ERP Programming Software
Bayanan Bayani na Sakin Kanfigareshan Direba

Kayan aikin Kanfigareshan Direba Software

Siga 2.1.1 (19 Oktoba 2022)

1. Sabunta saitunan tsoho.
2. Ƙara littattafan mai amfani zuwa babban fayil ɗin takardu.
3. Ƙara gyara ga wasu direbobi don gyara halayen ginawa.
4. Ƙara duba don rufaffiyar madauki da buɗe madauki PKB/PKM. Za ta gyara duk wani buɗaɗɗen madauki ko rufaffiyar madauki da aka saita tare da saitunan madauki na gaba.
5. Daidaita daidaitawa zai yi amfani da ko dai lambar ƙirar gaskiya ba tare da ɓoyewar masana'anta kawai ba, ko lambar ƙirar da aka nuna. Wannan yana hana saitin kuri'a tsayawa idan an haɗa direban "-A" ko "-DN".
6. Babu lambar lambar da ke akwai ko mara inganci da aka ci karo da ita yayin yanayin saitin kuri'a da zai ƙara yawan ma'aunin saitin, amma har yanzu yana ba da gargaɗi.
7. Babu Barcode da ke yanzu ko lambar barcode mara inganci yanzu ta lissafa sakamakon shirye-shirye a matsayin "Gargadi" a cikin log ɗin saita saiti, maimakon "Kuskure."
8. Lot config model combo box matching na iya amfani da lambar ƙirar da aka nuna, ko cikakken lambar ƙirar don dacewa. Ƙoƙarin daidaita lambar ƙirar da aka nuna da farko.
9. Ƙara ingantaccen tallafi don STM32L16x bootloader.
10. Cire kuskuren taga popup na bootloader, ba daidai ba yana ba da umarni naúrar don sake zagayowar naúrar ana sabunta ta.

Sigar 2.0.9 (14 Mayu 2021)

1. An ƙara shirin NTC don jerin PKM.
2. Kafaffen abubuwan menu na NTC lokacin da aka haɗa dimming mai daidaitawa da direban NTC mai daidaitawa.
3. Ƙara maɓallin juyawa don canzawa tsakanin viewNTC profile graph da dimmer profile jadawali.
4. Ƙara goyon baya don manyan žwažwalwar ajiya na FW.
5. Kafaffen sikelin DPI don TRIAC, 0-10 V da NTC jadawali views.
6. Kafaffen jadawali dimmer mai taɓa ma'anar asali 0,0 koda an kashe dimmer.

Siga 2.0.8 (09 Oktoba 2020)

1. An ƙara dacewa PTB/PKB/PKM.
2. Rubutun gefe yanzu ana iya zaɓar linzamin kwamfuta don kwafin bayanai cikin sauƙi.
3. Ƙara rubutun mirgina don firinta na zebra idan rubutu ya wuce faɗin filin.
4. Haɓaka Ayyukan Firmware na Unit yanzu na iya amfani da hanyoyin hanyar sadarwa.
5. Ƙara filayen TRIAC/ELV mai launi don max da kusurwoyin gudanarwa na min don tsabtar gani.
6.  Ƙara gyaran atomatik don PKB/PKM/PTB wanda aka tsara tare da sake fasalin GUI na baya.
7. Ƙara ƙarfin don ayyana launi jigo da hoton banner tare da rubutu file, CustomerColors.txt.
8. Ƙara harufan Windows ba bisa doka ba duba don shiga file tsara suna.
9. gyare-gyaren kwaro iri-iri da haɓaka kwanciyar hankali

Sigar 2.0.7 (15 Janairu 2020)

1. An ƙara dacewa VZM, voltage yana cikin mV, ba duka volts ba.
2. Ƙara kariya ta kalmar sirri don yanayin ƙira.
3. Kafaffen batun inda samfuran DAL da CNB-SIL ba za su yi shiri sosai ba.
4. Kafaffen gogewa na lambobi biyu na ƙarshe a cikin zaren FW.
5. Kafaffen batu inda 0-10V saiti min ƙima a ƙasa 0.7 V ba zai nuna daidai ba.
6. Canza min dim zuwa kashe hysteresis zuwa 0.01 V.
7. Canza girman matakin saitin dimmer zuwa 0.01 V.
8. Canza mafi ƙanƙanta mafi ƙarancin dimmer zuwa 0 V, iyaka da aka yi amfani da shi don zama mai rauni zuwa wurin kashewa.
9. Canza halayen kammala kuri'a idan an sami kwafi.
10. Matsalar da aka warware inda mai kwafi ko direban kuskure zai ƙara yawan adadin saiti idan shine direba na ƙarshe a cikin kuri'a.
11. GUI yanzu yayi watsi da -S ko -T lokacin daidaitawa don yanayin saitin yawa.
12. Ƙara ƙarfin daidaitawa mai nisa. Ana karanta saitin nesa kawai.
13. Ƙara damar hanyar hanyar sadarwa ta SMB don saitin nesa da babban fayil log log na csv.
14. Samarwa/Yanayin ƙira kalmar sirri Falowar yanzu taga ce mai tasowa, maimakon maganganu Yana ba da damar shigar da maɓallin madannai, don aiki da kyau lokacin shigar da kalmar wucewa. An ƙara 8.7V max dimmer voltage zuwa saitunan GUI don keɓantattun samfura. Hardware ba zai iya goyan bayan ƙimar dimmer sama da 8.7V, naúrar bazai iya kaiwa 100% fitarwa idan an tsara shi sama da 8.7V.
15. An kashe aikin NTC sai ga ƙira waɗanda basa goyan bayan sa.

Sigar 2.0.6 (12 Yuni 2019)

1. Bayan ƙaddamar da GUI, ana ba da hanyoyi guda biyu: Yanayin samarwa da Yanayin ƙira. Yanayin ƙira yana ba masu amfani cikakken ikon GUI. Yanayin samarwa kawai yana ba da damar tsara shirye-shirye da yawa kuma yana riƙe da ikon ƙirƙirar sabbin saitunan direba. Gyara, ƙara daidaitawa, haɓaka firmware, da share maɓallan sanyi suna ɓoye a Yanayin samarwa.
2. An ƙara dacewa NFC.
3.  Kurakuran shirye-shirye da faɗakarwa ba su daina rage adadin ƙima.
4. Bambance-bambance tsakanin kuskure a cikin batutuwan shirye-shirye da lambar lamba, al'amurran da suka shafi barcode suna nuna allon sabuntawar rawaya, kurakuran shirye-shirye suna nuna allon sabuntawar ja.
5. Ƙara yawan juzu'itage daidaitawar windows don amfani tare da jerin VZM.
6.  Ƙara allon bayani don sanar da mai amfani lokacin da ake tsara direban.
7. Wurin log ɗin CSV yana ci gaba har sai mai amfani ya canza shi.
8. Kafaffen batu na ƙirƙirar saiti mara kyau ko kwafi lokacin shigo da tsari file.

Sigar 2.0.5 (25 Janairu 2019) 

1. An ƙara dimming curve profile zaɓi don 1% tare da kuma ba tare da dim zuwa kashe ba; 10% tare da kuma ba tare da dim zuwa kashe; ESS daidaitaccen lanƙwasa madaidaiciya madaidaiciya; da ANSI dimming curve. Lokacin haɗa direbobin PSB50-40-30 waɗanda aka ƙera tare da bita C, yanzu mutum zai iya zaɓar tsakanin waɗannan 8 da aka riga aka ayyana 0-10V dimming pro.files:
   1% mafi ƙarancin dimming tare da dim-to-off
   1% mafi ƙarancin dimming ba tare da dim-da-kashe ba
   10% mafi ƙarancin dimming tare da dim-to-off
   10% mafi ƙarancin dimming ba tare da dim-da-kashe ba
   • Logarithmic
   ANSI C137.1: daidai da 1% ƙaramar dimming tare da dim-to-off amma tare da ƙimar ditto-kashe daban.
   ESS mai layi: iri ɗaya da profile Ana amfani da su a cikin ESS/ESST, ESP/ESPT da ESM jerin
   • Mai shirye-shirye – ayyana mai amfani: Kowane batu a cikin wannan profile yana da cikakken shirye-shirye ta mai amfani
   Direbobin PSB50-40-30 da aka kera akan ko bayan sati 50 na 2018 ana jigilar su tare da “1% ƙaramin dimming tare da dim-to-off” 0-10V profile as the default profile. Lura cewa, lokacin da ake haɗa direbobin PSB50-40-30 da aka ƙera tare da bita A ko B, mutum zai iya zaɓar kawai 4 da aka riga aka ayyana 0-10V dimming pro.files:
   • Logarithmic
   • ANSI C137.1
   • ESS mai layi
   • Mai shirye-shirye – an ayyana mai amfani
2. Ƙara goyon baya don buga alamar; da ƙara maɓallin sake gwadawa idan ba a buga alamar ba bayan nasarar shirin direba.
3. Kafaffen gogewa na bazata na duk saitunan idan an danna "Delete Selection" sau biyu a cikin taga Zaɓin Kanfigareshan. Share saitin yanzu yana da taga mai tabbatarwa.
4. An ƙara saitunan direban PMB Series.
5. Ƙara kashitages zuwa madaidaicin dimmer na gefe lokacin da ake amfani da madaidaitan lanƙwasa.
6. Ƙara wurin babban fayil ɗin Kanfigareshan Log da aka zaɓa a halin yanzu zuwa tsarin haja view.
7. Ƙara maɓallin don canza wurin babban fayil ɗin Kanfigareshan Log.
8. Ana kashe maɓallin “gyara Shirin Direba” har sai an gama karanta cikakken tsarin direba.
9. Idan bayanan Kanfigareshan Lutu yana da wasa don ƙirar da aka haɗa a halin yanzu, Teburin Kanfigareshan Lutu zai zaɓi wannan ƙirar ta atomatik.
10. Saƙonnin matsayi na GUI (a ƙasa hagu na allo), yanzu nuna abin da GUI ke yi a halin yanzu. Nuna idan karatu daga direba, shirye-shiryen direba, da kuma neman direba.
11. Maɓallin Kanfigareshan Sake suna yanzu yana aiki cikakke a allon Kanfigareshan Lutu. Mai amfani na iya danna maballin, ko danna maballin daidaitawa sau biyu, yana ba su zaɓi don sake suna bayanin sanyi.
12. Ƙara rajista don kwafin lambobin barcode da aka samo, yana adana duk barcode ɗin da aka tsara a cikin tsari mai gudana na yanzu.
13. Ƙara tabbatar da duba-karanta bayan tsara direba a cikin Yanayin Shirye-shiryen Lot; idan duk sigogin da aka karanta baya sun dace, yi lakabi da izinin shiga log file.
14.  Fadada log Programming log file don haɗa 100% na duk sigogin da aka tsara
15. Ƙara rajistan shiga mara kyau ko lambar barcode zuwa yanayin Shirye-shiryen Lot.
16. Ƙara maɓallin don gyara filin bayanin akan Kanfigareshan Lot.
17. Lot Programming zai ci gaba ta atomatik bayan an haɗa direba mara kyau.
18. Canza filin bar gefe na 0-10V zuwa lissafin dimmer voltage.

Shafin 2.0.4

1. Ba sigar sakin jama'a na Kayan aikin Kanfigareshan Direba ba

Siga 2.0.3 (01 Oktoba 2018)

1. GUI tana sabunta direba ta atomatik, akan haɗin kai, idan ta gano ba ta da iyaka ko lalata bayanan bytes. An saita kewayon ƙimar karɓuwa.
2. Babban aikin TRIAC don direbobin PHB Series.
3. Ƙara aikin buga lakabin.
4. 0-10V da TRIAC Min Out ana sarrafa su a cikin% maimakon mV.
5. Kafaffen maɓalli na shirye-shirye wanda ke shirye-shiryen 1 direba.
6. Ƙara jadawali don ayyukan NTC.
7. Ƙara 0-10V da bayanin aikin TRIAC zuwa mashigin gefe.
8. Buɗe kewaye mai juzu'itage da mafi ƙarancin voltage ba a sake nunawa bisa ga ra'ayin mai amfani.

Sigar 1.1.1 (12 Agusta 2018)

1. Kafaffen kwaro inda aikin canja wurin TRIAC (PHB Series kawai), ana daidaita shi tare da ƙimar daidai da aikin canja wurin 0-10V.

Sigar 1.1.0 (02 Yuli 2018)

1. Ƙara sigogin NTC a cikin duka files ciki har da lissafin tsari.
2. Ƙara .csv log file gyarawa, wanda yayi daidai ga babban fayil ɗin bayanan ERP da ake sharewa.
3. Matsar da maɓallan daidaitawar shigo da fitarwa zuwa gefen dama.
4. Haɗa GUI tsakanin PSB Series da PDB Series.

Takardu / Albarkatu

ERP POWER ERP Shirye-shiryen Kayan aikin Kanfigareshan Direba [pdf] Jagorar mai amfani ERP Shirye-shiryen Kayan aikin Kanfigareshan Direba, ERP, Kayan aikin Kanfigareshan Direba Software, Kayan aikin Kanfigareshan Direban Software, Kayan Kanfigareshan

Magana

• Manual mai amfani