E-Plex 2000 &
PowerPlex 2000
Litaelo tsa ho Hloma
2000 Power Plex Access Data System
Bakeng sa thuso ea tekheniki, letsetsa 1-800-849-TECH (8324) kapa 336-725-1331
Ka kopo bala le ho latela litaelo tsohle ka hloko.
Litaelo tsena li etselitsoe ho sebelisoa ke litsebi tsa tlhokomelo kapa li-lockers tse tsebang mekhoa e tloaelehileng ea tšireletso le tse nang le bokhoni ba ho etsa mehato e hlalositsoeng. dormakaba ha e ikarabelle bakeng sa tšenyo kapa ho se sebetse ka lebaka la ho kenngoa ho fosahetseng.
Bohlokoa: Ka hloko hlahloba lifensetere, mamati, mamati, joalo-joalo ho netefatsa hore mekhoa e khothaletsoang e ke ke ea baka tšenyo. tiisetso e tloaelehileng ea dormakaba ha e koahele tšenyo e bakiloeng ke ho kenya.
A. CYLINDRICAL LEHLOKO
Likarolo le Lethathamo la Lisebelisoa
Lockset ka 'ngoe ea E-Plex/PowerPlex 2xxx e kenyelletsa:
- Ka ntle notlela matlo
- Kopano ea senotlolo ka hare
- Kantle lere
- Gasket bakeng sa matlo a notlela kantle (eseng bakeng sa liphetolelo tsa PowerPlex 2000)
- Latch ea cylindrical
- Sehlopha sa li-cylinder drive
- Sets'oants'o sa betri se nang le libeteri tse 3 tsa AA (ha li kenyelelitsoe liphetolelong tsa PowerPlex 2000)
- Litempele tsa ho phunya
- Mokotla oa Hardware, o kenyelletsa:
– square spindle
- Phillips screw (6-32 x 5⁄16″) (eseng bakeng sa liphetolelo tsa PowerPlex 2000)
– Ho otla kit
- (3) li-screw tse kenyang (12-24, 1⁄8″ hlooho ea hex)
- Allen Key 1⁄8″ - Allen Key 5⁄64″
– (2) 1″ (25 mm) Likurufu tsa Phillips
– (1) selemo se atolositsoeng
– (4) lipara tsa Flat Head screws 10-24
- (3) li-spacers - Phetolelo ea Senotlolo (Ha ho boikhethelo)
- (1) silinda e nang le linotlolo tse 2 bakeng sa ho feta (haeba e na le lisebelisoa)
- (1) plug ea cylinder (haeba e na le lisebelisoa)
- (1) cylinder cap (haeba e na le lisebelisoa)
- (2) li-adapter tsa li-cylinders tsa mofuta o motle ka ho fetisisa (haeba li na le lisebelisoa)
- (1) sesebelisoa sa shaft (haeba se na le lisebelisoa)
Tlhokomeliso: Bakeng sa linotlolo tsa E-Plex/PowerPlex 2000, Master Code ea senotlolo sena e se e setiloe esale pele: 1,2,3,4,5,6,7,8. Ho kenya ts'ebetso ea senotlolo, motsoako oa master o tlameha ho fetoloa nakong ea ho kenya. Bakeng sa liloko tsa E-Plex 24xx, o tla tlameha ho hlahisa khoutu ea phihlello o sebelisa web sesebelisoa sa ho leka ts'ebetso ea senotlolo.
DISEBETSI TSE HLOKANG:
- Likhalase tsa Tšireletso
- 1⁄2″ (13 mm) chisel
- 1-8 ″ (3 limilimithara) tirila hanyenyane
- 1-2 ″ (13 limilimithara) tirila hanyenyane
- 7⁄8″ (22 mm) kotopo ea ho phunya kapa sakha ea lesoba
- 1 ″ (25 mm) kotopo ea ho phunya kapa sakha ea lesoba
- 21⁄8″ (54 mm) sakha ea lesoba
- Qeta
- Setebele sa awl kapa bohareng
- Mallet ea rabara
- Sekoti se senyenyane se sephara (ka tlase ho 1⁄8″)
- Phillips screwdriver (#2)
- Tšepe e ntle file
- Routa
- Sekwere se feto-fetohang
- Tekanyo ea theipi
- Pensele
- Theipi
- Lisebelisoa tsa ho hloekisa (lesela, vacuum)
- Spanner screwdriver #6
Setšoantšo sa LOCK:
| (A) Notlela matlo (B) Hub e ka hare ea koloi (C) Sehlapa sa nylon (D) Phupu ea ho khanna (E) Lever tšoasa |
(F) Setsi sa metsi (G) Kantle Lever (H) Cap (haeba e na le thepa) (I) Cylinder (haeba e na le thepa) (J) Polaka ea cylinder (haeba e na le lisebelisoa) |
A-1. Tokisetso ya Monyako
Hlokomela: Koa ka mahlakoreng a mabeli a lemati ho thibela tšenyo e sa bonahaleng.
- Etsa qeto ea hore na ke thempleite efe e lumellanang le kopo ea hau ea E-Plex 2xxx (e ka ba 2 3⁄8″ [60 mm] Backset kapa 2 3⁄4″ [70 mm] Backset).
- Beha thempleite ea pampiri e nepahetseng (e fanoeng) monyako 'me u tšoaee masoba. Cheka masoba a mararo a 1⁄2″ (13 mm) pele. Ka mor'a moo, phunya lesoba la 2 1⁄8″ (54 mm) sefapanong. Epa lesoba la 1" (25 mm) qetellong.
- Senya monyako oa latch unit faceplate 3⁄16″ (5 mm) botebo ho isa ho litekanyo tse bontšitsoeng. Kenya yuniti ea latch lesobeng la 1" (25 mm), ho etsa bonnete ba hore bevel ea latch bolt e shebane le lemati le koalang.
- Sireletsa latch lemating ka li-screw tse peli tsa 1″ (25 mm) tsa Phillips Mounting tse fanoeng. Latch unit faceplate e tlameha ho hlatsuoa le lemati (bakeng sa mamati a nang le lesoba le bophara ba 1″, sebelisa letsoho holim'a latch).
A-2. LETLAKO LEATLA
E-Plex 2xxx ke senotlolo se sa sebelisoeng ka letsoho se kentsoeng esale pele bakeng sa ho kenya lemati le letšehali.
- Etsa qeto ea letsoho la monyako oa hau. Bakeng sa mamati a Letsoho la Leqele, fetela ho Karolo ea C. Bakeng sa mamati a Letsoho le letona, latela mehato e ka tlase.
- Tlosa li-screws tse peli tse hokelang ho yuniti ea cylindrical drive. Fetolela cylindrical drive unit 180º. Beha li-spacer joalo ka ha li fumanoa pele li qhaqhoa. Remount drive unit e nang le li-screw tse peli tse hokelang.
A-3. LENYAKO LEKOEANA
Ho ipapisitsoe le mofuta oa li-spacers tse rometsoeng le senotlolo, khetha Lethathamo la 1 kapa Lethathamo la 2 ho lokisa poleiti ea sehokelo le cylindrical drive unit bakeng sa botenya ba mamati bo fapaneng ho feta 1 3⁄4″ bo bokaneng fekthering. Tlhokomeliso: Ho bohlokoa haholo ho kopanya li-spacers sebakeng se bontšitsoeng.
1. LOTELA KA LI-SPACER TSE 3 TSE FAPANENG
Sehlahisoa sa cylindrical unit le plate assembly li romelloa li kopane fekthering bakeng sa botenya ba mamati a 1 3⁄4″ (44 mm) (1 11⁄16″ [43 limilimithara] ho isa ho tse ka tlase ho 1 7⁄8″ [48 limilimithara]) ka sebaka se 2- "04"; 1 spacer “02” le likurufu tse 2 tsa hlooho e bataletseng 5⁄8″ (16 mm) LG. Bakeng sa botenya ba mamati a mang, sebelisa Lemati la Botenya ba Lemati la 1 bakeng sa li-spacers le likurufu tse loketseng tse kenyellelitsoeng ka mokotleng oa hardware. Lokisetsa li-attachment plate le cylindrical drive unit bakeng sa botenya ba mamati bo ka tlase ho 1 11⁄16″ (43 mm) kapa 1 7⁄8″ (48 mm) le holimo ho latela Lemati la Botenya ba Lemati la 1.
Lemati la Botenya Tafole ea 1
| Monyako Botenya | Spacer 02 | Spacer 04 | Spacer 08 | Bolelele ba screw |
| 1 3⁄8″ (35 mm) ho isa ho 1 9⁄16″ (40 mm) | – | 1 | – | 3⁄8″ (10 limilimithara) |
| Ho feta 1 9⁄16″ (40 mm) ho ya ho tlase ho 1 11⁄16″ (43 mm) | – | 2 | – | 1⁄2″ (13 limilimithara) |
| 1 3⁄4″ (44 mm) MONYAKO 1 11⁄16 (43 mm) ho ya ho tlase ho 1 7⁄8″ | 1 | 2 | – | 5⁄8″ (16 limilimithara) |
| 1 7⁄8″ (48 mm) ho isa ho 1 15⁄16″ (49 mm) | 1 | – | 1 | 5⁄8″ (16 limilimithara) |
| Ho feta 1 15⁄16″ (49 mm) ho ya ho tlase ho 2 1⁄8″ (54 mm) | 2 | – | 1 | 3⁄4″ (19 limilimithara) |
| 2 1⁄8″ (54 mm) ho isa ho 2 3⁄16″ (56 mm) | – | 1 | 1 | 3⁄4″ (19 limilimithara) |
| Ho feta 2 3⁄16″ (56 mm) ho isa ho 2 3⁄8″ (60 mm) | 2 | 1 | 1 | 7⁄8″ (22 limilimithara) |
| Ho feta 2 3⁄8″ (60 mm) ho isa ho 2 1⁄2″ (64 mm) | – | – | 2 | 7⁄8″ (22 limilimithara) |
2. LOTELA KA LI-SPACER TSE 2 TSE FAPANENG
Sehlahisoa sa cylindrical unit and plate assembly se romelloa se kopane fekthering bakeng sa botenya ba mamati a 1 3⁄4″ (44 mm) ho fihla ho 1 13⁄16″ [46 limilimithara] le li-spacers tse 2 "07"; Sepakapaka se le 1 “08” le likurufu tse 2 tsa hlooho e sephara tse bolelele ba 5⁄8″ (16 mm). Bakeng sa botenya ba mamati a mang, sebelisa Lemati la Botenya ba 2 bakeng sa li-spacers le li-screw tse loketseng tse kenyellelitsoeng ka mokotleng oa hardware.
Lemati la Botenya Tafole ea 2
| Monyako Botenya | Spacer 07 | Spacer 08 | Screw bolelele |
| 1 3⁄8″ (35 mm) ho isa ho 1 9⁄16″ (40 mm) | 2 | – | 3⁄8″ (10 limilimithara) |
| 1 5⁄8″ (41 mm) ho isa ho 1 11⁄16″ (43 mm) | 1 | 1 | 1⁄2″ (13 limilimithara) |
| 1 3⁄4″ (44 mm) ho isa ho 1 13⁄16″ (46 mm) | 2 | 1 | 5⁄8″ (16 limilimithara) |
| 1 7⁄8″ (48 mm) ho isa ho 1 15⁄16″ (49 mm) | – | 2 | 5⁄8″ (16 limilimithara) |
| 2″ (51 mm) ho isa ho 2 1⁄16″ (52.5 mm) | 1 | 2 | 3⁄4″ (19 limilimithara) |
| 2 1⁄8″ (54 mm) ho isa ho 2 3⁄16″ (56 mm) | 2 | 2 | 3⁄4″ (19 limilimithara) |
| 2 1⁄4″ (57 mm) ho isa ho 2 5⁄16″ (59 mm) | – | 3 | 7⁄8″ (22 limilimithara) |
| 2 3⁄8″ (60 mm) ho isa ho 2 1⁄2″ (64 mm) | 1 | 3 | 7⁄8″ (22 limilimithara) |
| Bolelele ba Screw | Tekanyo e felletseng |
| Bolelele 3⁄8″ (10 mm) |  |
| Bolelele 1⁄2″ (13 mm) |  |
| Bolelele 5⁄8″ (16 mm) |  |
| Bolelele 3⁄4″ (19 mm) |  |
| Bolelele 7⁄8″ (22 mm) |  |
A-4. HO KENYA NTLO TLOKO
- Tlosa kopano ea cylindrical plate ho tloha ntlong e ka ntle (a). Kenya ntlha e kentsoeng ea sekoere se ohlang ka har'a hub ea lever ea matlo ho fihlela e notleha, ka khutlo
ea 45º. (The spindle e ka tlosoa ka ho hula ho eona, haeba e lebisitsoe ka phoso.) - Bokella gasket holim'a ntlo e ka ntle (a). Kopanya cylindrical plate assembly holim'a ntlo ea linotlolo e kantle. (Ha e hlokehe bakeng sa mefuta ea PowerPlex 2000)
- Beha ntlo e ka ntle (a) le kopano ea cylindrical plate monyako e le hore e kenye latch joalokaha ho bontšitsoe.
- Ka har'a kopano ea sekoahelo se ka hare, retelletsa lever sebakeng se nepahetseng sa ho phomola bakeng sa ho fana ka lemati. Kenya setsi sa tsitsipano (l) lipakeng tsa "stop plate" (h) le poso (p).
- Beha monoana o motona (T) sebakeng se otlolohileng. Kopanya li-spacers tse 3 (S) monyako (bakeng sa mefuta ea morao-rao feela). Beha kopano ea ka hare ea trim monyako e le hore li-spindle tse ka holimo le tse tlaase (F) le (G) li kenye letsoho le lehare le ka hare. Tobetsa ntlong e ka ntle u sebelisa li-screw tse tharo tsa 1/8 ″ hex drive mounting (I). Kenya li-screws ntle le ho tiisa. Netefatsa hore lever e ka hare le monoana oa letsoho o sebetsa butle. Haeba e se suthisa matlo a ka hare le ka ntle hanyenyane. Ebe u tiisa li-screws.
A-5. HO HLOMELA LEOTLA
Hlokomela: Sebelisa feela lebokose la ho otla le ho otla le fanoeng.
Tšebeliso ea likarolo tse sa lumelloeng e tla baka bothata ba ts'ebetso 'me e ka senya waranti.
- Tšoaea sebaka sa seteraeke foreiming ea lemati, etsa bonnete ba hore ho buloa ha seterata ho tsamaisana le boutu ea latch.
- Khutsa foreimi ea monyako bakeng sa seteraeke sa 3⁄32″ (3 mm) botebo ba bonyane ho ea ho litekanyo tse bontšitsoeng. Etsa sekoa bakeng sa lebokose la lerole. Sireletsa foreime ea lemati ka li-screw tse peli tsa 1" (25 mm).
Tlhokomeliso: Lekola ts'ebetso ea latch ka ho etsa bonnete ba hore "deadlatch" e ema khahlano le seteraeke joalo ka ha ho bonts'itsoe 'me ha e thelle ho bula ha lemati le koetsoe. Haeba boemo boo bo etsahala, joale ho ka etsahala ho koala ka ho feletseng. Sena se tla hlakola waranti ea rona ea mochini o felletseng oa senotlolo. Haeba ho hlokahala, lokisa lemati ho feta tekano ka ho sebelisa li-bumpers tsa rabara joalokaha ho hlalositsoe Karolong ea P (Ho Kenya Li-bumpers tsa Rubber).
B. MORTISE
Lethathamo la tlhahlobo le ho phatloha Views (Mortise Feela)
Lockset ka 'ngoe ea E2x00 Mortise e kenyelletsa:
(A) Kantle ho lever handle
(kapa)
Likarolo tsa mohlala o fetelletseng oa Mechini feela:
(A1) Motsoako oa lever ka ntle
(B1) Matlo a ka ntle
(C1) Polaka ea cylinder
(D1) Cylinder (bakeng sa linotlolo tse nang le khetho ea KIL)
(E1) Sekoahelo sa cylinder
(E2) Letlapa la litaelo "Mokhoa oa ho hokela lever holim'a senotlolo"
(B) Matlo a ka ntle
(C) Sets'oants'o sa betri se nang le libeteri tse 3 tsa AA (eseng bakeng sa liphetolelo tsa PowerPlex 2000)
(D) Mortise (ASM e rometsoe feela e kopantsoe le faceplate le 2 x 8-32 x 1/4" screws)
(E) Ka hare ho trim kopano, lintlha li itšetlehile ka mohlala oa senotlolo
(E3) Setšoantšo sa ho cheka
(N) Outdoor Gasket (eseng bakeng sa liphetolelo tsa PowerPlex 2000)
Likarolo tse ka hare ho mokotla oa hardware:
(F) Thumbturn (hex) spindle
(G) Sekoere se sekoere
(H) Phillips screw (6-32X 5/16”) (eseng bakeng sa liphetolelo tsa PowerPlex 2000)
(I) li-screws tse 3 x tse holisang (12-24, 1/8" Hex Head)
(J) Likurufu tse 2 tse entsoeng ka mochini (12-24X 1/2” Philips) le likurufu tse 2 tsa lehong (#12 X 1” Philips)
(K) Strike Kit (li-screw, seteraeke le mabokose)
(L) 1 selemo se atolositsoeng
(R2) Cylinder e le 1 e nang le linotlolo tse 2 bakeng sa E2x00 e nang le ho feta
(S) Li-spacers tse 3 bakeng sa Mehlala ea morao-rao feela
(T) Allen Key 1/8”
(U) Allen Key 5/64”
Lisebelisoa li Hlokahala:
- Likhalase tsa Tšireletso
- 1/2" (13mm) chisel
- 1/8" (3mm) kotopo ea ho cheka
- 1/2" (13mm) kotopo ea ho cheka
- 1” (25mm) kotopo ea ho phunya kapa sakha ea lesoba
- Qeta
- Setebele sa awl kapa bohareng
- Hammer Rubber mallet
- Sesebelisoa se nyane se sephara
- Philips screwdriver (#2)
- Tšepe e ntle file
- Mochini oa ho roala
- Routa
- Setšoantšo sa mortise faceplate router
- Sekwere se feto-fetohang
- Tekanyo ea theipi
- Pensele
- Theipi
- Lisebelisoa tsa ho hloekisa (lesela, vacuum)
American Standard Mortise e bontšitsoe
B-1. Ho kenya Mehlala e Tloaelehileng ea ASM
- Hlahloba Mortise Handing
a. Bapisa mortise le setšoantšo se ka tlase. Haeba setopo se nepahetse bakeng sa lemati, tsoela pele ka mohato oa 2.
Hlokomela: Sheba ho B-2 ho fetola mokhoa oa ho fana ka setopo se ka khutlisoang morao.
- Kenya Strike
a. Lulakanya thempleite ea pampiri holim'a foreime ea lemati ka bophahamo bo lakatsehang ba ho tšoara, 'me hammoho le mola o otlolohileng oa setsi sa mortise (CL), eo hape e leng mola o bohareng oa moeli oa monyako, o lumellang li-bumpers leha e le life foreiming ea monyako.
Hlokomela: Hlompha likhoutu tsa moaho tse amehang mabapi le bophahamo ba sebapi.
b. Tšoaea libaka tsa ho seha lebokoso la lerole le li-screws bakeng sa seteraeke.
c. Senya foreime ya lemati ho amohela lebokoso la lerole, mme o phunye masoba a pilot bakeng sa dikurufu tse ntseng di hola (ditekanyo le botebo bo ngotsweng template).
d. Beha seteraeke khahlano le foreimi ea lemati 'me u e lemahanye le masoba a ho hokelang. Latela moralo oa seteraeke.
e. Tlosa thepa ka har'a kemiso ea seteraeke e le hore seteraeke se tle se be le likosene tsa mamati.
f. Bakeng sa ASM, kenya lebokose la lerole (boikhethelo bakeng sa liforeimi tsa mamati a lepolanka, tse hlokehang bakeng sa liforeimi tsa mamati a tšepe), 'me u hlahlobe seteraeke se fanoang template. Kenya seteraeke u sebelisa li-screw tse fanoeng. Sebelisa likurufu tsa lehong bakeng sa foreimi ea lehong le likurufu tse entsoeng ka mochini bakeng sa liforeimi tsa tšepe.
Hlokomela: Ha seteraeke se kenngoa liforeimi tsa lehong tlas'a botenya ba lisenthimithara tse le 'ngoe, li-screws tsa lehong tse fanoeng ha li lekane. Sebelisa likurufu tsa bolelele bo hloahloa ho kenya sekontiri se ka morao ho foreimi. Sebelisa feela seteraeke le lebokose la lerole le fanoeng. Tšebeliso ea likarolo tse sa lumelloeng e ka senya waranti.
B-2. Ho Fetola Ho Fana ka Mortise
- ASM e fetohang
a. Tlosa sefahleho sa mortise. Beha setopo sebakeng se bataletseng bakeng sa mehato e latelang.
b. Eketsa "deadbolt" hanyane ka hanyane:
Bakeng sa ASM e tloaelehileng, potoloha hub (H) u sebelisa screwdriver, ho fihlela deadbolt (D) e atolosa hoo e ka bang 1/4".
Tsoela pele ka mohato c.
Bakeng sa Autodeadbolt ASM, rotate hub (H) ho fihlela deadbolt (D) e khutlisitsoe ka botlalo. Deadbolt e tla eketsa hoo e ka bang. 1/16" ho tsoa nyeoeng ea mofu.
Tšoara deadbolt (D) ka bonolo. Tobetsa le ho lokolla latch e thusang (X). U lokela ho utloa "deadbolt trigger" 'me u qale ho atolosa tlas'a matla a selemo.
Lokolla "deadbolt" (D) ka bonolo. E tlameha ho hola ho fihla ho 5/16 ″ approx. le ho emisa. Haeba deadbolt e fetela pele ho ntlha ena, e hatelle ka bonolo ho fihlela e notlela ka 5/16” ho lahlela, kapa qala mohato oa b hape.
- ASM e fetolehang (tsoela pele)
c. Sututsa boutu ea latch (L) bohareng ba setorouku sa eona, 'me u e tšoare moo.(Tsoelapele Mohato oa 1 le oa 2)
Tšoara latch (L) ka hare ho mortise, 'me kenya tailpiece ho boloka sesebelisoa (S, karolo # 027-510382 kapa #041-513342 fumaneha ka thoko) e le hore tailpiece (T) ke ke le tlohele ka hare ho mortise nyeoe. Tšoara sesebelisoa le latch ka letsoho le le leng, 'me u thellele mohatla u sebelisa screwdriver e nyane.
Tsoela pele ho tšoara sesebelisoa (S). Lokolla boutu ea latch (L) 'me u boloke latch e thibelang khohlano (F) e lebile lehlakoreng le bataletseng la boutu e le hore boutu e atolohe ka botlalo.
d. Tlosa latch bolt (L), ho fihlela e hlakola poleiti e ka pele. (Tlhokomeliso: Haeba u tlosa boutu ka botlalo, u tlameha ho e fetola 90° ho e kenya hape.)
Fetola boutu ea latch (L) 180°. E kenye hape ho fihlela qetellong ea stroke ea eona.
Ho tšoara sesebediswa (S) sebakeng, kenya hape mohatla (T) ka latch bolt (L) (slide tailpiece tlase). Ho ka 'na ha e-ba le papali e hlokahalang ho hokahanya likarolo. Tlosa sesebelisoa (S).
Lokolla latch bohareng ba stroke 'me ue tšoare moo.
Sebelisa screwdriver e nyane ho sutumelletsa mochini oa senotlolo morao sebakeng sa senotlolo (sheba mohato oa 1 le oa 2).
Hlokomela: Mochine oa ho notlela o tlameha ho ba o tšekaletseng sebakeng sa senotlolo
e. Lokolla boutu ea latch (L). Beha boutu ea latch e le hore leino le ka tlase la "anti-friction latch" (F) le lule le le ka har'a mokotla oa mortise joalo ka ha ho bonts'itsoe.
Hlokomela: Haeba leino la (F) le le ka ntle ho setopo, u ke ke ua khona ho kopanya sefahleho sa sefahleho holim'a setopo.
f. The mortise e lokela ho shebahala joaloka setšoantšo se ka tlase. (Sheba sebaka sa m ya boutu ya latch le latjhe e thusang.) Lekola bevel ya mortise mme o e fetole ha ho hlokeha jwalo ka ha ho hlalositswe karolong ya B-4, serapa sa 6.
B-3. Mehato e meng bakeng sa Autodeadbolt ASM ka hare ho kopano ea trim
Haeba e se e kentsoe fekthering, beha monoana o motona sebakeng se otlolohileng 'me u kenye likarolo tsohle tse' ne (4) (M) joalo ka ha ho bonts'itsoe, kopanong e ka hare ea trim.
Fetola monoana o motona ho ea ka ho le letona bakeng sa ho kenya RH (motsu ho M2 lintlha UP), kapa ho ea ka ho le letšehali bakeng sa ho kenya LH (motsu ho M2 lintlha TLAS'A). Mokotla o motona o lokela ho ema sebakeng se otlolohileng, 'me khamera e emisang (M2) e tla ba boemong bo bontšitsoeng ka tlase.
Beha li-spacers (S) tse 3 monyako (bakeng sa mefuta ea morao-rao feela). Beha kopano ea ka hare ea trim monyako e le hore li-spindle tse ka holimo le tse tlaase (F) le (G) li kenye letsoho le lehare le ka hare. Tobetsa ntlong e ka ntle u sebelisa li-screw tse tharo tsa 1/8 ″ hex head mounting screws (I).
Hlokomela: Bakeng sa mefuta ea Auto Deadbolt lekhalo pakeng tsa poleiti e ka pele ea mortise le seteraeke ha ea lokela ho feta 1/4 "
dormakaba E-PLEX® le PowerPlex 2xxx SERIES LIMITED WARRANTY
dormakaba e fana ka tumello ea hore sehlahisoa sena se se be le bofokoli linthong tse bonahalang le tšebetsong tlas'a tšebeliso e tloaelehileng le tšebeletso ka nako ea lilemo tse tharo (3). dormakaba e tla lokisa kapa e nke sebaka, ka boikhethelo ba rona, 2xxx Series Locks e fumanoeng ke tlhahlobo ea dormakaba e se na phoso nakong ena. Boikarabello ba rona feela, ebang ke tort kapa konteraka, tlasa waranti ena ke ho lokisa kapa
nka sebaka sa lihlahisoa tse khutliselitsoeng dormakaba nakong ea tiisetso ea lilemo tse tharo (3).
Tiisetso ena e sebakeng sa, eseng ka tlatsetso ho tiisetso efe kapa efe kapa maemo a mang, a hlahisoang kapa a hlalosoang, ho kenyeletsoa le thekiso e sa lekanyetsoang, ho ba le sepheo kapa ho se be teng ha mefokolo e patehileng.
HLOKOMELA: Tiisetso ena ha e akaretse mathata a hlahang ka lebaka la ho instola ka tsela e fosahetseng, bohlasoa kapa tšebeliso e mpe. Litiisetso tsohle tse boletsoeng kapa tse ngotsoeng li tla be li se na thuso haeba senotlolo se sa kengoa hantle le / kapa haeba karolo efe kapa efe ea karolo e fanoeng e nkeloa sebaka ke karolo ea kantle ho naha. Haeba senotlolo se sebelisoa ka bumper ea lebota, tiisetso ha e na thuso. Haeba ho hlokahala setopo sa monyako, re khothaletsa ho sebelisa setopo se sirelelitsoeng fatše. Tikoloho le maemo a ts'ebeliso li etsa qeto ea bophelo ba ho qeta lihlahisoa tsa dormakaba. Liqeto tsa lihlahisoa tsa dormakaba li ka fetoha ka lebaka la ho roala le ho senyeha ha tikoloho. dormakaba e ke ke ea jara boikarabello bakeng sa ho senyeha ha liphetho.
Tumello ea ho khutlisa thepa e khutlisitsoeng e ke ke ea amoheloa ntle le tumello ea pele. Linomoro tsa Tumello le Litheko tse Khutlisitsoeng (Linomoro tsa RGA) bakeng sa Letoto la 2xxx li fumaneha ka lefapha la rona la Ts'ebeletso ea Bareki Winston-Salem, NC. 800-849-8324. Nomoro ea serial ea senotlolo ea hlokahala ho fumana Nomoro ena ea RGA. Ho ntšoa ha RGA ha ho bolele hore ho tla fanoa ka mokitlane kapa phetoho. Nomoro ea RGA e tlameha ho kenyelletsoa leiboleng ea aterese ha thepa e khutlisetsoa femeng. Likarolo tsohle tsa likarolo tse kenyelletsang li-latches le li-strike (le haeba li sa sebetse) li tlameha ho kenyelletsoa ka har'a sephutheloana le khutlisetso. Thepa eohle e tlameha ho khutlisoa e lefshoa esale pele le ho pakoa hantle atereseng e bontšitsoeng.
NO POSTAGE HLOKAHALA HAEBA E ROMELETSOE KA HO THUSOA MORALI UNITED STATES
KHOEBO ARABA MAELE
TUMELO EA MAILENG EA PELE NO. 1563 WINSTON SALEM NC
POSTAGE TLA LEFWA KE ADDRESSEE
dormakaba USA, Inc.
6161 E. 75th STRETENG
INDIANAPOLIS, KA 46250
KARETE YA NGOLISISO
Re leboha ha o rekile sehlahisoa sa rona. E le ho sireletsa letsete la hao le ho re nolofalletsa ho u sebeletsa hamolemo nakong e tlang, ka kopo tlatsa karete ena ea boingoliso 'me u e khutlisetse ho dormakaba, kapa u ingolise inthaneteng ho www.dormakaba.com.
| Lebitso | |
| Boemo | |
| Khampani | |
| Aterese | |
| Motse | |
| Naha | |
| K'houtu ea Zip/Poso) | |
| Naha | |
| Mohala | |
| Lebitso la Morekisi ea Rekiloeng ho | |
| Letsatsi la ho Reka | |
| Nomoro ea Notlolo ea Mohlala |
Senotlolo sena se tla sebelisoa sebakeng sa mofuta ofe?
Mohaho oa Khoebo
Koleche/Univesithi
Sepetlele/Tlhokomelo ya Bophelo bo Botle
Indasteri / Tlhahiso
Mmuso/Sesole
Tse ling (ka kopo bolela)
Boema-fofane
Sekolo/Thuto
Ke sebaka sefe se sirelelitsoeng ka senotlolo see? (mohl. Monyako o ka Pele, Monyako o Tloaelehileng, Kamore ea Boikoetliso)
Senotlolo sena ke:
Kemiso e Ncha
Ho fetola senotlolo se tloaelehileng sa linotlolo
Ho nkela sebaka sa dormakaba Mechanical Pushbutton Lock
Ho fetola dormakaba Electronic Access Control
Ho nkela Keyless Lock ntle le dormakaba
U ithutile joang ka dormakaba Pushbutton Locks?
Papatso
Moetsi oa liloko
Tšebeliso e Fetileng
Tlhokomelo
Marang-rang / Web
Sehlopha sa Koetliso
Tšebeliso e 'ngoe
Tse ling (ka kopo bolela)
Lebaka la hau e ne e le lefe la ho reka senotlolo see?
Ke mang ea kentseng senotlolo sa hau?
Moetsi oa liloko
Tlhokomelo
Tse ding
Sheba mona haeba u ka rata tlhahisoleseling e eketsehileng mabapi le liloko tsa dormakaba.
B-4. Kenya Mortise
- Tšoaea bolelele ba ho tšoara moeling oa lemati, joalo ka ha ho laetsoe ka ho toba ho tloha ho otla. Bakeng sa ASM, axis ea ho potoloha ha molamu o lekana le molomo o tlase oa seteraeke.
- Lulakanya thempleite ho latela mola o otlolohileng oa setsi sa mortise (CL) sebakeng se lakatsehang sa motšoaro, 'me u se tepe monyako. Tšoaea likoti tsohle le li-cutouts bakeng sa setopo se moeling oa lemati 'me u tlose template.
- Fumana lihlopha tse peli tsa mela e otlolohileng holim'a thempleite e u lumellang hore u lokise boemo ba template ho itšetlehile ka bevel ea lemati. Haeba lemati le se na bevel, phutha template ka mela e tiileng. Lokisetsa lemeno le ntlha ea lemati 'me u tšoaee masoba bakeng sa senotlolo. Pheta ka lehlakoreng le leng la lemati. Haeba lemati le na le 3º bevel, mena 'me u tsamaise mola o tsoetsoeng "H" thempleiteng ka ntlha e holimo-limo ea lemati 'me u tšoaee masoba a senotlolo lehlakoreng leo la lemati. Pheta ka lehlakoreng le nang le moeli o ka tlaase o beveled u sebelisa mola o tsoetsoeng "L". Tlosa thempleite.
- Lokisetsa likheo tsa setopo moeling oa lemati u sebelisa mochini oa ho senya, router le chisel (bakeng sa litekanyo, sheba template). Netefatsa hore ho fanoe ka tumello bakeng sa likarolo tsa latch tse tsamaeang joalo ka ha ho boletsoe template.
- Cheka masoba mahlakoreng a lemati (bakeng sa litekanyo, sheba template).
Tlhokomeliso: Iphunya ka mahlakoreng a mabeli a lemati ho thibela tšenyo e sa bonahaleng - Bakeng sa ASM feela, sheba bevel ea mortise. Haeba ho hlokahala tokiso, lokolla li-screws tsa bevel (R) 'me u lokise sekhutlo sa poleiti ea mortise e ka pele ho tsamaisana le bevel ea lemati. Tiisa li-screws hape. Kenya mortise ka li-screw tse 2 (Q). Sebelisa likurufu tsa lehong bakeng sa mamati a lehong le likurufu tse entsoeng ka mochini bakeng sa mamati a tšepe. Kenya mortise faceplate (P) ka li-screw tse peli tsa 8-32 x 1/4 ″ tse fanoeng.
B-5. Kenya Kopano ea Kantle ea Matlo le ka hare ho Trim bakeng sa 2000 Series ntle le Key Override (bakeng sa E2000 Series Key Override, bona Karolo ea F)
- Kenya gasket (N) (haeba ho hlokahala) ntlong e ka ntle pele ho kopano, ho hokahanya notch ka har'a gasket le karolo ea betri.
- Kenya ntlha e kentsoeng ea square spindle (G) ka har'a lever hub e kantle ho fihlela e notleha, ka sekhutlo sa 45º. (The spindle e ka tlosoa ka ho hula ho eona, haeba e lebisitsoe ka phoso.)
- Kenya seluloana sa monoana (F) karolong e ka holimo ea ntlo e ka ntle. (E tla lula sebakeng seo.)
Hlokomela: Bakeng sa mamati a fetang 2 1/2" botenya, laela mokotla o loketseng oa hardware ho fumana bolelele bo nepahetseng ba li-spindle le li-screws tse ntseng li holisoa. - Beha ntlo ea ka ntle monyako e le hore li-spindle li kopane le li-hubs holim'a setopo.
- Karolong e ka hare ea "trim" retelletsa lever sebakeng se nepahetseng sa ho phomola bakeng sa ho fana ka lemati. Kenya setsi sa tsitsipano (L) pakeng tsa molamu (H) le poso (P).
Hlokomela: Bakeng sa mefuta ea Autodeadbolt ASM, Office le Storeroom, sheba karolo ea B-3 - Beha monoana o motona (T) sebakeng se otlolohileng. Beha li-spacers (S) tse 3 lemating (bakeng sa mefuta ea morao-rao feela) 'me u behe kopano ea ka hare ea sekoahelo monyako e le hore li-spindle tse ka holimo le tse ka tlaase (F) le (G) li kenye letsoho la letsoho le lehare la ka hare. Tobetsa ntlong e ka ntle u sebelisa li-screw tse tharo tsa 1/8 ″ hex drive mounting (I). Kenya li-screws ntle le ho tiisa. Netefatsa hore lever e ka hare le monoana oa letsoho o sebetsa butle. Haeba e se suthisa matlo a ka hare le ka ntle hanyenyane. Ebe u tiisa li-screws.
- Bokella lever holim'a matlo a ka ntle, sebakeng sa phomolo se rapameng se loketseng ho fana ka lemati. Tobetsa feela lever holim'a tube ho fihlela e tobetsa sebakeng. Haeba ho hlokahala matla a eketsehileng, sebelisa mallet a rabara. Lekola sekhomaretsi sa letsoho ka ho hula ka bohlale ho sona. (Bakeng sa liloko tse nang le linotlolo, sheba leqephe la 35)
- Libetri tse tharo tsa AA li tlameha ho se li kentsoe ka har'a sets'oants'o sa betri (C). Kenya sets'oants'o sa betri ka har'a ntlo e ka ntle 'me u se sireletse u sebelisa 6-32 x 5/16" (7.9mm) Phillips screw (H) e fanoeng.
Hlokomela: Haeba senotlolo se etsa lerata le sa khaotseng kapa mabone a LED a khubelu a sa khaotse, seta lisebelisoa tsa elektroniki bocha ka ho tlosa se ts'oereng betri ka metsotsoana e leshome ebe u se kenya hape.
B-6. Ho khutlisa Lever e ka Ntle (bakeng sa Letoto le se nang Mechanical Override)
Lever e ka khutlisetsoa morao. Haeba ho fana ho fosahetse, kenya pick e nyane kapa screwdriver e bataletseng lesobeng la hub joalo ka ha ho bonts'itsoe. Ka bonolo khutlisetsa sekotwana sa selemo ka har'a hub, 'me u tlose molamu.
B-9.Testing (E-2400 Series FEELA)
Tlhokomeliso! Etsa lits'ebetso tse latelang ka tatellano, 'me lemati le BULEKILE ntle le ha ho boletsoe ka tsela e 'ngoe.
Ka hare ho Lever:
Fetolela lehare le ka hare ho ea tlase. Bolt ea latch e hula ka botlalo.
Haeba leqhubu kapa monoana o motona o utloa o le thata (ho thata ho thinya kapa o sa khutlele habonolo sebakeng sa oona se tšekaletseng), hlahloba ho tsepama ha likonopo tsa senotlolo. Lokolla li-screws tse ntseng li hola 'me u fetole kopano ea ka hare ea trim hanyane ho fihlela fric-tion e felile. Haeba bothata bo ntse bo tsoela pele, hlahloba boemo ba masoba monyako (ho bapisoa le mortise).
Standard Deadbolt:
Fetolela monoana o motona ho ea pele le pele. The deadbolt e atolosa le ho hula ka botlalo ntle le likhohlano tse sa hlokahaleng.
Fetolela monoana o motona ho atolosa "deadbolt" hape ebe o fetola lehare le ka hare. The deadbolt le latch bolt li hula ka nako e le 'ngoe ntle le likhohlano tse sa hlokahaleng.
Boikhethelo ba Autodeadbolt:
Tobetsa 'me u tšoare boutu ea tlatsetso (X). The deadbolt (D) e tla atoloha. Boloka boutu ea tlatsetso e tepeletse, 'me u retelle lever e ka hare ho theosa le ho e ts'oara moo. Latch (L) le deadbolt lia hula hammoho.
Lokolla boutu e thusang (X), ebe u tlohella leqhubu la ka hare hore le khutlele sebakeng se tšekaletseng. The deadbolt e tla lula e khutliselitsoe morao ha latch e ntse e tsoela pele.
Kantle ho Lever:
Fetolela lehare le kantle ho ea tlase. Bolt ea latch ha e hohele morao. Haeba latch bolt e hula, netefatsa hore libeteri li kentsoe hantle. Haeba leqhubu le utloa le le thata (ho thata ho reteleha kapa le sa khutlele habonolo sebakeng sa eona se tšekaletseng), etsa bonnete ba hore spindle e sekoere ha e telele haholo kapa ha e shebane hantle.
Lenaneo
Rulahanya Lock bonyane mosebelisi a le mong ea nang le tokelo ea Privacy/Deadbolt Override, le mosebelisi a le mong ntle le tokelo ena, o sebelisa Yuniti ea Tlhokomelo ea Oracode.
Hlahisa likhoutu tse sebetsang bakeng sa basebelisi bana ba 2. (Tlhahiso: hlahisa likhoutu tse qalang letsatsi pele ho letsatsi la kajeno mme li qetella bonyane letsatsi le le leng ka mor'a letsatsi la hajoale, e le ho qoba linako tsa ho kena/ho tsoa)
Keno ea khoutu le phihlello
Ha Deadbolt/Privacy e koetsoe, kenya khoutu ea pele ho netefatsa ts'ebetso ea senotlolo se felletseng. Netefatsa hore LED e tala e benya konopong e 'ngoe le e' ngoe e hatelitsoeng le lebone le lelelele la LED qetellong ea khoutu. Fetola lera le ka ntle. Etsa bonnete ba hore bolt ea latch e hula ka botlalo. Lokolla lever, emela hore senotlolo se khutlele mokhoeng o notletsoeng (litlhophiso tsa kamehla ke metsotsoana e 5 ka mor'a ho notlolla), ebe u khutlisetsa lever hape.
Latch bolt ha ea lokela ho hulela morao ka mor'a hore senotlolo se khutlele mokhoeng oa ho notlela, eo hangata e leng metsotsoana e 5 (max 15 sec) ka mor'a ho notlolla, ntle le ho qala ka ho kenya khoutu e nepahetseng ea mosebelisi.
Pheta ka khoutu ea bobeli.
Ho fihlella ha Tšohanyetso (Deadbolt Override)
Ka mor'a lenaneo fetola monoana o motona ho ea sebakeng se okametseng ho kenya karolo ea Deadbolt / Privacy.
Deadbolt/Lekunutu e kentse letsoho, phihlello e hanetsoe: Kenya khoutu ea mosebelisi e se nang tokelo ea Deadbolt/Privacy Override. Sebakeng sa tatellano e tloaelehileng ea sesupo sa LED e nang le khanya ea LED e tala hang ha e bonts'a khoutu e nepahetseng, sena se tla lateloa ke lebone le le leng le lefubelu la LED, le bonts'ang phihlello e hanetsoeng. Fetola leqhubu le ka ntle, latch ha ea lokela ho hula. U hanetsoe ho kena. Haeba u bona feela lebone le letala la LED hanngoe le / kapa latch e hula ho ka 'na ha e-ba le bothata ka sesebelisoa sa deadbolt/Privacy, kapa mohlomong u sebelisitse khoutu e nang le Deadbolt/
Lekunutu le feta tokelo. Netefatsa boemo ba thumbturn. E lokela ho ba e otlolohileng.
Phihlello ea ts'ohanyetso: Deadbolt / Lekunutu e kenyellelitsoeng, khoutu ea mosebelisi e nang le tokelo ea ho feta, phihlello e fanoe: Kenya khoutu ea mosebelisi e nang le tokelo ea Deadbolt/ Privacy Override. U lokela ho bona tatellano e tloaelehileng ea letšoao la LED: LED e tala e bonesa hang. Fetola leqhubu le kantle, latch le li-deadbolt li hula ka nako e le 'ngoe le ka botlalo: phihlello e fanoe. Haeba u bona
LED e khubelu 'me ha ho na Latch bolt e khutlisetsoa morao, netefatsa hore khoutu e sebelisitsoeng e na le tokelo ea "deadbolt/private override" e nolofalitsoeng. Fetolela monoana o motona ho khutlela sebakeng se emeng haeba ho se joalo.
Ho sebetsa Phetolelo
Ho sebetsana le lintlha tsa bohlokoa, sheba Karolo ea H.
Hlokomela: Haeba senotlolo se ke ke sa arabela khoutu efe kapa efe, ho na le likhetho tse tharo tse lokelang ho lekoa ho bula lemati. Ka tatellano, ke:
- Netefatsa libeteri, 'me u li nkele sebaka haeba li fana ka kakaretso ea 4 Volts.
- Sebelisa tšobotsi ea elektronike (e hloka yuniti ea tlhokomelo le thapo ea puisano). Sheba tataiso ea mosebelisi ea yuniti ea tlhokomelo.3. Ikopanye le Tšehetso ea Theknoloji bakeng sa litaelo tsa ho sebelisa sebaka sa ho phunya.
Deactivation ea Deadbolt:
A. Deadbolt Deactivation by Thumbturn
Ha u ntse u eme ka har'a phaposi, koala lemati ebe u fetola monoana o motona ho atolosa "deadbolt". (Haeba senotlolo se na le mortise ea autodeadbolt, ea mohato oa B ka tlase).
Fetolela monoana o motona ho hula konopo ea letsoho. Pheta.
B. Deadbolt Deactivation by Lever
Ha u ntse u eme ka har'a phaposi, koala lemati 'me u fetole monoana o motona ho ea sebakeng se okametseng ho atolosa "deadbolt" (kapa ho khetha boinotši ho mefuta ea autodeadbolt). Bula lemati ka ho fetola lere. The deadbolt le latch bolt li hula ka nako e le 'ngoe le ka botlalo. Ela hloko khohlano efe kapa efe e feteletseng, e ka hlokang ho kenya seteraeke (sebaka sa "deadbolt" feela). Pheta.
C. TSOA MOKHOPO
C-1. LENAMO TŠA TŠEBELETSO TSA PRECISION TSOA LISEBETSI
21/22/FL21/FL22 VON DUPRIN 98/99EOF/9827/9927 EO- F/9875/9975/9847/9947 **DETEX 10/F10/20/F20 DORMA F9300 YALE 7100/7160
** Detex 10 & 20 Series ke Panic Hardware feela. (Ha e fane ka lintlha tsa mollo) Detex F10 & F20 Series ke Fire Exit Hardware (Fire Rated)
Ockset ka 'ngoe e kenyelletsa:
(A) Kantle ho lever handle
(B) Matlo a ka ntle
(C) Gasket (ha ho hlokahala)
(J) Sets'oants'o sa betri se nang le libeteri tse 3 tsa AA
Likarolo tse ka hare ho mokotla oa hardware:
(D) Li-spindle tse 1 kapa ho feta joalo ka ha li na le thepa
(E) 1 x Ka hare ho Adapter Plate
(F) 3 x Mounting Screw 12-24 1 /8” Hex
(H) 2 x Pan Head Screws 1 /4” 28 X 3 /4” bakeng sa Yale 2 kapa 4 Pan Head Screws 10-24 X 3 /4” bakeng sa Detex, Dorma, Von Duprin kapa 4 Flat Head screw 10-24 X 5 /8” bakeng sa Precision, Arrow
(K) 1 x Pan Head Screw
(Q) 2 kapa 4 Flat Washer 1/2 OD bakeng sa Detex Exit Device Feela
Mefuta e Felletseng ea Mechini FEELA:
(L) Cylinder Cap
(M) Cylinder Plug
(N) Ka ntle ho Lever Handle
(P) Cylinder (bakeng sa senotlolo sa letoto la 630 le lisilindara tse kentsoeng ka mokhoa o fapaneng FEELA)
Lisebelisoa li Hlokahala:
Likhalase tsa tšireletso
5/16" (7.9mm) drill bit 1/2" (13mm) drill bit 1" (25mm) phunya koto kapa sekoti sa lesoba
Awl kapa bohareng punch Hammer Rubber mallet Small flat flat screwdriver
Philips #2 screwdriver
Spanner screwdriver (No 6) 1 /8” Allen key E fetolehang sekwere Pencil Tape Thepa ea ho hloekisa (lesela la marotholi, vacuum) Tekanyo ea theipi
C-2. LOKISA MONYAKO WA SESEBETSI SA HO TLOHA
- Khetha template ea ho cheka ea senotlolo bakeng sa sesebelisoa sa ho tsoa se tla kopanngoa monyako.
- Tšoaea bophahamo ba motšoaro o lakatsehang moeling oa lemati. (sheba Setšoantšo sa 1)
- Tšoaea mola o otlolohileng oa backset lehlakoreng ka leng la lemati. Sheba litaelo tsa moetsi oa lisebelisoa tsa ho tsoa bakeng sa mokokotlo o nepahetseng. The backset e bontšitsoeng template ea pampiri ke ea litšupiso feela. sebelisa "backset" ea sesebelisoa sa ho tsoa.
Hlokomela: Hlompha likhoutu tsohle tse amehang tsa moaho mabapi le bophahamo ba ho ts'oaroa ha senotlolo le boemo ba bar. - Beha thempleite ea ho phunya ka har'a lemati e tsamaisanang le lets'oao la bophahamo ba lemati le lets'oao la mola o otlolohileng oa backset le mela e thempleiteng. Tšoaea lemati bakeng sa boemo ba masoba.
- Cheka masoba ho li-diameter tse boletsoeng ho litempele tsa ho cheka. Hlakola masoba monyako o hlokahalang bakeng sa sesebelisoa sa ho tsoa ho latela litaelo tsa moetsi.
Hlokomela: Koa ka mahlakoreng a mabeli a lemati ho thibela tšenyo e sa bonahaleng.
Sheba template bakeng sa boholo ba boro le botebo.
C-3. Kenya LOCK LE HO TLOHA SESEBETSI
- Kenya Mortise (haeba ho hlokahala)
Bakeng sa lisebelisoa tsa ho tsoa ka mortise, kenya mortise ho latela litaelo tsa moetsi - Kenya Lever ea Kantle
A. Kopanya leifo ntlong e ka ntle, sebakeng se otlolohileng sa ho phomola se loketseng ho tšoara lemati joalo ka ha ho bontšitsoe. Tobetsa feela lever holim'a tube ho fihlela e tobetsa sebakeng. Haeba ho hlokahala matla a mangata ho kenya letsoho, sebelisa mallet ea rabara. Lekola sekhomaretsi sa letsoho ka ho hula ka bohlale ho sona.
B. Leqhubu le ka khutlisetsoa morao. Haeba ts'ebetso e fosahetse, kenya pick e nyane kapa screwdriver e bataletseng lesobeng la hub joalo ka ha ho bonts'itsoe. Ka bonolo khutlisetsa sekotwana sa selemo ka har'a hub, 'me u tlose molamu - Kenya Libetri (Eseng bakeng sa liphetolelo tsa PowerPlex 2000) Libetri tse tharo tsa AA li tlameha ho se li kentsoe setšeng sa betri (J). Kenya sets'oants'o sa betri ntlong e ka ntle 'me u se sireletse u sebelisa 6-32 X 3/8" spanner drive screw (K).
Hlokomela: Haeba senotlolo se etsa lerata le sa khaotseng kapa mabone a mafubelu a LED a sa khaotse, seta lisebelisoa tsa elektroniki bocha ka ho tlosa se ts'oereng betri ka metsotsoana e leshome, ebe u se kenya hape. - Kenya Lock & Tsoa Sesebediswa monyako
a. Khetha SPINDLE BAG e hlokahalang ho chate ea spindle ka har'a mokotla oa Hardware ho latela MOFUTA OA HO TSOA SESEBETSI LE BOTETE BA LENYAKO.
b. Kenya ntlha e slotted ea spindle (D) ka tlung e ka ntle ho fihlela e notlela, sebakeng se nepahetseng bakeng sa sesebelisoa sa ho tsoa (sheba Fig.4). The spindle e ka ntšoa ka ho hula holim'a eona, 'me ea kenngoa hape haeba e lebisitsoe ka phoso.
c. Beha ntlo e ka ntle (B) monyako. (ka gasket (C) haeba ho hlokahala)
d. Hokela Letlapa la Adapter (E) senotlolong (B) ka ho sebelisa likurufu tsa Flat Head (F)(12-24nc).
e. Hokela Chassis ea Tsoa ka Sesebediswa (G) ho Adapter Plate (E) o sebedisa dikurufu tse 2 kapa dikurufu tse 4 (H) ho itshetlehile ka ho Tsoa Sesebediswa. Bakeng sa Detex feela, sebelisa 2 kapa 4 Flat washers (Q).
f. Netefatsa hore senotlolo le Sesebediswa sa Tsoa di hlophisitswe hantle mme o tiise dikurufu.
g. Latela litaelo tsa moetsi ho qeta ho kenya sesebelisoa sa ho tsoa le ho otla ho loketseng.
** Detex 10/20 Series ke Panic Hardware feela. (Ha e na mocheso oa mollo) Letoto la Detex F10/F20 ke lisebelisoa tse lekantsoeng ka Mollo
D. HO KENYA LEFE KA NTLE HO PHETHAHETSO E SENG EA MECHI
Bokella lever holim'a matlo a ka ntle sebakeng sa phomolo se rapameng se loketseng ho fana ka lemati.
Tobetsa feela lever holim'a tube ho fihlela e tobetsa sebakeng.
Haeba ho hlokahala matla a eketsehileng, sebelisa mallet a rabara. Lekola sekhomaretsi sa letsoho ka ho se hula ho etsa bonnete ba hore se tlamiloe ka mokhoa o sireletsehileng.
ES
Lever e ka khutlisetsoa morao. Haeba ho fana ho fosahetse, kenya pick e nyane kapa screwdriver e bataletseng lesobeng la hub joalo ka ha ho bonts'itsoe.
Ka bonolo khutlisetsa sekotwana sa selemo ka har'a hub, 'me u tlose molamu.
F. HO KENYA K-I-L KHETHO EA K-I-L KAPA TLHOKOMELISO E KA TLOSANG KA HO FETISISA LE LESOTHO LE KA NTLE
F-1 Ha e bula, ntlo ea linotlolo e nang le mochini o fetelletseng e lokela ho shebahala joalo ka setšoantšo se ka tlase ka:
- Li-indent tse nyane (i) sefapanong sa shaft e fetelletseng (m) moleng o tšekaletseng.
- Washer ea polasetiki (c) holim'a tube ea koloi
- The lever tšoasa (f) sebakeng se ka ntle
- Cylinder (j) le linotlolo tse 2 (n) (tse kenyellelitsoeng ka mokotleng oa hardware)
- Sesebelisoa sa ho fetisoa ha Shaft (o) (e kenyelelitsoe ka mokotleng oa hardware)
F-2 U sebelisa sesebelisoa sa shaft (o), fetola shaft e fetelletseng ho ea ka tatellano ho fihlela e ema e le hore li-indent tse peli tse nyane tse sefapanong joale li theohe moleng.
F-3 Sutumelletsa lever tšoasa (f) ka tieo.
F-4 Kenya silindara (j) ka har'a mofeng oa lever (h).
Hlokomela: Bakeng sa Best Removable Core, sebelisa Mehato ea F-5, F-6 le F-7, ebe u fetela ho F-10 'me u tsoele pele. Bakeng sa K-I-L Key Key, fetela pele ho F-8 'me u tsoele pele ka mokhoa o tloaelehileng.
Bakeng sa Molemo ka ho Fetisisa o Tlohang Core
F-5 Insert 6-pin Adapter e ntle ka ho fetisisa (e teteaneng) ho li-6-pin tse ka fetolehang core kapa kenya li-7-Pin Adapter e ntle ka ho fetisisa (e tšesaane) ho li-cores tse 7 tse fetolehang. Kenya adaptara ho fihlela e kopana le core e ntšitsoeng.
F-6 U sebelisa senotlolo sa taolo, bokella mantlha e ka tlosoang ka adaptara ea eona ho lever. Tlosa senotlolo sa taolo.
F-7 Kenya konopo ea phetoho ka har'a konokono e ntšoang.
Bakeng sa K-I-L Key Key
F-8 Kenya polaka ea silinda (k) ka har'a lebitla (h).
F-9 Ho etsa bonnete ba hore polaka ea silinda (k) ha e oa, kenya senotlolo ka har'a silinda (j). Senotlolo se tla ba se rapameng.
Tlhokomeliso: Boemo ba senotlolo ke ba bohlokoa haholo. Haeba leqhubu le sa bokelloe ka senotlolo sebakeng se nepahetseng pele se beha lehare holim'a ntlo, mochine o ka hare oa senotlolo o ka senyeha haeba lehare le potoloha le ho qobelloa.
F-10 Bakeng sa Li-Levers tsa Letsoho le Le letona: Fetolela senotlolo ho ea ka ho le letona ho fihlela se ema hore se be boemong bo otlolohileng 'me sinki (g) e le boemong bo ka holimo. Bakeng sa Li-Levers tsa Letsoho le Letsehali: Fetolela senotlolo ho ea ka ho le letona ho fihlela se ema hore se be boemong bo otlolohileng 'me sinki ea countersink (g) e le boemong bo tlase.
F-11 Kenya mohele (h) holim'a tube ea koloi. E lokela ho phomola hoo e ka bang 1⁄16″ (2 mm) ho tloha 'meleng oa ntlo. Haeba e sa khone ho sutumetsoa haufi le ntlo, lever catch (f) mohlomong ha e sututsoe ka hare. E sutumelletse kahare. Li-indent tse peli tse nyenyane sefapanong sa shaft ea ho feta li tlameha ho bapaloa ka ho otloloha.
F-12 Tobetsa lere ka thata kgahlanong le ntlo ha o ntse o phetla konopo ho ya ka nqa ya tshupanako (sena se sebetsa ho dinotlolo tsa Letsoho le Le letona le tsa Leqele) ho fihlela e le boemong bo tshekaletseng.
Bohlokoa: Haeba ho sa khonehe ho fetola senotlolo ho ea ka lehlakoreng la oache ho phethela mohato ona, washer ea selemo (d) e kanna ea ba thata haholo: Tlanya lever ka hloko ka rabara ho lokolla mochini o hlatsoang selemo (d). Koahela letsoho la lever ka lesela kapa lisebelisoa tse ling ho sireletsa qetello ea tšepe.
F-13 Tlosa senotlolo. Senotlolo se tla shebahala joalo ka ha se bonts'itsoe ka ho le letona.
F-14 Ka bonolo hlahloba ho potoloha ha lever handle.
E tlameha ho potoloha habonolo hoo e ka bang 45º.
Tharollo ea mathata: Haeba u bokelletse lehare le ntlo ka senotlolo sebakeng se fosahetseng, senotlolo se tla khomarela. Ho tlosa senotlolo, e fetole e le hore e be boemong bo otlolohileng 'me u kenye screwdriver e nyenyane e bataletseng ka sekoting se tlas'a lehare ho sutumelletsa lever tšoasa ka (f). Tlosa senotlolo. Haeba e ntse e tsitsitse, fetola senotlolo ho fihlela e ema sebakeng se tšekaletseng ebe o sutumelletsa Lever Catch hape ka screwdriver e nyane. Tlosa senotlolo.
Tharollo ya mathata: Senotlolo sa Letsoho le Le letona: Fetolela setshwano sa lever ho ya ka tshupanako ntle le ho se qobella. Haeba e ema hoo e ka bang 15º, e ne e sa kopanngoa hantle. U se ke ua leka ho e qobella ho reteleha - sena se tla senya mochine o ka hare oa senotlolo.
Lokolla letsoho la lever. Kenya screwdriver e nyane ka lesoba le lenyane le ka tlase ho mofeng oa lever ebe o sutumelletsa lever catch.
Etsa mehato hape karolong ea D
Senotlolo sa Letsoho le Letsehali: Fetolela sets'oants'o sa lever ho ea ka nqane ho ea oache ntle le ho qobella. Sebaka sa koloi ha sea lokela ho pota-pota ha lehare le fetoha. Haeba e etsa joalo, e ne e sa bokelloa hantle. Lokolla letsoho la lever. Kenya screwdriver e nyane ka lesoba le lenyane le ka tlase ho mofeng oa lever ebe o sutumelletsa lever catch.
Etsa mehato hape karolong ea D khahlanong le washer ea polasetiki ho tlosa papali ea lever.
F-15 U sebelisa 5/64” Allen Key, tiisa sekoti se sete ha u ntse u sututsa leru.
G. TEKO EA MOSEBETSI OA LEFERE KA NTLE
G-1 Netefatsa hore leifo le hokeletsoe ntlong ka nepo:
a. Tlosa senotlolo.
b. Kenya screwdriver e nyane e sephara ka lesobeng le ka tlase ho mofeng oa lever ebe o sutumelletsa lehare.
c. Hula ka lere. Ha ua lokela ho khona ho tlosa lever. Haeba leqhubu le tsoa ntlong, senotlolo ha se kopane hantle. Khutlela mehatong e karolong ea D 'me u phete mokhoa ona oa ho netefatsa.
G-2 Lekola Motsamao oa Lever (ntle le senotlolo ka silindara)
a. Fetola lere (h) ho ya ka tshupanako bakeng sa senotlolo sa Letsoho le Le letona kapa ho ya ka nqane ho watjhe bakeng sa senotlolo sa Leqele
b. Lokolla lehare butle-butle. E lokela ho khutlela ka bolokolohi sebakeng sa eona se tšekaletseng.
H. HO LEKOLA KOTLO EA MECHINA E HLAHALA KA PHETOHO
Bohlokoa: Key Override ka boeona ha e hule latch kapa deadbolt.
Se ke oa sebelisa matla a mangata haholo ha u phetla senotlolo kaha sena se ka senya yuniti. Ho hula latch, fetola senotlolo ho fihlela se emisa, lokolla senotlolo 'me u fetole lehare.
Hlokomela: Mochini o tlameha ho lula o le boemong bo otlolohileng ha o bulela senotlolo (u se ke ua leka ho bulela senotlolo ha u ntse u phethola lehare) kapa mochine oa ho feta o ke ke oa sebetsa.
H-1 Ntle le ho sebedisa senotlolo, fetola leifo ho ya ka tshupanako bakeng sa dinotlolo tsa Letsoho le Letshehadi kapa kgahlano le tshupanako bakeng sa dinotlolo tsa Letsoho la Leqele. Sebaka sa ka hare sa koloi ha sea lokela ho potoloha ha lehare le fetoha.
H-2 Ha lere (h) e le sebakeng se tšekaletseng, kenya senotlolo (n) ka har'a silindara 'me u e fetole ho fihlela e emisa. (Sena se sebetsa ho linotlolo tse ka ho le letona le ka ho le letšehali.)
H-3 Tlohela senotlolo, 'me hape u fetole sets'oants'o sa lever (h) ho ea ka ho le letona bakeng sa linotlolo tsa Letsoho le Le letona kapa li-counter-clockwise bakeng sa linotlolo tsa Letsoho la Leqele. Hona joale hub ea koloi e ka hare (b) e lokela ho potoloha ka tsela e ts'oanang le ea lever ha e fetoloa.
H-4 Kenya kepisi (i) ho koahela lesoba la senotlolo. Sekoahelo se na le groove e nyenyane ka lehlakoreng le le leng (ho lumella ho tlosoa habonolo). Sena se lokela ho shebana le tlase. Kenya snap e tlase ea cap ka lesoba la lever ka tlase ho silinda. Ka screw-driver e nyane, sutumelletsa cap snap fatše ha u ntse u sutumelletsa kepisi sebakeng.
H-5 Ho tlosa sekoahelo (i), kenya screwdriver e nyane e bataletseng ka har'a groove ena 'me ka bonolo u ntše cap, u hlokomele hore u se ke ua e senya. Koahela tlase ho lever ho sireletsa qetello hore e se ke ea ngolisoa ka mokhoa oa ho tlosa cap.
I. FETOHA KEY-IN-LEVER LOCK CYLINDERS
I-1 Tlosa screw sete ho lokolla leifo (feela 1/4 ho 1/2 turn).
I-2 Tlosa sekoahelo ho lever e ka ntle (h).
I-3 Kenya konopo (n).
I-4 Fetolela senotlolo ho ea ka nako ho fihlela se emisa.
I-5 Senotlolo sa ho lokolla (n).
I-6 Sebelisa screwdriver e nyane e bataletseng ho sutumelletsa lever catcher ka lesoba le ka tlase ho leqhubu le kantle.
I-7 Hula lehare le ka ntle (h) ho tloha ntlong ea linotlolo. Ela hloko hore u se ke ua lahleheloa ke polaka ea cylinder (k). Haeba ho le thata ho hula lever, tiisa hanyenyane kapa u lokolle sekoti se behiloeng
I-8 Kenya sebaka sa silindara ea khale ka e ncha ka moheleng oa lever. Ke mofuta o tšoanang feela oa silinda e nang le li-grooves tse 2 tse sefapanong qetellong ea plug ea silinda e ka sebelisoang senotlolo.
I-9 Kenya hape polaka ea silinda (k).
I-10 Ha u ntse u tšoere cylinder (j) le plug (k) sebakeng, kenya senotlolo.
I-11 Latela mehato ea F-10 ho F-14 le Test ho latela mehato ea G le H.
J. FETOHA MOHOLO-MOFUTA MOHOLO
J-1 Sebelisa senotlolo sa ho laola ho tlosa core e tlosoang ho lever
J-2 Tlosa adaptara ho tloha mokokotlong o ka tlosoang 'me u e kopanye hape holim'a motheo o mocha o tlosoang.
Tlhokomeliso: Ho bohlokoa hore konokono e ncha e ka tlosoang e be le palo e lekanang ea lithakhisa (6 kapa 7) le e theotsoeng. Haeba ho se joalo, fetola adaptara hore e lumellane le mantlha.
J-3 Hlahloba ho etsa bonnete ba hore shaft ea override ha ea ka ea sisinyeha le hore li-indent tse nyenyane tse 2 holim'a shaft e fetang e ntse e otlolohile (sheba ka tlase). Ebe, u sebelisa senotlolo sa ho laola mokokotlong o mocha, bokella motheo o mocha o ka tlosoang holim'a lever.
J-4 Lekola liloko u sebelisa Mehato ea G le H.
K. HO TLOSA LE HO HLOKOMELA LEPHATA KA NTLE
K-1 Lokolla screw sete ho lokolla lever (feela 1/4 ho 1/2 turn).
K-2 Kenya konopo ea phetoho ka har'a silindara.
K-3 Fetolela senotlolo ho fihlela se ema (bakeng sa linotlolo tsa letsoho le letona le le letšehali).
K-4 Lokolla senotlolo.
K-5 Sebelisa sekoti se senyenyane se bataletseng ho sutumelletsa lever ka lesoba le ka tlas'a lesira le kantle.
K-6 Hula lehare le kantle ho ntlo ea senotlolo. Hlokomela hore u se ke ua lahleheloa ke adaptara.
Bohlokoa: Kopanya leifo, silinda le linotlolo pele o manamisa yuniti kaofela monyako.
K-7 Netefatsa hore li-indent tse peli tse nyane tse sefapanong li hona li theohile moleng. (Sesebelisoa sa cylinder kapa override shaft se ka sebelisoa ho fetola shaft e fetang.)
K-8 Sututsa ka lever tšoasa (f) ka tieo.
L. HO KENYA LIBUMPI TSA RUBBER
L-1 Koala lemati 'me u sebelise khatello ho etsa bonnete ba hore "deadlatch" (a) e lutse holim'a poleiti ea ho otla (b) joalokaha ho bontšitsoe. Ha u eme holim'a foreimi (setopo sa monyako) lehlakoreng la lemati, hlahloba likheo pakeng tsa lemati le foreimi mahlakoreng a mararo a foreimi (ka ho le letšehali, ka ho le letona le ka holimo).
L-2 Tšoaea libaka tseo likheo li ka bang 3⁄16″ (5 mm). Etsa bonnete ba hore libaka tsena ha li na mafura le lerole. Ebola li-bumpers (c) ho tloha mokokotlong oa tsona oa tšireletso ntle le ho ama bokaholimo ba sekhomaretsi 'me u li khomarele libakeng tse tšoailoeng.
Hlokomela: Lumella lihora tse 24 hore sekhomaretsi se behe pele ho tlhahlobo. Lemati le ka sebetsoa ka mokhoa o tloaelehileng nakong ena.
M. HO KENYA PHEKO EA BETHER
(Eseng bakeng sa Liphetolelo tsa PowerPlex 2000)
Tlhokomeliso: Haeba senotlolo se etsa lerata le sa khaotseng kapa mabone a LED a khubelu a sa khaotse, seta lisebelisoa tsa elektroniki bocha ka ho tlosa se ts'oereng betri ka metsotsoana e leshome, ebe u se kenya hape.
M-1 Libetri tse tharo tsa AA li tlameha ho se li kentsoe setšeng sa betri (q).
M-2 Kenya sets'oants'o sa betri ka har'a ntlo e ka ntle 'me u se sireletse u sebelisa 6-32 x 5⁄16″ (8 mm) screw (r).
N. LEKOLA MOSEBETSI OA LOKO
N-1 Fetola ka har'a lepi 'me u tšoare. Netefatsa hore latch e hohlotsoe ka botlalo 'me e hula ka sefahleho sa latch. Lokolla lehare le ka hare; latch e lokela ho atolosoa ka ho feletseng.
N-2 Bakeng sa PowerPlex 2000 o hloka ho kenya lever ea kantle makhetlo a 3 ho isa ho a 4 ho matlafatsa senotlolo pele ho nako.
N-3 Kenya motsoako oa feme: 1,2,3,4,5,6,7,8. U lokela ho bona lebone le letala 'me u utloe molumo o phahameng ha o tobetsa konopo ka' ngoe.
Ha senotlolo se buleha, u tla utloa molumo oa enjene ea elektroniki hakhutšoanyane. Fetola lehare le ka ntle 'me u tšoare. Netefatsa hore latch e hohlotsoe ka botlalo 'me e hula ka sefahleho sa latch. Lokolla lehare le ka ntle; latch e lokela ho atolosoa ka ho feletseng. Ha senotlolo se notlela hape, u tla boela u utloe mot kapa.
N-4 Haeba sehlahisoa sa hau e le E24xx, u tla tlameha ho hlahisa khoutu ea phihlello u sebelisa web sesebelisoa sa ho leka ts'ebetso ea senotlolo.
N-5 Ha lemati le butsoe, netefatsa tšebetso ea Key Override ea mochini joalo ka ha ho hlalositsoe Karolong ea F.
dormakaba USA Inc.
6161 E. 75th Street
Indianapolis, IN 46250 USA
T: 855-365-2707
Dormakaba Canada Inc.
7301 Decarie Blvd
Montreal QC Canada H4P 2G7
T: 888-539-7226
www.dormakaba.us
E-PLEX 2000 & POWERPLEX 2000 Tataiso ea ho Kenya
KD10113-E-1121
Litokomane / Lisebelisoa
 |
dormakaba 2000 Power Plex Access Data System [pdf] Buka ea Taelo 2000 Power Plex Access Data System, 2000, Power Plex Access Data System, Plex Access Data System, Access Data System, Data System, System |
