Autonics LCD Pontšo ea PID Bukana ea Taolo ea Mocheso oa Mocheso
Mehopolo ea Tšireletseho
- Ka kopo hlokomela lintlha tsohle tsa polokeho bakeng sa ts'ebetso e sireletsehileng le e nepahetseng ea sehlahisoa ho qoba likotsi.
- Tlhokomelo ea polokeho e arotsoe ka tsela e latelang. Tlhokomeliso : Ho hlōleha ho latela litaelo tsena ho ka baka kotsi e mpe kapa lefu. Tlhokomeliso : Ho hloleha ho latela litaelo tsena ho ka baka kotsi kapa tšenyo ea sehlahisoa.
- Matšoao a sebelisitsoeng bukeng ea sehlahisoa le litaelo a emela tse latelang. tlhokomeliso: letshwao le emela tlhokomeliso ka lebaka la maemo a ikgethang ao ho ona kotsi e ka bang teng.
Tlhokomeliso :
- Sesebelisoa se sireletsehileng se tlameha ho kengoa ha ho sebelisoa sesebelisoa ka mochini o ka bakang kotsi e mpe kapa tahlehelo e kholo ea moruo. (mohlala, taolo ea matla a nyutlelie, thepa ea bongaka, likepe, makoloi, literene, lifofane, lisebelisoa tsa ho tuka, lisebelisoa tsa polokeho, lisebelisoa tsa botlokotsebe / likoluoa, jj. Ho hloleha ho latela taelo ena ho ka baka mollo, likotsi tsa botho, kapa tahlehelo ea moruo.
- Kenya lenaneng la lisebelisoa hore u le sebelise Ho hloleha ho latela taelo ena ho ka baka motlakase.
- Se ke oa hokela, oa lokisa kapa oa lekola yuniti ha o ntse o hokeloe mohloling oa motlakase. Ho hloleha ho latela taelo ena ho ka baka ts'ohlo ea motlakase kapa mollo.
- Sheba 'Likhokahanyo' pele u kopanya. Ho hloleha ho latela taelo ena ho ka baka mollo.
- Se ke oa qhaqholla kapa oa fetola yuniti. Ho hloleha ho latela taelo ena ho ka baka ts'ohlo ea motlakase kapa mollo.
Tlhokomeliso :
- Ha o hokela tlhahiso ea motlakase le tlhahiso ea phetisetso, sebelisa thapo ea AWG 20 (0.50mm2) kapa ho feta 'me u tiise seporo sa terminal ka torque e tiisang ea 0.74 ho isa ho 0.90Nm. Ha o hokela senotlolo sa kutlo le khokahano ntle le thapo e inehetseng, sebelisa cable ea AWG 28 ho isa ho 16 ebe o tiisa sekontiri se matla ka torque e tiisang ea 0.74 ho isa ho 0.90Nm.
- Sebelisa yuniti ka har'a litlhaloso tse lekantsoeng. Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa.
- Sebelisa lesela le ommeng ho hloekisa yuniti, 'me u se ke ua sebelisa metsi kapa mokelikeli o manyolo. Ho hloleha ho latela taelo ena ho ka baka ts'ohlo ea motlakase kapa mollo.
- Se ke oa sebelisa sesebelisoa sebakeng seo ho ka chesang / ho phatlohang / khase e senyang, mongobo, khanya ea letsatsi, mocheso o khanyang, ho thothomela, tšusumetso kapa letsoai le ka bang teng. Ho hloleha ho latela taelo ena ho ka baka mollo kapa ho phatloha.
- Boloka tšepe ea tšepe, lerōle le masala a terata hore a se ke a phallela ka har'a yuniti. Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa.
Ho Odara Boitsebiso
TX 4 S 1 4 R
Tlhahiso ea taolo:
- R : Tlhahiso ea relay
- S: SSR khumo khumo
- C : Khetho e teng ea hajoale kapa tlhahiso ea drive ea SSR
Phepelo ea motlakase :
- 4 : 100-240VAC 50/60Hz
Khetho ea khetho:
- 1 : Alamo khumo 1
- 2 : Alamo khumo 1 + Alarm khumo 2
- A : Alarm khumo 1 + Alarm khumo 2 + Trans. tlhahiso
- B : Tlhahiso ea alamo 1 + Alamo e hlahisang 2 + RS485 com. tlhahiso
Boholo :
- S: Molumo o moholo W48 × H48mm
- M : Molumo o moholo W72 × H72mm
- H: Molumo o moholo W48 × H96mm
- L: Molumo o moholo W96 × H96mm
Chelete:
- 4 : 9999 (linomoro tse 4)
Ntho :
- TX: LCD e bonts'a mocheso oa mocheso oa PID
Input Type le Range
| Mofuta oa ho kenya | Ntlha ea boleng | Pontšo | Input fapaneng (() | Input fapaneng (℉) | |
| Thermocouple | K (CA) | 1 | KCA.H | - lilemo tse 50 ho isa ho tse 1200 | - lilemo tse 58 ho isa ho tse 2192 |
| 0.1 | KCA.L | - lilemo tse 50.0 ho isa ho tse 999.9 | - lilemo tse 58.0 ho isa ho tse 999.9 | ||
| J (IC) | 1 | JIC.H | - lilemo tse 30 ho isa ho tse 800 | - lilemo tse 22 ho isa ho tse 1472 | |
| 0.1 | JICL | - lilemo tse 30.0 ho isa ho tse 800.0 | - lilemo tse 22.0 ho isa ho tse 999.9 | ||
| L (IC) | 1 | LI.H | - lilemo tse 40 ho isa ho tse 800 | - lilemo tse 40 ho isa ho tse 1472 | |
| 0.1 | LIC.L | - lilemo tse 40.0 ho isa ho tse 800.0 | 40.0 ho ea ho 999.9 | ||
| T (CC) | 1 | TCC.H | - lilemo tse 50 ho isa ho tse 400 | - lilemo tse 58 ho isa ho tse 752 | |
| 0.1 | TCC.L | - lilemo tse 50.0 ho isa ho tse 400.0 | - lilemo tse 58.0 ho isa ho tse 752.0 | ||
| R (PR) | 1 | RPR | 0 ho ea ho 1700 | 32 ho ea ho 3092 | |
| TSE (PR) | 1 | 5PR | 0 ho ea ho 1700 | 32 ho ea ho 3092 | |
| RTD | EA-100-DP | 1 | Dpt.H | - lilemo tse 100 ho isa ho tse 400 | - lilemo tse 148 ho isa ho tse 752 |
| 0.1 | Dpt.L | - lilemo tse 100.0 ho isa ho tse 400.0 | - lilemo tse 148.0 ho isa ho tse 752.0 | ||
| Cu50Ω | 1 | CU5.H | - lilemo tse 50 ho isa ho tse 200 | - lilemo tse 58 ho isa ho tse 392 | |
| 0.1 | CU5.L | - lilemo tse 50.0 ho isa ho tse 200.0 | - lilemo tse 58.0 ho isa ho tse 392.0 | ||
- Lintlha tse ka holimo li ka fetoha 'me mefuta e meng e ka emisoa ntle le tsebiso.
- Etsa bonnete ba hore o latela litemoso tse ngotsoeng bukeng ea litaelo le litlhaloso tsa mahlale (khathaloko, leqephe la lapeng).
Litlhaloso
| Letoto | TSOANG | EA-4-MF | TX4H | TSOANG | ||
| Phepelo ea motlakase | 100-240VAC 50/60Hz | |||||
| Lumella voltage fapaneng | 90 ho isa ho 110% ea vol e lekantsoengtage | |||||
| Tšebeliso ea matla | Boholo. 8VA | |||||
| Mokhoa oa ho bonts'a | Likarolo tsa 11 (PV: e tšoeu, SV: e tala), pontšo e 'ngoe (bosehla) ka mokhoa oa LCD1 | |||||
| Boholo ba sebopeho | PV (W × H) | 7.2 × 14 limilimithara | 10.7 × 17.3 limilimithara | 7.2 × 15.8 limilimithara | 16 × 26.8 limilimithara | |
| SV (W × H) | 3.9 × 7.6 limilimithara | 6.8 × 11 limilimithara | 6.2 × 13.7 limilimithara | 10.7 × 17.8 limilimithara | ||
| Mofuta oa ho kenya | RTD | DPt100Ω, Cu50Ω (e lumeletsoeng mola ho hanyetsa max. 5Ω) | ||||
| TC | EA (K), J (IC), L (IC), T (CC), R (PR), S (PR) | |||||
| Bontša ho nepahala ※2 | RTD |
|
||||
| TC | ||||||
| Laola tlhahiso | Relay | 250VAC 3A, 30VDC 3A, 1a | ||||
| SSR | Boholo. 12VDC ± 2V 20mA | Boholo. 13VDC ± 3V 20mA | ||||
| Hona joale | DC4-20mA kapa DC0-20mA (mojaro oa ho hanyetsa max. 500Ω) | |||||
| Khetho ea khetho | Phallo ea alamo | AL1, AL2: 250VAC 3A, 30VDC 3A 1a | ||||
| Fetela. tlhahiso | DC4-20mA (mojaro oa ho hanyetsa max. 500Ω, ho nepahala ha tlhahiso: ± 0.3% FS) | |||||
| Com. tlhahiso | Tlhahiso ea RS485 (mokhoa oa Modbus RTU) | |||||
| Mokhoa oa ho laola | ON / Off taolo, P, PI, PD, PID taolo | |||||
| Hysteresis | 1 ho ea ho 100 ℃ / ℉ (0.1 ho 50.0 ℃ / ℉) polygonal | |||||
| Sehlopha sa Proportional (P) | 0.1 ho isa ho 999.9 ℃ / ℉ | |||||
| Nako ea bohlokoa (I) | 0 ho isa ho 9999 sec | |||||
| Nako e tsoang ho (D) | 0 ho isa ho 9999 sec | |||||
| Nako ea taolo (T) | 0.5 ho isa ho 120.0 sec | |||||
| Seta bocha ka letsoho | 0.0 ho isa ho 100.0% | |||||
| Sampnako ea ling | 50ms | |||||
| Matla a dielectric | 3,000VAC 50 / 60Hz bakeng sa mets e 1 (lipakeng tsa potoloho ea mantlha le potoloho ea bobeli) | |||||
| Ho thothomela | 0.75 limilimithara amplitude khafetsa 5 ho isa ho 55Hz (bakeng sa 1 min) ho X, Y, Z e 'ngoe le e' ngoe tataiso bakeng sa lihora tse 2 | |||||
| Relay bophelo potoloho | Mechini | HO TSWA, AL1 / 2: Tshebetso ya mets tse 5,000,000 | ||||
| Motlakase | HO TSOA, AL1 / 2: mets 200,000 (250VAC 3A resistance load) | |||||
| Insulation resistance | Min. 100MΩ (ho 500VDC megger) | |||||
| Ho hanyetsa lerata | Lerata le bōpehileng joaloka sekwere ke simulator ea lerata (pulse bophara 1㎲) ± 2kV R-phase, S-phase | |||||
| Ho boloka mohopolo | Approx. Lilemo tse 10 (mofuta oa mohopolo oa semiconductor o sa fetoheng) | |||||
| Tikoloho | Mocheso oa tikoloho. | -10 ho isa ho 50 ℃, polokelo: -20 ho isa ho 60 ℃ | ||||
| Hmi ea tikoloho. | 35 ho isa ho 85% RH, polokelo: 35 ho isa ho 85% RH | |||||
| Sebopeho sa ts'ireletso | IP50 (karolo e ka pele, litekanyetso tsa IEC) | |||||
| Mofuta oa insulation | Ho kwahela habeli (letšoao:, matla a motlakase pakeng tsa potoloho ea mantlha le potoloho ea bobeli: 3kV) | |||||
| Kamohelo |  |
|||||
| Boima ※ | Ho lekana. 146.1g (approx. 86.7g) | Approx. 233g (hoo e ka bang 143g) | Approx. 214g (hoo e ka bang 133g) | Approx. 290g (hoo e ka bang 206g) | ||
- Ha o sebelisa sesebelisoa ka mocheso o tlase (ka tlase ho 0 ℃), potoloho ea pontšo e lieha.
Taolo ea taolo e sebetsa ka mokhoa o tloaelehileng. - Mocheso oa kamore (23 ℃ ± 5 ℃)
- TC R (PR), S (PR), ka tlase ho 200 ℃: (PV ± 0.5% kapa ± 3 ℃, khetha e phahameng) ± 1-digit, over 200 ℃: (PV ± 0.5% or ± 2 ℃, khetha e phahameng) ± 1-digit
- TC L (IC), RTD Cu50Ω: (PV ± 0.5% kapa ± 2 ℃, khetha e phahameng) ± 1-digit
- Ho tsoa mochesong oa kamore
- TC R (PR), S (PR): (PV ± 1.0% kapa ± 5 ℃, khetha e phahameng) ± 1-digit
- TC L (IC), RTD Cu50Ω: (PV ± 0.5% kapa ± 3 ℃, khetha e phahameng) ± 1 digit
- Boima ba eona bo kenyelletsa ho paka. Boima ba masakaneng ke ba yuniti feela.
- Khanyetso ea tikoloho e lekantsoe ntle le ho bata kapa ho bata.
Tlhaloso ea Yuniti
- Karolo ea boleng bo lekantsoeng (PV): Mokhoa oa RUN: E bonts'a boleng bo lekantsoeng ba hajoale (PV) .SETTING mode: E bonts'a mekhahlelo.
- Sesebelisoa sa mocheso (℃ / ℉): E bontša sete ea mocheso e behiloeng joalo ka yuniti ea mocheso [UNIT] ea sehlopha sa parameter 2.
- Ho beha karolo ea boleng ba ho beha (SV): RUN mode: E bonts'a boleng ba ho ipehela (SV). SETTING mode: E bontša boemo ba paramethara.
- Sesebelisoa sa ho lokisa ka boithaopo Ho phatsima nakong ea ho itokisetsa likoloi metsotsoana e meng le e meng e 1.
- Letšoao la taolo ea tlhahiso (OUT1): EA BULA ha taolo e tsoa.
- HO BULA HA MV e feta 3.0% ho laola potoloho / mohato oa SSR mokhoa oa tlhahiso ea drive
- Letšoao la alamo (AL1, AL2): BULA HA ha alamo e tsamaellanang e bulela.
- senotlolo: E kena sehlopheng sa paramethara, e khutlela ho RUN mode, e tsamaisa mekhahlelo, ebe e boloka boleng ba boemo.
- Ho beha senotlolo sa phetoho ea boleng: E kenya SV mode ea ho tsamaisa ebe o tsamaisa linomoro.
- Senotlolo sa ho kenya sa Digital: Tobetsa likonopo tsa + metsotsoana e 3 ho etsa likarolo tsa senotlolo sa ho kenya tsa dijithale tse behiloeng ho senotlolo sa ho kenya sa dijithale [DI-K] sa sehlopha sa paramethara 2 (RUN / STOP, hlakisa tlhahiso ea alamo, ho ithula ka bo eona).
- Boema-kepe ba PC: Ke bakeng sa puisano ea serial ho beha parameter le ho beha leihlo ke DAQMaster e kentsoeng PC. Sebelisa sena bakeng sa khokahano EXT-US (cable converter, e rekisoang ka thoko) + SCM-US (USB / Serial converter, e rekisoang ka thoko).
Ho kenya
- TX4S (48 × 48mm) letoto lena
- Lihlooho tse ling
- Kenya yuniti ka phanele, tlama bracket ka ho sututsa ka lisebelisoa tse nang le (-) mokhanni.
Lenaneo le Akaretsang la Tsamaiso ea Sesebelisoa [DAQMaster]
DAQMaster ke software e akaretsang ea taolo ea lisebelisoa bakeng sa ho beha mekhahlelo le lits'ebetso tsa ho lekola. DAQMaster e ka jarollwa ho file ea rona ea web site at www.autonics.com.
| Ntho | Litekanyetso tse fokolang |
| Tsamaiso | Khomphutha e sebetsanang le IBM PC e nang le Pentium Ⅲ kapa kaholimo |
| Ts'ebetso | Windows 98 / NT / XP / Vista / 7/8/10 |
| Mohopolo | 256MB+ |
| Hard disk | 1GB + ea sebaka se fumanehang sa hard disk |
| VGA | Qeto: 1024×768 kapa ho feta |
| Ba bang | RS232C serial port (9-pin), boema-kepe ba USB |
Lihokelo
TX4S Letoto
- TSOA
- SSR
- 12VDC ± 2V 20mA Max.
- Hona joale
- DC0 / 4-20mA
- Mojaro 500ΩMax.
- Relay
- 250VAC 3A 1a
- 30VDC 3A 1a
- MORAPO OHANYETSANG
Letoto la TX4M
TX4H, L Series
Litekanyo
TSOANG
EA-4-MF
Brakete
- TX4S Letoto
- Lihlahisoa tsa TX4M / H / L
- TX4H
- TSOANG
Sehiloeng ka phanele
Sekoaelo sa terminal (se rekisoa ka thoko)
- RSA-SEKOAHELONG (48 × 48mm)
- RMA-SEKOAHELONG (72 × 72mm)
- RHA-SEKOAHELONG (48 × 96mm)
- RLA-SEKOAHELONG (96 × 96mm)
Ho beha SV
- Ho fetola mocheso o setiloeng ho tloha ho 210 ℃ ho isa ho 250 ℃
- Haeba ho se na kenyelletso ea senotlolo bakeng sa metsotsoana e 3 ha o ntse o seta SV, maemo a macha a tla sebelisoa 'me yuniti e tla khutlela mokhoeng oa RUN.
Feme ea kamehla
Boemo ba SV
|
Paramethara |
Boemo ba feme |
| – | 0 |
Sehlopha sa 1 sehlopha
|
Paramethara |
Boemo ba feme |
| AL1 | 1250 |
| AL2 | |
| AT | TLOA |
| P | 10.0 |
| 1 | 240 |
| D | 49 |
| PHOMOLO | 50.0 |
| HY5 | 2 |
Sehlopha sa 2 sehlopha
|
Paramethara |
Boemo ba feme |
Paramethara |
Boemo ba feme |
| IN-T | KCA.H | AHY5 | 1 |
| THUTO | C | LBA.T | 0 |
| KA-B | 0 | LBA.T | 2 |
| MAVF | 0.1 | FS-L | -50 |
| L-SV | -50 | FS-H | 1200 |
| H-SV | 1200 | ADR5 | 1 |
| O-FT | MOCHESO | BPS5 | 96 |
| C-MD | PID | PRTY | HA HO MOTHO |
| TSOA | LEKHOTLA | 5TP | 2 |
| SSR.M | 5TND | R5W.T | 20 |
| MA | 4-20 | COMW | EnaA |
| T | 20.0 (Lesokoana) | EA-K | EMA |
| 2.0 (koloi ea SSR) | ErMV | 0.0 | |
| AL-1 | AM! A. | LOC | TLOA |
| AL-2 | AM2.A | ——- | ——– |
Lihlopha tsa Parameter
- Odara ea ho seta paramethara Paramente ea 2 sehlopha Paramente ea 1 sehlopha sa SV
- Mefuta eohle e amana. Beha mekhahlelo ka tatellano e kaholimo.
- Haeba ho se na kenyelletso ea senotlolo bakeng sa metsotsoana e 30 ha o ntse o beha li-parameter, li-setting tse ncha ha li natsoe, mme yuniti e tla khutlela mokhoeng oa RUN ka li-setting tse fetileng.
- Ha o khutlela ho RUN mode ka ho ts'oara konopo ho feta 3 sec, tobetsa konopo nakong ea 1 sec ho kenya paramethara ea pele ea sehlopha sa parameter se fetileng.
- Tšoara linotlolo tsa + + metsotsoana e 5 ka RUN mode, ho kenya semmuso paramethara. Khetha 'YES' 'me mekhahlelo eohle e hlophisoa bocha e le ea kamehla ea feme.
Boemo ba sehlopha sa 2:
- Tobetsa konopo efe kapa efe hara
- Tobetsa konopo hang kamora ho fetola boleng ba ho seta, ho boloka boleng ba ho seta ebe o fetela ho parameter e latelang
- Tšoara senotlolo bakeng sa metsotsoana e 3 ho boloka boleng ba ho seta ebe o khutlela mokhoeng oa RUN kamora ho fetola boleng ba sethala.
- Mekhahlelo e nang le matheba e kanna ea se hlahe ka mofuta oa mofuta kapa li-parameter tse ling
- Ho beha mefuta: Sheba ho 'Type Input Type And Range'.
- Ha o fetola boleng ba maemo, 5V, [IN-B, H-5V / L-5V, AL1, AL2, LBaB, AHYS] mekhahlelo ea sehlopha sa parameter 2 e hlophisitsoe bocha.
- Ha o fetola boleng ba maemo, 5V, [IN-B, H-5V / L-5V, AL1, AL2, LBaB, AHYS] mekhahlelo ea sehlopha sa parameter 2 e hlophisitsoe bocha.
- Ho ipehela mefuta: -999 ho 999 ℃ / ℉ (-199.9 ho 999.9 ℃ / ℉
- Ho ipehela mefuta: 0.1 ho isa ho 120.0 sec
- Litlhophiso: Ka har'a mocheso oa sensor e 'ngoe le e' ngoe [H-5V≥ (L 5V + 1digit)]
- Ha o fetola boleng ba ho ipehela, le 5V, H-5V, 5V e seta bocha joaloka H-5V.
- Ha o fetola boleng ba peakanyo, [ErMV] e seta bocha ka) 0, [DI-K] e seta bocha e le TSOANG.
- E hlaha feela ka khetho e khethiloeng ea hajoale kapa SSR drive drive (TX4 - 4C).
- E hlaha feela ka mofuta oa SSR drive output (TX4 - 4S).
- E hlaha feela ha taolo e tsoa [OUT] e behiloe joalo ka CURR
- E hlaha feela ha mokhoa oa taolo [C-MD] e le PID.
- Ha e hlahe ha tlhahiso ea drive ea SSR e behiloe ka CYCL, kapa PHAS.
- Tobetsa konopo ho fetolela 'Alarm operation' 'Alarm option'.
- Seta mokhoa o ts'oana le ts'ebetso ea alamo ea AL1 [AL-1].
- E hlaha feela ka alamo e hlahisang mefuta ea 2.
- Ho ipehela mefuta: 1 ho 100 ℃ / ℉ (0.1 ho 50.0 ℃ / ℉)
- Ha e hlahe ha tšebetso ea alamo ea AL1 / AL2 [AL-1, AL-2] e behiloe joalo ka AM) _ / SBa / LBa.
- Ho ipehela mefuta: 0 ho isa ho 9999 sec (e ikemiselitse ka bo eona nakong ea ha o itokisa ka bo eona)
- E hlaha feela ha ts'ebetso ea alamo [AL-1, AL-2] e behiloe joalo ka LBa.
- Ho ipehela mefuta: 0 ho isa ho 999 ℃ / ℉ (0.0 ho isa ho 999.9 ℃ / ℉) (e ipehela ka bo eona nakong ea ha o itokisa ka bo eona)
- E hlaha feela ha ts'ebetso ea alamo [AL-1, AL-2] e behiloe joalo ka LBa le [LBaT] e sa beoa joalo ka 0.
- Ho beha mefuta: Sheba ho 'Type Input Type le Range'.
- E hlaha feela ka phetisetso ea mofuta oa phetisetso (TX4 -A4).
- Sebaka sa ho beha: 1 ho isa ho 127
- Ho ipehela mefuta: 24, 48, 96, 192, 384 bps atisa 100 ho bala boleng ba boemo.
- Ho ipehela mefuta: 5 ho 99ms
- Ho ipehela mefuta: 0.0 ho 100.0%
- Feela) 0 (OFF) / 10) 0 (ON) e hlaha ha mokhoa oa taolo [C-MD] o behiloe joalo ka ONOF.
- Ha mokhoa oa taolo [C-MD] o ntse o fetoha PID↔ONOF mme boleng ba ho beha bo le ka tlase ho 10) 0, e seta bocha e le) 0.
- E hlaha ka RS485 ea mofuta oa tlhahiso ea likhokahano (TX4 -B4).
- AT ha e hlahe ha mokhoa oa taolo [C-MD] o behiloe joalo ka ONOF.
Ho ipehela mefuta:
|
TLOA |
Notlolla |
| LOC1 | Parameter 2 senotlolo sa sehlopha |
| LOC2 | Parameter 1,2 senotlolo sa sehlopha |
| LOC3 | Paramente ea sehlopha sa 1,2, senotlolo sa SV |
Alamo
Seta tšebetso ea alamo le khetho ea alamo ka ho kopanya. Alamo e ngoe le e ngoe e sebetsa ka bonngoe ka mefuta e 'meli ea tlhahiso ea alamo. Ha mocheso oa hajoale o felile ka alamo, alamo e tla itlhakola ka bo eona. Haeba khetho ea alamo e le latch ea alamo kapa latch ea alamo le tatellano ea standby 1/2, tobetsa konopo ea ho kenya ea dijithale (+ 3 sec, key input digital [DI-K] ea parameter 2 group set as AlRE), kapa TIMA motlakase ebe u Bulela ho hlakola alamo.
|
Mokhoa |
Lebitso |
Ts'ebetso ea alamo |
Tlhaloso |
|
| A) _ | – | – | Ha ho khumo ea alamo | |
| A! | Ho kheloha alamo e phahameng | TLOA H HO SV PV 100-110 ℃ Ho kheloha moeli o phahameng: Beha joalo ka 10 ℃ | TLOA H ON PV SV 90 ℃ 100 ℃ Ho kheloha moeli o phahameng: Behantsha e le -10 ℃ | Haeba ho kheloha pakeng tsa PV le SV e le moeli o phahameng ho feta boleng bo behiloeng ba mocheso o khelohileng, tlhahiso ea alamo e tla ba ON. |
| HO @ | Ho kheloha alamo ea moeli o tlase | ON H Off PV SV 90 ~ 100, Ho kheloha moeli o tlase: Seta 10 a | ON H OFFSV PV100 ℃ 110 de Ho kheloha moeli o tlase: Bea joalo ka -10 ℃ | Haeba kheloho pakeng tsa PV le SV joalo ka moeli o tlase e phahame ho feta boleng bo behiloeng ba mocheso o khelohileng, tlhahiso ea alamo e tla ba ON. |
|
A # |
Ho kheloha phahameng / low- moedi alamo | ON H TLOA H ON
PV SV PV 90 ℃ 100 ℃ 110 ℃ High, Low-moedi kheloha: Behantsha ka 10, ℃ |
Haeba ho kheloha pakeng tsa PV le SV e le moeli o phahameng / o tlase ho feta boleng bo behiloeng ba mocheso o khelohileng, tlhahiso ea alamo e tla BULA. | |
|
$ |
Ho kheloha phahameng / tlaase- meedi pokello alamo | TLOA H ON H Off PV SV PV 90-100, 110, 10, Phahameng, Low-moedi kheloha: Behantsha ka XNUMX, | Haeba ho kheloha pakeng tsa PV le SV e le moeli o phahameng / o tlase ho feta boleng bo behiloeng ba mocheso o khelohileng, tlhahiso ea alamo e TLA TSOA. | |
|
A% |
Boleng bo felletseng ba alamo e phahameng |
TLOA H O PV SV 90-100 ℃ Alamo ea boleng bo felletseng: E behiloe joalo ka 90 ℃ | TLOA H ON
SV PV 100 ℃ 110 ℃ Alamo ea boleng bo felletseng: Bea joalo ka 110 ℃ |
Haeba PV e phahame ho feta boleng bo felletseng, tlhahiso e tla ba ON. |
|
A^ |
Boleng bo felletseng ba alamo ea moeli o tlase |
ON H TLOA
PV SV 90 ℃ 100 ℃ Alamo ea boleng bo felletseng: Bea joalo ka 90 ℃ |
ON H TLOA
SV PV 100 ℃ 110 ℃ Alamo ea boleng bo felletseng: Bea joalo ka 110 ℃ |
Haeba PV e le tlase ho boleng bo felletseng, tlhahiso e tla ba ON. |
| Sba | Sensor khefu alamo | – | E TLA BUA ha e lemoha ho khaoha ha sensor. | |
| LBa | Alamo ea khefutso ea loop | – | E TLA BULELA ha e lemoha khefu ea lupu. | |
- H: Alarm e hlahisang hysteresis [AHYS]
Alamo khetho:
|
Khetho |
Lebitso |
Tlhaloso |
| AM .A | Alamo e tloaelehileng | Haeba e le boemo ba alamo, tlhahiso ea alamo e bulehile. Haeba ho hlakile hore alamo e tsoa, khumo ea alamo e TSOE. |
| AM .B | Latch latch | Haeba e le boemo ba alamo, tlhahiso ea alamo e bulehile mme e boloka boemo ba ON. (Alarm khumo HOLD) |
| AM .C | Kemiso ea ho emisa 1 | Boemo ba alamo ea pele boa tsotelloa mme ho tloha boemong ba bobeli ba alamo, alamo e tloaelehileng ea sebetsa. Ha motlakase o fanoa 'me e le boemo ba alamo, boemo bona ba pele ba alamo bo hlokomolohuoa mme ho tloha boemong ba bobeli ba alamo, alamo e tloaelehileng ea sebetsa. |
| AM .D | Latch latch le standby tatelano 1 | Haeba e le alamo, e sebetsana le latch ea alamo le tatellano ea standby. Ha motlakase o fanoa 'me e le boemo ba alamo, boemo bona ba pele ba alamo bo hlokomolohuoa mme ho tloha boemong ba bobeli ba alamo, latch ea alamo ea sebetsa. |
| AM .E | Kemiso ea ho emisa 2 | Boemo ba alamo ea pele bo hlokomolohuoa mme ho tloha boemong ba bobeli ba alamo, alamo e tloaelehileng ea sebetsa. Ha e sebediswa botjha tatellano ya standby mme haeba e le boemong ba alamo, tlhahiso ya alamo ha e bulele. Kamora ho hlakola boemo ba alamo, alamo e tloaelehileng ea sebetsa. |
| AM .F | Latch latch le standby tatelano 2 | Ts'ebetso ea mantlha e ts'oana le latch ea alamo le tatellano ea standby 1. Ha e sebetse feela ka matla ON / OFF, empa hape e sebetsa ka boleng ba alamo, kapa khetho ea alamo e fetohang. Ha e sebediswa botjha tatellano ya standby mme haeba e le boemong ba alamo, tlhahiso ya alamo ha e bulele. Kamora ho hlakola boemo ba alamo, latch ea alamo ea sebetsa. |
- Boemo ba tatellano ea standby e sebelisitsoeng bocha bakeng sa tatellano ea standby 1, latch ea alamo le tatellano ea standby
- Power ON Boemo ba tatelano ya standby sebelisoa hape bakeng sa tatelano ya standby 2, latch latch le tatelano ya standby
- Matla ON, ho fetola mocheso o behiloeng, mocheso oa alamo [AL1, AL2] kapa tšebetso ea alamo [AL-1, AL-2], e chencha STOP mode ho RUN mode.
Sensor khefu alamo: Mosebetsi o hlahisoang ke alamo o tla BUUA ha sensor e sa hokahanngoa kapa ha ho khaoloa ha sensor ho fumanoa nakong ea taolo ea mocheso. O ka lekola hore na sensor e hokahane le buzzer kapa li-unit tse ling ka ho sebelisa kopano ea alamo. E ka khethoa lipakeng tsa alamo e tloaelehileng [SBaA] kapa latch ea alamo [SBaB].
Mesebetsi
Khalemelo ea ho kenya [IN-B] Molaoli ka boeena ha a na liphoso empa ho kanna ha ba le phoso ka kutlo e kantle ea mocheso oa ho kenya. Mosebetsi ona ke oa ho lokisa phoso ena. Ex) Haeba mocheso oa nnete ke 80 ℃ empa molaoli o bonts'a 78 ℃, beha boleng ba khalemelo ea kenyelletso [IN-B] joalo ka '2' 'me molaoli a bonts'a 80 ℃.
- Ka lebaka la tokiso ea ho kenya, haeba boleng ba mocheso oa hajoale (PV) bo feta mocheso o mong le o mong oa kutlo, e bonts'a HHHH kapa LLLL.
Sesebelisoa sa ho kenya sa dijithale [MAvF]: Haeba mocheso oa hajoale (PV) o ntse o fetoha khafetsa ka phetoho e potlakileng ea lets'oao la ho kenya, e bonts'a MV mme taolo e tsitsitseng e ke ke ea khonahala. Ka hona, ts'ebetso ea sehlahisoa sa dijithale e tsitsisa boleng ba hajoale ba mocheso. Bakeng sa example, beha palo ea ho kenya ea dijithale e le 0.4 sec, 'me e sebelisa sefahleho sa dijithale ho litekanyetso tsa ho kenya nakong ea metsotsoana ea 0.4 mme e bonts'a litekanyetso tsena. Mocheso oa hajoale o kanna oa fapana ka boleng ba ho kenya.
Mokhoa oa tlhahiso ea SSR drive (SSRP function) [SSrM]
- Ts'ebetso ea SSRP e ka khethoa e le ngoe ea taolo e tloaelehileng ea ON / OFF, taolo ea potoloho, taolo ea mohato ka ho sebelisa tlhahiso e tloaelehileng ea drive ea SSR.
- Ts'ebetso ena ea parameter e hlaha feela ka mofuta oa tlhahiso ea SSR drive (TX4 - 4S).
- Ho lemoha ho nepahala ho phahameng le ho laola mocheso ka theko e nang le litšenyehelo ka bobeli bo tsoang hona joale (4-20mA) le tlhahiso e fapaneng (taolo ea potoloho le taolo ea mohato)
- Khetha e 'ngoe ea standard ON / OFF control [STND], control cycle [CYCL], phase phase [PHAS] at SSrM parameter of parameter 2 group. Bakeng sa taolo ea potoloho, hokela SSR ea sefapano sa zero kapa SSR e sa fetoheng. Bakeng sa taolo ea mekhahlelo, hokela SSR e sa fetoheng.
Ha o khetha mokhoa oa taolo ea potoloho kapa mohato, phepelo ea motlakase bakeng sa mojaro le molaoli oa mocheso e tlameha ho tšoana. Potoloho ea taolo [T] e khona ho ipehela feela ha mokhoa oa taolo [C-MD] oa sehlopha sa paramethara 2 o behiloe joalo ka ha PID le SSR drive output method [SSrM] e behiloe joalo ka STND Ha ho na le tlhahiso ea hona joale e khethiloeng kapa mofuta oa SSR drive output ( TX4 - 4C), paramethara ena ha e hlahe. Standard ON / Off taolo ke SSR e fumaneha feela.
- Taolo e tloaelehileng ea ON / OFF [STND] e Laola ON (100% tlhahiso) / OFF (tlhahiso ea 0%) e ts'oanang le tlhahiso e tloaelehileng ea lesokoana.
- Taolo ea potoloho [CYCL] E laola mojaro ka ho pheta sehlahisoa ON / OFF ho latela sekhahla sa tlhahiso nakong ea potoloho e ipapisitseng le nako e itseng (50-cycle). Taolo ea ho nepahala e batla e ts'oana le taolo ea mekhahlelo. Taolo ena e ntlafalitse lerata la ON / OFF ho feta taolo ea phase ka lebaka la mofuta oa zero oa sefapano o fetolang ON / OFF sebakeng sa zero sa AC.
- Taolo ea mokhahlelo [PHAS] E laola mojaro ka ho laola mohato kahare ho potoloho ea halofo ea AC. E tlameha ho sebelisa SSR e sa fetoheng bakeng sa mokhoa ona.
Palo ea hona joale ea tlhahiso [oMA]: Haeba ho na le mofuta o khethiloeng oa hona joale kapa mofuta oa drive oa SSR (TX4S- 4C), ha taolo ea parameter ea 2 OUT e behiloe joalo ka [CURR], o ka khetha mofuta o phahameng / o tlase, 4-20mA [4-20 ] kapa 0-20mA [0-20] ea tlhahiso ea hajoale.
Hysteresis [HYS]: Beha karohano lipakeng tsa ON le OFF ea taolo ea taolo bakeng sa taolo ea ON / OFF.
- Haeba hysteresis e le moqotetsane haholo, ho tsoma (oscillation, chattering) ho ka etsahala ka lebaka la lerata le kantle.
- Maemong a taolo ea ON / OFF, leha PV e ka fihlela boemo bo tsitsitseng, ho ntse ho hlaha ho tsoma. E kanna ea ba ka lebaka la boleng ba ho seta ha hysteresis [HYS], likarolo tsa karabelo ea mojaro kapa sebaka sa senotlolo. Bakeng sa ho fokotsa ho tsoma bonyane, ho hlokahala hore o nahane ka lintlha tse latelang ha o qapa temp. ho laola; Hysteresis [HYS] e nepahetseng, matla a hitara, litšobotsi tsa mocheso, karabelo ea kutlo le sebaka.
Loop break alarm (LBA): E lekola taolo ea lupu ebile e hlahisa alamo ka phetoho ea mocheso ea taba. Bakeng sa taolo ea ho futhumatsa (taolo e futhumatsang), ha taolo e hlahisang MV e le 100% (0% bakeng sa taolo ea ho futhumatsa) mme PV ha e eketsehe ho feta sehlopha sa LBA detection [LBaB] nakong ea nako ea ho lekola LBA [LBaT], kapa ha taolo e tsoa MV ke 0 % (100% bakeng sa ho phola
taolo) 'me PV ha e fokotsehe ka tlase ho sehlopha sa LBA sa ho lemoha [LBaB] nakong ea nako ea ho lekola LBA [LBaT], tlhahiso ea alamo ea fetoha.
Qala taolo ho 1: Ha taolo e hlahisang MV e le 100%, PV e eketseha ho feta sehlopha sa LBA detection band [LBaB] nakong ea nako ea ho lekola LBA [LBaT].
1 ho ea ho 2: Boemo ba ho fetola taolo ea MV (nako ea ho lekola LBA e hlophisitsoe bocha.)
2 ho ea ho 3: Ha taolo e hlahisang MV e le 0% mme PV ha e fokotsehe ka tlase ho sehlopha sa LBA detection [LBaB] nakong ea nako ea ho lekola ea LBA [LBaT], alamo ea loop break (LBA) e ea BULA kamora nako ea ho lekola ea LBA.
3 ho ea ho 4: Control khumo MV ke 0% le sekgoqetsane khefu alamo (LBA) chenchana le boloka ON.
4 ho ea ho 6: Boemo ba ho fetola taolo ea MV (nako ea ho lekola LBA e hlophisitsoe bocha.)
6 ho ea ho 7: Ha taolo e hlahisoang ke MV e le 100% mme PV ha e eketsehe ho feta sehlopha sa LBA detection band [LBaB] nakong ea nako ea ho lekola LBA [LBaT], alamo ea loop break (LBA) ea BULA kamora nako ea ho lekola ea LBA.
7 ho ea ho 8: Ha taolo e hlahisang MV e le 100% mme PV e eketsoa ho feta sehlopha sa LBA detection band [LBaB] nakong ea nako ea ho lekola LBA [LBaT], alamo ea loop break (LBA) ea TIMA kamora nako ea ho lekola ea LBA.
8 ho ea ho 9: Boemo ba ho fetola taolo ea MV (nako ea ho lekola LBA e hlophisitsoe bocha.)
- Ha u etsa li-auto-tuning, sehlopha sa LBA Detection [LBaB] le nako ea ho lekola LBA li ipehela li ipapisitse le boleng ba tokiso ea likoloi. Ha mofuta oa tšebetso ea alamo [AL-1, AL-2] e behiloe joalo ka alamo ea loop break (LBA) [LBa], sehlopha sa LBA detection [LBaB] le parameter ea nako ea ho lekola ea LBA [LBaT] e bonts'itsoe.
Senotlolo sa ho kenya sa dijithale (+ 3 sec) [DI-K]
|
Paramethara |
Tshebetso |
|
| TLOA | TLOA | Ha e sebelise ts'ebetso ea senotlolo sa ho kenya. |
|
TSOGA / EMA |
EMA |
E emisa tlhahiso. Lisebelisoa tse thusang (ntle le alamo ea sekhahla sa senotlolo, alamo ea senotlolo) ntle le taolo ea taolo e sebetsa joalo ka ho seta. Tšoara linotlolo tsa ho kenya dijithale metsotsoana e 3 ho qala bocha.
Senotlolo sa ho kenya Digital (t: over 3 sec)
|
|
Tlosa alamo |
ALRE |
E hlakola tlhahiso ea alamo ka likhoka.
(ha feela khetho ea alamo e le latch ea alamo, kapa latch latch le tatellano ea standby 1/2.) Ts'ebetso ena e sebelisoa ha boleng ba hona joale bo tsoa ts'ebetsong ea alamo empa tlhahiso ea alamo e butsoe. Alamo e sebetsa ka tloaelo hang kamora ho hlakola alamo. |
|
Ho itokisa ka boithaopo |
AT |
E qala / emisa ho itokisa ka bo eona. Mosebetsi ona o ts'oana le ho itukisetsa auto [AT] ea sehlopha sa paramethara 1. (O ka qala ho itokisa ka boithaopo [AT] ea sehlopha sa paramethara 'me oe emise ka senotlolo sa ho kenya sa digital.
AT paramethara ena AT e hlaha feela ha mokhoa oa taolo [C- D] paramethara 2 sehlopha e behiloe joalo ka PID. Ha mokhoa oa taolo [C- D] paramethara 2 sehlopha se behiloe joalo ka O OF, sena paramethara e fetotsoe e le OFF. |
Laola tlhahiso ea MV bakeng sa khefu ea ho kenya [ErMV]: Ha sensor ea ho kenya e robehile, beha taolo ea taolo ea MV. Ha mokhoa oa taolo [C-MD] oa sehlopha sa paramethara 2 o behiloe joalo ka ONOF, beha taolo ea tlhahiso ea MV joalo ka) 0 (OFF) kapa10) 0 (ON). Ha mokhoa oa taolo [C-MD] o behiloe e le PID, o ipehela moeli bakeng sa tlhahiso ea taolo ea MV ke) 0 ho 10) 0.
Sethala sa puisano
Ke ea ho beha le ho beha leihlo ka lisebelisoa tsa kantle (PC, PLC, jj.). E sebetsa bakeng sa mehlala e nang le puisano ea RS485 ka tlhahiso ea khetho (TX4 -B4) Ka kopo sheba ho 'Ordering Information'.
Sehokedi
| Comm. melaoana | Modbus RTU | Comm. lebelo | 4800, 9600 (ea kamehla), 19200, 38400, 115200 bps |
| Mofuta oa khokahano | RS485 | Nako ea ho leta ea likarabo | 5 ho isa ho 99ms (default: 20ms) |
| Tekanyetso ea kopo | EIA RS485 Ho latela | Qala hanyane | 1-bit (e tsitsitseng) |
| Boholo. mabapi | Li-unit tsa 31 (aterese: 01 ho isa ho 127) | Boitsebiso bo fokolang | 8-bit (e tsitsitseng) |
| Mokhoa o lumellanang | Asynchronous | Parity hanyane | Ha ho na (default), Odd, Even |
| Comm. mokhoa | Terata e habeli ea terata e habeli | Emisa hanyane | 1-bit, 2-bit (ya kamehla) |
| Comm. sebaka se sebetsang hantle | Boholo. 800m | ||
Ts'ebeliso ea tsamaiso ea sistimi
- Ho kgothaletswa hore o sebelise converter ea puisano ea Autonics; SCM-WF48 (Wi-Fi ho RS485 · Sesebelisoa sa puisano sa puisano sa waelese sa USB, se rekisoang ka thoko), SCM-US48I (USB to RS485 converter, e rekisoe ka thoko), SCM-38I (RS232C to RS485 converter, e rekisoe ka thoko), SCM-US (USB ho serial converter, rekisoa ka thoko). Ka kopo sebelisa terata e sothehileng, e loketseng puisano ea RS485, bakeng sa SCM-WF48, SCM-US48I le SCM-38I.
Bukana
Bakeng sa tlhaiso-leseling e felletseng le litaelo tsa maemo a puisano le tafole ea 'mapa oa Modbus, ka kopo sheba bukana ea mosebelisi bakeng sa puisano,' me u netefatse hore u latela litemoso tse ngotsoeng litlhalosong tsa tekheniki (katalog, homepage).
Etela leqephe la rona (www.autonics.comho jarolla dibukana.
Phoso
| Pontšo | Tlhaloso | Ho batle phoso |
| BULETSE | Ho phatsima ha sensor ea ho kenya e khaotsoe kapa sensor e sa hokahana. | Hlahloba boemo ba kutlo ea kutlo. |
| HHHH | Mahlaseli ha boleng bo lekantsoeng bo phahame ho feta mefuta ea ho kenya. | Ha kenyelletso e le kahara palo e kalohileng ea ho kenya, pontšo ena ea nyamela. |
| TLHALA | Mahlaseli ha boleng bo lekantsoeng bo le tlase ho palo ea ho kenya. |
Litemoso nakong ea Tšebeliso
- Latela litaelo ho 'Litemoso nakong ea Tšebeliso'. Ho seng joalo, E ka baka likotsi tse sa lebelloang.
- Hlahloba polarity ea li-terminals pele u kenya mohala oa mocheso. Bakeng sa kutlo ea mocheso oa RTD, e ts'oare joaloka terata ea mofuta oa 3, o sebelisa likhoele ka botenya le bolelele bo tšoanang. Bakeng sa kutlo ea mocheso oa thermocouple (CT), sebelisa terata ea tefo e khethiloeng bakeng sa ho holisa terata.
- Boloka hole le molumo o phahamengtage mela kapa lithapo tsa motlakase ho thibela lerata le kenang. Haeba o kenya mohala oa motlakase le mohala oa lets'oao haufi-ufi, sebelisa sefaele orvaristor moleng oa motlakase le terata e sirelelitsoeng moleng oa lets'oao la ho kenya. Se ke oa sebelisa pela sesebelisoa se hlahisang matla a khoheli a matla kapa lerata le phahameng.
- Se ke oa sebelisa matla a fetelletseng ha o hokela kapa o hakolla lihokelo tsa sehlahisoa.
- Kenya sesebelisoa sa motlakase kapa sekhechana sa potoloho sebakeng se fumanehang habonolo bakeng sa ho fana kapa ho hakolla motlakase.
- Se ke oa sebelisa sesebelisoa molemong o mong (mohlala, voltmeter, ammeter), empa taolo ea mocheso
- Ha o fetola senotlolo sa ho kenya, tima motlakase pele o fetoha. Ka mor'a ho fetola senotlolo sa ho kenya, fetola boleng ba parameter e tsamaellanang.
- Se ke oa tlola mola oa puisano le mohala oa motlakase. Sebelisa terata e sothehileng bakeng sa mohala oa puisano 'me u hokele sefaha sa ferrite ntlheng e ngoe le e ngoe ea mohala ho fokotsa litlamorao tsa lerata le kantle.
- Etsa sebaka se hlokehang ho potoloha yuniti bakeng sa mahlaseli a mocheso. Bakeng sa litekanyo tse nepahetseng tsa mocheso, futhumatsa sesebelisoa ho feta metsotso e 20 kamora ho bulela motlakase.
- Etsa bonnete ba hore phepelo ea motlakase voltage fihla ho vol e lekantsoengtage kamora metsotsoana e 2 kamora ho fana ka matla.
- Se ke oa ts'oara terata ho li-terminals tse sa sebelisoang.
- Sehlopha sena se ka sebelisoa maemong a latelang.
- Ka tlung (boemong ba tikoloho e kentsoe 'Specifications')
- Bophahamo, max. 2,000m
- Tekanyo ea tšilafalo 2.
Lihlahisoa tse kholo
- Balaoli ba Mocheso oa Sensor ea Photoelectric
- Fiber Optic Sensors Mocheso / mongobo Transducers
- Batsamaisi ba Monyako SSR / Bolaoli ba Matla
- Monyako oa Lisebelisoa tsa Monyako
- Linako tsa Lisebelisoa tsa Sebaka
- Proximity Sensors Panel Meters
- Lits'oants'o tsa khatello ea Tachometer / Pulse (Rate) Meters
- Li-Encoders tsa Rotary li bonts'a lihlopha
- Sehokedi / Sockets Sensor Bolaoli
- Phepelo ea Power Mode
- Lisebelisoa tsa ho laola / Lamps / Buzzers
- Li-block le li-cable tsa I / O
- Stepper Motors / Bakhanni / Batsamaisi ba Motion
- Litšoantšo tsa Graphic / Logic
- Lisebelisoa tsa Field Network
- Laser tšoaea System (faeba, Co₂, Nd: yag)
- Sesebelisoa sa Laser Welding / Cutting.
Iteanye le rona
Mokhatlo oa Autonics
LIHLOOHO TSE KHOLO:
- 18, Segunda-gil, Seos-myeon, Chungcheongnam-do, South Korea, 513
- TEL: 82-51-519-3232
- E-mail: thekiso@autonics.com
Litokomane / Lisebelisoa
 |
Autonics LCD Display PID Mocheso molaoli eo [pdf] Buka ea Taelo LCD Display PID Mocheso molaoli eo, TX LIHLOOHO |
