Danfoss DCR Lim Drier Plhaub Installation Guide
Tsim
Kev teeb tsa
Brazing
Vuam
Cov neeg siv khoom zoo tshaj plaws yuav tseem xav tau:
- Siv cov ntaub ntub dej thaum txhim kho.
- Braze cov pob qij txha.
- Cia lawv txias.
- Ntxuav lub brazing / vuam cheeb tsam tom qab lub installation (tshem tawm cov flux seem nrog txhuam).
- Qhov no yog ib qho kev ua haujlwm tseem ceeb thiab yuav tsum tau ua nrog kev saib xyuas zoo kom tshem tawm tag nrho cov flux seem.
- Xim / Anti-corrosive yuav tsum tau npog tag nrho cov qhib steel qhov chaw, qhov chaw uas cov xim dub qub tau hlawv vim brazing thiab tsawg kawg yog 3 cm approx. ntawm cov tooj liab.
- Xim cov pob qij txha ob zaug.
⚠ Tsis txhob nruab gasket ua ntej soldering.
Nco tseg: Paub meej tias qhov raug sab saum toj Gasket raug xaiv.
Muaj 2 gaskets:
- DCR thiab DCR / H
– DCRE
Kev pom zoo:
Siv cov roj me me rau lub gasket ua ntej sib dhos. Zoo dua hluavtaws POE lossis PVE roj, txawm tias cov roj siv dav dav siv tau.
Gasket
Yuav ua li cas kom nruj cov bolts
Optional Plug, pom zoo kom nruj torque: Plug: 1/4 "NPT: 50 Nm / 36.87 ft-lb thov 2 mus rau 3 qhwv ntawm teflon daim kab xev.
Qhov tseem ceeb torque hais tsuas yog siv rau bolts muab los ntawm Danfoss.
* Txhua kauj ruam yuav tsum tau ua raws li cov kab ke ntawm daim duab. AN164986434975en-000702 | 2
Cov ntaub ntawv / Cov ntaub ntawv
 |
Danfoss DCR Lim Drier Plhaub [ua pdf] Daim ntawv qhia kev teeb tsa 023R950 4, 23Z85, 23M71.12, 23M115.10, DCR Lim Drier Plhaub, DCR, Lim Drier Plhaub, Drier Plhaub, Plhaub |