Iron Logic Bukana ea Batsamaisi ba Nyeoe ea Z-5R
FEELAVIEW
Litaolo tsa Z-5R kapa Z-5R Case (liphetoho ka mokotla oa polasetiki) li sebelisoa ho Access Control Systems (ACS) e le lilaoli tse ikemetseng tse sebelisang linotlolo tsa motlakase le tsa motlakase, ha li hokahantsoe le sehokahanyi sa Dallas Touch Memory (sebali sa linotlolo tsa DS1990A), kapa sebali sa karete e haufi le motho ea se nang mabitso se etsisang protocol ea iButton (Dallas Touch Memory).
Lisebelisoa tse latelang li ka hokeloa ho molaoli oa Z-5R:
- Sebali sa karete e haufi ea kantle, se fetisang tlhahisoleseling ka protocol ea iButton, kapa sehokahanyi sa Dallas Touch Memory.
- Senotlolo sa electromagnetic kapa electromechanical;
- Konopo ea ho notlela (hangata e sa notleloa);
- LED ea kantle;
- Buzzer ea kantle;
- Sensor sa monyako.
LIEKETSENG TS'OANELO
- Protocol ea khokahano ea sebali sa kantle: iButton ( Dallas Touch Memory);
- Nomoro e kholo ea linotlolo: 1364;
- Tšehetso ea bohlokoa ea DS1996L: Ee;
- Sesupo sa audiovisual: LED le buzzer;
- Taolo ea kantle ea LED le buzzer: Ee;
- Output for lock: MIS transistor;
- Ho fetola hona joale: 5 A;
- Jumper bakeng sa khetho ea mofuta oa senotlolo: Ee, maemo a Electromechanical kapa electromagnetic;
- Notlela nako ea nako ea tokollo: 0…220 s (ea feme ea kamehla ke 3 s);
- Ts'ebetso ea phepelo ea motlakase voltage: 12 V DC;
- Boholo ba hajoale bo sebetsang: 45 mA;
- Boholo ba taba, mm: 65 x 65 x 20;
- Litekanyo tsa PCB, mm: 46 x 26 x 15;
- Nyeoe (bakeng sa Nyeoe ea Z-5R): Plastiki ea ABS;
Setšoantšo sa 1: Litekanyo tsa linyeoe tsa molaoli
Setšoantšo sa 2: Sebopeho sa PCB ea Molaoli
Lethathamo la 1. Tlhaloso ea li-terminals.
| Che | Theminale | Khethollo |
| 1 | ZUMM | Buzzer ea kantle. Sebelisa buzzer e nang le jenereithara e hahelletsoeng bakeng sa tšebeliso ea Vand e sa feteng 12 mA. Terminal e ntle ea Buzzer e hokahane le terminal ea +50 V, 'me e mpe ea buzzer ho terminal ena. |
| 2 | TM | Sebali sa kantle kapa sehokahanyi. |
| 3 | GND | Sebaka sa matšoao, ho hokahanya lithapo tse "tloaelehileng" tsa 'mali oa kantle, sekontiri, sensor ea monyako kapa konopo ea ho lokolla monyako. |
| 4 | ETSOA | Konopo ea ho lokolla monyako. E khutsufalitse ho lokolla monyako. Khokahano e sothehileng (TP) e khothalelitsoe. |
| 5 | LED | LED ea kantle. Sephetho sa hajoale se lekanyelitsoe ho 20 mA, ka hona LED e ka hokeloa ntle le lihanyetsi. Terminal e ntle ea LED e hokahane mona, le negativeone ea LED -ho terminal ea GND. |
| 6 | LEKOA | Terminal ho hokela negative wireof coil lock |
| 7 | +12V | +12 V;ho hokela theminale e nepahetseng ea phepelo ea motlakase, kapa terata e positi ea khoele ea senotlolo. |
| 8 | GND | Sebaka sa motlakase, ho hokela terminal e mpe ea phepelo ea motlakase |
| 9 | MONYAKO | Sensa ya monyako e hokela mona.Ho kgothaletswa kgokelo e sothehileng ya para (TP). Sensor e hlahisoa ke lemati le bulehileng. Sena se lumella ho tima molumo ho molaoli pejana, le ho boloka matla, ka ho tima senotlolo sa motlakase ka mor'a hore lemati le bulehe, kapa ka ho bula senotlolo sa motlakase ha feela lemati le koetsoe. |
Thapo e sothehileng (mohlala, UTP CAT5) e lokela ho sebelisoa ho hokahanya sebali kapa senotlolo ho molaoli, ho qoba tšitiso.
Ha o hoketsoe ka protocol ea iButton (Dallas Touch Memory), terata e le 'ngoe ea para e sothehileng e sebelisoa ho hokela liteishene tsa GND tsa 'mali le molaoli. Mohala oa bobeli oa para ena e sothehileng o sebelisetsoa ho fetisa matšoao, 'me o kopanya tlhahiso ea' mali le TM terminal ho molaoli (sheba setšoantšo sa 4 le sa 5).
Matla ho 'mali a ka tsamaisoa ho sebelisoa mohala o le mong. Haeba lithapo tse sa sebelisoeng li ntse li le ka har'a thapo, li hokahanye lipakeng tsa li-terminals tsa GND ho 'mali le molaoli.
LIEKETSENG LIEKETSENG
Molaoli a ka sebetsa ka bobeli ka linotlolo tsa DS1990A, hammoho le likarete tse se nang mabitso kapa li-tokens tsa maemo a fapaneng. Ho sebetsa ka linotlolo tsa DS1990A, hokela sehokelo ho molaoli. Ho sebetsa le likarete, hokela 'mali ea tšehetsang protocol ea karete e lumellanang (EM-Marine, Mifare joalo-joalo) Babali ba karete ba lokela ho sebelisa protocol ea iButton ho fetisetsa likhoutu ho molaoli, ho etsisa linotlolo tsa DS1990A.
Hobane litsamaiso tse se nang mabitso li se li batla li nkile sebaka sa likhokahano tse sebelisoang, ka morao ho mona re tla hlalosa ts'ebetso ea molaoli ho example ea 'mali oa Matrix II o hokahaneng ka iButton (Dallas Touch Memory), e batlang e tšoana le ts'ebetso ea khokahanyo ka 100%.
- Liketso tsa ACS li khethoa ho tloha ho ba teng kapa ho ba sieo ha karete ea ID le boemo ba karete mohopolong oa molaoli. "Card ID" hangata e bitsoa "key", kahoo tokomaneng ena re tla sheba "karete" le "key" mantsoe a lekanang (mohlala, re ka re "tšoara ka karete" kapa "tšoara ka senotlolo" ka mokhoa o tšoanang. phello). Lethathamo le felletseng la likarete (linotlolo) tse nang le boemo ba tsona, tse bolokiloeng mohopolong oa molaoli, le bitsoa database ea ACS.
- Ho sebetsa le molaoli oa Z-5R, karete e 'ngoe le e' ngoe e ncha e haufi e lokela ho fuoa "boemo" (litokelo tsa phihlello). Boemo bo khethoa nakong ea lenaneo la karete, ka mokhoa oa pele oa karete ho ea ho 'mali ea amanang le molaoli. Ka hona, ho fetola boemo ba karete, e tlose mohopolong oa molaoli, ebe o e eketsa hape ka boemo bo nepahetseng. Ka kopo hlokomela hore ho hlakola karete ea Master, memori eohle ea controller (ACS Database) e tlameha ho hlakoloa kapa e ngoloe bocha.
- Boemo ba karete bo ka ba ka tsela e latelang:
- Master card e sebelisetsoa lenaneo la Z-5R feela; ha e sebelisoe ho fihlella.
- Karete e tlwaelehileng (Access) e sebediswa bakeng sa ho feta sebakeng sa phihlello (ntle le ha o le Mokgweng wa Thibelo).
- Karete e thibelang e sebelisoa bakeng sa ho feta sebakeng sa phihlello (ho kenyeletsoa ha o le Mokhoeng oa Thibelo), le ho nolofaletsa/ho tima Mokhoa oa Thibelo.
Hlokomela: Likarete tsa Thibelo li bula senotlolo ha karete e tlosoa ho 'mali. Taolo e ncha ea Z-5R e na le mohopolo o se nang letho. Ho sebelisa Z-5R, boloka pele tlhahisoleseling ea karete ea Master mohopolong oa eona. Karete ena ea Master e tla sebelisoa ho etsa mananeo a sesebelisoa. Hamorao re tla hlalosa mokhoa oa ho ngola Master card.
Mekhoa ea ho sebetsa ea ACS e nang le Z-5R:
- Mokhoa o tloaelehileng oa ho fihlella o fanoe bakeng sa likarete tsa Tlwaelo le tse Thibelang.
- Mokhoa oa ho thibela mokhoa o fanoang feela bakeng sa likarete tsa Thibelo, empa eseng bakeng sa likarete tse Tloaelehileng. E loketse ha phihlello e hloka ho behelloa ka nakoana feela sehlopheng se itseng sa batho.
- Accept Mode access e fanoe bakeng sa likarete tse seng li ntse li le teng tsa Tloaelehileng le Thibelo, hammoho le likarete life kapa life tse ncha. Likarete tsohle tse ncha tse sebelisoang mokhoeng ona li tla bolokoa mohopolong oa molaoli, 'me li fuoe boemo bo tloaelehileng ba karete. Kahoo ka mor'a nako e itseng e sebelisitsoeng ho sebetsa ka mokhoa ona, molaoli o tla be a hahile database e ncha ea ACS.
- Trigger Mode e etsisa mokhoa o bonolo oa ts'ebetso ea senotlolo. Ho ama karete ka 'ngoe ho fetola boemo ba senotlolo sa motlakase, ka hona, boemo ba senotlolo. Ho koala senotlolo sa matla ho hlahisa beep e le 'ngoe e khutšoanyane, le ho e bula, li-beeps tse 'nè tse khutšoanyane. Mokhoa ona hangata o sebelisoa ka liloko tsa motlakase, empa lisebelisoa tse ling le tsona li ka sebelisoa le eona. Leha ho le joalo, ka kopo hopola hore lisebelisoa tsa ho notlela tse sa etsetsoang nako e telele ea ts'ebetso, joalo ka linotlolo tsa electromechanical, li ka hloleha ha li sebetsa ka mokhoa ona.
Mefuta e bonolo ea tharollo ea ACS ea monyako o le mong:
A. Ho kena likarete tsa EM-Marine, konopo ea ho tsoa monyako:
- Ha o kena: 'Mali oa Matrix II.
- Ha o tsoa: Konopo ea ho lokolla lemati + phepelo ea motlakase + (senotlolo sa motlakase KAPA senotlolo sa motlakase / latch).
B. Ho kena le ho tsoa likarete tsa EM-Marine. Sebali sa kamore e ka hare se sebelisetsoang ho tsoa le sebali sa kantle se sebelisetsoang ho kena, se hokahantsoe ka ho bapa le terminal e le 'ngoe. Konopo ea ho lokolla monyako ha e hlokehe.
Letšoao la molumo le pono ho molaoli:
Ha karete e ama 'mali e hokahaneng le molaoli, e ka ba:
- E teng ho database ea taolo ea Z-5R. LED e tala ea panya, molumo oa buzzer, senotlolo se lokolloa bakeng sa nako e boletsoeng ea senotlolo (kapa ho fihlela sensor ea monyako e qala).
- Ha e eo ho database ea taolo ea Z-5R. LED e tala e benya habeli, 'me ho ntšoa li-beep tse peli.
TS'ELISO
Bohlokoa: Pele o etsa mananeo a molaoli, ka kopo etsa bonnete ba hore sebali sa khokahanyo kapa sebali sa iButton (Dallas Touch Memory) se hokahane.
Ha re hlalosa mekhoa ea mananeo, re tla sebelisa lentsoe "card touch to the reader". Ho bolela ho atamela 'mali ea hokahaneng le molaoli enoa ka karete, ho ea bohōle bo tla etsa bonnete ba ho fumana karete ea ID ea karete (ka tlase ho 2 cm). Matlafatso ea taolo ea pele (ha ho na linotlolo ho database ea taolo).
Li-beeps tse khutšoane li letsoa bakeng sa 16 s, e leng se bontšang hore memori ea controller ha e na letho 'me Add Key Key mode ea sebetsa.
Ha li-beep li ntse li lla, ama 'mali ka karete. Sena se tla boloka nomoro ea karete e le Master card (Master key). Li-beeps tse khuts'oane li emisa ho lla, ka hona, ho netefatsa tlhahiso e atlehileng ea karete ea Master ea pele.
Ho eketsa likarete tsa Master tse ling, lula u li ama khahlano le 'mali ka linako tse ka tlase ho 16 s. Taba e 'ngoe le e 'ngoe e tla tiisoa ke beep e khutšoanyane. Mokhoa oa Add Master Card o tsoa ka bohona ka mor'a metsotsoana e 16 ka mor'a ho ts'oaroa ha ho qetela, o tiisitsoe ke letoto la li-beeps tse 'ne tse khutšoane. Nakong ea ts'ebetso e latelang, likarete tsa Master li sebelisoa bakeng sa mananeo.
Haeba ho se likarete tse bolokiloeng, pheta mokhoa oa pele oa ho matlafatsa matla. Ha database ea taolo e se na letho (ke hore, ha ho na likarete tse tloaelehileng, tse thibelang kapa tsa Master), matla-up e tla kenya tšebetsong ka bo eona.
Mokhoa oa Master Card.
Haeba likarete tsa Master li lahlehile, Master card e ncha e ka bolokoa feela ka mor'a ho hlakola memori eohle ea molaoli, ho lahleheloa ke database e teng. Leha ho le joalo, hoa khoneha ho boloka "backup" ebe u khutlisetsa mohopolo oa "controller" ka ho sebelisa adaptara ea Z-2 Base le software ea mahala ea BaseZ5R (e fumanehang ho http://www.ironlogic.me).
Lintlha tse tloaelehileng mabapi le mananeo.
Ho kenya molaoli ka har'a mokhoa o lakatsehang oa ho etsa mananeo, sebelisa nako e khuts'oane (<1 s) le e telele (~6 s) likarete tsa Master tsa 'mali tse amanang le molaoli. Mokhoa oa ho etsa mananeo o na le nako ea ho tsoa (~ 16 s) bakeng sa liketso leha e le life; ha nako ena e feta, molaoli o tla khutlela ho mokhoa o tloaelehileng oa ts'ebetso, ho amohela letoto la li-beeps tse 'nè tse khutšoanyane.
Mokhoa oa 1. Kenya Karete e Tloaelehileng le e Thibelang (1M)
Thetsa 'me u tšoare (tšoara nako e telele) sebali ka senotlolo sa Master. Ha a ama, molaoli o ntša beep e khuts'oane, e amohelang tlhokomeliso ea karete ea Master, 'me ka metsotsoana e 6, lets'oao le leng hape, le bolelang ts'ebetso ea mokhoa oa Add Normal le Blocking Cards. Tlosa Master card hona joale. Ho eketsa likarete tse ncha, tsoela pele ho ama 'mali ka tsona, u siee metsotso e fetang 16 pakeng tsa ho thetsoa. Karete e 'ngoe le e 'ngoe e ncha ea karete e amoheloa ke beep e khuts'oane, e netefatsang ho boloka nomoro ea karete mohopolong oa taolo le ho beha boemo ba karete ho Tloaelehileng. Haeba karete e ntse e tšoaretsoe 'mali bakeng sa ~ 9 s ho feta, molumo o molelele oa beep mme boemo ba karete bo fetoha Thibelo. Haeba karete e se e ntse e le teng mohopolong oa molaoli, li-beep tse peli tse khutšoane li tla lla.
Mokhoa oa Add Normal le Blocking Cards o fela ka bohona ka mor'a metsotsoana e 16 ka mor'a ho ama la ho qetela, kapa ka Master card touch. Molaoli o tiisa ho tsoa ka letoto la li-beeps tse 'nè tse khutšoanyane.
Mokhoa oa 2. Kenya Master Cards (1m, 1M)
Thetsa 'mali hang ka Master card (short touch). Ha a ama, molaoli o ntša molumo o mokhuts'oane, o amohelang tlhokomeliso ea karete ea Master. Ka mor'a metsotsoana e 6, ama 'me u tšoare Master card ho 'mali (ts'ebetso e telele). Ha a ama moo, molaoli o ntša li-beep tse peli tse khutšoane, a amohela ho ts'oaroa ha karete ea Master ea bobeli, 'me ka metsotsoana e 6 e le 'ngoe hape e amohelang hore molaoli o se a le ho Add Master Card mode. Tlosa Master card hona joale.
Ho eketsa likarete tse ling tsa Master, tsoela pele ho ama 'mali ka likarete tse ncha, u siea metsotso e fetang 16 pakeng tsa ho thetsa. Mookameli o tla netefatsa ho ama karete e 'ngoe le e' ngoe e ncha ka beep e khutšoanyane. Haeba karete e se e bolokiloe memoring e le Master card, ha ho matshwao a hlahang.
Mokhoa oa Add Master Cards o iphelela ka bohona ka mor'a metsotsoana e 16 ka mor'a ho thetsoa la ho qetela. Molaoli o tiisa ho tsoa ka letoto la li-beeps tse 'nè tse khutšoanyane.
Letlapa la 2. Mekhoa ea ho etsa mananeo
| Mekhoa | Tshebetso | Tšōmo |
| Lenaneo le sebelisa linotlolo tsa Master | 1…5 - # ea ho thetsoa* Tlhaku e kholo -Tšoara nako e telele (tšoara senotlolo bakeng sa ~ 6 s)* Tlhaku e nyane -Tlhaka e khuts'oane (tšoara senotlolo bakeng sa <1 s)M – Senotlolo sa Master N – Tloaelehileng senotlolo B – Ho thibela senotlolo SE KE UA beha jumper boemong bofe kapa bofe bo sa boleloang mona: Kotsi ea ho senya sesebelisoa! | |
| 1. Eketsa likarete tse tloaelehileng le tse thibelang | 1M | |
| 2. Eketsa Master Cards | 1m, 1m | |
| 3. Hlakola Single Normal le BlockingCards | 2m, 1m | |
| 4. Hlakola Mehopolo Tsohle | 3m, 1m | |
| 5. Beha Nako ea Tokollo ea Monyako | 4m | |
| 6. Ho thibela Mokhoa | 1B | |
| 7. Amohela Mokhoa | 5m | |
| 8. StoringController Memory to DS1996L Key | 1m, 1m | |
| 9. LoadingInformation ho tloha ho DS1996L Key ho kena ho Memori ea Molaoli | Boemo ba pele ba ho eketsa matla | |
| Lenaneo le sebelisa li-Jumpers | ||
| 1. Electromechanical Lock | Boemo 1 | |
| 2. Hlakola Mehopolo Tsohle | Boemo 2 | |
| 3. Kenya Linotlolo tse Tloaelehileng ntle le MasterCard | Boemo 3 | |
| 4. Motlakase Lock | Boemo 4 | |
| 5. Mokhoa oa ho qala | Boemo 5 | |
Mokhoa oa 3. Hlakola likarete tse tloahelehileng le tse thibelang ka Master Card (2m, 1M)
Thetsa 'mali habeli ka karete ea Master (lits'oants'o tse khutšoane). Ha a theoa lekhetlo la pele, molaoli o ntša beep e khuts'oane, e amohelang tlhokomeliso ea karete ea Master. Ha a ts'oaroa ka lekhetlo la bobeli, molaoli o ntša li-beep tse peli tse khutšoane, ho amohela ho ts'oaroa ha karete ea bobeli ea Master ka mokhoa oa ho etsa mananeo. Ka mor'a metsotsoana e 6, ama 'me u tšoare Master card ho 'mali (ts'ebetso e telele). Ka lekhetlo la boraro, molaoli o ntša li-beep tse tharo tse khutšoanyane, 'me ka mor'a metsotso e 6 e le 'ngoe hape e lumela hore molaoli o se a le ka mokhoa oa Erase Single Cards. Tlosa Master card hona joale. Ho hlakola likarete tse Tloaelehileng le tse Thibelang, lula u thehile 'mali ka tsona, u siee metsotso e fetang 16 lipakeng tsa ho thetsoa. Karete e 'ngoe le e' ngoe e nyatsehang e amoheloa ka molumo o khuts'oane; haeba karete eo e le sieo mohopolong, ka li-beeps tse peli tse khutšoane.
Mokhoa oa Erase Single Cards o fela ka bohona ka mor'a metsotsoana e 16 ka mor'a ho ama la ho qetela, kapa ka Master card touch. Molaoli o tiisa ho tsoa ka letoto la li-beeps tse 'nè tse khutšoanyane.
Mokhoa oa 4. Hlakola Memori Tsohle ka Master Card (3m, 1M)
Thetsa 'mali ka makhetlo a 3 ka Master card (lits'oants'o tse khutšoane). Ha a theoa lekhetlo la pele, molaoli o ntša beep e khuts'oane, e amohelang tlhokomeliso ea karete ea Master. Ha a ts'oaroa ka lekhetlo la bobeli, molaoli o ntša li-beep tse peli tse khutšoane, ho amohela ho ts'oaroa ha karete ea bobeli ea Master ka mokhoa oa ho etsa mananeo. Ha motho a thetsoa ka lekhetlo la boraro, molaoli o ntša li-beeps tse tharo tse khuts'oane, ho amohela "Master card touch" ea boraro. Ka mor'a metsotsoana e 6, ama 'me u tšoare Master card ho 'mali (ts'ebetso e telele). Ka lekhetlo la bone, molaoli o ntša li-beeps tse 'nè tse khutšoanyane,' me ka mor'a 6 sa letoto la li-beeps tse khutšoanyane, ho lumela hore mohopolo oa taolo o hlakotsoe le mokhoa oa ho etsa mananeo o felile. Tlosa Master card hona joale. Ka matla-up e latelang, molaoli o tla kenya mokhoa oa ho etsa lenaneo ka bohona.
Hlokomela: Ha database eohle e hlakoloa ka Master card, Nako ea Lock Release e hlophisitsoeng ha e etsoe bocha.
Mokhoa oa 5. Lock Release Time Programming (4m)
Thetsa 'mali makhetlo a 4 ka Master card. Ho e 'ngoe le e' ngoe ea ho ama, molaoli o ntša li-beeps ho amohela kananelo ea karete ea Master; bongata ba tsona bo tsamaellana le palo ya ho thetsa. Kahoo ka lekhetlo la bone, molaoli o ntša li-beeps tse 'nè tse khutšoanyane ebe o kenya mokhoa oa Lock Release Time Programming. Ka mor'a metsotsoana e 6 ho tloha ha u tobetsa ho qetela, tobetsa 'me u tšoare konopo ea ho lokolla senotlolo bakeng sa nako e hlokahalang ho boloka senotlolo se butsoe. Ka mor'a hore konopo e lokolloe, molaoli o ntša letoto la li-beeps tse khutšoanyane, o boloka nako ea ho hopola le ho tsoa ka mokhoa oa lenaneo. Mokhoa oa 6. Mokhoa oa ho thibela (1B)
Ho Thibelo Mode, phihlello e fuoa likarete tsa Thibelo feela, 'me e haneloa ka likarete tse Tloaelehileng. Mokhoa oa ho thibela o hlophisitsoe ke likarete tsa Thibelo (sheba Mokhoa oa 1 bakeng sa ho eketsa likarete tsa Thibelo). Karete e thibelang e sebelisoa:
- Joalo ka karete e Tloaelehileng ts'ebetsong e tloaelehileng (moo phihlello e fanoang ho likarete tsohle tse Tloaelehileng le Thibelo tse bolokiloeng mohopolong oa taolo).
- Ho kenya Mokhoa oa ho Thibela (moo phihlello e fuoang likarete tsa Thibelo feela).
- Ho tima Blocking Mode le ho kgutlela tshebetsong e tlwaelehileng.
Molaoli o bula senotlolo ha karete ea Blocking e tlosoa ho 'mali. Ho kenya Mokhoa oa ho Thibela ho selaoli, tšoara karete ea Thibelo ho 'mali bakeng sa ~s 3s ho fihlela lerata le lelelele le sa khaotseng, o amohela ho kenya tšebetsong Mokhoa oa Thibelo. Boemong bona, ho leka ho fihlella ka karete ea Tloaelehileng ho hloleha, 'me letoto la li-beeps tse khutšoane li hlahisoa. Ho tlohela Mokhoa oa ho thibela 'me u kene ts'ebetsong e tloaelehileng, ebang ke 1) ama 'me u tšoare karete ea Thibelo haufi le 'mali (tatellano e ts'oanang le ts'ebetso ea Mokhoa oa ho thibela), ho fihlela letoto la li-beeps tse khutšoane li lla; kapa 2) tšoara 'mali ka Master card kapele, ho fihlela letoto la melumo e mekhutšoane e lla.
Hlokomela: Haeba matla a phepelo a hloleha nakong ea Mokhoa oa Thibelo o kentsoeng, o tla lula o sebetsa ka mor'a hore motlakase o khutle.
Mokhoa oa 7. Mokhoa oa ho Amohela (5m).
Mokhoa oa ho Amohela o sebelisoa ho boloka likarete tsohle tse atamelang 'mali mohopolong oa taolo, ha o ntse o li fa maemo a Tloaelehileng. Ka mokhoa ona, karete e atamelang 'mali e bula lemati mme ka nako e ts'oanang e bolokoe mohopolong oa taolo joalo ka karete e tloaelehileng. Mokhoa ona o sebelisoa ho khutlisa database ea basebelisi ntle le ho bokella likarete ho tsoa ho basebelisi. Ho hlokahala karete ea Master ho kenya tšebetsong mokhoa ona.
Thetsa 'mali makhetlo a 5 ka Master card. Ho ama ka 'ngoe ho tsamaisana le li-beeps tse khutšoane tse amohelang ho ama; palo ea li-bips e lekana le nomoro ea ho ama. Kahoo ka lekhetlo la bohlano, molaoli o ntša li-beeps tse hlano tse khutšoanyane, ebe ka 6 s, beep e le 'ngoe e telele, e amohelang ts'ebetso ea Amohela Mode.
Ho tloha Moemong oa Amohela, ama 'mali ka Master card; letoto la li-beeps tse khutšoane li tla amohela mokhoa oa ho tsoa.
Hlokomela: Haeba matla a phepelo a hloleha nakong ya Mokgwa wa Amohela o kentswe tshebetsong, e tla dula e sebetsa ka mora hore motlakase o kgutle.
Mokhoa oa 8. Ho boloka Memori ea Taolo ho Senotlolo sa DS1996L (1m, 1M)
Ho bala memori ea taolo le ho e boloka ka har'a senotlolo sa DS1996L, konopo ea iButton (Dallas Touch Memory) e hloka ho hokeloa ho 'mali (sheba setšoantšo sa 5). Pele, memori ea senotlolo ea DS1996L e tlameha ho hlakoloa le ho qalisoa ke software ea BaseZ5R. Joale kenya tšebetsong mokhoa oa Add Master Card, ka Master card. (Sheba Mokhoa oa 2 bakeng sa tlhaloso). Bakeng sa seo, ama 'mali ka karete eo ea Master (short touch). Ha a ama, molaoli o ntša beep e khuts'oane, e amohelang Master card touch. Ka mor'a metsotsoana e 6, ama 'me u tšoare Master card ho 'mali (ts'ebetso e telele). Tabeng ena, molaoli o ntša li-beep tse peli tse khutšoane, ho amohela ho ts'oaroa ha karete ea bobeli ea Master card, ebe molumo o bolelang ho kenya tšebetsong mokhoa oa Add Master Card ho molaoli. Joale ama sehokelo ka senotlolo sa DS1996L 'me u se tšoare ho fihlela letoto la melumo e mekhutšoanyane ea melumo. Seo se ka kopitsa lintlha tsohle tsa linotlolo tse bolokiloeng (sebaka sa polokelo ea litaba) ho tloha ho molaoli ho ea konopo ea DS1996L. Hona joale, ka ho sebelisa Z-2 Computer Adapter (Z-2 Base kapa Z-2 EHR), hoa khoneha ho tsoela pele ho kopitsa boitsebiso bona ho tloha konopo ea DS1996L ho ea khomphuteng.
Mokhoa oa 9. Ho kenya Boitsebiso ho tsoa ho Senotlolo sa DS1996L ho Memori ea Molaoli.
Ho kenya tlhahisoleseling ho tsoa ho senotlolo sa DS1996L mohopolong oa molaoli oa Z-5R, konopo ea konopo ea iButton (Dallas Touch Memory) e hloka ho hokela 'mali (sheba setšoantšo sa 5). Sebaka sa polokelo ea boitsebiso se tlameha ho ba se se se ntse se le teng ka har'a senotlolo sa DS1996L, ebang e kile ea baloa ho tsoa mohopolong oa molaoli, kapa e kentse software ea BaseZ5R. Pele, ka kopo hlakola mohopolo oa molaoli (ka Master card kapa ka jumper). Ebe o potoloha matla a taolo (e tima ebe o e bulela). Boemo ba pele ba ho eketsa matla bo tla sebetsa. Thetsa 'me u tšoare DS1996L ho sehokelo. Ha tlhahisoleseling e kopitsoa ho tsoa ho DS1996L ho ea mohopolong oa taolo, letoto la li-beeps tse khutšoane li tla utloahala. Ha ho nke ho feta 25 s ho kopitsa palo e kholo ea linotlolo (1364) ho molaoli.
SEBELISA LITS'I
Jumper e le 'ngoe e tla le molaoli e mong le e mong oa Z-5R bakeng sa lenaneo.Ho na le libaka tse hlano tsa jumper tse nepahetseng (sheba setšoantšo sa 3).
Boemo #1 Electromechanical lock e khethiloe (ha senotlolo se koetsoe, voltage tima).
Boemo #2, CLR (Ho hlakile) ho hlakola mohopolo oa taolo. Bakeng sa seo, tima molaoli, beha jumper sebakeng sena 'me u e sebelise. Ha ntho e 'ngoe le e' ngoe e hlakotsoe, ho utloahala letoto la li-beeps tse khutšoane. Likonopo tsohle lia hlakoloa 'me sebali sa nako ea ho lokolloa ha mamati se hlophisoa bocha hore se be boemong ba feme (3 s).
Boemo #3, ADD (Keketso) ho kenya likarete tse Tloaelehileng le tse Thibelang mohopolong oa taolo ntle le ho sebelisa Master card. Bakeng sa seo, tima molaoli, beha jumper sebakeng sena 'me u e tsose hape. Ka mor'a hore lets'oao le ntše, molaoli o ho Add Normal and Blocking Cards Mode, ntle le Master cards: ho ts'oara nako e khutšoanyane ho eketsa karete e tloaelehileng, le ho tšoara nako e telele ho thibela karete. Ka mor'a 16 s ho tloha ha karete ea ho qetela e ama molaoli o tlohela Mokhoa oa Add Normal le Blocking Cards (letoto la li-beeps tse khutšoanyane li hlahisoa).
Boemo #4 kapa No jumper Electromagnetic lock e khethiloeng (ha senotlolo se koetsoe, voltage teng). Haeba ho se na jumper e teng, e na le phello e ts'oanang le ha jumper e kentsoe Boemong ba #4, ke hore, ho khethoa senotlolo sa motlakase.
Bohlokoa: Senotlolo sa motlakase se notleloa feela ka mor'a hore motlakase ofe kapa ofe o khaotse ho khola ea oona, 'me tieho ea ho lokolloa ha lemati e itšetlehile ka hore na hona joale ho fokotseha kapele hakae. Ho fokotsa ho itšetleha hona, molaoli o fanoa ka potoloho ea hona joale ea ho choking, e fetolang matla a "extraneous" ka har'a coil ea eona ho futhumatsa, kahoo e fokotsa haholo nako ea ho lokolloa ha senotlolo. Leha ho le joalo, potoloho ena e na le bokhoni bo fokolang mme haeba sephethephethe sa phihlello se kaholimo ho 25 ka metsotso e 5, se ka futhumala. Ho sireletsa potoloho ea hona joale ea ho khangoa bakeng sa libaka tse joalo tsa phihlello, kenya shunt diode e bapileng le coil ea senotlolo. Sena, ka lehlakoreng le leng, se ka eketsa nako ea ho bula senotlolo sa motlakase ka 1…3 s, ha se bapisoa le potoloho ea hona joale ea ho bipetsa. Haeba keketseho e joalo e ke ke ea mamelloa, kenya varistor ka tatellano le diode, e nang le voltage ≤ 14 V le ho senya matla ≥ 0.7 Joule (e kang V8ZA2P, bona setšoantšo sa 6).
Boemo #5, Mokhoa oa Trigger o sebetsa bakeng sa linotlolo tsa motlakase feela: tima selaoli, beha jumper sebakeng sena 'me u e bulele. Ka mokhoa ona, molaoli a ka ba boemong bo bong ba tse peli: E koetsoe (voltage fane ka senotlolo), le Open (ha ho voltage fane ka senotlolo). Ho fetola lipakeng tsa maemo ana, ama 'mali ka karete ea Tloaelehileng kapa Thibelo e seng e ntse e le teng mohopolong oa taolo (database).
Lets'oao la molumo oa taolo bakeng sa ho fetola maemo:
- Bula ho Koetsoe beep e 1 e khuts'oane,
- E koetsoe ho Bula li-beep tse 4 tse khutšoane.
Senotlolo se laoloang se lokela ho hokela ho LOCK le +12V terminals. Bohlokoa: Sokete eohle ea jumper e ka sebelisoa ho hokahanya molaoli ho PC ka Z-2 Base Computer Adapter le software ea mahala ea BaseZ5R (e fumanehang bakeng sa ho jarolleloa ho http://www.ironlogic.me).
Setšoantšo sa 3. Maemo a jumper
PHAHAMA LE KHOPOTSO
Ho kenya molaoli oa Z-5R Case, etsa mehato e latelang:
- Qhala nyeoe.
- Tšoaea 'me u phunye likoti tse ntseng li kenngoa bakeng sa mokotla (ho ea ka setšoantšo sa 1)
- Hokela lisebelisoa tsa kantle ho li-terminals ho latela sebopeho sa khokahano.
- Kenya diode e sireletsang (bona setšoantšo sa 6). Haeba senotlolo ke electromechanical, ka kopo beha jumper ho boemo ba 1. (Sheba setšoantšo sa 3).
- Ha motlakase o fanoe, molaoli o tla fetohela mokhoeng oa ho etsa mananeo (Likarete tsa Pele tsa Power-up Writing Master bona Khaolo ea 4).
- Kenya molaoli ka har'a mokotla, beha sekoahelo ebe o phurufaletsa sesebelisoa.
Setšoantšo sa 4. Ho hokahanya 'mali oa kantle.
Setšoantšo sa 5. Ho kopanya probe.
Setšoantšo sa 6. Ho hokahanya lisebelisoa tsa ka ntle.
PEKETSI MATS'ELI
- Z-5R kapa Z-5R Case Controller: 1
- Jumper: 1
- Taba (bakeng sa mohlala oa Z-5R feela): 1
TS'EBETSO MAEMO
Thempereichara ea tikoloho: 30…40°C.
Mongobo: ≤ 98% ho 25°C
Ha o sebetsa tlas'a maemo a sa khothaletsoang, lisebelisoa tsa lisebelisoa li ka kheloha ho litekanyetso tse boletsoeng.
Sesebelisoa se tlameha ho sebetsoa ho se na: pula, khanya ea letsatsi, lehlabathe, lerōle, le mongobo.
TIISETSO MOEKETSI
Sesebelisoa sena se koaheloa ke waranti e lekanyelitsoeng bakeng sa likhoeli tse 24 ho tloha ka letsatsi la thekiso.
Warranty e fetoha lefeela haeba:
- Bukana ena ha e lateloe;
- Sesebelisoa se na le tšenyo ea 'mele;
- Sesebelisoa se na le mekhoa e bonahalang ea ho pepesehela mongobo le lik'hemik'hale tse mabifi;
- Lipotoloho tsa lisebelisoa li na le mesaletsa e bonahalang ea ho ba tampe entsoeng ke mekga e sa dumellwang. Tlas'a tiisetso e sebetsang, Moetsi o tla lokisa sesebelisoa kapa a nkele likarolo tse robehileng, MAHALA, haeba phoso e bakoa ke bothata ba tlhahiso.
Litokomane / Lisebelisoa
 |
Li-Case Controllers tsa Iron Logic Z-5R [pdf] Bukana ea Mosebelisi Z-5R, Batsamaisi ba Nyeoe ba Z-5R, Batsamaisi ba Nyeoe, Batsamaisi |
