Daviteq WS433-MA Wireless Current Input
Tlhahisoleseding ya Sehlahiswa
- Lebitso la Sehlahiswa: Sensor e se nang Waele 0-20mA Kenyo ea Hona Joale WS433-MA
- SKU: WS433-MA
- Hardware Version: 2.5
- Mofuta oa Firmware: 5.0
- Lintlha tsa Khoutu: WS433-MA-21, WS433-MA-31
Selelekela
The Wireless Sensor 0-20mA Current Input WS433-MA ke sesebelisoa se sebelisetsoang ho lekanya 0-20mA DC hona joale ho tloha lisebelisoa tsa ts'ebetso tse kang li-transmitters tsa khatello, li-transmitters tsa mocheso, li-level transmitters, li-flow meters, le li-analyzers. E sebetsa ka lebelo le tlase haholotage theoha mme e ka hlophisoa u le hole le sethala sa Globiots kapa ka software ea Modbus RTU. Module o se nang mohala o tsamaisoa ke betri e le 'ngoe ea AA mme e ka tšoarella ho fihlela lilemo tse 10.
Litlhaloso
- Metharo ea ho lekanya: 0-20mA DC ea hona joale
- Ho nepahala: Ha ea hlalosoa
- Qeto: Ha ea hlalosoa
- Temperature Drift: Ha ea hlalosoa
- Khokelo ea Motlakase: Mohokahanyi oa M12-Monna
- Lisebelisoa tseo u ka li khethang: Ha ea hlalosoa
- Lebelo la Boitsebiso: Ha ea hlalosoa
- Sebaka sa Phetiso (LOS): Ha ea hlalosoa
- Antenna: Ha ea hlalosoa
- Betri: AA 1.5VDC
- Frequency Band: Ha ea hlalosoa
- Ho Fumana Kutlo: Ha ea hlalosoa
- Tumellano ea Machabeng: Ha ea hlalosoa
- Maemo a Tšireletso: Ha ea hlalosoa
- Mocheso oa ho sebetsa oa PCB: Ha ea hlalosoa
- Bolulo: IP67
Tokomane ena e sebelisoa bakeng sa lihlahisoa tse latelang
| SKU | WS433-MA | HW Ver. | 2.5 | FW Ver. | 5.0 |
| Ntho Code | WS433-MA-21 | Wireless Sensor 1-channel 0-20mA DC ea hona joale, IP67, betri AA 1.5VDC, 15VDC Output bakeng sa phepelo ea matla a lisebelisoa, M12-Male Connector | |||
| WS433-MA-31 | Wireless Sensor 1-channel 0-20mA DC ea hona joale, IP67, betri AA 1.5VDC, 24VDC Output bakeng sa phepelo ea matla a lisebelisoa, M12-Male Connector | ||||
Mesebetsi Fetola Log
| HW Ver. | FW Ver. | Letsatsi la ho nšoa | Mesebetsi Fetola |
| 2.5 | 5.0 | DEC-2019 | Fetola sekhahla sa data sa RF ka konopo |
Selelekela
Sensor e se nang mohala e nang le kanale e le 'ngoe ea ho lekanya 0-20mA DC ea hajoale ho tsoa ho lisebelisoa tsa Ts'ebetso joalo ka Pressure transmitter, Temperature transmitter, Level transmitter, Flow metres, Analyzers ... ka matla a tlase haholo.tage theoha. E lokiselitsoe likarolo tsa ts'ebetso joalo ka nako ea ho romella data, potoloho ea tlhahlobo ea bophelo ... ho tloha sethaleng sa Globiots kapa ka software ea ModbusRTU. Module e se nang mohala e ka nka lilemo tse 10 ka betri e le 'ngoe ea AA.
Tlhaloso
| Lekhalo la ho lekanya | 0 .. 20mA |
| Ho nepahala | 0.05% ea nako |
| Qeto | 1/3000 |
| Ho hoholeha ha mocheso | <50ppm |
| Khokelo ea motlakase | thapo e sirelelitsoeng bolelele ba 0.5m e nang le tšoelesa ea thapo ea PG9 |
| Lisebelisoa tsa boikhethelo | 304SS Adapter PG9/male 1/2″NPT kapa PG13.5 kapa M20 ho lumella ho kenya ka kotloloho lisebelisoa tsa Ts'ebetso kapa phanele ea motlakase. |
|
Lebelo la data |
Ho fihlela ho 50kbps |
| Sebaka sa phetiso, LOS | 500m |
| Antenna | Antenna ea ka hare, 3 dbi |
| Betri | 01 x AA 1.5VDC, ho fihlela ts'ebetsong ea lilemo tse 10, ho itšetlehile ka tlhophiso |
| Frequency Band | ISM 433Mhz, thekenoloji ea Sub-GHz e tsoang Texas Instrument, USA |
| Ho Fumana Kutlo | -110dBm ho 50kbps |
| Tumellano ea Machaba | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) |
| Maemo a Tšireletso | AES-128 |
| Mocheso o sebetsang oa PCB | -40oC..+60oC (ka AA L91 Energizer) |
| Matlo | Poly-carbonate, IP67 |
| Mokhoa oa ho kenya | Bracket ea mofuta oa L SUS304, ka li-screw tsa M4 kapa tepi ea 3M e mahlakoreng a mabeli (e kenyelelitsoe) |
| Litekanyo tsa lihlahisoa | 125x30x30mm |
| Net boima (ntle le betri) | <100g |
| Bophahamo ba lebokose | 190x50x50mm |
| Boima bo felletseng | 140g |
Lisebelisoa tse Tloaelehileng
MOKHOA OA SEBELE OA SEPHIRI SA SEBELE KHOKANO LE 4-20mA LITLOAELETSO
KHOKELA LISENSO TSE SA FILENG HO PLC efe kapa efe kapa HMI
KHOKELA LISENSO TSE SA FILENG HO SCADA efe kapa efe kapa 10T Platform
KHOPALA LISENSI TSE SE NANG LE MAHALA HO GLOBIOTS Platform
LITŠOANTŠISO TSA TŠEBELETSO EA WS433-MA SENSOR
(Yuniti: limilimithara)
KARTON LEbokose LA MOSEBETSI OA MOSEBETSI
Molao-motheo oa Ts'ebetso
Mokhoa oa ho lekanya
Ha sensor sampNako ea nako e fihlile, mohlalaampKa metsotso e 2, node e tla tsoha ebe e bulela phepelo ea motlakase ho fana ka matla ho sensor ea kantle ho qala tekanyo. Ho ipapisitse le mofuta le sebopeho sa sensor ea kantle, sensor e tla nka nako e itseng ho qeta tekanyo.
Bakeng sa mohlalaampLe: nako ea ho lekanya ke 200mS, ka mor'a nako ena, node e tla bala boleng ba sensor e sebelisang I2C, node e tla fetola OFF matla a motlakase ho sensor ea ka ntle ho boloka matla.
Hang ha o bala boleng ba sensor, data e tala ke X, e ka fetisetsoa boleng bofe kapa bofe ba boenjiniere ka foromo e latelang:
- Y = AX + b
Hokae
- X: boleng bo tala bo tsoang ho sensor
- Y: boleng bo baloang bakeng sa boleng ba paramethara 1 kapa boleng ba paramethara 2
- a: kamehla (boleng ba kamehla ke 1)
- b: kamehla (boleng ba kamehla ke 0)
Kahoo, haeba ho se na tlhophiso ea mosebelisi bakeng sa a le b ==> Y = X
Theko ea Y e tla bapisoa le Lo le Hi threshold.
Bakeng sa mohlalaampLe 1: Re hloka ho lekanya sensor ea mA ho 4-20mA. Ha re beha sensor ho 4mA le 20mA, re tla ba le:
Theko e tala ea X1 ADC e lekantsoeng ho 4 mA (Y1 boleng) CO2 ke 605, 'me boleng ba X2 ADC ho 20 mA (Y2 value) ke 3005. Joale:
- Sebelisa sesebelisoa sa tlhophiso ea offline ho lokisa sensor. Ngola ho sensor parametersa 1 le b1.
Boemo ba li-byte tsa Node ea sensor
Hi-Byte ke khoutu ea phoso
| Phoso khoutu | Tlhaloso |
| 0 | Ha ho phoso |
| 1 | Feela fapanyetsana mochine oa sensor empa node ha e so tsosolosoe ==> ka kopo ntša betri bakeng sa 20s ebe u e kenya hape ho tsosolosa node ho lemoha mochine o mocha oa sensor. |
| 2 | Phoso, boema-kepe ba sensor M12F bo khutsufalitsoe ho GND |
| 3 | Phoso, boema-kepe ba sensor M12F bo khutsufalitsoe ho Vcc |
| 4 | Phoso, boema-kepe ba sensor M12F bo khutsufalitse bo bong |
Lo-Byte ke mofuta oa sensor
| Phoso khoutu | Tlhaloso |
| 0 | Ha ho phoso |
| 1 | Feela fapanyetsana mochine oa sensor empa node ha e so tsosolosoe ==> ka kopo ntša betri bakeng sa 20s ebe u e kenya hape ho tsosolosa node ho lemoha mochine o mocha oa sensor. |
| 2 | Phoso, boema-kepe ba sensor M12F bo khutsufalitsoe ho GND |
| 3 | Phoso, boema-kepe ba sensor M12F bo khutsufalitsoe ho Vcc |
| 4 | Phoso, boema-kepe ba sensor M12F bo khutsufalitse bo bong |
Litaba: Sheba Karolo ea 5.4 bakeng sa lintlha tse ling.
Kenya node ea li-sensor ho Co-ordinator WS433-CL
Kenya Sensor Node ID ka bo eona
Mohato oa 1: Kamora ho fana ka matla ho Mohokahanyi ka sehokelo sa M12, Node ID e tlameha ho ngolisoa nakong ea metsotso ea pele ea 5, ho fihlela ho 40 WS.
Mohato oa 2: Atametsa sensor e se nang mohala haufi le antenna ea Co-ordinator ebe o tlosa betri ea sensor e se nang mohala, emela 5s ebe o kenya betri hape. Haeba:
- Buzzer e bapala molumo o le mong oa peep, LED blink 1 nako, ho bolelang ho ngolisa Node ID ho Co-ordinators ntle le katleho.
- Buzzer e bapala melumo ea 2 peep, LED blink makhetlo a 2, hore ID ena ea Node e se e ngolisitsoe.
Haeba o sa utloe molumo oa "Peep", ka kopo khaola motlakase oa mohokahanyi, ema metsotso e seng mekae ebe o leka hape.
Node id e kenyellelitsoeng ka tsela ena e tla ngolloa atereseng e nyane haholo ea node_id_n e leng = 0.
Beha Rssi_threshold (sheba RF MODE CONFIG (ho Modbus Memmap ea WS433-CL), kamehla -25): Nyeoe haeba Mohokahanyi a le maemong a holimo mme a hloka ho eketsa sensor ea node. Re beha sensor haufi ka hohle kamoo ho ka khonehang mme re beha Rssi_threshold ho -80, -90 kapa -100 ho eketsa kutloisiso ea ho lumella WS433-CL-04 ho eketsa li-sensor hole hole. Ka mor'a moo, etsa mehato e 'meli ea ho eketsa li-sensor ebe u tsosolosa Rssi_threshold = -2.
Enb_auto_add_sensors configuration (sheba RF MODE CONFIG (ho Modbus Memmap of WS433-CL)): Haeba u sa batle ho tima matla a WS433-CL, u ka seta Enb_auto_add_sensors = 1, ka tsela ena re na le metsotso e 5 ho kenya li-node. (eketsa ho fihla ho 40 nodes). Ka mor'a metsotso e 5 Enb_auto_add_sensors e tla iketsetsa = 0.
Bangolisi ba Memmap
- U ka khoasolla Modbus Memmap ea WS433-CL ka sehokelo se latelang: https://filerun.daviteq.com/wl/?id=WBbGm89AToHWyvIyMOc780N1KmjfUr3Y
Kenya node ea sensor ho WS433-CL-04 (1) ka WS433-CL-04 (2) le Modbus ea mahareng.
Haeba sensor e hloka ho kenyelletsoa ho WS433-CL-04 (1) e kentsoe sebakeng se phahameng, sensor e ke ke ea atametsoa haufi le WS433-CL-04 (1). Bakeng sa lintlha tse ling: http://www.daviteq.com/en/manuals/books/long-range-wireless-co-ordinator-ws433-cl/page/user-guidefor-long-range-wireless-co-ordinator-ws433-cl
Mosebetsi oa konopo
- Bula sekoaelo sa sensor ebe u sebelisa konopo ea push ho beha lebelo la phetisetso ea data bakeng sa metsotsoana ea 30 ea pele ha betri e kentsoe pele, kamora metsotsoana e 30 ts'ebetso ea konopo ea push ha e sebetse.
- Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 2 => LED e panya hang => Lokolla konopo ho seta sekhahla sa data RF 50kbps
- Tobetsa 'me u tšoare konopo bakeng sa metsotsoana ea 5 => LED e panya habeli => Lokolla konopo ho beha sekhahla sa data RF 625bps
- Tobetsa 'me u tšoare konopo bakeng sa metsotsoana ea 10 => LED e panya ka makhetlo a 3 => Lokolla konopo ho tsosolosa litekanyetso tsa RF (khafetsa, matla a tlhahiso ea RF, tekanyo ea data), haeba e tšoaroa ka metsotsoana e fetang 30 joale mosebetsi oa konopo ha o sebetse.
Seta bocha WS433 ea kamehla
- Hangata: 433.92 MHz
- Matla a ho fetisa a RF: 15dBm
- Sekhahla sa data sa RF: 50 kbps
Tlhophiso
Pele, u lokela ho lokisetsa
- Palo ea Node e tla bontša palo ea li-node tse laoloang ke WS433-CL.
- Nako le nako ha node e eketsoa, Nomoro ea Node e tla eketseha ka 1.
- Nako le nako ha node e hlakoloa, Nomoro ea Node e fokotsoa ke 1.
- Ho ngola Node ea Node = 0 e tla hlakola li-id tsa 40 tsa node ho 0.
- Haeba u batla ho hlakola node id, joale e ngole = 0 ka theW rite function ke 16 le Read function ke 3.
Mohato oa 1: Hokela Antenna, RS485 - thapo ea thapo le mohokahanyi oa phepelo ea motlakase
Mohato oa 2: Bula sesebelisoa sa Modbus ho PC
- U ka khoasolla Daviteq Modbus Configuration Tool ka sehokela se latelang: https://filerun.daviteq.com/wl/?id=qK0PGNbY1g1fuxTqbFW9SXtEvCw7bpc6
Setšoantšo File: https://filerun.daviteq.com/wl/?id=hgrjOg3wwvyrvAZ54p8iZiFpDyXTcnec
Mokhoa oa ho sebelisa software ea tlhophiso ea Modbus
- Unzip file le ho matha file sesebelisoa "Daviteq Modbus Configuration Tool Version"
- Khetha COM Port (Kou eo e leng thapo ea USB e hokeletsoeng)
- Beha BaudRate: 9600, Parity: ha ho letho
- Tobetsa "Hokela" ho fihlela Boemo bo bonts'a "khaotsoe" ho "hokahane". Ho bolela hore WS433-CL-04 e hokahanngoa le komporo;
- Ka mor'a moo, re hloka ho kenya tlhophiso file bakeng sa WS433-CL-04 ka ho kenya csv file: Eya ho MENUF: ILE / Import New / => khetha template file.
- Mohato oa 3: Lokisa likarolo tsa sensor.
Bangolisi ba Memmap
- U ka khoasolla Modbus Memmap ea WS433-CL ka sehokelo se latelang: https://filerun.daviteq.com/wl/?id=BKEaUzdArkoc0Hc7nfpRShdPVToVrqQZ
Ka memmap file, sheba Letlapa la Memmap la WS433-AI ho hlophisa likarolo tsa ts'ebetso ea sensor ka nepo.
Litaba: Liaterese tsa memmap li ipapisitse le tatellano ea li-sensor tse kentsoeng ho Memmap file hodimo
Ka tlase ke exampHo latela li-parameter tse ling tse tloaelehileng tsa sensor:
| Khoutu ea Mosebetsi (Bala) | # tsa ngodisa | Boholo ba Byte | Tlhaloso | Boleng Range | Ea kamehla | Sebopeho | Thepa | Tlhaloso |
| 4 | 1 | 2 | %Betri ea Node ea sensor | 10,30,60,99 | uint16 | Bala | Boemo ba betri, ke 04 feela
maemo: 10%, 30%, 60% le 99% (e tletse). Ha 10% ==> Ho hlokahala ho khutlisa betri |
|
| 4 | 2 | 4 | Boleng ba analog 1 ea sensor Node (paramethara 1) | phaphametse | Bala |
Boleng bo tsoang ho sensor ea ho kenya ea Analog. Boleng bona ke parameter 1 ea node ea sensor e se nang mohala |
| 4 | 2 | 4 | Boleng ba parameter 2 ea sensor Node | phaphametse | Bala | Boleng bo lekanang le paramethara 1 | ||||||
| 3 | 1 | 2 | Boemo ba data ba Node | 0-9, 99 | byte | Bala | 0-9: Nako e ntlafalitsoeng ea data 99:
E khaotsoe |
|||||
| 3 | 1 | 2 | RF Signal matla a Node |
0-4 |
byte | Bala | Ho tloha ho 0 ho isa ho 4
ka 0 e ntse e lahleheloa ke khokahano RF 'me 4 ke RF e matla ka ho fetisisa |
|||||
| 3 | 1 | 2 | Baesekele_tsoha | 1-3600 (s) | 120 | karolo ea 16 | Bala/Ngola | Nako le nako karohano ea Cycle_wakeup, node ea sensor e ne e tla romela FEELA data ho mohokahanyi haeba boleng bo bocha bo lekantsoeng bo fetotsoe ho feta boleng ba Delta ba boleng ba ho qetela bo lekantsoeng.
Default Cycle_wakeup ke metsotsoana e 120 |
||||
| 3 | 1 | 2 | Cycle_healthsta
|
60-7200 (s) | 600 | karolo ea 16 | Bala/Ngola |
Nako le nako karohano ea node ea sensor ea Cycle_healthsta e tla romella data ho mohokahanyi ho sa tsotelehe boemo bofe kapa bofe.
|
||||
| 3 | 2 | 4 | Maqhubu a seea-le-moea | 433.05- 434.79, 433 Mhz | 433.92 | phaphametse | Bala/Ngola | Lokisa maqhubu a ts'ebetso ea sensor ea waelese ke Coordinator, e lokelang ho hlophisoa ho tloha 433.05- 434.79 MHz, bakeng sa basebelisi ba tsoetseng pele feela. | ||||
Ho kenya
Ho kenya bracket
- Fumana sebaka seo sensor ea waelese e kenngoeng ho sona, ho tloha moo fumana boemo ba ho beha bracket;
- Ho beha mojule oa mohala ka har'a bracket ebe o e sireletsa ka li-screw tsa 02 x M2 (tse fanoeng ka mokotleng oa lisebelisoa)
Hlokomela: Bracket e ka kenngoa mojuleng oa mohala ka mahlakoreng ka bobeli, holimo kapa tlase
The mounting bracket e entsoe ka thepa ea tšepe e thata. Mehato e latelang ke ea ho kenya bracket ena;
Sebaka sa ho kenya
Sensor e se nang mohala e sebelisa lets'oao la RF ea matla a tlase haholo a 433Mhz ho fetisa / ho amohela data le mohokahanyi oa Wireless. Ho eketsa sebaka sa phetisetso, boemo bo loketseng ke Line-of-sight (LOS) lipakeng tsa sensor ea Wireless le Gateway. Bophelong ba sebele, ho ka 'na ha se ke ha e-ba le boemo ba LOS. Leha ho le joalo, li-module tse peli li ntse li buisana, empa sebaka se tla fokotseha haholo. Bracket e tla ts'oaroa leboteng kapa thepa e nang le sebaka se bataletseng se nang le tepi ea 3M e nang le mahlakoreng a mabeli (e kenyelelitsoeng ka mokotleng oa lisebelisoa ka lebokoseng la lebokose) kapa 2 x M4 screws (e fanoeng ke moreki);
Litaba: Ha o sebelisa tepi e mahlakoreng a mabeli a 3M, ka kopo kenya sensor e bolelele ba limithara tse 2 kapa ka tlase ho moo.
TLHOKOMELO
U SE KE UA kenya sensor ea Wireless kapa antenna ea eona ka har'a lebokose la tšepe le phethiloeng kapa ntlo, hobane lets'oao la RF le ke ke la feta leboteng la tšepe. Ntlo e hahiloe ka thepa e seng ea tšepe e kang polasetiki, khalase, lehong, letlalo, konkreite, samente…e ea amoheleha.
IO Wiring
Tlhokomediso
- U SE KE UA HOKOLA PHEPO EA MATLA A KA NTLE HO PWR + terata ea sensor e se nang mohala !!!
- HO FELA KA TLALEHO EA MATLA A KA KA NTLE HO SENSOR'S PWR + LINE HO KA ETSA TŠENYEHO E MAHALA !!!
- Khubelu: Phepelo ea Phepelo ea Matla
- Botsho: Fatše (GND)
- Botala: 4-20mA Kenyeletso
- Bosoeu: Ha e kopane
Tlhokomeliso: Ho ipapisitsoe le mofuta oa sensor ho tla ba le Phepelo ea Matla a Output e tsamaellanang:
- WS433-MA-21: 15VDC
- WS433-MA-31: 24VDC
NYEOHO 1 : SEBETSA KA LOOP POWERED SENSOR
NYEOHO 2: SEBETSA LE NON - LOOP POWERED SENSOR
Tlhokomeliso: Mohala oa lets'oao o tsoang ho sensor o lokela ho sireletsoa ka hose ea masenke kapa pitsa ea polasetiki ea Φ16, boloka mohala o qoba libaka tse phahameng tsa mocheso.
Ho kenya betri
Mehato ea ho kenya betri:
- Mohato oa 1: Ho sebelisa screw driver ea Philips ho theola sekoti sa M2 lehlakoreng la ntlo.
- Mohato oa 2: Hula sekoahelo ebe u kenya betri ea AA 1.5VDC, ka kopo ela hloko lipalo tsa betri.
- HLOKOMELA: Ka lebaka la O-ring, e hloka ho ba le matla a mangata a ho hula qalong, kahoo ka kopo e etse ka hloko ho qoba tšenyo ea boto ea potoloho e tšesaane haholo (1.00mm);
- POLARITY E FETISITSENG EA LIBETRI KA METSOTSOTSOENG E 10 E KA SENYA SENSOR CIRCIT!
- Mohato oa 3: Kenya ntlo ea polasetiki e holimo le ho notlela ka sekurufu sa M2
Ho batle phoso
| Che. | Phenomena | Lebaka | Litharollo |
| 1 | Boemo ba LED ba sensor ea waelese ha bo bonese | Ha ho phepelo ea motlakase Ts'ebetso ea Configuration ea LED e fosahetse | Sheba hore na betri ha e na letho kapa ha e ea kengoa ka nepo
Lokisetsa hape tšebetso ea lebone la LED hantle joalo ka ha o laetsoe |
| 2 | Sensor e se nang mohala ha e hokahane le mohokahanyi | Ha ho phepelo ea motlakase
Ts'ebetso ea tlhophiso ea sekhahla sa data ea RF e fosahetse |
Sheba hore na betri ha e na letho kapa ha e ea kengoa ka nepo
Lokisa hape sekhahla sa data sa RF ka konopo ho latela litaelo |
Mabitso a tšehetsang
Moetsi
Litlhaloso tsa likarolo tsa Daviteq Technologies Inc
- No.11 Street 2G, Nam Hung Vuong Res., An Lac Ward, Binh Tan Dist., Ho Chi Minh City, Vietnam.
- Mohala: +84-28-6268.2523/4 (ext.122)
- Lengolo-tsoibila: info@daviteq.com
- www.daviteq.com
Distributor naheng ea Australia le New Zealand
- Templogger Pty Ltd
- Mohala: 1800 SERETSI
- Lengolo-tsoibila: contact@templogger.net
Phetolelo #31
E thehiloe Sat, Mar 21, 2020 1:29 AM ke Kiệt Anh Nguyễn
E ntlafalitsoe Labone, Jan 31, 2023 2:35 AM ka Phi Hoang Tran
Litokomane / Lisebelisoa
 |
Daviteq WS433-MA Wireless Current Input [pdf] Bukana ea Mosebelisi WS433-MA-21, WS433-MA-31, WS433-MA Wireless Current Input, WS433-MA, Kenyo ya Hona Jwale e senang Waele, Kenyo ya Hona Jwale, Kenyo |