Danfoss 102E5 Electro Mechanical Mini Programmer
Lemoha ka kopo: Sehlahisoa sena se lokela ho kenngoa feela ke setsebi sa motlakase se koetlisitsoeng kapa se kenyang mocheso se nang le bokhoni, 'me se lokela ho lumellana le khatiso ea hajoale ea melaoana ea IEEE ea lithapo.
Tlhaloso ea lihlahisoa
| Tlhaloso | |
| Phepelo ea motlakase | 230Vac ± 15%, 50 Hz |
| Ketso e fetohang | 1 x SPST, Mofuta oa 1B |
| Max. Reite ea phetoho | 264Vac, 50/60Hz, 6(2)A |
| Ho Nepaha ha Nako | ±1 mots./khoeli |
| Kakaretso Rating | IP20 |
| Max. Ambient Mocheso | 55°C |
| Litekanyo, mm (W, H, D) | 112 x 135 x 69 |
| Mokhoa o hlophisitsoeng | EN 60730-2-7 |
| Laola Boemo ba Tšilafalo | Degree 2 |
| Rated Impulse Voltage | 2.5kV |
| Teko ea Khatello ea Ball | 75°C |
Ho kenya
NB. Bakeng sa li-unit tsa FRU - leba ka kotloloho ho ntlha ea 4
- Lokolla screw ea ho lokisa botlaaseng ba yuniti ho lokolla Sekoaelo sa Wiring sa polasetiki se bohlooho. Netefatsa hore tepi e sireletsang holim'a monoana o motona o lula o le teng.
- Ha u tšoere oache ea yuniti ho ea tlase, tobetsa ka thata bohareng ba lebota la lebota 'me u e tlose ho tloha mojulung joalo ka ha ho bonts'itsoe.
- Lokisa Wallplate / Terminal Block leboteng ka countersunk No.8 woodscrews kapa ho lebokose la tšepe ho BS 4662. 1970 kapa holim'a tšepe ea tšepe kapa lebokose le bōpiloeng le nang le litsi tsa 23 / 8 "(60.3mm).
- Ha u bua ka Lits'oants'o tsa Wiring leqepheng la 6, hokela yuniti joalo ka ha ho bonts'itsoe. Etsa bonnete ba hore li-terminals 3 le 6 li hoketsoe moo ho hlokahalang (Mains Voltage applications) e nang le cable e insulated e khonang ho jara mojaro o felletseng oa hajoale.
- Etsa bonnete ba hore lerōle le lithōle tsohle li tlositsoe sebakeng seo, ebe u plug module Þ rmly ka har'a lebota la lebota ho netefatsa hore hoko e kaholimo ho lebota e hokahana le sekotjana se ka morao ho 'mele. Tobetsa module fatše ho fihlela e fumaneha ka thata.
- Khaola lesoba la thapo ka Sekoahelong sa Wiring ha ho hlokahala; tlosa Sekoaelo sa Wiring, 'me u tiise Þ xing screw.
- Bulela Mains le tlhahlobo bakeng sa ts'ebetso e nepahetseng ka tsela e latelang:
i) Tlosa theipi e sireletsang ho tloha lebili la pele ho khetho.
ii) Tlosa sekoaelo sa ho daela 'me u fetole oache ho daela liphetolelo tse peli ho hlakola mochini.
ii) Lekola hore na maemo ohle a Selector Switch le Tappets a sebetsa ka nepo. (Sheba litaelo ho Bukana ea Basebelisi.) - Kenya sebaka sa sekoaelo sa ho daela. Qetellong siea bukana ena, e nang le litaelo tsa USER ho Mong'a Ntlo.
- Haeba yuniti e lokela ho tloheloa e tingoe 'me e le sebakeng se lerōle, sireletsa lebili la pele-pele ka ho tiisa teipi e sireletsang hape.
BOHLOKOA: Tlosa theipi pele o kenya unit ts'ebetsong.
Wiring
- Sistimi e tloaelehileng ea khase ea lapeng kapa ea oli e nang le matla a khoheli a metsi a chesang le mocheso o pompetsoeng (haeba palo ea kamore e sa hlokehe, pompo ea terata L ka kotloloho ho terminal 2 ho 102).
- Sistimi e pompetsoeng ka botlalo e nang le cylinder stat in HW circiut le room stat le 2 port spring return zone valve ho potoloho ea ho futhumatsa.
Moqapi oa hau
102 mini-programmer ea hau e u lumella ho bulela le ho tima metsi a hau a chesang le a chesang ka linako tse u tšoanelang.
Ka tloaelo 102 e fana ka linako tsa 2 ON le linako tse 2 OFF letsatsi ka leng. Leha ho le joalo 1 ON le 1 OFF nako e ka fumanoa ka ho sebelisa Wheel Pre-Selector (sheba leqephe la 11).
U ka khetha hore na 102 e laola metsi a hau a chesang le ho futhumatsa hammoho, metsi a chesang feela kapa ha ho sistimi (OFF) o sebelisa switch ea rocker.
Fetileview
Ho beha nako ea letsatsi
Mohala o ka pele ho 102 o bonts'a lihora tsa letsatsi o sebelisa oache ea lihora tse 24.
- Tlosa sekoaelo sa ho daela (retelehela hanyane ka ho le letšehali ebe u hula)
- Fetolela mohala ho fihlela nako e nepahetseng e tsamaellana le letšoao la TIME (joalokaha ho bontšitsoe).
BOHLOKOA: retelletsa ho daela ho ea ka nako ea oache feela
Hopola hore u tla tlameha ho beha nako bocha ka mor'a ho khaola motlakase, le ha lioache li fetoha nakong ea Selemo le Hoetla.
Ho hlophisa lenaneo (Tappets A, B, C, D)
- Haeba e se e se e entsoe, tlosa sekoaelo sa ho daela (retelehela hanyane ka ho le letšehali ebe u hula)
- Etsa qeto ea hore na u batla hore metsi a hau a chesang le a futhumatsang a kene neng le ho tima. Ha u ntse u tšoara konopo ea ho daela, thellela lipompo tse FUBEDU ho linako tse batloang ON le lipompo tse BLUE ho linako tse batloang tsa OFF (litheipi li ka ba thata ho li tsamaisa)
Hlokomela: Li-tappets li ka tsamaisoa ho potoloha mohala ka tsela ea oache kapa e khahlanong le oache, ha ho le bonolo.
Example:
Haeba u batla hore sistimi ea hau e BULE lipakeng tsa 8am le 10am hape hape lipakeng tsa 4pm le 11pm, seta lipompo joalo ka ha ho bonts'itsoe. (A ho isa ho 8, B ho isa ho 10, C ho isa ho 16, D ho isa ho 23).
- A = 1st ON
- B = 1st OFF
- C = 2nd ON
- D = 2nd OFF
Hopola:
Li-tappets tse khubelu (A le C) ON
Litheipi tse putsoa (B le D) switjha
3. Etsa bonnete ba hore sehlomathisi se tlositse tepi e sireletsang e koahelang lebili la khetho ea pele.
4. U sebelisa konopo ea ho daela, potoloha mohala ka ho feletseng bonyane habeli, ho ea ka tšupa-nako feela, ho hlakola mochine.
Ho khetha mokhoa oa ho sebetsa
Rocker Switch e lehlakoreng la yuniti e sebelisoa ho khetha hore na 102 ea hau e laola metsi a chesang le sistimi ea ho futhumatsa joang. O ka khetha ka bowena:
- metsi a chesang feela
- metsi a chesang le ho futhumatsa hammoho
- leha e le (sistimi OFF)
Fetola maemo
Yuniti ea 102 e se e setiloe, 'me boemo ba hajoale ba mini-programmer bo ka bonoa lebiling le kaholimo ho le letona la yuniti, (mohlala, HO TLOHA HO FIHLELA C).
Liphetoho tsa nakoana
Ho fetisa lenaneo ho sebelisa lebili la Pre-Selector
Lebili le khethang esale pele le ka sebelisoa ho hlakola lenaneo le behiloeng linakong tseo ka tsona u hlokang ho fetola mokhoa oa hau o tloaelehileng oa ho futhumatsa.
Ka ho bulela lebili ho ea ka tsela e fapaneng le oache, o ka bulela yuniti ha e TLOhile le ka tsela e fapaneng.
ExampLe:
- Lenaneo la hau le behiloe e le hore futhumatsang ea hau e tle ka 4pm empa u fihle hae pele ho nako e tloaelehileng, ka 2pm 'me u hloka ho buloa hang-hang.
- Fetola lebili khahlanong le oache ho fihlela le hlaha HO FIHLELA "D" joalo ka ha ho bonts'itsoe.
- Kahoo sistimi e buloa ka letsoho ka 2pm empa e tla khutlela lenaneong le behiloeng ts'ebetsong e latelang (ke hore, OFF ka 11pm)
Tse ling tsa likhetho tse sebetsang esale pele ke tsena:
LETSATSI KAOFELA (1 KA TSOHLE/1 TSATSI)
Fetola Wheel ho hlahisa HO FIHLELA D.
LETSATSI LETSATSI
Tlosa Wheel ho hlahisa HO FIHLELA A.
Hlokomela: Se ke oa sebelisa khetho ea pele ha theipi e le haufi le letšoao la TIME. Sena se ka 'na sa etsa hore nako ea ts'ebetso ea letsatsi e fetoloe,' me nako e tla hloka ho hlophisoa bocha.
U ntse u na le mathata?
Letsetsa moenjiniere oa sebaka sa heno:
Lebitso:
Mohala:
Etela ea rona websebaka: www.heating.danfoss.co.uk
Romela lefapha la rona la tekheniki lengolo-tsoibila: ukheating.technical@danfoss.com
Letsetsa lefapha la rona la tekheniki
01234 364 621
(9:00-5:00 Mon-Thurs, 9:00-4:30 Fri)
Danfoss Ltd
Ampthill Road
Bedford
MK42 9ER
Mohala: 01234 364621
Fekese: 01234 219705
Litokomane / Lisebelisoa
 |
Danfoss 102E5 Electro Mechanical Mini Programmer [pdf] Bukana ea Mosebelisi 102, 102E5, 102E7, 102E5 Electro Mechanical Mini Programmer, 102E5, Electro Mechanical Mini Programmer, Mechanical Mini Programmer, Mini Programmer, Programmer |