Danfoss KoolProg PC Software

Litlhaloso

• Lihlahisoa tsa Danfoss tse tšehetsoeng: ETC 1H, EETc/EETa, ERC 111/112/113, ERC 211/213/214, EKE 1A/B/C, AK-CC55, EKF 1A/2A, EIM 365, EKE 100, EKEC 22x
• Sistimi ea Ts'ebetso: Windows 10 kapa Windows 11, 64 bit
• RAM: 8 GB ea RAM
• Sebaka sa Hard Drive: 200 GB
• Software e hlokahalang: MS Office 2010 le ka holimo
• Sesebelisoa: USB 3.0

Selelekela

Ho lokisa le ho leka balaoli ba elektroniki ba Danfoss ha ho mohla ho kileng ha ba bonolo joalo ka software e ncha ea KoolProg PC.
Ka software e le 'ngoe ea KoolProg, joale u ka nka advantage ea likarolo tse ncha tse hlakileng joalo ka khetho ea manane a li-parameter tseo u li ratang, ho ngola inthaneteng le lenaneo le kantle ho marang-rang. files, le ho beha leihlo kapa ho etsisa liketsahalo tsa boemo ba alamo. Tsena ke tse ling feela tsa likarolo tse ncha tse tla fokotsa nako eo R&D le tlhahiso e tla e qeta ho nts'etsopele, ho hlophisa, le ho lekola mefuta ea Danfoss ea balaoli ba sehatsetsing sa khoebo.
Lihlahisoa tsa Danfoss tse tšehetsoeng: ETC 1H, EETc/EEta, ERC 111/112/113, ERC 211/213/214,
EKE 1A/B/C, AK-CC55, EKF 1A/2A, EIM 365, EKE 100, EKC 22x.
Litaelo tse latelang li tla u tataisa ha u kenya KoolProg® le tšebeliso ea lekhetlo la pele.

Khoasolla .exe file
Khoasolla KoolProgSetup.exe file ho tloha sebakeng: http://koolprog.danfoss.com

Litlhoko tsa tsamaiso
Software ena e etselitsoe mosebelisi a le mong le litlhoko tsa sistimi tse khothalelitsoeng joalo ka tlase.

OS	Windows 10 kapa Windows 11, 64 bit
RAM	8 GB ea RAM
HD Space	200GB le 250GB
Software e hlokahalang	MS Ofi ce 2010 le ho feta
Sehokedi	USB 3.0

Sistimi ea ts'ebetso ea Macintosh ha e sebetse.
Ho tsamaisa seta ka kotloloho ho tsoa ho seva sa Windows kapa marang-rang file seva ha e khothalletsoe.

Ho kenya software
Tobetsa habeli aekhoneng ea ho seta ea KoolProg®.
Matha wizate ya ho instola mme o latele ditaelo tse skrineng ho phethela kopo ya KoolProg®.

Hlokomela: Haeba u kopana le "temoso ea Tšireletso" nakong ea ho kenya, ka kopo, tobetsa "Kenya software ena ea mokhanni leha ho le joalo".

Khokahano le balaoli

1. Hokela KoolKey koung ea USB ea PC u sebelisa thapo e tloaelehileng ea USB.
2. Hokela molaoli ho KoolKey o sebelisa thapo ea sehokelo ea taolo e fapaneng.

1. Hokela thapo ya USB koung ya USB ya PC.
2. Hokela selaoli u sebelisa thapo e fapaneng.

TLHOKOMELISO: Ka kopo etsa bonnete ba hore ho hoketsoe molaoli a le mong ka nako efe kapa efe.

Bakeng sa lintlha tse ling mabapi le litlhophiso tsa mananeo file ho molaoli ea sebelisang KoolKey le Mass Programming Key ka kopo sheba likhokahano tse latelang: KoolKey (EKA200) le Mass Programming Key (EKA201).

Ho qala lenaneo

 

 

Ho fihlella

• Basebelisi ba nang le password ba na le phihlello ea likarolo tsohle.
• Basebelisi ba se nang phasewete ba na le phihlello e fokolang mme ba ka khona ho sebelisa karolo ea 'Copy to controller'.

Beha liparamente

Sesebelisoa sena se u lumella ho hlophisa litlhophiso tsa parametha bakeng sa sesebelisoa sa hau.
Tobetsa e 'ngoe ea li-icon tse kholomong e ka ho le letona ho theha tlhophiso e ncha kantle ho marang-rang, ho kenya litlhophiso ho tsoa ho molaoli ea hokahaneng kapa ho bula projeke e seng e bolokoa.
U ka bona merero eo u seng u e entse tlas'a "Bula litlhophiso tsa morao-rao file”.

E ncha
Theha morero o mocha ka ho khetha:

• Mofuta oa taolo
• Nomoro ea karolo (nomoro ea khoutu)
• Nomoro ea PV (mofuta oa sehlahisoa).
• SW (software) phetolelo

Hang ha u khethile a file, o hloka ho reha morero. Tobetsa 'Finish' ho tsoela pele ho view ebe u beha liparamente.

Hlokomela: Ke linomoro tsa khoutu tse tloaelehileng feela tseo u ka khethang ho tsona sebakeng sa "Code Number". Ho sebetsa kantle ho marang-rang ka nomoro ea khoutu e sa tloaelehang (nomoro ea khoutu e ikhethileng ea moreki), sebelisa o mong oa mekhoa e 'meli e latelang:

1. Hokela molaoli oa nomoro ea khoutu e tšoanang le KoolProg u sebelisa Gateway, 'me u sebelise "Import setting from Controller" ho etsa tlhophiso. file ho tsoa ho eona.
2. Sebelisa karolo ea "Open" ho bula se seng se bolokiloe sebakeng sa heno file ho PC ea hau ea nomoro ea khoutu 'me u thehe e ncha file ho tsoa ho eona.

E ncha file, e bolokiloeng ho PC ea hau sebakeng sa heno, e ka fumaneha ntle le marang-rang nakong e tlang ntle le ho hokela molaoli.

Kenya litlhophiso ho tsoa ho molaoli
E o lumella ho kenya litlhophiso ho tsoa ho molaoli o hokahaneng ho ea ho KoolProg le ho fetola litlhophiso ntle le inthanete.
Khetha "Import setting from controller" ho kenya liparamente tsohle le lintlha tse tsoang ho molaoli o hokahaneng ho ea ho PC.

Ka mor'a hore "Import e phethetsoe", boloka litlhophiso tse tsoang linaheng tse ling file ka ho fana ka file lebitso lebokoseng la molaetsa oa pop-up.

Hona joale litlhophiso tsa parameter li ka sebetsoa kantle ho marang-rang 'me li ka ngolloa hape ho molaoli ka ho tobetsa "Export" . Ha o ntse o sebetsa ntle le marang-rang, molaoli o hokahantsoeng o bonts'oa o putsitsoe 'me litekanyetso tse fetotsoeng tsa paramethara ha li ngoloe ho molaoli ho fihlela konopo ea ho romela kantle e tobetsoa.

Bula

Taelo ea "Open" e u lumella ho bula litlhophiso filee se e bolokiloe komporong. Hang ha taelo e tobetse, fensetere e tla hlaha ka lethathamo la litlhophiso tse bolokiloeng files.
Merero eohle e bolokiloe mona foldareng: "KoolProg/Configurations" ka ho sa feleng. U ka fetola setšoantšo sa kamehla file ho boloka sebaka ho "Likhetho" .
U ka boela ua bula litlhophiso files o fumane ho tsoa mohloling o mong mme o bolokile foldareng efe kapa efe o sebelisa khetho ea ho bala. Ka kopo hlokomela hore KoolProg e tšehetsa tse ngata file mekhoa (xml, cbk) bakeng sa
balaoli ba fapaneng. khetha maemo a loketseng file sebopeho sa taolo eo u e sebelisang.

Hlokomela: sebopeho sa .erc /.dpf fileLitaolo tsa ERC/ETC ha li bonahale mona. An .erc kapa .dpf file E bolokiloeng ho PC ea hau e ka buloa ka e 'ngoe ea litsela tse latelang:

1. Khetha "Projeke e Ncha" 'me u ee lethathamong la Parameter view ea mohlala o tšoanang oa molaoli. Khetha konopo ea Open ho sheba le ho bula .erc/.dpf file ho PC ea hau.
2. Khetha "Laola ho tsoa ho molaoli" haeba u hokahantsoe le molaoli a le mong inthaneteng ebe u ea lethathamong la parametha. view. Khetha konopo ea Open ho sheba se batloang .erc/.dpf file le view ho KoolProg.
3. Khetha "Bula" ho bula .xml efe kapa efe file ea molaoli ea tšoanang, fihla lenaneng la paramethara view skrineng, 'me moo u khethe konopo ea Bula ho sheba le ho khetha .erc/.dpf file ho view 'me u li hlophise files.

Mofuta oa taolo ea kantle (feela bakeng sa AK-CC55, EKF le EIM):
Sena se o fa monyetla oa ho kenya mofuta oa molaoli (.cdf) ntle le marang-rang le ho hlahisa polokelo ea boitsebiso ho KoolProg. Sena se tla u lumella ho etsa litlhophiso file offline ntle le hore molaoli o hoketsoe ho KoolProg. KoolProg e ka tlisa mofuta oa controller (.cd) o bolokiloeng ho PC kapa sesebelisoa leha e le sefe sa polokelo.

Wizate ea ho seta kapele (feela bakeng sa AK-CC55 le EKC 22x):
Mosebelisi a ka tsamaisa seta-up e potlakileng ka bobeli ntle le marang-rang le marang-rang ho theha molaoli bakeng sa ts'ebeliso e hlokahalang pele a fetela ho litlhophiso tse qaqileng tsa paramente.

Fetolela tlhophiso files (feela bakeng sa AK-CC55 le ERC 11x):
Mosebedisi a ka fetola tlhophiso files ho tloha ho software e 'ngoe ho ea ho mofuta o mong oa software ea mofuta o tšoanang oa taolo 'me e khona ho fetolela litlhophiso ho tloha ka litsela tse peli (mofuta o tlase ho isa ho o phahameng oa SW le holimo ho theola mofuta oa SW.

1. Bula litlhophiso file e hlokang ho fetoloa ho KoolProg tlasa "Set parameter".
2. Tobetsa ho fetola maemo .
3. Khetha lebitso la projeke, nomoro ea khoutu le mofuta oa SW / Sehlahisoa sa tlhophiso file e lokelang ho hlahisoa ebe o tobetsa OK.
4. Molaetsa oa pop-up o nang le kakaretso ea phetoho o tla hlahisoa qetellong ea phetoho.
5. E sokolohile file e hlahisoa skrineng. Litekanyetso life kapa life tse nang le letheba la lamunu li bontša hore boleng ba paramethara ha bo kopitsoe mohloling file. E khothaletsoa ho review paramethara tseo le ho etsa liphetoho tse hlokahalang pele koalang ea file, haeba ho hlokahala.

Kopitsa ho sesebelisoa

Mona o ka kopitsa litlhophiso files ho molaoli ea hokahaneng hammoho le ho ntlafatsa Firmware ea molaoli. Karolo ea ntlafatso ea firmware e fumaneha feela bakeng sa mohlala o khethiloeng oa molaoli.

Kopitsa maemo files: Khetha tlhophiso file u batla ho etsa lenaneo ka taelo ea "BROWSE".
U ka boloka litlhophiso file ho “Ratoang Files" ka ho tobetsa konopo ea "Set as Favourite". Morero o tla kenyelletsoa lethathamong mme o ka fihlelleha habonolo hamorao.
(Tobetsa letšoao la lithōle ho tlosa morero lethathamong).
Hang ha u khethile tlhophiso file, lintlha tsa bohlokoa tsa ba khethiloeng file di bontshwa.

Ntlafatso ea Firmware (feela bakeng sa AK-CC55 le EETa):

1. Batla firmware file (Bin file) o batla ho etsa lenaneo - firmware e khethiloeng file lintlha li hlahisoa ka letsohong le letšehali.
2. Haeba firmware e khethiloeng file e lumellana le molaoli ea hokahaneng, KoolProg e nolofalletsa konopo ea ho qala mme e tla nchafatsa firmware. Haeba e sa tsamaisane, konopo ea ho qala e lula e holofetse.
3. Kamora ntlafatso e atlehileng ea firmware, molaoli o qala hape mme o bonts'a lintlha tse ntlafalitsoeng tsa molaoli.
4. Karolo ena e ka sireletsoa ka botlalo ka password. Haeba KoolProg e sirelelitsoe ka password, joale ha u bala firmware file, KoolProg e khothaletsa password mme o ka kenya firmware feela file ka mor'a ho kenya phasewete e nepahetseng.

Tšebeletso ea inthaneteng

Sena se u nolofalletsa ho shebella ts'ebetso ea nako ea sebele ea molaoli ha e ntse e sebetsa.

• O ka beha leihlo lintho tse kenang le tse hlahisoang.
• O ka hlahisa chate ea mola ho latela litlhophiso tseo u li khethileng.
• U ka hlophisa li-setting ka kotloloho ho molaoli.
• U ka boloka lichate tsa mela le litlhophiso ebe oa li sekaseka.

Dialamo (feela AK-CC55):
Tlas'a tab ea "Alarms", mosebelisi a ka khona view lialamo tse sebetsang le tsa histori tse teng ho molaoli ka nako stamp.

Boemo ba IO le Phetolelo ea Matsoho:
Mosebelisi a ka fumana chelete hang hangview ea lintho tse kenang le liphetho tse hlophisitsoeng le boemo ba tsona tlasa sehlopha sena. Mosebelisi a ka leka ts'ebetso ea tlhahiso le lithapo tsa motlakase ka ho beha molaoli ka har'a mokhoa oa ho laola ka letsoho le ho laola tlhahiso ka letsoho ka ho li BONA le HO TLOA.

Lichate tsa Mekhoa
Lenaneo le boloka data feela haeba lebokose la "Boloka chate" le khethiloe.
Haeba u batla ho boloka data e bokeletsoeng ho e 'ngoe file fometa, sebelisa taelo ea "Save As". Sena se o nolofalletsa ho boloka data ho .csv/.png file sebopeho.
Ka mor'a ho boloka setšoantšo, chate e ka ba viewed hamorao e khethiloeng file sebopeho.

Tšehetso ea molaoli e sa tsejoeng

(Ke feela bakeng sa balaoli ba ERC 112 & ERC 113)

Haeba molaoli e mocha a hokahane, database ea sena ha e so fumanehe ho KoolProg, empa o ntse o ka hokela ho molaoli ka mokhoa oa inthaneteng. Khetha "Import setting ho tloha sesebelisoa se hokahaneng"
kapa “Tshebeletso ya inthaneteng” ho view lenane la paramethara la molaoli ea hokahaneng. Likarolo tsohle tse ncha tsa molaoli o hokahaneng li tla hlahisoa tlas'a sehlopha se arohaneng sa menu "New Parameters". Mosebelisi a ka hlophisa litlhophiso tsa paramente ea molaoli ea hokahaneng mme a boloka maemo file ho PC ho lenaneo la boima ka ho sebelisa "Programming EKA 183A (Code no. 080G9740)".

Hlokomela: boemo bo bolokilweng file e entsoeng ka tsela ena e ke ke ea buloa hape ho KoolProg.

Ka kopo ikopanye le moemeli oa hau oa thekiso ea haufi bakeng sa thuso e eketsehileng.

Danfoss A/S Tharollo ea Boemo ba Leholimo
• danfoss.com • +45 7488 2222

Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, bokgoni kapa datha efe kapa efe ya tekheniki ho ditataiso tsa ditataiso tsa dihlahiswa, dipapatso, j.j. le hore na di fumaneha ka mongolo, ka molomo, ka elektroniki, inthaneteng kapa ka ho jarolla, di tla nkuwa e le tse rutang, mme di tlama feela haeba, ho isa boholeng, tshupiso e hlakileng e entswe ka khotheishene. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng libukeng, libukaneng, livideong le linthong tse ling Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa. Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

Lipotso Tse Botsoang Hangata

• P: Na nka tsamaisa software ee ho sistimi ea ts'ebetso ea Macintosh?
  A: Che, software ena e sebetsa feela le Windows 10 kapa Windows 11.
• P: Ke lokela ho etsa eng haeba ke kopana le temoso ea Tšireletso nakong ea ho kenya?
  A: Tobetsa ho "Kenya software ena ea mokhanni leha ho le joalo" ho tsoela pele ka ho kenya.

Litokomane / Lisebelisoa

Danfoss KoolProg PC Software [pdf] Bukana ea Mosebelisi KoolProg PC Software, PC Software, Software

Litšupiso

• Bukana ea Mosebelisi