Danfoss DCR Filter Drier Shell Installation Guide
Moralo
Ho kenya
Brazing
Welding
Mekhoa e metle ea bareki e ntse e tla hlokahala:
- Sebelisa sekoahelo se metsi ha u kenya.
- Braze manonyeletso.
- Li tlohele li pholile.
- Hloekisa sebaka sa brazing / welding ka mor'a ho kenya (tlosa flux e setseng ka borashe).
- Ena ke ts'ebetso ea bohlokoa 'me e hloka ho etsoa ka hloko e kholo ho tlosa phallo eohle e setseng.
- Pente / Anti-corrosion e hloka ho koahela likarolo tsohle tsa tšepe tse bulehileng, libaka tseo pente ea mantlha e ntšo e chesitsoeng ka lebaka la ho belisoa le bonyane 3 cm. tsa koporo.
- Penta manonyeletso habeli.
⚠ Se ke oa kenya gasket pele ho solder.
Tlhokomeliso: Netefatsa hore sekoaelo se nepahetseng sa holimo se khethiloe Gasket.
Ho na le li-gaskets tse 2:
- DCR le DCR/H
– DCRE
Keletso:
Sebelisa oli e nyane ho gasket pele u kopana. Ka ho khetheha, oli ea maiketsetso ea POE kapa ea PVE, leha ho ka sebelisoa oli efe kapa efe ea sepheo se akaretsang.
Gasket
Mokhoa oa ho tiisa liboutu
Plug ea boikhethelo, torque e tiileng e khothalelitsoeng: Plug: 1/4″ NPT: 50 Nm / 36.87 ft-lb e sebelisa liphutheloana tse 2 ho isa ho tse 3 tsa teflon.
Litekanyetso tsa torque tse boletsoeng li sebetsa feela ho liboutu tse fanoeng ke Danfoss.
* Mohato o mong le o mong o tlameha ho sebelisoa ho latela tatellano ea setšoantšo. AN164986434975en-000702 | 2
Litokomane / Lisebelisoa
 |
Danfoss DCR Filter Drier Shell [pdf] Tlhophiso Tataiso 023R950 4, 23Z85, 23M71.12, 23M115.10, DCR Filter Drier Shell, DCR, Filter Drier Shell, Drier Shell, Shell |