsamaisa Bracket ntlheng ea foreime. Kenya (1) Left Offset Triple Bolt Plate qetellong ea foreime le ho tsoa ka masoba lehlakoreng la foreime le Bracket e Homang.
HLOKOMELA: Bracket e 'ngoe le e' ngoe e Tlamang e tla hloka (1) Left Offset le (1) Right Offset Bolt Plate bakeng sa ho kenya.
MOHATO 10
Hokela Bracket ho Left Offset Bolt Plate e kenyellelitsoeng (2) 12mm Flat Washers, (2) 12mm Nylon Lock Nuts, (1) 10mm Flat Washer le (1) 10mm Nylon Lock Nut, (Setšoantšo sa 8). Pheta ho kenya (1) Letlapa la Bolt ea Right Offset likoti tse hopotsang ka lehlakoreng le leng la Bracket ea Frame, (Setšoantšo sa 9).
Bracket ea Mokhanni / le letšehali e kentsoe
(Setšoantšo sa 8) Sebelisa (1) Left Offset le (1) Right Offset Triple Bolt Plates ho hokela mokhanni/ Bracket ea Frame ea ka ho le letšehali foreiming.
(Setšoantšo sa 9) Bracket ea Mokhanni / le letšehali e kentsoe
MOHATO 11
Pheta Mehato ea 9 & 10 ho hokela Bracket ea mopalami / e nepahetseng ea Frame Mounting.
MOHATO 12
Tlosa letamo la moea. Arola bumper ea feme ho tlosa karolo e tlase ea ho tlatsa bumper, (Setšoantšo sa 10).
Arola kopano e ka pele ea bumper ho tlosa bumper e tlase (motsu)
HLOKOMELA: Letamo la moea le phanele ea ho tlatsa li ke ke tsa kenngoa hape.
MOHATO 13
Etsa qeto ea hore na bumper e na le lisensara tsa ho paka pele.
Mehlala e se nang li-sensor:
a. Sututsa li-plug tsa polasetiki tsa Sensor Hole tse kenyellelitsoeng ka har'a masoba bakeng sa li-sensor, (Setšoantšo sa 11). Tlolela Mohato oa 14. Mehlala e nang le li-sensor tsa ho paka.
a. Tlosa 'me u tlose (2) li-sensor tse bohareng ho bumper ea feme.
b. Khetha (1) sensor. Tlosa tiiso ea silicone ho tloha qetellong ea sensor. Tsamaisa Foam Seal e kholoanyane ka pele ho sensor, (Setšoantšo sa 12).
c. Kenya sensor e nang le Seal ka har'a sensor holima hoop ho Bumper, (Setšoantšo sa 13).
d. Beha Foam Spacer qetellong ea sensor. Sututsa Sensor Cap 'me u kenelle holim'a seipone, (Setšoantšo sa 13).
Meetso e se nang li-sensor, kenya li-Plugs tsa polasetiki ka har'a li-sensor mounts ho Bumper Hoop
(Setšoantšo sa 12) Tlosa tiiso ea pele ea silicone ho sensor. Slide e kenyelelitse Foam Seal pheletsong ea sensor
(Setšoantšo sa 13) Sututsa Sensor Cap ka har'a sleeve e ntseng e hola
MOHATO 14
Kopanya bumper ea feme hape. Ho mefuta e nang le lisensara, khetha (1) Wire Harness Extension. Sututsa Harness Extension ka lesoba la sensor mount bohareng ba bumper ea feme ebe o hokela lehare la ka hare la feme. Pheta ho kenya Harness Extension e setseng.
MOHATO 15
Etsa qeto ea hore na mabone a fektheri a moholi, (haeba a na le thepa), mabone a LED Cube, (ha a kenyelelitsoe), kapa haeba ho se mabone a tla kengoa le Bumper.
Mefuta e nang le le ho sebelisa mabone a fog a fektheri hape:
a. Tlohela mabone a moholi a khomaretsoeng ho mora oa polasetiki ka morao oa bumper ea fektheri, (setšoantšo sa 14).
b. Kenya bumper ea feme hape. Ho kengoa mabone a LED a mofuta oa Cube (ha a kenyelelitsoe):
a. Tlosa mabone a moholi a fektheri, (haeba a na le thepa), ho tloha lithabeng tse ka morao ho bumper ea feme, (Setšoantšo sa 15).
b. Khetha mokhanni / ka ho le letšehali LED Cube Light Bracket, (Fig 16). Hokela Bracket ka morao ho Bumper e kenyellelitsoeng (5) 6mm x 20mm Combo Bolts le (5) 6mm Flange Nuts.
c. Hokela Cube Light (Ha e kenyelelitsoe) ho tobetsa ka holim'a Bracket e Mounting.
d. Pheta Mehato e fetileng ho kenya Bracket le khanya ea mopalami / ka ho le letona.
e. HLOKOMELA: Haeba mabone a ke ke a kenngoa, hokela tse kenyellelitsoeng (2) Mesh Fill Panels ho Cube Light Brackets ka (4) 6mm x 20mm Combo Bolts le (4) 6mm Flange Nuts, (Setšoantšo sa 17).
MOHATO 16
Etsa qeto ea hore na setsi sa 20 "LED light bar, (e sa kenyelletsoeng), kapa Mesh Fill Panel e tla kenngoa. Setsi sa 20 "ho kenyeletsoa ha leseli la LED (leseli ha le kenyelelitsoe).
a. Khetha (2) "L" Li-brackets tsa LED, (Setšoantšo sa 18). Hokela Li-Brackets ho (2) li-tab tse holimang ka morao ho bumper tse kenyellelitsoeng (2) 8mm x 25mm Hex Bolts, (4) 8mm x 24mm Flat Washers, (2) 8mm Lock Washers le (2) 8mm Hex Nuts. . Tloha ka nako ena.
b. Hokela lebone la LED ho "L" Li-brackets tsa LED tse nang le lisebelisoa tse kenyellelitsoeng le leseli kapa tse kenyellelitsoeng (2) 8mm x 16mm Hex Bolts, (2) 8mm Lock Washers le (2) 8mm x 24mm Flat Washers, (Fig 18) . U se ke ua tiisa ka botlalo hardware ka nako ena.
c. Latela litaelo tsa moetsi oa leseli ho kenya lebone hantle.
Center Mesh Fill Panel Installation (u se ke ua kenya Tlatsa Panel ka leseli).
a. Pheta Mohato o fetileng oa ho kenya (2) "L" Li-brackets tsa LED.
b. Hokela Center Mesh Fill Panel ho "L" Libakete tsa LED tse kenyellelitsoeng (2) 8mm x 25mm Hex Bolts, (4) 8mm x 24mm Flat Washers, (2) 8mm Lock Washers le (2) 8mm Hex Nuts, (Setšoantšo sa 19).
c. Push Fill Panel holimo ka morao ho Bumper 'me u tiise hardware ka botlalo.
(Setšoantšo sa 18) Hokela "L" Li-Brackets tsa LED haeba u kenya leseli la setsi sa LED (le sa kenyelletsoa) kapa Center Mesh Fill Panel.
Hokela Bracket ea Plate ea License ho BumperMOHATO 18
Haeba laesense poleiti e ka pele e hlokahala, hokela Bracket ea License Plate masobeng a Bumper e kenyellelitsoeng (2) 6mm x 20mm Button Head Screws, (4) 6mm Flat Washers le (2) 6mm Nylon Lock Nuts. Kenya (2) Li-Plugs tsa Plastiki tse Sekwere ka har'a masoba a sekwere ka har'a Bracket, (Setšoantšo sa 21). Sebelisa hape likurufu tsa feme ho hokela laesense plate ho Square Plastic Plugs.
Kenya bumper ea feme hape. Hokela lithapo tsa feme ka har'a thapo e kholo ea koloi.
MOHATO 20
Kenya hape grille ea polasetiki, kh'amera haeba e na le lisebelisoa 'me sekoaelo se tlositsoe Mohato oa 1, (Setšoantšo sa 1).
MOHATO 21
Beha Bumper sefahleho fatše ka pel'a koloi. Mefuta e nang le li-sensor, e hokela li-Wire Harness Extensions ho li-sensor tsa (2) tse ho Bumper, (Setšoantšo sa 22).
(Setšoantšo sa 22) Meetso e nang le lisensara, plug Wire Harness Extensions (sheba Mohato oa 14) ho bumper ea fektheri ka har'a lisensara tse kentsoeng Bumper.
Ka thuso, beha Seboka sa Bumper ho fihlela ka ntle ho qetellong ea foreimi. E tšehetsa boima ba Bumper ka nakoana.
TEMOSO! Se ke oa khasa ka tlas'a bumper ntle le haeba e tšehelitsoe hantle holim'a li-blocks kapa li-stand kapa bumper e ka oa.
MOHATO 23
Beha li-slots (3) holima poleiti ea mokhanni/ka ho le letšehali ka morao ho Bumper ka Bracket ea Frame. Kenya (1) "T" Nut Plate ka morao ho Bracket ea Frame, (Setšoantšo sa 23). Hokela Bumper ho Bracket ea Frame le "T" Nut Plate e kenyellelitsoeng (3) 12mm Hex Bolts, (3) 12mm Lock Washers le (3) 12mm Flat Washers, (Setšoantšo sa 24). Pheta ho hokela mopalami/ lehlakore le letona.
(Setšoantšo sa 24) Mokhanni/lehlakoreng le letšehali la Bumper e khomaretsoeng ho Bracket ea Frame (Hlokomela kemiso ea mabone a cube)
MOHATO 25
Khetha mokhanni/Lepheo le ka tlase le letšehali. Hokela Lepheo qetellong ea Bumper ka (1) 8mm x 20mm Hex Bolt, (1) 8mm x 16mm Washer e Nyane ea Flat le (1) 8mm Flange Nut, (Setšoantšo sa 25 & 26). Hokela bokaholimo ba Lepheo ho ea botlaaseng ba bumper ea fektheri e kenyellelitsoeng (2) 6mm Button Head Combo Bolts le (2) 6mm Flange Nuts, (Setšoantšo sa 26). Pheta Mohato ona ho hokela mopalami/Lepheo le ka Tlase le letona ho Bumper.
(Setšoantšo sa 26) Hokela "Lepheo" la mokhanni/le letšehali qetellong ea Bumper le tlase ho bumper ea feme. Ho kenya litšoantšo ho tloha ka morao ho bumper
(Setšoantšo sa 27) Ho kenya ka botlalo (20" Double Row Light Bar le mabone a mabeli a LED Cube ha a kenyelelitsoe)
MOHATO 26
Etsa tlhahlobo ea nako le nako ha u kenya ho etsa bonnete ba hore lisebelisoa tsohle li bolokehile ebile li tiile.
IRONBISON IB-CCS1-03 Tataiso ea ho Kenya Bumper e ka Pele
Torque le lisebelisoa
| Boholo ba Fastener | Torque e tiisang (ft-lbs) | Wrench e Hlokahala | Allen Wrench e Hlokahala | ||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
| PELE KENYA
TLHOKOMELA LEKOSI. TIISETSA LIKAROLO TSOHLE TSE LENG TENG LI ITŠEHA KA LETHATA LA LIKAROLO. BALA LITAELO KA HLOKO PELE O QALA HO ETSA. THUSO E COMPOTSOE HAHOLO HO QOBA KOTSI KAPA TŠENYEHO E KA KA HONANG LE KOLOI. |
|||||
Lethathamo la Karolo
| Sebelisa ho hokelaBracket ea Frame hoforeimi： | x8x8 x4 x4 12mm x 37mm x 3mm 12mm Nylon 10mm x 30mm x 2.5mm 10mm Washer ea Nylon Flat Lock Nut |
| Sebelisa ho hokela Bumper ho ea Bracket ea Frame: | x6 x6 x612mm x 40mm 12mm Lock 12mm x 37mm x 3mm Hex Bolt Washer |
| Sebelisa ho hokela Center Mesh Fill Panel kapa LED Light Bar ho Bumper: | x4 x8x4 x4 x28mm x 25mm 8mm x 24mm x 2mm 8mm Lock 8mm Hex 8mm x 16mm Hex Bolt Washer e Flat Washer Nut Hex Bolt |
| Sebelisa ho hokelaMapheo ho ea Bumper: | x2 x2 x2 x4 x48mm x 20mm 8mm x 16mm 8mm Flange 6mm x 20mm 6mm Flange Hex Bolt Washer Nut Combo Bolt Nut |
| Sebelisa ho hokela Li-brackets tsa Leseli tsa LED Cube le Liphanele tsa Outer Mesh Tlatsa ho Bumper: | x14 x146mm x 20mm 6mm FlangeCombo Bolt Nut |
| Sebelisa ho hokela License Plate Bracket ho Bumper: | x2 x4 x2 x16mm x 20mm 6mm x 18mm x 1.6mm 6mm Nylon 4mm Allen Button Head Bolt Washer Lock Lock Wrench |
| Sebelisa ho hokelaLi-Sensors tsa ho pakathe Bumper： | x2 x2 x2Sensor Cap Foam Spacer Foam Sealx2Katoloso ea Mohala oa Mohala x2 x6Sensor Hole Plastic plug (Sebelisa Sekoahelong sa Sensor (Koahela mefuta ntle le Sensor e ka Pele) ha e hloleha) |
MOHATO 1
Bula hood 'me u tlose sekoaelo sa polasetiki ho tloha ka holim'a grille le radiator, (Setšoantšo sa 1). Mefuta e nang le kh'amera e kentsoeng ka grille, kh'amera e sa kengoang. Ka mor'a moo, tlosa li-screws tse hokelang grille ho tšehetso ea mantlha ea radiator. Ha lisebelisoa tsohle li se li tlositsoe, hula grille ka kotloloho ho tsoa koloing ho lokolla grille likotong, (Setšoantšo sa 2). Beha grille sebakeng se hloekileng, se bonolo.
(Setšoantšo sa 1) Tlosa sekoahelo le li-screw tse khomaretsang grille
(setšoantšo sa 2) Hula lesela ka thata ka ntle ho koloi
MOHATO 2
Tlosa poleiti ea laesense le borakete. Meetsong e nang le mabone a fektheri a moholi le/kapa lisensara tsa bumper, lokolla lithapo tse lebisang ho bumper, (Setšoantšo sa 3).
HLOKOMELA: Sehokelo sa likhoele se lutse holimo le ka morao ho mopalami/lehlakoreng le letona la bumper. Hlakola likotoana tse hokelang mopalami/ fender liner ho fihlella polaka bakeng sa marapo. Tlosa marapo hole le bumper.
(setšoantšo sa 3) Ka mochini oa mopalami/ka ho le letona, ntša lithapo tse lebisang ho bumper e ka pele (motsu)
MOHATO 3
Ho tloha ka mor'a mokhanni / lehlakoreng le letšehali la bumper, tlosa hardware e hokelang tšehetso ea bumper e ka ntle lehlakoreng la pheletso e kantle ea bumper, (Setšoantšo sa 4).
(setšoantšo sa 4) Tlosa lisebelisoa tse hokelang bracket ea tšehetso ea kantle ho bumper (motsu)
MOHATO 4
Fumana 'me u tlose liboutu tsa hex tse hokelang tlase ho bumper ho bracket e hokelletsoeng pheletsong ea foreimi, (Setšoantšo sa 5).
(Setšoantšo sa 5) Tlosa litšehetso tse tlase tsa bumper (motsu)
MOHATO 5
Pheta Mehato ea 3 & 4 ho tlosa hardware e hokelang bumper ho tšehetso ea mopalami/ea ka ho le letona le bracket e tlase.
MOHATO 6
Khutlela ka holimo ho bumper. Hula pheletsong ea sekoaelo sa rabara lipakeng tsa bumper le radiator ho pepesa liboutu tse hokelang bokaholimo ba bracket ho bracket ea foreimi, (Setšoantšo sa 6).
(Setšoantšo sa 6) Hula sekoaelo se ka morao ho fumana liboutu tse holimo
MOHATO 7
Beha li-blocks kapa li-jack stand ka tlas'a bumper e ka pele ho e tšehetsa nakong ea ho tlosa bolt. Hang ha bumper e se e ts'ehelitsoe ka mokhoa o sireletsehileng, ho tloha holimo, tlosa liboutu tse kholo tse hokelang kopano e kholo holim'a bracket e kholo, (Setšoantšo sa 6).
TEMOSO! Ho hlokahala thuso ho ts'oara bumper sebakeng nakong ea ho tlosoa ha bolt ho thibela bumper ho oela. Ka hloko thellela kopano ea bumper ka masakaneng ho tloha lipheletsong tsa foreimi.
TEMOSO! Se ke oa khasa ka tlas'a bumper ntle le haeba e tšehelitsoe hantle holim'a li-blocks kapa li-stand kapa bumper e ka oa.
MOHATO 8
Tlosa lihoko tsa ho hula ka bobeli pheletsong ea foreimi haeba e na le lisebelisoa, (Setšoantšo sa 7)
(Setšoantšo sa 7) Tlosa li-hook tsa ho hula haeba li na le lisebelisoa
MOHATO 9
Khetha bracket ea mokhanni / ka ho le letšehali, (Setšoantšo sa 8). Tsamaisa Bracket ntlheng ea foreime. Kenya (1) Left Offset Triple Bolt Plate qetellong ea foreime le ho tsoa ka masoba lehlakoreng la foreime le Bracket e Homang.
HLOKOMELA: Bracket e 'ngoe le e' ngoe e Tlamang e tla hloka (1) Left Offset le (1) Right Offset Bolt Plate bakeng sa ho kenya.
MOHATO 10
Hokela Bracket ho Left Offset Bolt Plate e kenyellelitsoeng (2) 12mm Flat Washers, (2) 12mm Nylon Lock Nuts, (1) 10mm Flat Washer le (1) 10mm Nylon Lock Nut, (Setšoantšo sa 8). Pheta ho kenya (1) Letlapa la Bolt ea Right Offset likoti tse hopotsang ka lehlakoreng le leng la Bracket ea Frame, (Setšoantšo sa 9).
(Setšoantšo sa 8) Sebelisa (1) Left Offset le (1) Right Offset Triple Bolt Plates ho hokela mokhanni/ Bracket ea Frame ea ka ho le letšehali foreiming.
(Setšoantšo sa 9) Bracket ea Mokhanni / le letšehali e kentsoe
MOHATO 11
Pheta Mehato ea 9 & 10 ho hokela Bracket ea mopalami / e nepahetseng ea Frame Mounting.
MOHATO 12
Tlosa letamo la moea. Arola bumper ea feme ho tlosa karolo e tlase ea ho tlatsa bumper, (Setšoantšo sa 10).
HLOKOMELA: Letamo la moea le phanele ea ho tlatsa li ke ke tsa kenngoa hape.
MOHATO 13
Etsa qeto ea hore na bumper e na le lisensara tsa ho paka pele.
Mehlala e se nang li-sensor:
a. Sututsa li-plug tsa polasetiki tsa Sensor Hole tse kenyellelitsoeng ka har'a masoba bakeng sa li-sensor, (Setšoantšo sa 11).
Arola kopano e ka pele ea bumper ho tlosa bumper e tlase (motsu)
Tlolela Mohato oa 14. Mehlala e nang le li-sensor tsa ho paka.
a. Tlosa 'me u tlose (2) li-sensor tse bohareng ho bumper ea feme.
b. Khetha (1) sensor. Tlosa tiiso ea silicone ho tloha qetellong ea sensor. Tsamaisa Foam Seal e kholoanyane ka pele ho sensor, (Setšoantšo sa 12).
Tlosa tiiso ea pele ea silicone ho sensor. Slide e kenyelelitse Foam Seal pheletsong ea sensor
c. Kenya sensor e nang le Seal ka har'a sensor mount holim'a hoop ho Bumper, (Setšoantšo sa 13).
d. Beha Foam Spacer qetellong ea sensor. Sututsa Sensor Cap 'me u kene ka holim'a thaba ea sensor, (Setšoantšo sa 13)
Sututsa Sensor Cap ka har'a sleeve e ntseng e hola
MOHATO 14
Kopanya bumper ea feme hape. Ho mefuta e nang le lisensara, khetha (1) Wire Harness Extension. Sututsa Harness Extension ka lesoba la sensor mount bohareng ba bumper ea feme ebe o hokela lehare la ka hare la feme. Pheta ho kenya Harness Extension e setseng.
MOHATO 15
Etsa qeto ea hore na mabone a fektheri a moholi, (haeba a na le thepa), mabone a LED Cube, (ha a kenyelelitsoe), kapa haeba ho se mabone a tla kengoa le Bumper.
Mefuta e nang le le ho sebelisa mabone a fog a fektheri hape:
a. Tlohela mabone a moholi a khomaretsoeng ho mora oa polasetiki ka morao ho bumper ea feme, (Setšoantšo sa 14).
Kopanya bumper ntle le ho kenya bumper e tlase. Ka morao ho mokhanni/lehlakoreng le letšehali la mohlala o nang le leseli la moholi le setšoantšong
b. Kenya bumper ea feme hape. Ho kengoa mabone a LED a mofuta oa Cube (ha a kenyelelitsoe):
a. Tlosa mabone a moholi a fektheri, (haeba a na le thepa), ho tloha lithabeng tse ka morao ho bumper ea feme, (Setšoantšo sa 15).
Tlosa mabone a fektheri ha o kenya mabone a mofuta oa cube ea LED kapa Mesh Fill Panels
b. Khetha mokhanni / ka ho le letšehali LED Cube Light Bracket, (Setšoantšo sa 16).
Kenya Bracket ea mokhanni / ka ho le letšehali ea LED cube light Bracket
Hokela Bracket ka morao ho Bumper e kenyellelitsoeng (5) 6mm x 20mm Combo Bolts le (5) 6mm Flange Nuts.
c. Hokela Cube Light (Ha e kenyelelitsoe) ho tobetsa ka holim'a Bracket e Mounting.
d. Pheta Mehato e fetileng ho kenya Bracket le khanya ea mopalami / ka ho le letona.
e. HLOKOMELA: Haeba mabone a ke ke a kenngoa, hokela tse kenyellelitsoeng (2) Mesh Fill Panels ho Cube Light Brackets ka (4) 6mm x 20mm Combo Bolts le (4) 6mm Flange Nuts, (Setšoantšo sa 17).
Hokela Panel ea Tlatsa ho Bracket ea Leseli haeba ho se khanya e tla kengoa
MOHATO 16
Etsa qeto ea hore na setsi sa 20 "LED light bar, (e sa kenyelletsoeng), kapa Mesh Fill Panel e tla kenngoa. Setsi sa 20 "ho kenyeletsoa ha leseli la LED (leseli ha le kenyelelitsoe).
a. Khetha (2) "L" Li-brackets tsa LED, (Setšoantšo sa 18).
Hokela "L" Li-Brackets tsa LED haeba u kenya leseli la setsi sa LED (le sa kenyelletsoa) kapa Center Mesh Fill Panel.
Hokela Li-Brackets ho (2) li-tab tse holimang ka morao ho bumper tse kenyellelitsoeng (2) 8mm x 25mm Hex Bolts, (4) 8mm x 24mm Flat Washers, (2) 8mm Lock Washers le (2) 8mm Hex Nuts. . Tloha ka nako ena.
b. Hokela lebone la LED ho "L" Li-brackets tsa LED tse nang le lisebelisoa tse kenyellelitsoeng le leseli kapa tse kenyellelitsoeng (2) 8mm x 16mm Hex Bolts, (2) 8mm Lock Washers le (2) 8mm x 24mm Flat Washers, (Setšoantšo sa 18). U se ke ua tiisa ka botlalo hardware ka nako ena.
c. Latela litaelo tsa moetsi oa leseli ho kenya lebone hantle.
Center Mesh Fill Panel Installation (u se ke ua kenya Tlatsa Panel ka leseli).
a. Pheta Mohato o fetileng oa ho kenya (2) "L" Li-brackets tsa LED.
b. Hokela Center Mesh Fill Panel ho "L" Libakete tsa LED tse kenyellelitsoeng (2) 8mm x 25mm Hex Bolts, (4) 8mm x 24mm Flat Washers, (2) 8mm Lock Washers le (2) 8mm Hex Nuts, (Setšoantšo sa 19).
Hokela Center Mesh Fill Panel ho "L" LED Brackets (Se ke oa kenya Fill Panel ka leseli la LED)
c. Push Fill Panel holimo ka morao ho Bumper 'me u tiise hardware ka botlalo.
Hokela Edge Trim e kenyellelitsoeng pheletsong e kaholimo ea Bumper, (Setšoantšo sa 20).
Kenya Rubber Trim pheletsong ea Bumper
Haeba laesense poleiti e ka pele e hlokahala, hokela Bracket ea License Plate masobeng a Bumper e kenyellelitsoeng (2) 6mm x 20mm Button Head Screws, (4) 6mm Flat Washers le (2) 6mm Nylon Lock Nuts. Kenya (2) Li-Plugs tsa Plastiki tse Sekwere ka har'a masoba a sekwere ka har'a Bracket, (Setšoantšo sa 21). Sebelisa hape likurufu tsa feme ho hokela laesense plate ho Square Plastic Plugs.
Hokela Bracket ea Plate ea License ho Bumper
Kenya bumper ea feme hape. Hokela lithapo tsa feme ka har'a thapo e kholo ea koloi.
MOHATO 20
Kenya hape grille ea polasetiki, kh'amera haeba e na le lisebelisoa 'me sekoaelo se tlositsoe Mohato oa 1, (Setšoantšo sa 1).
MOHATO 21
Beha Bumper sefahleho fatše ka pel'a koloi. Mefuta e nang le li-sensor, e hokela li-Wire Harness Extensions ho li-sensor tsa (2) tse ho Bumper, (Setšoantšo sa 22).
Meetso e nang le lisensara, plug Wire Harness Extensions (sheba Mohato oa 14) ho bumper ea fektheri ka har'a lisensara tse kentsoeng Bumper.
Ka thuso, beha Seboka sa Bumper ho fihlela ka ntle ho qetellong ea foreimi. E tšehetsa boima ba Bumper ka nakoana.
TLHOKOMELISO: Ho qoba kotsi kapa tšenyo e ka bang teng koloing, u se ke ua tsoela pele ho fihlela Bumper e tšehetsoa ka botlalo le ka mokhoa o sireletsehileng.TEMOSO! Se ke oa khasa ka tlas'a bumper ntle le haeba e tšehelitsoe hantle holim'a li-blocks kapa li-stand kapa bumper e ka oa.MOHATO 23
Beha li-slots (3) holima poleiti ea mokhanni/ka ho le letšehali ka morao ho Bumper ka Bracket ea Frame. Kenya (1) "T" Nut Plate ka morao ho Bracket ea Frame, (Setšoantšo sa 23). Hokela Bumper ho Bracket ea Frame le "T" Nut Plate e kenyellelitsoeng (3) 12mm Hex Bolts, (3) 12mm Lock Washers le (3) 12mm Flat Washers, (Setšoantšo sa 24).
Mokhanni/lehlakoreng le letšehali la Bumper e khomaretsoeng ho Bracket ea Frame (Hlokomela kemiso ea mabone a cube)
Pheta ho hokela mopalami/ lehlakore le letona.
MOHATO 25
Khetha mokhanni/Lepheo le ka tlase le letšehali. Hokela Lepheo qetellong ea Bumper ka (1) 8mm x 20mm Hex Bolt, (1) 8mm x 16mm Washer e Nyane ea Flat le (1) 8mm Flange Nut, (Setšoantšo sa 25 & 26). Hokela bokaholimo ba Lepheo ho ea botlaaseng ba bumper ea fektheri e kenyellelitsoeng (2) 6mm Button Head Combo Bolts le (2) 6mm Flange Nuts, (Setšoantšo sa 26). Pheta Mohato ona ho hokela mopalami/Lepheo le ka Tlase le letona ho Bumper.
c
(Setšoantšo sa 25) Hokela "Lepheo" la mokhanni/le letšehali qetellong ea Bumper le tlase ho bumper ea feme (metsu)
(Setšoantšo sa 26) Hokela "Lepheo" la mokhanni/le letšehali qetellong ea Bumper le tlase ho bumper ea feme. Ho kenya litšoantšo ho tloha ka morao ho bumper
(Setšoantšo sa 27) Ho kenya ka botlalo (20" Double Row Light Bar le mabone a mabeli a LED Cube ha a kenyelelitsoe)
MOHATO 26
Etsa tlhahlobo ea nako le nako ha u kenya ho etsa bonnete ba hore lisebelisoa tsohle li bolokehile ebile li tiile.
www.ironbisonauto.com Leqephe la 10 la 10 Tšen. 6/27/23 (JH)
Litokomane / Lisebelisoa
 |
IRONBISON IB-CCS1-03 Front Bumper [pdf] Tlhophiso Tataiso IB-CCS1-03, IB-CCS1-03 Bumper e ka Pele, Bumper e ka Pele, Bumper |
