KVM e inehetseng le theknoloji ea skrine ea rackmount
Bukana ea Mosebelisi
- KVM Rear Kit Version
bakeng sa LCD Console Drawe
E entsoe le ho etsoa ke Austin Hughes
Litaba tsa Molao
Khatiso ea pele ea Senyesemane, Phuptjane 2021
Lintlha tse tokomaneng ena li hlahlobiloe ka hloko bakeng sa ho nepahala; leha ho le joalo, ha ho tiisetso e fanoeng ea ho nepahala ha litaba. Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso. Ha re ikarabelle bakeng sa kotsi leha e le efe kapa tahlehelo e bakoang ke tšebeliso ea thepa ena.
Litaelo tsa Tšireletseho
Ka kopo bala litaelo tsena tsohle ka hloko pele u sebelisa sesebelisoa. Boloka bukana ena bakeng sa ts'upiso ea nako e tlang.
- Tlosa lisebelisoa pele u hloekisa. U se ke ua sebelisa sesepa sa metsi kapa sa spray; sebelisa lesela le mongobo.
- Boloka lisebelisoa hole le mongobo o feteletseng le mocheso. Ka ho khetheha, e boloke sebakeng se nang le moea o pholileng le mocheso o sa feteng 40º Celsius (104º Fahrenheit).
- Ha o kenya, beha lisebelisoa sebakeng se tiileng, se lekaneng ho thibela hore se se ke sa oela ka phoso 'me sa baka tšenyo ea lisebelisoa tse ling kapa kotsi ho batho ba haufi.
- Ha thepa e le sebakeng se bulehileng, u se ke ua koahela, ua thibela kapa ua thibela ka tsela leha e le efe lekhalo pakeng tsa eona le phepelo ea motlakase. Ho hlokahala hore moea o tsamaisane hantle le moea o se ke oa chesa.
- Rulahanya thapo ea motlakase ea sesebelisoa ka tsela eo ba bang ba ke keng ba khoptjoa kapa ba oela holim'a eona.
- Haeba u sebelisa thapo ea motlakase e sa kang ea romelloa ka thepa, etsa bonnete ba hore e kentsoe boleng ba motlakase.tage le ea morao-rao e ngotsoeng leiboleng ea litekanyetso tsa motlakase oa thepa. Molumotagtekanyetso ea khoele e lokela ho ba holimo ho feta e thathamisitsoeng leiboleng ea litekanyetso tsa thepa.
- Ela hloko litemoso tsohle le litemoso tse amanang le thepa.
- Haeba u sa ikemisetsa ho sebelisa thepa nako e telele, e hakolle ho tsoa mohloling oa motlakase ho thibela ho senngoa ke over-vol ea nakoana.tage.
- Beha metsi ohle hole le sesebelisoa ho fokotsa kotsi ea ho qhalana ka phoso. Mokelikeli o qhalaneng holim'a phepelo ea motlakase kapa lisebelisoa tse ling tsa thepa e ka baka tšenyo, mollo kapa ts'okelo ea motlakase.
- Ke basebeletsi ba ts'ebeletso ba tšoanelehang feela ba lokelang ho bula chassis. Ho e bula ka bouena ho ka senya thepa le ho etsa hore tiisetso ea eona e se ke ea sebetsa.
- Haeba karolo leha e le efe ea thepa e senyeha kapa e khaotsa ho sebetsa, e hlahlojoe ke basebeletsi ba nang le tsebo.
Seo waranti e sa se koaheleng
- Sehlahisoa sefe kapa sefe, seo nomoro ea serial e senyehileng, e fetotsoeng, kapa e tlositsoeng ho eona.
- Tšenyo, ho senyeha, kapa ho se sebetse hantle ho bakoang ke:
□ Kotsi, tšebeliso e mpe, ho se tsotelle, mollo, metsi, lehalima, kapa liketso tse ling tsa tlhaho, ho fetola sehlahisoa ho sa lumelloeng, kapa ho hlōleha ho latela litaelo tse fanoeng ka sehlahisoa.
□ Ho lokisa kapa ho leka ho lokisoa ke mang kapa mang eo re sa mo lumelisang.
□ Tšenyo efe kapa efe sehlahisoa ka lebaka la ho romelloa.
□ Ho tlosoa kapa ho kenya sehlahisoa.
□ E baka ka ntle ho sehlahisoa, joalo ka ho feto-fetoha ha matla a motlakase kapa ho hloleha.
□ Tšebeliso ea thepa kapa likarolo tse sa finyelle seo re se batlang.
□ Ho taboha ho tloaelehileng.
□ Mabaka afe kapa afe a sa amaneng le bofokoli ba sehlahisoa. - Ho tlosoa, ho hlongoa le ho qosoa ka litšebeletso.
Litsebiso tsa Taolo Khomishene ea Federal Communications (FCC)
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo.
Liphetoho leha e le life kapa liphetoho tse entsoeng sesebelisoa sena li ka senya matla a mosebedisi a ho sebelisa thepa ena. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me, haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio.
Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa ho feta tsa mehato e latelang:
- Beha sebaka hape kapa suthisa lenakana le amohelang.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
< Karolo ea 1 > Matrix Cat6 KVM
<1.1 > Likahare tsa Sephutheloana
Matrix Cat6 IP KVM Kit
<1.2> KVM port & Cat6 dongle connection
Cat6 Dongle
| Tshehetso ea Qeto | Hangata ( Hz ) |
| 1920 x 1080 | 60 |
| 1600 x 1200 | 60 |
| 1440 x 900 | 60 |
| 1280 x 1024 | 60 |
| 1024 x 768 | 60 / 70 / 75 |
<1.3 > Khokahano ea IP & Remote console
Bakeng sa remote console, max. bolelele ba cable bo itšetlehile ka qeto. Ka kopo sheba litafole tse ka tlase.
IP Console
| Tshehetso ea Qeto | Hangata ( Hz ) |
| 1600 x 1200 | 60 |
| 1280 x 1024 | 60 |
| 1024 x 768 | 60 / 70 / 75 |
Remote Console
| Tshehetso ea Qeto | Hangata ( Hz ) | Max. Cat6 Cable Length ( M ) |
| 1920 x 1080 | 60 | 50 |
| 1920 x 1200 | 60 | 50 |
| 1600 x 1200 | 60 | 100 |
| 1440 x 900 | 60 | 100 |
| 1280 x 1024 | 60 | 150 |
| 1024 x 768 | 60 / 70 / 75 | 150 |
Mokhoa oa ho sebelisa seamoheli ho hokela khomphutha e hole
Moamoheli o fana ka ts'ebetso ea hotkey bakeng sa console e hole. Ka kopo sheba P.21
<1.4> IP console setting
Kamora ho hokela thapo, ka kopo nka mehato e latelang ho lokisa IP KVM:
- Khoasolla IPKVMsetup.exe sehokelong: www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe
- Tobetsa habeli IPKVMsetup.exe ho hlophisa IP KVM ka ho seta sesebelisoa joalo ka tlase
- Tobetsa Refresh Device ho batla IP KVM e hokahaneng
- Khetha aterese ea MAC, eo u batlang ho e theha, ebe u tobetsa Sesebelisoa sa Query
- Kenya Super user login. The default ke super
- Kenya senotlolo sa Super user. Ea kamehla ke ho fetisa
- Kenya password e ncha ea superuser
- Kenya phasewete e ncha hape
- Fetola aterese ea IP eo u e batlang / Subnet mask / Gateway, ebe u tobetsa Setupo Sesebediswa ho netefatsa maemo ho IP KVM.
- Aterese ea kamehla e tjena ka tlase:-
■ Moetso o le mong oa IP KVM, joalo ka MU-IP3213
– http://192.168.1.22
– http://192.168.1.22 (bakeng sa IP ea pele)
http://192.168.1.23 (bakeng sa IP ea bobeli)
■ Mofuta oa bobeli oa IP KVM, joalo ka MU-IP3224
- Bula Internet Explorer ( IE ), mofuta oa 6.0 kapa ka holimo
- Kenya aterese ea IP KVM sebakeng sa aterese
- Bakeng sa IP e le 'ngoe - http://192.168.1.22
- Bakeng sa Dual IP - http://192.168.1.22 (bakeng sa IP ea pele)
http://192.168.1.23 (bakeng sa IP ea bobeli) - Kenya lebitso la mosebelisi ( default is super )
Password (ea kamehla ke pasa) - Kamora ho kena ka katleho ho IP KVM, mosebelisi o tla kenya leqephe la sehlooho la IP KVM
Litlhophiso li lekane bakeng sa intranet.
Haeba basebelisi ba fihlella KVM GUI ka marang-rang, ka kopo kopa thuso ho MIS 'me u khoasolle bukana ea mosebelisi ea IP KVM sehokelong: www.austin-hughes.com/support/usermanual/cyberview/UM-CV-IP.pdf
<1.5> Tlhophiso ea Bohlokoa esale pele bakeng sa khomphutha ea IP
U tlameha ho phethela mesebetsi e latelang ka mor'a hore tlhophiso ea IP console e etsoe.
( 1 ) SEBAKA SA SEBAKA SA TLHOKO
**Li-server tse hokahaneng le KVM
Qeto
IP KVM remote console e amohela mefuta e mengata ea lifomate tsa video tse nang le liqeto tse fihlang ho 1600 x 1200 @60Hz. (Sheba Bukana ea Mosebelisi bakeng sa lethathamo la lifomate tsa video tse tšehetsoeng). Fokotsa bandwidth ka ho beha qeto ea video ea seva e lebeletsoeng ho boemo bo tlase bo hlokehang bakeng sa ts'ebeliso ea hau ea ho lekola u le hole. Mekhoa e latelang ea lifitio e khothaletsoa:
(i) 1024 x 768 @ 60Hz
(ii) 1280 x 1024 @ 60Hz
Ho sistimi e etselitsoeng seva ea Windows, khetha Panel ea Taolo > Pontšo > Litlhophiso.
Fetola boleng ba qeto ea skrine ha ho hlokahala.
Tweba
Sebelisa li-drivers tsa generic mouse bakeng sa taolo e nepahetseng ea litoeba nakong ea mananeo a hole. Beha lebelo la pointer ea mouse ho boemo bo bohareng ntle le ho potlakisa kapa ho hlahisa litlamorao.
Sistimi ea seva ea sepheo sa Windows, khetha Paneli ea Taolo> Mouse> Likhetho tsa Pointer Beha lebelo la pointer ho ea bohareng ebe o tima ho nepahala ha pointer e ntlafalitsoeng.
Bakeng sa li-GUI tsa Linux, beha lebelo la toeba ho 1 hantle le moeli ho 1 hantle.
Haeba keyboard ea hau e lula e pheta linotlolo ha e kentsoe ho KVM. Ka kopo latela e 'ngoe e ka tlase:
( a. ) Numella nako ea ho lokolloa ha linotlolo haeba u na le li-keytroke tse kopitsoang nakong ea ts'ebetso e mpe ea marang-rang.
- kena ho IP KVM remote console
- e ea ho Litlhophiso tsa KVM tsa Interfaces> Keyboard / Mouse
– Tobetsa Key Release Timeout
- fetola Nako ea Nako ka mor'a ha ho hlokahala
(b.) Fokotsa tšebeliso ea li-bandwidth tsa video haeba u na le li-keytroke tse kopitsoang nakong ea marang-rang a fokolang
- kena ho IP KVM remote console
- ea ho Litlhophiso tsa KVM tsa Li-interfaces> Console ea mosebelisi> Khoutu ea phetisetso,
– kgetha Ka bowena
– lokisa Compression ho [ 0-none ] le Botebo ba Mmala ho [ 8-bit – 256 col ]
<1.5> Tlhophiso ea Bohlokoa esale pele bakeng sa khomphutha ea IP
( 2 ) REMOTE CLIENT COMPUT SETUP
Khomphutha ea moreki e hole e tlameha ho ba le a web sebatli (joalo ka Microsoft Internet Explorer, Mozilla Firefox, le Netscape Navigator) le Java Virtual Machine ( mofuta oa 1.4 kapa ho feta) e kentsoe. Numella Java ho web sebatli.
Ntlafatso ea JAVA bakeng sa IP KVM
Ka lebaka la ntlafatso ea morao-rao e tsoang ho ts'ireletso ea Java, bareki ba ka tobana le molaetsa oa "JAVA Block" ha ba ntse ba fihlella komporo e hole ka IP joalo ka tlase:
Haeba e boletse joalo, ka kopo khoasolla firmware ea morao-rao ea IP KVM ( mofuta oa aust-i11-150608 ) sehokelong se ka tlase: http://www.austin-hughes.com/resources/software/kvm-switch
Ebe u latela mehato e khomaretsoeng ho ntlafatsa firmware.
Mehato ea ntlafatso ea firmware
- Khoasolla firmware ea morao-rao ea IP KVM ( mofuta aust-i11-150608 ) sehokelong http://www.austin-hughes.com/resources/software/kvm-switch
- Kena ho IP KVM
- Tobetsa <Ntlafatsa Firmware>
- Tobetsa < Browse > ho khetha firmware file
- Tobetsa < Kenya >
- Tobetsa < Update >
Ka mor'a hore firmware e ntlafatsoe, IP KVM e tla tsosolosa ka bo eona.
Kamora motsotso o le mong, o tla fetisetsoa ho Leqephe la Keno mme o kope ho kena hape.
< 1.6 > KVM Cascade
- Cascade ho fihla ho maemo a 8, li-server tse 256
- Cascading multiple KVM ka CMC-8 cascade cable.
Li-KVM tse senyehileng ho tloha maemong a 2 ho isa ho 8 e tlameha ho ba mehlala ea MU-1602 / MU-3202 kapa M-802 / M-1602.
Ha matrices a mangata a KVM a thula hammoho, master KVM boemong ba 1 e tla nka taolo eohle ea li-switch tsa KVM tse ling (mohlala, boemo ba 2 ho isa ho 8).
Matrix a makhoba a KVM e tla ba mojule oa katoloso ea koung ea master matrix KVM, khomphutha ea mantlha e hole ho KVM ea lekhoba e tla etsoa sehlabelo le ho holofala.
EA-8
■ 8ft Matrix KVM cascade cable
Litlhaloso
| -MUIP1613 -MU1P3213 |
-MUIP1624 -MU1P3224 |
||
| Boema-kepe ba KVM Likou tse 'maloa: Sehokelo : Khokahano : |
16 kapa 32 RJ-45 DVI-D / VGA sehokelo sa dongle ho fihla ho limithara tse 40 (maoto a 132) ka thapo ea Cat6 / Cat5 |
||
| Local Console : | Ha ho na mofuta oa li-drawer tsa LCD console | ||
| Cat6 Remote Console Nomoro ea boema-kepe bo hole : Lekola boema-kepe : Keyboard & mouse port : Remote I/O : Tšehetso ea tharollo : |
1 DB15-pin VGA 2 x sehokelo sa mofuta oa USB bakeng sa keyboard le mouse RJ45 ka thapo ea Cat5 / Cat5e / Cat6 ho fihla ho 500 maoto 16: 9 - max. 1920 x 1080 16:10 - max. 1920 x 1200 4:3 - max. 1600 x 1200 |
||
| IP Remote Console Nomoro ea IP console : Taolo ea basebelisi : Browser : Tshireletso : IP Access : Tšehetso ea tharollo : |
1 bakeng sa -MUIP1613 / -MUIP3213 2 bakeng sa -MUIP1624 / -MUIP3224 Ho kena ha basebelisi ba 15, 1 x mosebelisi ea sebetsang Internet Explorer, Firefox, Safari SSL v3, RSA, AES, HTTP / HTTPs, CSR RJ45 Ethernet ka IP console 4:3 - max. 1600 x 1200 |
||
| Katoloso : | Ho fihla ho li-server tse 256 ka cascade ea maemo a 8 | ||
| Ho lumellana Hardware: Tšehetso ea OS: |
HP / IBM / Dell PC, Server le Blade Server LETSATSI / Mac Windows / Linux / Unix / Mac OS |
||
| Matla Kenyelletso : Tšebeliso : |
Adapter ea motlakase ea AC Boholo. 34W |
||
| Tšireletseho ea Taolo : Tikoloho: |
FCC & CE e netefalitsoe RoHS3 & REACH e lumellana |
||
| Tikoloho Mocheso : Mongobo: Altitude: Ho tshoha : Thothometsa: |
Ho sebetsa 0 ho isa ho 55°C likhato 20-90%, e sa fokotsang 16,000 ft – – |
Storage/ E sa sebetseng -20 ho isa ho 60 ° C 5-90%, e sa fokotseng 40,000ft Ho potlakisa ha 10G (11 ms nako) 10-300Hz 0.5G RMS ho sisinyeha ho sa tloaelehang |
|
Litaba tsa Sephutheloana
-MU1602 / -MU3202
- Lebokose la moamoheli bakeng sa "remote console" x 1
- Adapter ea motlakase e nang le khoele ea motlakase (bakeng sa moamoheli) x 1
- CE-6 6ft Combo KVM cable bakeng sa lebokose la moamoheli x 1
-MU1603 / -MU3203
- Lebokose la moamoheli bakeng sa "remote console" x 2
- Adapter ea motlakase e nang le khoele ea motlakase (bakeng sa moamoheli) x 2
- CE-6 6ft Combo KVM cable bakeng sa lebokose la moamoheli x 2
-MU1604 / -MU3204
- Lebokose la moamoheli bakeng sa "remote console" x 3
- Adapter ea Matla ka / thapo ea matla (bakeng sa moamoheli) x 3
- CE-6 6ft Combo KVM cable bakeng sa lebokose la moamoheli x 3
Matrix Cat6 KVM
<2.2> KVM port & Cat6 dongle connection
Cat6 Dongle
| Tshehetso ea Qeto | Hangata ( Hz ) |
| 1920 x 1080 | 60 |
| 1600 x 1200 | 60 |
| 1440 x 900 | 60 |
| 1280 x 1024 | 60 |
| 1024 x 768 | 60 / 70 / 75 |
<2.3 > Khokahano ea khokahanyo e hole
Remote Console Frequency
| Tshehetso ea Qeto | Hangata ( Hz ) | Max. Cat6 Cable Length ( M ) |
| 1920 x 1080 | 60 | 50 |
| 1920 x 1200 | 60 | 50 |
| 1600 x 1200 | 60 | 100 |
| 1440 x 900 | 60 | 100 |
| 1280 x 1024 | 60 | 150 |
| 1024 x 768 | 60 / 70 / 75 | 150 |
Mokhoa oa ho sebelisa seamoheli ho hokela khomphutha e hole
Moamoheli o fana ka ts'ebetso ea hotkey bakeng sa console e hole. Ka kopo sheba P.21
< 2.4 > KVM Cascade
- Cascade ho fihla ho maemo a 8, li-server tse 256
- Cascading multiple KVM ka CMC-8 cascade cable.
Li-KVM tse senyehileng ho tloha maemong a 2 ho isa ho 8 e tlameha ho ba mehlala ea MU-1602 / MU-3202 kapa M-802 / M-1602.
Ha matrices a mangata a KVM a thula hammoho, master KVM boemong ba 1 e tla nka taolo eohle ea li-switch tsa KVM tse ling (mohlala, boemo ba 2 ho isa ho 8).
Matrix ea makhoba KVM e tla ba mojule oa katoloso ea koung ea master matrix KVM, khomphutha ea mantlha e hole ho KVM ea lekhoba e tla etsoa sehlabelo le ho holofala.
EA-8
■ 8ft Matrix KVM cascade cable
Litlhaloso
| -MU1602 -MU3202 |
-MU1603 -MU3203 |
-MU1604: -MU3204 |
||
| Boema-kepe ba KVM Likou tse 'maloa: Sehokelo : Khokahano : |
16 kapa 32 RJ-45 DVI-D / VGA sehokelo sa dongle ho fihla ho limithara tse 40 (maoto a 132) ka thapo ea Cat6 / Cat5 |
|||
| Local Console : | Ha ho na mofuta oa li-drawer tsa LCD console | |||
| Cat6 Remote Console Nomoro ea boema-kepe bo hole: Lekola boema-kepe : Keyboard & mouse port : Remote I/O : Tšehetso ea tharollo : |
1 bakeng sa -MU1602 / -MU3202 2 bakeng sa -MU1603 / -MU3203 3 bakeng sa -MU1604 / -MU3204 DB15-pin VGA 2 x sehokelo sa mofuta oa USB bakeng sa keyboard le mouse RJ45 ka thapo ea Cat5 / Cat5e / Cat6 ho fihla maotong a 500 16:9 - max. 1920 x 1080 16:10 - max. 1920 x 1200 4:3 - max. 1600 x 1200 |
|||
| Katoloso : | Ho fihla ho li-server tse 256 ka cascade ea maemo a 8 | |||
| Hardware e lumellanang : Tšehetso ea OS: |
HP / IBM / Dell PC, Server le Blade Server LETSATSI / Mac Windows / Linux / Unix / Mac OS |
|||
| Matla Kenyelletso : Tšebeliso : |
Adapter ea matla ea AC Max. 20W | |||
| Tšireletseho ea Taolo : Tikoloho: |
FCC & CE e netefalitsoe RoHS3 & REACH e lumellana |
|||
| Tikolohol Mocheso: Mongobo: Altitude : Ho tshoha : Thothometsa: |
Ho sebetsa 0 ho isa ho 55°C likhato 20-90%, e sa fokotsang 16,000 ft – – |
Storage/ E sa sebetseng -20 ho isa ho 60 ° C 5-90%, e sa fokotseng 40,000ft Ho potlakisa 10G (nako ea 11ms) 10-300Hz 0.5G RMS ho sisinyeha ho sa tloaelehang |
||
< Karolo ea 3 > Tšebeliso
<3.1 > Konopo ya KVM
Matla TSOA
- Tima li-server tsohle le li-switches tsa KVM
- Etsa bonnete ba hore lithapo/lihokelo kaofela li hoketsoe hantle
- Khothalletsa Power ON tatelano ke leihlo, KVM switjha qetellong k'homphieutha
Panel e ka pele - Lipontšo tsa Port LED
| Nomoro ea banka. | 7-Segment BANK LED pontšo |
| Li-LED tsa PC port | Marang-rang: Blue LED e bonts'ang hore PC e hokela boema-kepeng E sebetsa: LED e tala e bonts'ang mocha o khethiloeng Hole: LED ea Orange e bonts'ang hore boema-kepe bo khethoa ke IP / remote console |
| Konopo ea kanale | Tobetsa ho khetha kanale ho tloha ho 01 ho isa ho 32 |
| Konopo ea banka | Khetha banka ho tloha ho 1 ho isa ho 8 |
< 3.2 > Lekunutu
Phasewete e nolofalitsoe ka ho sa feleng, password ea kamehla ke "00000000" e nang le li-zero tse robeli (Se ke oa sebelisa "0" pampiring ea linomoro)
Numella password
- Tobetsa KVM hotkey Scroll Lock + Scroll Lock + U
- Tlosa KVM ka ho tobetsa konopo ea hotkey Scroll Lock + Scroll Lock + P
- Boemong ba SUPERVISOR, kenya "00000000" li-zero tse robeli sebakeng sa lebitso la mosebelisi le password (Se ke oa sebelisa "0" pampiring ea linomoro)
- Boemong ba USER, tobetsa Space bar + Kena ka lebitso la mosebelisi & sebaka sa password
Keletso: Ho tsoa ka boiketsetso ka mor'a metsotso e 10 ea ho se sebetse
Ipehele lebitso la hau la mosebelisi le password
- Kena ho KVM boemong ba SUPERVISOR ka ho tobetsa "00000000" li-zero tse robeli lebitsong la mosebelisi le sebaka sa password.
- Letsetsa lethathamo la KVM OSD ka ho tobetsa konopo ea hotkey ea KVM Scroll Lock + Scroll Lock + Space Bar.
- Tobetsa F1 ho MAIN MENU
- Khetha "USER SECURITY"
- Beha senotlolo boemong ba SUPERVISOR & USER
a. Moleng o kaholimo ho le letšehali "S" (SUPERVISOR), tobetsa Enter ho ipehela lebitso la mosebelisi le password.
b. Meleng ea 1 ho isa ho 8 (USER), tobetsa Enter ho ipehela lebitso la hau la mosebelisi le password - Tobetsa Enter ho boloka litlhophiso kapa tobetsa Esc ho hlakola tokiso ntle le phetoho
Tlhaloso: a. Blank o na le lintlha, athe SPACE ha e na eona
b. Tobetsa konopo efe kapa efe ea alphanumeric ho ea nthong e latelang. SPACE e nkuoa joalo ka setho se nepahetseng
Fetola password ea hau
- Kena ho KVM boemong ba SUPERVISOR ka ho tobetsa lebitso la hau la mosebelisi le password
- Letsetsa lethathamo la KVM OSD ka ho tobetsa konopo ea hotkey ea KVM Scroll Lock + Scroll Lock + Space Bar.
- Tobetsa F1 ho MAIN MENU
- Khetha "USER SECURITY"
- Fetola password boemong ba SUPERVISOR & USER
a. Moleng o kaholimo ho le letšehali "S" (SUPERVISOR), tobetsa Enter ho fetola lebitso la mosebelisi le password
b. Meleng ea 1 ho isa ho 8 (USER), tobetsa Enter ho fetola lebitso la hau la mosebelisi le password - Tobetsa Enter ho boloka litlhophiso kapa tobetsa Esc ho hlakola tokiso ntle le phetoho
Tlhaloso: a. Blank o na le lintlha, athe SPACE ha e na eona
b. Tobetsa konopo efe kapa efe ea alphanumeric ho ea nthong e latelang. SPACE e nkuoa joalo ka setho se nepahetseng
Tlosa phasewete ea hau
- Tobetsa KVM hotkey Scroll Lock + Scroll Lock + U
- Tlisa KVM ka ho tobetsa KVM hotkey Scroll Lock + Scroll Lock + P
- Ha o hloke lebitso la mosebelisi le phasewete ho fihlella menyu ea KVM OSD
Lebala phasewete ea hau
Ka kopo ikopanye le morekisi oa hau bakeng sa ts'ehetso e eketsehileng
Keletso:
- U tlameha ho tobetsa hotkey ea KVM nakong ea metsotsoana e 2
- Ho tla utloahala molumo oa beep bakeng sa ho atleha ho kena hotkey ea KVM
< 3.3 > KVM OSD
| Menyu ea OSD
Ts'ebetso ea OSD |
 |
 haufi le lebitso la tsamaiso |
PC e buletsoe |
 haufi le lebitso la tsamaiso |
PC e khethiloe |
| F1 | Fumana F1 MAIN MENU |
| F2 | Tlosa ho menu ea OSD |
| F3 | Lenaneo le fetileng |
| Esc | Hlakola / Tlohela |
| Kena | Qetella / Fetolela koung e khethiloeng |
 |
Fetohela ho koung e fetileng kapa e latelang |
| PgUp/PgDn | Fetohela bankeng e fetileng kapa bankeng e latelang |
| 1/2/3/4 | Bontša boema-kepe 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32 Tlhokomeliso: Bontša boema-kepe ba 17 ~ 32 bakeng sa mohlala oa boema-kepe ba 32 feela |
F1 Main menu
| 01 PUO | Phetoho ea puo ea OSD |
| 02 PORT NAME FETISA | Hlalosa lebitso la boema-kepe |
| 03 PATLISISO YA BOIPENG | Ho batla ka potlako ka lebitso la port |
| 04 TŠIRELETSO MOSEBETSI | Fetola senotlolo |
| 05 LIKETSAHALO TSA KATLEHO | Hlalosa bolaoli ba phihlello ea basebelisi |
| 06 HOTKEY | Fetola hotkey |
| 07 LIHLOKO TSA NAKO | Fetola karohano ea nako ea ho skena |
| 08 OSD TWEBA | Fetola lebelo la toeba la OSD |
< 3.4 > KVM Hotkey & Remote Console Hotkey
| Hotkey ea lehae ea Console | Mosebetsi |
| Moqolo Lock + Moqolo Lock + Sebaka sa Sebaka | Ho letsetsa OSD menu |
| Toeba ea konopo ea ho le letona + Esc | Ho letsetsa OSD menu |
Moqolo Lock + Moqolo Lock +  |
Fetohela boema-kepeng bo fetileng |
Moqolo Lock + Moqolo Lock +  |
Fetohela boema-kepeng bo latelang |
| Moqolo Lock + Moqolo Lock + PgUp / PgDn | Fetohela bankeng e fetileng kapa bankeng e latelang |
| Moqolo Lock + Moqolo Lock + Nomoro ea banka. + Nomoro ea boema-kepe. | Fetohela ho koung e itseng |
| Moqolo Lock + Moqolo Lock + B | Buzzer, 'me U TŠOME * Ka nepo, buzzer e BUTSE |
| Moqolo Lock + Moqolo Lock + P | Tsoa ka ntle ho KVM haeba ts'ireletso ea password e ON. Hlahisa lifensetere tsa boemo |
Li-hotkeys tse tsoetseng pele (bakeng sa ho kena ha Mookameli feela)
| Moqolo Lock + Moqolo Lock + S | Kenya tšebetsong mokhoa oa ho hlahloba ka boits'oaro bakeng sa li-server tse hoketsoeng *Tobetsa konopo efe kapa efe ho tsoa ho mokhoa oa ho hlahloba othomathike |
| Moqolo Lock + Moqolo Lock + R | Seta li-setting tsohle tsa KVM hore e be tsa kamehla tsa feme * Ntle le litlhophiso tsa Ts'ireletso ea Basebelisi |
| Moqolo Lock + Moqolo Lock + U | Tlosa le ho nolofalletsa ts'ireletso ea password *Tshireletso ea kamehla e BUTSE |
| Moqolo Lock + Moqolo Lock + L | Ho bulela/ho tima tshebetso ya ho boloka skrine le metsotso e 10 ho tsoa ka boits'oaro *Mohloli oa kamehla oa ho boloka skrine o TIMA |
Maikutlo:
- Example ea “Moqolo Lock + Scroll Lock + Bank No. + Boema-kepe ba no.
- Nomoro ea Banka: 1 ho isa ho 8
- Nomoro ea boema-kepe: 01 ho isa ho 16
– mohlala Bank 1 Port 4 : Moqolo Lock + Moqolo Lock + 1 + 0 + 4
– mohlala Bank 2 Port 16 : Moqolo Lock + Moqolo Lock + 2 + 1 + 6 - O tlameha ho tobetsa hotkey nakong ea metsotsoana e 2
- Ho tla utloahala molumo oa beep bakeng sa ho kena ka katleho
- Letlapa la dinomoro ha le tshehetswe, ha skrineng sa OSD, dinotlolo tsa metsu, PgUp, PgDn, le Enter di tsheheditswe.
| Remote Console Hotkey | Mosebetsi |
| Moqolo Lock + Moqolo Lock + C | Fetolela switjha lipakeng tsa boema-kepe bo hole le ba lehae |
| Moqolo Lock + Scroll Lock + Q | bulela buzzer, 'me U ILE *Molaetsa oa kamehla o BUTSE |
| Moqolo Lock + Moqolo Lock + S | Kenya tšebetsong mokhoa oa ho hlahloba ka boits'oaro bakeng sa boema-kepe bo hole le ba lehae * Nako ea nako ea ho hlahloba ke metsotsoana e 5 |
| Moqolo Lock + Moqolo Lock + A | Fetola lets'oao la video |
Ka boomo Left Blank
Khampani e na le tokelo ea ho fetola lintlha tsa sehlahisoa ntle le tsebiso esale pele, 'me ha e nke boikarabello bakeng sa phoso efe kapa efe e ka hlahang khatisong ena.
Mabitso ohle a marang-rang, li-logo, le matšoao a ngolisitsoeng ke thepa ea beng ba tsona ka ho fapana.
Copyright 2021 Austin Hughes Electronics Ltd. Litokelo tsohle li sirelelitsoe.
www.austin-hughes.com
Litokomane / Lisebelisoa
 |
Cyberview KVM Rear Kit Version bakeng sa Drawer ea LCD Console [pdf] Bukana ea Mosebelisi Drawer, Console Drawer, LCD Console Drawer, KVM Rear Kit |
