DELTA DVP04DA-H2 Bukana ea Tataiso ea Analog Output Module

Litaba pata

1 DELTA DVP04DA-H2 Analoge Output module

2 Selelekela

3 Litlhaloso

4 Lintlha Tse Ling

5 Control Registers

6 Ho fetola D/A Phetoho Curve

7 Litokomane / Lisebelisoa

7.1 Litšupiso

8 Related Posts

DELTA DVP04DA-H2 Analoge Output module

Tlhokomediso

DVP04DA-H2 ke sesebelisoa sa OPEN-TYPE. E lokela ho kenngoa ka k'haboteng ea taolo e se nang lerōle le tsamaisoang ke moea, mongobo, ts'oaetso ea motlakase le ho thothomela. Ho thibela basebetsi bao e seng ba tlhokomelo ho sebetsa DVP04DA-H2, kapa ho thibela kotsi hore e senye DVP04DA-H2, khabinete ea taolo eo DVP04DA-H2 e kentsoeng ho eona e lokela ho ba le tšireletso. Bakeng sa mohlalaample, khabinete ea taolo eo ho eona DVP04DA-H2 e kentsoeng e ka notleloa ka sesebelisoa kapa senotlolo se khethehileng.

U SE KE UA hokela motlakase oa AC ho litheminale life kapa life tsa I/O, ho seng joalo tšenyo e kholo e ka hlaha. Ka kopo, sheba lithapo tsohle hape pele DVP04DA-H2 e ka sebelisoa. Kamora hore DVP04DA-H2 e khaotsoe, U SE KE UA ama litheminale life kapa life ka motsotso. Etsa bonnete ba hore terminal ea fatše ho DVP04DA-H2 e thehiloe ka nepo molemong oa ho thibela tšitiso ea motlakase.

Selelekela

Tlhaloso ea Mohlala & Peripherals
- Kea leboha ha u khethile Delta DVP series PLC. Lintlha tse ho DVP04DA-H2 li ka baloa kapa tsa ngoloa ho FROM/TO litaelo tse fanoeng ke lenaneo la DVP-EH2 series MPU. Mojule oa tlhahiso ea analog o amohela lihlopha tse 4 tsa data ea dijithale ea 12-bit ho tsoa ho PLC MPU mme e fetolela data hore e be lintlha tse 4 tsa matšoao a analog bakeng sa tlhahiso ho vol.tage kapa hona joale.
- O ka khetha voltage kapa tlhahiso ea hona joale ka wiring. Range of voltage tlhahiso: 0V ~ + 10V DC (qeto: 2.5mV). Mefuta e mengata ea tlhahiso ea hona joale: 0mA ~ 20mA (qeto: 5μA).

Sehlahisoa Profile (Lipontšo, Thibelo ea Seteishene, Litheminale tsa I/O)

Seporo sa DIN (35mm)

Khokahano ea likhokahano bakeng sa li-module tsa katoloso
Lebitso la mohlala

MATLA, PHOSO, D/A sesupo
Sekoto sa seporo sa DIN

Litheminale
Mokoti o ntseng o phahama

Li-terminals tsa I/O
Ho kenya port bakeng sa li-module tsa katoloso

Wiring ea kantle

Tlhokomeliso 1: Ha o etsa tlhahiso ea analog, ka kopo arola lithapo tse ling tsa motlakase.

Tlhokomeliso 2: Haeba maqhubu a setsing sa ho kenya se kentsoeng a le bohlokoa haholo hoo a bakang tšitiso ea lerata holim'a mohala, hokela mohala ho 0.1 ~ 0.47μF 25V capacitor.
Tlhokomeliso 3: Ka kopo, hokela terminal ho li-module tsa matla le DVP04DA-H2 ho ea sebakeng sa lefats'e sa sistimi ebe o theola khokahano ea sistimi kapa o e hokahanya le sekoaelo sa khabinete ea kabo ea matla.

Tlhokomeliso 4: Haeba ho na le lerata le lengata, ka kopo, hokela terminal FG ho theminale ea fatše.
Tlhokomeliso: U SE KE UA hokela litheminale tse se nang letho .

Litlhaloso

Mojule oa Digital/Analog (4D/A).	Moqtagtlhahiso	Sephetho sa hajoale
Phepelo ea motlakase voltage	24V DC (20.4V DC ~ 28.8V DC) (-15% ~ +20%)
Kanale ea tlhahiso ea analoge	Likanale tse 4/mojule
Lethathamo la lihlahisoa tsa analoge	0 ~ 10V	0 ~ 20mA
Lethathamo la data ea dijithale	0 ~ 4,000	0 ~ 4,000
Qeto	12 bits (1LSB = 2.5mV)	12 likotoana (1LSB = 5μA)
Boiphetetso ba sephetho	0.5Ω kapa ka tlase
Ho nepahala ka kakaretso	±0.5% ha e le ka tekanyo e felletseng (25°C, 77°F) ± 1% ha ka tekanyo e feletseng ka har'a mefuta e fapaneng ea 0 ~ 55°C, 32 ~ 131°F
Nako ea ho arabela	3ms × palo ea likanale
Max. tlhahiso jwale	10mA (1KΩ ~ 2MΩ)	–
Ho mamella boima bo mamellehang	–	0 ~ 500Ω
Sebopeho sa data ea dijithale	Li-bits tse 11 ho tse 16 li fumaneha; ka tlatsetso ea 2.
Ho behwa ka thoko	Li-terminals tsa ka hare tsa potoloho le li-analog li arotsoe ke optical coupler. Ha ho khethollo har'a likanale tsa analog.
Tshireletso	Moqtagtlhahiso ea e e sirelelitsoe ke potoloho e khutšoanyane. Potoloho e khuts'oane e tšoarellang nako e telele haholo e ka baka tšenyo ho lipotoloho tse kahare. Sephetho sa hona joale se ka ba potoloho e bulehileng.
Mokhoa oa puisano (RS-485)	E tšehelitsoe, ho kenyelletsa le mokhoa oa ASCII/RTU. Sebopeho sa puisano sa kamehla: 9600, 7, E, 1, ASCII; sheba CR#32 bakeng sa lintlha tse mabapi le mokhoa oa puisano. Tlhokomeliso1: RS-485 e ke ke ea sebelisoa ha e hokahane le li-PLC tsa CPU. Tlhokomeliso2: Sebelisa wizate ea mojule oa katoloso ho ISPSoft ho batla kapa ho fetola rejisetara ea taolo (CR) ka har'a dimojule.
Ha e hokahane le DVP-PLC MPU ka letoto	Li-module li baloa ho tloha ho 0 ho isa ho 7 ka bohole ho tloha ho MPU. No.0 ke eona e haufi le MPU 'me No.7 ke eona e hole. Boholo ba li-module tse 8 bo lumelloa ho hokela MPU 'me li ke ke tsa nka lintlha tsa I/O tsa dijithale.

Lintlha Tse Ling

Phepelo ea motlakase
Max. rated tshebediso ya matla	24V DC (20.4V DC ~ 28.8V DC) (-15% ~ +20%), 4.5W, e fanoang ke matla a ka ntle.
Tikoloho
Tshebetso/bobolokelo Ho thothomela/ho thothomela	Tšebetso: 0 ° C ~ 55 ° C (mocheso); 5 ~ 95% (mongobo); tšilafalo tekanyo 2 Storage: -25°C ~ 70°C (mocheso); 5 ~ 95% (mongobo)
	Litekanyetso tsa machaba: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea)

Control Registers

CR RS-485

# paramethara E hlophisitsoe

Ngolisa litaba

b15

b14

b13

b12

b11

b10

aterese

H'4032

○

Lebitso la mohlala

E thehiloe ke sistimi. DVP04DA-H2 ea mohlala khoutu = H'6401.

Mosebelisi a ka bala lebitso la mohlala ho tsoa lenaneong mme a bone hore na mojule oa katoloso o teng.

H'4033

○

R/W

Litlhophiso tsa mokhoa oa ho tsoa

Reserved

CH4

CH3

CH2

CH1

Mokhoa oa ho tsoa: Ea kamehla = H'0000 Mokhoa oa 0: Moqtage sephetho (0V ~ 10V) Mode 1: Moqtagtlhahiso ea e (2V ~ 10V)

Mokhoa oa 2: Sephetho sa hajoale (4mA ~ 20mA)

Mokhoa oa 3: Sephetho sa hajoale (0mA ~ 20mA)

CR#1: Mokhoa oa ho sebetsa oa likanale tse 'nè mojuleng oa ho kenya analoge. Ho na le mekhoa e 4 bakeng sa kanale ka 'ngoe e ka hlophisoang ka thoko. Bakeng sa mohlalaample, haeba mosebeletsi a hloka ho theha CH1: mokhoa oa 0 (b2 ~ b0 = 000); CH2: mode 1 (b5 ~ b3 = 001), CH3: mode 2 (b8 ~ b6 = 010) le CH4: mode 3 (b11 ~ b9 = 011), CR#1 e tlameha ho hlongoa e le H'000A le ea holimo. likotoana (b12 ~

b15) e tlameha ho bolokoa. Boleng ba kamehla = H'0000.

H'4038

╳

R/W

CH1 boleng ba tlhahiso

Lethathamo la boleng ba tlhahiso ho CH1 ~ CH4: K0 ~ K4,000 Kamehla = K0 (yuniti: LSB)

H'4039

╳

R/W

CH2 boleng ba tlhahiso

H'403A

╳

R/W

CH3 boleng ba tlhahiso

H'403B

╳

R/W

CH4 boleng ba tlhahiso

#18

H'4044

○

R/W

Boleng bo fetotsoeng ba OFFSET ba CH1

Mefuta e fapaneng ea OFFSET ho CH1 ~ CH4: K-2,000 ~ K2,000

Ka mehla = K0 (yuniti: LSB)

Phetolelo e ka fetolehangtage-range: -2,000 LSB ~ +2,000 LSB

Sebaka se feto-fetohang sa hajoale: -2,000 LSB ~ +2,000 LSB

Tlhokomeliso: Ha u fetola CR#1, OFFSET e fetotsoeng e fetoloa hore e be ea kamehla.

#19

H'4045

○

R/W

Boleng bo fetotsoeng ba OFFSET ba CH2

#20

H'4046

○

R/W

Boleng bo fetotsoeng ba OFFSET ba CH3

#21

H'4047

○

R/W

Boleng bo fetotsoeng ba OFFSET ba CH4

#24

H'404A

○

R/W

Boleng bo fetotsoeng ba GAIN ba CH1

Phaello ea FUMANO ho CH1 ~ CH4: K0 ~ K4,000 Ea kamehla = K2,000 (yuniti: LSB)

Phetolelo e ka fetolehangtage-range: 0 LSB ~ +4,000 LSB

Sebaka se feto-fetohang sa hajoale: 0 LSB ~ +4,000 LSB

Tlhokomeliso: Ha u fetola CR#1, GAIN e fetotsoeng e fetoloa hore e be ea kamehla.

#25

H'404B

○

R/W

Boleng bo fetotsoeng ba GAIN ba CH2

#26

H'404C

○

R/W

Boleng bo fetotsoeng ba GAIN ba CH3

#27

H'404D

○

R/W

Boleng bo fetotsoeng ba GAIN ba CH4

CR#18 ~ CR#27: Ka kopo hlokomela hore: GAIN value – OFFSET value = +400LSB ~ +6,000 LSB (voltage kapa hona joale). Ha GAIN - OFFSET e le nyane (moepa o oblique), qeto ea lets'oao la tlhahiso e tla ba ntle mme phapang ea boleng ba dijithale e tla ba kholo. Ha GAIN - OFFSET e le kholo (e butle butle e oblique), qeto ea lets'oao la tlhahiso e tla ba thata le ho fapana holima

boleng ba dijithale bo tla ba nyane.

#30	H'4050	╳	R	Boemo ba phoso	Ngodisa bakeng sa ho boloka maemo ohle a phoso. Sheba lethathamo la boemo ba phoso bakeng sa lintlha tse ling.
CR#30: Boemo ba phoso (Sheba tafole e ka tlase) *Hlokomela:* Boemo bo bong le bo bong ba phoso bo khethoa ke karolo e lumellanang (b0 ~ b7) mme ho ka ba le liphoso tse fetang 2 tse etsahalang ka nako e le 'ngoe. 0 = e tloaelehileng; 1 = phoso. *ExampLe:* Haeba tlhahiso ea dijithale e feta 4,000, phoso (K2) e tla etsahala. Haeba tlhahiso ea analoge e feta 10V, ka bobeli phoso ea boleng ba analoge ea K2 le K32 e tla etsahala.
#31	H'4051	○	R/W	Aterese ea puisano	Bakeng sa ho theha aterese ea puisano ea RS-485. Range: 01 ~ 254. Default = K1
#32	H'4052	○	R/W	Sebopeho sa puisano	6 lebelo la puisano: 4,800 bps / 9,600 bps / 19,200 bps / 38,400 bps / 57,600 bps / 115,200 bps. Mefuta ea data e kenyelletsa: ASCII: 7, E, 1/ 7,O,1 / 8,E,1 / 8,O,1 / 8,N,1 / 7,E,2 / 7,O,2 / 7,N,2 / 8,E,2 / 8,O,2 / 8,N,2 RTU: 8, E, 1 / 8,O,1 / 8,N,1 / 8,E,2 / 8,O,2 / 8,N,2 Kamehla: ASCII,9600,7,E,1（CR #32=H'0002) Ka kopo sheba ✽CR#32 botlaaseng ba leqephe bakeng sa lintlha tse ling.
#33	H'4053	○	R/W	Khutlela ho ea kamehla; OFFSET/GAIN tuning tumello	Reserved	CH4	CH3	CH2	CH1
					Kamehla = H'0000. Nka litlhophiso tsa CH1 mohlalaampLe: 1. Ha b0 = 0, mosebedisi o lumelloa ho tune CR#18 (OFFSET) le CR#24 (GAIN) ea CH1. Ha b0 = 1, mosebelisi ha a lumelloe ho etsa CR#18 (OFFSET) le CR#24 (GAIN) ea CH1. 2. b1 e emetse hore na lirekoto tsa tokiso tsa OFFSET/GAIN li lache. b1 = 0 (ea kamehla, e latched); b1 = 1 (e sa latched). 3. Ha b2 = 1, litlhophiso tsohle li tla khutlela ho litekanyetso tsa kamehla. (ntle le CR#31, CR#32)
CR#33: Bakeng sa tumello ea mesebetsi e meng ea ka hare, mohlala, OFFSET/GAIN tuning. Mosebetsi oa latched o tla boloka setlankana sa tlhahiso memoring ya ka hare pele motlakase o kgaolwa.
#34	H'4054	○	R	Mofuta oa Firmware	E bonts'a mofuta oa hajoale oa firmware Ho hex; mohlala, mofuta oa 1.0A o bontšitsoe e le H'010A.
#35 ~ #48					Bakeng sa tšebeliso ea tsamaiso.
Matšoao: ○ : E lahliloe (ha e ngoloa ka puisano ea RS-485); ╳: Ha e latched; R: E khona ho bala data ka ho FROM taeo kapa puisano ea RS-485; W: E khona ho ngola lintlha ka taelo ea TO kapa puisano ea RS-485. LSB (Bonyane bo Bonyenyane): Bakeng sa voltagtlhahiso ea e: 1LSB = 10V/4,000 = 2.5mV. Bakeng sa tlhahiso ea hona joale: 1LSB = 20mA/4,000 = 5μA.

Seta Botjha Mojule (Firmware V4.06 kapa ka holimo): Ha o se o hokelelitse matla a kantle a 24V, ngola khoutu ea ho seta botjha H'4352 ho CR#0, ebe o hakolla le ho qala bocha ho phethela ho seta.
CR#32 Tlhophiso ea Sebopeho sa Puisano:
- Firmware V4.04 (le tlase): Sebopeho sa data (b11~b8) ha se fumanehe, sebopeho sa ASCII ke 7, E, 1 (khoutu H'00xx), sebopeho sa RTU ke 8, E, 1 (khoutu H'C0xx/H'80xx).
- Firmware V4.05 (le holimo): Sheba tafole e latelang bakeng sa ho seta. Bakeng sa mokhoa o mocha oa puisano, ka kopo ela hloko hore li-module ho khoutu ea litlhophiso tsa mantlha H'C0xx/H'80xx ke ho 8E1 bakeng sa RTU.

b15 ~ b12		b11 ~ b8				b7 ~ b0
ASCII/RTU & Phapanyetsano e Phahameng/E tlase ea Bit ea CRC		Sebopeho sa data				Lebelo la Puisano
Tlhaloso
H'0	ASCII	H'0	7,E,1*1	H'6	7,E,2*1	H'01	4800 bps
H'8	RTU, Ha ho na Phapanyetsano e Phahameng / e tlase ea CRC	H'1	8,E,1	H'7	8,E,2	H'02	9600 bps
H'8	RTU, Ha ho na Phapanyetsano e Phahameng / e tlase ea CRC	H'2	–	H'8	7,N,2*1	H'04	19200 bps
H'C	RTU, Phapanyetsano e Phahameng / e tlase ea CRC	H'3	8,N,1	H'9	8,N,2	H'08	38400 bps
		H'4	7,O,1*1	H'A	7,O,2*1	H'10	57600 bps
		H'5	8.O,1	H'B	8,o,2	H'20	115200 bps

Mohlala: Ho seta 8N1 bakeng sa RTU (High/Low Bit Exchange of CRC), lebelo la puisano ke 57600 bps, ngola H'C310 ho CR #32.
Ela hloko *1. E tšehetsa mokhoa oa ASCII FEELA.
CR#0 ~ CR#34: Liaterese tse tsamaellanang tsa paramethara H'4032 ~ H'4054 ke tsa basebelisi ho bala / ho ngola data ka puisano ea RS-485. Ha o sebelisa RS-485, mosebelisi o tlameha ho arola module le MPU pele.

Mosebetsi: H'03 (bala lintlha tsa ngoliso); H'06 (ngola datum ea lentsoe le le leng ho ngolisa); H'1 (ngola lintlha tse ngata tsa mantsoe ho ngolisa).