CSM SBM_I bula HV Split Breakout Module
Litlhaloso
- Lebitso la Sehlahisoa: HV Split Breakout Module (SBM_I e butsoe)
- Kopo: High-voltage likopo
- Setifikeiti sa Polokeho: E netefalitsoe bakeng sa matla a holimotage sebelisa
- Moetsi: CSM GmbH
Litaelo tsa Tšebeliso ea Sehlahisoa
Litaelo tsa Tšireletseho
Pele o sebelisa HV Split Breakout Module (SBM_I e bulehileng), ho bohlokoa ho latela litataiso tsa polokeho tse fanoeng:
- Sebelisa feela basebetsi ba tšoanelehang le ba koetlisitsoeng bakeng sa ho sebetsana le ho kenya.
- Netefatsa hore sesebelisoa ha se na matla pele se holisoa.
- Sebelisa thepa e loketseng ea ho hlomamisa bakeng sa ho kenya ka mokhoa o sireletsehileng.
- Lekola mocheso ho thibela mocheso o feteletseng.
- Apara liatlana tsa polokeho ha u tšoara mojule, haholo haeba esale e sebetsa sebakeng se nang le mocheso o phahameng.
Ho kenya
- Netefatsa hore HV SBM_I e butsoeng ha e na matla pele e behoa.
- Latela litaelo tse nepahetseng tsa ho instola tse fanoeng bukeng ea mosebelisi.
- Koala mojule ka mokhoa o sireletsehileng u sebelisa lisebelisoa tse loketseng tsa ho kenya tse kang li-screw, linate le lithae tsa cable.
Tlhokomelo
Ho boloka polokeho ea ts'ebetso:
- Etsa tlhahlobo ea ho itšehla thajana ho latela EN 61010 bonyane hang ka selemo.
- Kamehla bala le ho utloisisa litokomane tse fanoeng pele ho ts'ebetso ea pele.
- Ikopanye le CSM GmbH bakeng sa lipotso kapa litlhaloso tse ling.
LBH
- P: Teko ea ho itšehla thajana e lokela ho etsoa hangata hakae?
A: Teko ea ho itšehla thajana e lokela ho etsoa bonyane hang ka selemo ho latela EN 61010. - P: Ho lokela ho etsoa eng haeba sesebelisoa se futhumatsa haholo nakong ea ts'ebetso?
A: Fokotsa kapa u sitise ho phalla ha hona joale ka shunt ho thibela ho eketseha ha mocheso. Ela hloko mocheso ka linako tsohle ho qoba ho feta menyako.
"`
Litaelo tsa Tšireletseho
HV Split Breakout Module (SBM_I e butswe)
Litaelo tse akaretsang tsa polokeho
Ka kopo ela hloko litaelo tse latelang tsa polokeho hammoho le tlhahisoleseding e tobileng mabapi le polokeho litokomaneng tse tsamaeang le sena.
| TEMOSO! | |
 |
HV Split Breakout Modules tsa mofuta oa HV SBM_I open li sebelisoa ka matla a holimotage likopo.
Tšebeliso e fosahetseng e ka baka lits'oants'o tsa motlakase tse behang bophelo kotsing.
|
| TEMOSO! | |
|
|
Ho hloella ka mokhoa o sa nepahalang ho kenyelletsa kotsi ea litšitiso tsa motlakase tse behang bophelo kotsing.
Lintlha tse latelang li tlameha ho hlokomeloa bakeng sa high-voltagho kenya e-Safe mounting:
|
| TEMOSO! | |
|
Haeba e phahameng-voltagLithapo tsa motlakase kapa li-busbars ha li felisoe matla, ho na le kotsi ea ho ama ka phoso mabitso a sa keneng ka matla a phahameng.tage ka khona.
Haeba sesebelisoa se sa felisoe matla, ho na le kotsi ea ho tsosoa ha motlakase ka bophelo!
|
| TEMOSO! | |
|
|
Mohala oa khokahano lipakeng tsa HV SBM_I open le HV Split Acquisition Module (HV SAM) o na le sehokelo sa HV ka lehlakoreng la mojule oa tekanyo.
Haeba sehokelo sa HV se sa hokeloa, ho ka ba le kotsi ea ho tsosoa ke motlakase!
|
| TEMOSO! | |
|
|
Thempereichara ea ka hare ea HV SBM_I e bulehileng ha ea lokela ho feta +120 °C. Hang ha mocheso oa shunt o feta boleng bona, mochine oa tekanyo ea HV SAM o romela khoutu ea phoso "0x8001" ho e-na le litekanyetso tse lekantsoeng tsa U le I. Hangata mosebelisi ha a bone khoutu ena ea phoso empa molaetsa oa phoso " THERMAL_OVERLOAD” e entsoeng ho tsoa ho DBC kapa A2L file. Lintlha tsena li romelloa ho fihlela mocheso oa shunt o theoha ka tlase ho +115 ° C hape.
Ho feta mocheso o boletsoeng ho senya ts'ireletso ea ts'ebetso ea HV SBM_I e bulehileng. Ho na le likotsi tse kenyelletsang ts'oaetso ea motlakase e behang bophelo kotsing le likotsi tsa mollo.
|
| TLHOKOMELO! | ||
|
|
HV SBM_I Open e ka futhumatsa haholo haeba e sebelisoa sebakeng se itseng sa mosebetsi (mohlala, kamore ea enjene). Shunt e ka boela ea futhumatsa haholo nakong ea ts'ebetso tlas'a mojaro o phahameng.
Ho ama bokaholimo ba shunt ho ka baka cheso e tebileng.
|
|
- Sebelisa feela basebetsi ba tšoanelehang le ba koetlisitsoeng bakeng sa ho sebetsana le HV Split Breakout Modules.
- Netefatsa hore HV Split Breakout Modules e sebetsa feela ka har'a mocheso oa ho sebetsa oa -40 °C ho ea ho +120 °C le mongobo o lekanyelitsoeng oa max. 95% (e sa fokotseng).
- Ho netefatsa polokeho ea ts'ebetso, tlhahlobo ea ho itšehla thajana ho latela khatiso ea morao-rao ea EN 61010 e tlameha ho etsoa bonyane hang ka selemo.
- Litokomane kaofela tse fanoeng ka HV Split Breakout Modules li tlameha ho baloa ka botlalo pele ho ts'ebetso ea pele. Basebeletsi ba sebetsang ba tlameha ho rutoa ka tsela e nepahetseng. Ka kopo ikopanye le CSM GmbH ka lipotso tse ling hape.
Khamphani ea rona e netefalitsoe.
www.tuv-sud.com/ms-cert
Raiffeisenstr. 36 • 70794 Filderstadt • Jeremane
+49 711 77 96 40 sales@csm.de www.csm.de
Matšoao ohle a boletsoeng ke thepa ea beng ba ona. Tokomane ena e ka fetoha ntle le tsebiso.
Copyright © 2024 CSM Computer-Systeme-Messtechnik GmbH
HV_SBM_open_SI_0110_EN_Serie 2024-08-20
Litokomane / Lisebelisoa
 |
CSM SBM_I bula HV Split Breakout Module [pdf] Buka ea Mong'a HV SBM_I bula, SBM_I bula HV Split Breakout Module, SBM_I bula, HV Split Breakout Module, Split Breakout Module, Breakout Module, Module |
