ERP Programming Software
Lintlha tsa Phatlalatso ea Sesebelisoa sa Configuration ea Mokhanni

ERP Programming Software Driver Configuration Tool

Mofuta oa 2.1.1 (19 Mphalane 2022)

1. Litlhophiso tsa kamehla tse ntlafalitsoeng.
2. E kentse libuka tsa mosebelisi foldareng ea litokomane.
3. E kentse khalemelo ho bakhanni ba bang ho lokisa boitšoaro ba ho kheloha.
4. Cheke e kenyellelitsoeng bakeng sa loop e koetsoeng le loop e bulehileng PKB/PKM. E tla lokisa ka bo eona li-loop kapa li-driver tse koetsoeng tse hlophisitsoeng ka li-setting tsa loop e fapaneng.
5. Config matching e tla sebelisa nomoro ea 'nete ea mohlala ntle le li-suffixes tsa feme e patiloeng feela, kapa nomoro ea mohlala e hlahang. Sena se thibela lotho hore e se ke ea ema haeba mokhanni oa "-A" kapa "-DN" a hokahane.
6. Ha ho barcode e teng kapa e sa sebetseng ea barcode eo u ka kopanang le eona nakong ea lot config mode e seng e tla eketsa lotho config counter, empa e ntse e fana ka temoso.
7. Ha ho na barcode e teng hona joale kapa e sa sebetseng ea barcode e teng hona joale e thathamisa sephetho sa lenaneo e le "Temoso" lethathamong la litlhophiso tsa lotho, ho fapana le "Phoso."
8. Lot config model combo box e bapisang e ka sebelisa nomoro ea mohlala e bonts'itsoeng, kapa nomoro e felletseng ea mohlala ho tsamaisana. Boiteko ba ho bapisa nomoro ea mohlala e bontšitsoeng pele.
9. E kentse tšehetso e nepahetseng bakeng sa bootloader ea STM32L16x.
10. E tlositse fensetere ea popup ea bootloader e fosahetseng, e laela yuniti ka mokhoa o fosahetseng ho potlakisa yuniti e ntseng e nchafatsoa.

Mofuta 2.0.9 (14 Mots'eanong 2021)

1. E kenyellelitse lenaneo la NTC bakeng sa letoto la PKM.
2. Lintlha tse tsitsitseng tsa menyu ea litlhophiso tsa NTC ha ho fifala ho ka lokisehang le mokhanni oa NTC ea lokisehang o hoketsoe.
3. E kentse konopo ea toggle ho fetola lipakeng viewka setsebi sa NTCfile graph le dimmer profile kerafo.
4. Ts'ehetso e ekelitsoeng bakeng sa liapdeite tse kholo tsa memori ea flash FW.
5. Sekala se tsitsitseng sa DPI bakeng sa kerafo ea TRIAC, 0-10 V le NTC views.
6. Kerafo e sa fetoheng ea dimmer e amang sebaka sa 0,0 sa tšimoloho leha dim to off e koetsoe.

Mofuta oa 2.0.8 (09 Mphalane 2020)

1. E kenyelelitsoe ho lumellana le PTB/PKB/PKM.
2. Mongolo oa Sidebar hona joale o ka khethoa ke toeba ho kopitsa tlhahisoleseling habonolo.
3. E kentsoe mongolo oa printa ea liqoaha haeba mongolo o feta bophara ba sebaka.
4. Ntlafatsa ts'ebetso ea Unit Firmware joale e ka sebelisa litsela tsa marang-rang.
5. E kenyelitsoe ka mebala e nang le mebala ea TRIAC/ELV bakeng sa li-angles tse kholo le tse nyane tsa conduction bakeng sa ho hlaka ha pono.
6.  E kentse tokiso ea auto bakeng sa PKB/PKM/PTB e hlophisitsoeng ka litokiso tsa pejana tsa GUI.
7. Bokhoni bo ekelitsoeng ba ho hlalosa 'mala oa theme le setšoantšo sa banner ka mongolo file, CustomerColors.txt.
8. E kentse litlhaku tsa Windows tse seng molaong, hlahloba ho kena file moloko oa mabitso.
9. Litokiso tse fapaneng tsa liphoso le ntlafatso ea botsitso

Mofuta oa 2.0.7 (15 Pherekhong 2020)

1. E kenyellelitse ho lumellana ha VZM, voltage ho mV, eseng li-volts kaofela.
2. Tšireletso e ekelitsoeng ea password bakeng sa mokhoa oa moralo.
3. Taba e tsitsitseng moo mefuta ea DAL le CNB-SIL e ke keng ea sebetsa hantle.
4. Ho hlakolwa ho tsitsitseng ha linomoro tse peli tsa ho qetela khoeleng ea FW.
5. Taba e tsitsitseng moo 0-10 V setpoint min values ​​tse ka tlase ho 0.7 V li neng li ke ke tsa hlaha ka nepo.
6. Fetolela min dim ho tima hysteresis ho 0.01 V.
7. Fetola boholo ba mehato ea dimmer ho 0.01 V.
8. Fetolela dimmer min point bonyane ho 0 V, moedi o sebedisetswa ho fifala ho ya ho ntlha.
9. E fetotse mokhoa oa ho phethela lotho haeba ho ka fumanoa tse kopitsoang.
10. Taba e rarollotsoeng moo mokhanni ea habeli kapa ea phoso a neng a ka eketsa lotho config counter haeba e ne e le mokhanni oa ho qetela lotho.
11. GUI joale e iphapanyetsa -S kapa -T ha e bapisa le lotho config mode.
12. E kentse ts'ebetso ea tlhophiso e hole. Litlhophiso tsa Remote li baloa feela.
13. E kenyellelitse bokhoni ba tsela ea SMB ea marang-rang bakeng sa li-configs tse hole le foldara ea csv log.
14. Phatlalatso ea phasewete ea tlhahiso-leseling e se e le fensetere ea popup, ho fapana le puisano E lumella ho kenya konopo ea keyboard, ho sebetsa hantle ha o kenya phasewete. E kentse 8.7V max dimmer voltage ho litlhophiso tsa GUI bakeng sa mefuta e Isolated. Hardware ha e khone ho ts'ehetsa boleng ba dimmer ka holimo ho 8.7V, yuniti e kanna ea se fihle ho 100% tlhahiso haeba e entsoe ka holimo ho 8.7V.
15. Ts'ebetso ea NTC e koetsoe ntle le mefuta e sa e tšehetseng.

Mofuta oa 2.0.6 (12 Phuptjane 2019)

1. Ha o qala GUI, ho fanoa ka mekhoa e 'meli: Mokhoa oa Tlhahiso le Mokhoa oa Moqapi. Design Mode e fa basebelisi taolo e felletseng ea GUI. Mokhoa oa Tlhahiso o lumella feela hore ho be le mananeo a lotho mme e thibela bokhoni ba ho theha litlhophiso tse ncha tsa mokhanni. Fokotsa, eketsa litlhophiso, ntlafatsa firmware, 'me u hlakole likonopo tsa tlhophiso li patiloe ho Mokhoa oa Tlhahiso.
2. E kenyelelitsoe ho lumellana le NFC.
3.  Liphoso tsa mananeo le litemoso ha li sa hlola li fokotseha.
4. E khetholla pakeng tsa phoso litabeng tsa mananeo le barcode, litaba tsa barcode li bontša skrine e mosehla ea ntlafatso, liphoso tsa lenaneo li bontša skrine e khubelu ea ntlafatso.
5. E kenyellelitsoe voltage tlhophiso lifensetere bakeng sa ho sebelisoa le VZM letoto.
6.  E kentse skrine ea tlhahisoleseling ho tsebisa mosebelisi ha mokhanni a ntse a hlophisoa.
7. Sebaka sa marang-rang sa CSV se phehella ho fihlela se fetoloa ke mosebelisi.
8. Taba e tsitsitseng ea ho theha sekheo se se nang letho kapa se habeli ha o kenya tlhophiso file.

Mofuta oa 2.0.5 (25 Pherekhong 2019) 

1. E kentse dimming curve profile likhetho tsa 1% tse nang le dim to off; 10% e nang le dim ho tima le ntle le eona; ESS standard linear dimming curve; le ANSI dimming curve. Ha o hokela bakhanni ba PSB50-40-30 ba entsoeng ka ntlafatso ea C, joale motho a ka khetha har'a tse latelang tse 8 tse hlalositsoeng esale pele tsa 0-10V dimming pro.files:
   • 1% bonyane ba dimming ka dim-to-off
   • 1% bonyane ba dimming ntle le dim-to-off
   • 10% bonyane ba dimming ka dim-to-off
   • 10% bonyane ba dimming ntle le dim-to-off
   • Logarithmic
   • ANSI C137.1: e tshwana le 1% ya ho fifala ha nyane ka dim-to-off empa ka boleng bo fapaneng ba ditto-off
   • ESS linear: e ts'oanang le linear profile e sebelisitsoeng letotong la ESS/ESST, ESP/ESPT le ESM
   • E ka khonahala - e hlalositsoe ke mosebelisi: Ntlha e 'ngoe le e 'ngoe ho pro enafile e hlophisehile ka botlalo ke mosebelisi
   Bakhanni ba PSB50-40-30 ba entsoeng ka beke kapa ka mor'a beke ea 50 ea 2018 ba romelloa ka "1% bonyane ba dimming ka dim-to-off" 0-10V pro.file joalo ka pro ea kamehlafile. Ka kopo hlokomela hore, ha o hokela bakhanni ba PSB50-40-30 ba entsoeng ka ntlafatso A kapa B, motho a ka khetha feela tse 4 tse latelang tse hlalositsoeng esale pele 0-10V dimming pro.files:
   • Logarithmic
   • ANSI C137.1
   • ESS linear
   • E ka khonahala - e hlalositsoe ke mosebelisi
2. Tšehetso e ekelitsoeng bakeng sa khatiso ea li-label; 'me u kenye konopo ea ho leka ho hatisa hape haeba leibole e sa hatisoa ka mor'a mananeo a atlehileng a mokhanni.
3. Lokisa ho hlakolwa ha ditlhophiso tsohle ka phoso haeba "Delete Selection" e tobetse habeli fensetereng ea Khetho ea Tlhophiso. Tlosa config hona joale e na le fensetere ea tiiso ea popup.
4. E kenyellelitse litlhophiso tsa mokhanni oa PMB Series.
5. Peresente e ekelitsoengtage ea ho li-parameter tsa dimmer dimmer ha ho sebelisoa li-curve tsa dimming tse reriloeng.
6. E kentse sebaka sa foldara ea Log Configuration e khethiloeng hajoale ho tlhophiso ea setoko view.
7. E kentse konopo ho fetola sebaka sa foldara ea Log Configuration.
8. Konopo ea "Modify Driver Program" e koetsoe ho fihlela tlhophiso ea mokhanni e balile ka botlalo.
9. Haeba Lot Configuration database e na le e ts'oanang le mofuta oa hajoale o hokahaneng, tafole ea Lot Configuration e tla ikhethela mofuta oo.
10. Melaetsa ea boemo ba GUI (ka tlase letsohong le letšehali la skrine), joale bontša seo GUI e se etsang hajoale. E bonts'a hore na u bala ho tsoa ho mokhanni, u hlophisa mokhanni, 'me u batla mokhanni.
11. Rename Configuration konopo e se e sebetsa ka botlalo skrineng sa Lot Configuration. Mosebelisi a ka tobetsa konopo, kapa a tobetse tlhophiso habeli, a ba fa khetho ea ho reha tlhaloso ea tlhophiso.
12. Cheke e kentsoeng ea li-barcode tse kopitsoang tse fumanoeng, e boloka libarcode tsohle tse hlophisitsoeng sebakeng sa hajoale se ntseng se tsoela pele.
13. E kentse netefatso ea ho bala ka mor'a ho hlophisa mokhanni ka mokhoa oa Lot Programming; haeba li-parameter kaofela li balla morao, ngola e le pass in log file.
14.  Lotho e Atolositsoeng ea Lenaneo la Lotho file ho kenyelletsa 100% ea likarolo tsohle tse hlophisitsoeng
15. Cheke e kenyellelitsoeng bakeng sa barcode e se nang letho kapa ea kamehla ho Lot Programming mode.
16. Konopo e kentsoeng ho hlophisa sebaka sa litlhaloso ho Lot Configuration.
17. Lot Programming e tla qala hape ka bo eona ka mor'a hore mokhanni oa mohlala o fosahetseng a hokahane.
18. Fetotse sebaka sa 0-10V sa barathoko ho lenane la dimmer voltages.

Phetolelo ea 2.0.4

1. Ha se mofuta oa phatlalatsa oa Driver Configuration Tool

Mofuta oa 2.0.3 (01 Mphalane 2018)

1. GUI e nchafatsa mokhanni ka bo eona, mabapi le khokahanyo, haeba e fumana ho tsoa ho marang-rang kapa li-byte tsa data tse senyehileng. Lethathamo la litekanyetso tse amohelehang tse behiloeng.
2. Ts'ebetso e tsoetseng pele ea TRIAC bakeng sa bakhanni ba PHB Series.
3. E kentse tšebetso ea khatiso ea li-label.
4. 0-10V le TRIAC Min Out kaofela li tšoaroa ka % sebakeng sa mV.
5. Konopo e tsitsitseng ea mananeo a mangata e leng mananeo a 1 mokhanni.
6. Kerafo e kentsoeng bakeng sa ts'ebetso ea NTC.
7. E kentse 0-10V le tlhaloso ea ts'ebetso ea TRIAC ho bara ba ka thōko.
8. Potoloho e bulehileng voltage le bonyane voltage ha e sa hlahisoa ho latela maikutlo a basebelisi.

Mofuta oa 1.1.1 (12 Phato 2018)

1. Fixed bug moo ts'ebetso ea phetisetso ea TRIAC (PHB Series feela), e ne e ntse e hlophisoa ka boleng bo ts'oanang le ts'ebetso ea phetisetso ea 0-10V.

Mofuta oa 1.1.0 (02 Phupu 2018)

1. E kenyellelitse li-parameter tsa NTC ho tsohle files ho kenyelletsa lenane la tlhophiso.
2. E kentsoe .csv log file litokiso, tse nepahetseng bakeng sa hore foldara ea data ea ERP e hlakoloe.
3. E tsamaisitse likonopo tsa tlhophiso ea ho kenya/romela ka lehlakoreng le letona.
4. GUI e kopantsoeng pakeng tsa PSB Series le PDB Series.

Litokomane / Lisebelisoa

ERP POWER ERP Programming Software Driver Configuration Tool [pdf] Bukana ea Mosebelisi ERP Programming Software Driver Configuration Tool, ERP, Programming Software Driver Configuration Tool, Software Driver Configuration Tool, Configuration Tool.

Litšupiso

• Bukana ea Mosebelisi