Danfoss 102E5 Electro Mechanical Mini Programmer
Da fatan za a kula: ƙwararren ɗan lantarki ko ƙwararren mai saka dumama ne kawai ya shigar da wannan samfurin, kuma ya dace da bugu na yanzu na ƙa'idodin wayoyi na IEEE.
Ƙayyadaddun samfur
| Ƙayyadaddun bayanai | |
| Tushen wutan lantarki | 230Vac ± 15%, 50 Hz |
| Canza aikin | 1 x SPST, Nau'in 1B |
| Max. Canja kima | 264Vac, 50/60Hz, 6(2)A |
| Daidaiton Lokaci | ± 1 min./wata |
| Ƙididdiga na Ƙalla | IP20 |
| Max. Yanayin yanayi | 55°C |
| Girma, mm (W, H, D) | 112 x 135 x 69 |
| Daidaitaccen ƙira | TS EN 60730-2-7 |
| Sarrafa Gurbacewar Halin | Digiri 2 |
| Tasirin Tasirin Voltage | 2.5kV ku |
| Gwajin Matsayin Ƙwallo | 75°C |
Shigarwa
NB. Don raka'o'in FRU - tafi kai tsaye zuwa aya 4
- Sake gyara dunƙule a gindin naúrar don sakin murfin Wiring na filastik launin toka. Tabbatar cewa tef ɗin kariya akan ƙafar yatsan ya kasance a wurin.
- Rike fuskar agogon naúrar zuwa ƙasa, danna da kyau a tsakiyar farantin bango kuma zame shi daga tsarin kamar yadda aka nuna.
- Gyara Wallplate / Terminal Block zuwa bango tare da countersunk No.8 woodscrews ko zuwa wani karfe akwatin zuwa BS 4662. 1970 ko wani surface hawa karfe ko gyare-gyare akwatin da ciwon cibiyoyin na 23/8" (60.3mm).
- Dangane da Zane-zane na Waya a shafi na 6, haɗa naúrar kamar yadda aka nuna. Tabbatar cewa an haɗa tashoshi 3 da 6 a inda ake buƙata (Mains Voltage aikace-aikace) tare da kebul ɗin da aka keɓe mai iya ɗaukar cikakken nauyin halin yanzu.
- Tabbatar cewa an share duk kura da tarkace daga wurin, sa'an nan kuma toshe module Þ rmly a cikin farantin bango don tabbatar da cewa ƙugiya a saman farantin bangon ya haɗa tare da ramin a bayan jiki. Latsa tsarin ƙasa har sai ya gano wuri sosai.
- Yanke buɗaɗɗen kebul a cikin Murfin Waya idan ya cancanta; maye gurbin Murfin Wiring, kuma ƙara ƙara Þ xing dunƙule.
- Kunna Mais & gwada aiki daidai kamar haka:
i) Cire tef ɗin kariya daga dabaran riga-kafi.
ii) Cire murfin bugun kira & jujjuya bugun kiran agogon duka juyi biyu cikakke don share injin.
ii) Bincika cewa duk wurare na Zaɓin Canjawa da Tappets suna aiki daidai. (Duba umarni a cikin ɗan littafin mai amfani.) - Sauya murfin bugun kira. A ƙarshe bar wannan ɗan littafin, mai ɗauke da umarnin USER tare da Mai gida.
- Idan za'a bar naúrar a kashe kuma tana cikin yanayi mai ƙura, kare dabarar riga-kafi ta hanyar sake liƙa tef ɗin kariya.
MUHIMMANCI: Cire tef kafin saka naúrar cikin sabis.
Waya
- Tsarin gas na gida na yau da kullun ko tsarin kora mai tare da ruwan zafi mai nauyi da dumama famfo (idan ba a buƙatar kididdigar ɗaki, famfo L ɗin waya kai tsaye zuwa tasha 2 akan 102).
- Cikakken tsarin famfo tare da silinda stat a cikin HW circiut da dakin stat da 2 tashar jiragen ruwa dawo da yankin bawul a cikin dumama kewaye.
Mai shirye-shiryen ku
Mini-programmer ɗin ku 102 yana ba ku damar kunna dumama da ruwan zafi a lokacin da ya dace da ku.
Yawanci 102 yana ba da lokutan 2 ON da lokutan 2 KASHE kowace rana. Koyaya za'a iya samun lokacin 1 ON da 1 KASHE ta amfani da Wheel Pre-Selector (duba shafi na 11).
Kuna iya zaɓar ko 102 tana sarrafa ruwan zafi ɗinku & dumama tare, kawai ruwan zafi ko ba tsarin (KASHE) ta amfani da maɓallin rocker na hannu.
Ƙarsheview
Saita lokacin rana
Bugun bugun kira a gaban 102 yana nuna sa'o'in yini ta amfani da agogon awa 24.
- Cire murfin bugun kira (juya kaɗan zuwa hagu kuma cire)
- Juya bugun kiran agogon hannu har sai lokacin daidai ya daidaita zuwa alamar TIME (kamar yadda aka nuna).
MUHIMMANCI: juya bugun kira zuwa agogo kawai
Ka tuna cewa dole ne ka sake saita lokacin bayan yanke wutar lantarki, da kuma lokacin da agogo ya canza a lokacin bazara da kaka.
Saita shirin (Tappets A, B, C, D)
- Idan ba a riga an yi haka ba, cire murfin bugun kira (juya kaɗan zuwa hagu & cire)
- Yanke shawarar lokacin da kuke son ruwan zafi da dumama ku su kunna su tafi. Yayin damke maɓallin bugun kira yana zamewa tafsoshin RED zuwa lokutan da ake buƙata AKAN lokutan da BLUE tappets zuwa lokutan KASHE da ake buƙata (tappets na iya zama da ƙarfi don motsawa)
Lura: Ana iya matsar da tappets a kusa da bugun kira ta hanyar agogo ko gaba da agogo, gwargwadon dacewa.
Example:
Idan kuna son tsarin ku ON tsakanin 8 na safe zuwa 10 na safe kuma a sake tsakanin 4 na yamma zuwa 11 na yamma, saita tappets kamar yadda aka nuna. (A zuwa 8, B zuwa 10, C zuwa 16, D zuwa 23).
- A = 1st ON
- B = KASHE 1st
- C = 2nd ON
- D = KASHE na 2
Ka tuna:
Red tappets (A da C) suna kunnawa
Blue tappets (B da D) suna kashewa
3. Tabbatar cewa mai sakawa ya cire tef ɗin kariya da ke rufe dabaran riga-kafi.
4. Yin amfani da bugun bugun kira, juya bugun kiran gaba ɗaya aƙalla sau biyu, a gefen agogo kawai, don share na'urar.
Zaɓin yanayin aiki
Ana amfani da Canjin Rocker a gefen rukunin don zaɓar yadda 102 ɗinku ke sarrafa tsarin ruwan zafi & dumama. Kuna iya zaɓar ɗayan ɗayan da hannu:
- ruwan zafi kawai
- ruwan zafi & dumama tare
- ba (System KASHE)
Canja wurare
An saita naúrar 102 yanzu, kuma ana iya ganin halin yanzu na ƙaramin shirye-shirye akan dabaran a saman kusurwar hannun dama na rukunin, (misali KASHE HAR SAI C).
Sauke na ɗan lokaci
Mayar da shirin ta amfani da dabaran Pre-Selector
Za a iya amfani da dabarar riga-kafi don soke shirin da aka saita a lokuta lokacin da kuke buƙatar canzawa daga tsarin dumama na yau da kullun.
Ta hanyar juya dabaran gaba da agogo za ka iya kunna naúrar lokacin da ya KASHE kuma akasin haka.
Exampda:
- An saita shirin ku don dumama ku ya zo da karfe 4 na yamma amma kun isa gida da wuri fiye da yadda kuka saba, karfe 2 na rana kuma kuna buƙatar dumama nan take.
- Juya dabaran gaba da agogo har sai ya nuna KAN SAI “D” kamar yadda aka nuna.
- Don haka tsarin yana kunnawa da hannu da karfe 2 na rana amma zai koma tsarin da aka saita a aiki na gaba (watau KASHE a karfe 11 na dare)
Wasu sauran zaɓuɓɓukan da aka riga aka yi amfani da su sune:
DUK RANA (1 ON/1 KASHE)
Juya Dabarun don nunawa KAN SAI D.
KASHE KWANA
Juya Dabarun don nunawa HAR A.
Lura: Kar a yi aiki da mai zaɓe yayin da tappet ke kusa da alamar TIME. Wannan na iya sa lokacin saita agogon rana ya canza, sannan lokacin zai buƙaci sake saita lokaci.
Har yanzu kuna da matsaloli?
Kira injiniyan dumama na gida:
Suna:
Tel:
Ziyarci mu website: www.heating.danfoss.co.uk
Yi imel ɗin sashen fasaha na mu: ukheating.technical@danfoss.com
Kira sashen fasaha na mu
01234 364 621
(9:00-5:00 Mon-Thurs, 9:00-4:30 Fri)
Danfoss Ltd
AmpTitin tudu
Bedford
MK42 9ER
Lambar waya: 01234 364621
Fax: 01234 219705
Takardu / Albarkatu
 |
Danfoss 102E5 Electro Mechanical Mini Programmer [pdf] Jagorar mai amfani 102, 102E5, 102E7, 102E5 Electro Mechanical Mini Programmer, 102E5, Electro Mechanical Mini Programmer |