lisebelisoa tsa SRC-128 Sample Rate Converter Add On Module

Lipotso Tse Botsoang Hangata

P: Morero oa mojule oa tlatsetso oa SRC-128 ke ofe?

A: Mojule oa SRC-128 o eketsa asynchronous sample sekhahla sa ho fetolela ho multiverter, e lumellang ho kopanngoa ha matšoao a tsoang libakeng tse fapaneng tsa oache.

P: SRC-128 e tšehetsa likanale tse kae?

A: SRC-128 e ts'ehetsa liteishene tse fihlang ho 128, e nolofalletsang litlhophiso tse kang 128 × 0 uni-directional kapa 64 × 64 bidirectional converts.

KAKARETSO

Likaroloana

• Mojule oa tlatsetso oa SRC-128 o eketsa bokhoni ba li-asynchronous sample sekhahla sa phetoho ho multiverter ea hau. E entsoe e le mojule oa tlatsetso ea ka hare, e siea kou ea "Extension" e fumanehang mabokoseng a mang a khefutso.
  (Tlhokomeliso: Mojule o bitsoa “SRC” bukeng ena bakeng sa ho hlaka).
• E na le ts'ebetso e phahameng ka ho fetisisa ea analog (THD+N -134dB typ.), phetolo ea bi-directional bakeng sa kakaretso ea liteishene tse fihlang ho 128 (mohlala, 128×0 uni-directional, kapa 64×64 bi-directional) pakeng tsa li-interfaces leha e le life tse tšehetsoeng ke multiverter.
• Ka SRC e kentsoeng, multiverter e amohela lipontšo tse tsoang libakeng tse peli tse fapaneng tsa oache (A le B). Kenyelletso le/kapa tlhahiso e 'ngoe le e 'ngoe e ka abeloa ho sebetsa ho oache ea A kapa ea B. Ha litsamaiso li thehiloe lipakeng tsa lintho tse kenang le tse hlahisoang lioacheng tse fapaneng, mats'oao a tsamaisitsoe ka bo eona ho SRC ho ts'oana le s.ample sekhahla sa sepheo.
  
• Bokhoni bo teng ba ho tsamaisa li-multiverter bo bolokiloe ka botlalo, SRC e hlaha ka morao 'me e pepeneneng ho mosebelisi.
• Li-presets tse khethehileng li lumella ts'ebeliso ea likou tse peli tsa MADI kapa AES50 hammoho, ho romella le ho amohela liteishene tsohle tse 64 ho 96 kHz (48ch bakeng sa AES50) le ho fetolela ho 48kHz (le ka tsela e fapaneng).

Litaba tsa Lebokose

• 1 SRC-128 Mojule
• 2 Screws M3x6
• 2 Hex standoffs M3x11mm (sebelisa le mofuta oa khale oa MVR-64)
• Bukana ena

Litumellano tse sebelisitsoeng bukeng ena

• Konopo e ka pele ea sesebelisoa e bonts'oa tjena:
• Encoder e ka sutumetsoa. Sena se bontšoa e le
• LED e itseng ka pele ho sesebelisoa e bontšoa ka tsela ena:
• Mongolo o bontšitsoeng ponts'ong ea likarolo tse supileng o bonts'oa joalo ka
• Ts'ebetso ka mokhoa o itseng oa taolo e bontšoa ke daemane:
  • Phanele e ka pele,
  • Web or
  • Mola oa taelo
    

KEKETSO

Ho kenya Hardware

TLHOKOMELISO: Ho thibela ts'abo ea motlakase, tlosa li-plug tsohle tsa motlakase ho multiverter pele o bula!

TLHOKOMELO: Lisebelisoa tsa Static Sensitive Ela Mehato ea Tebelo Bakeng sa ho Tšoaroa!

• Tlosa li-screws tse peli tse ka morao ho sekoaelo se ka holimo sa multiverter (Torx T10):
  
• Flip multiverter ho tlosa sekoahelo se ka holimo. Hakolla sekoahelo fatše sehokelo botlaaseng.
  Tlhokomeliso: Ka lebaka la ho mamellana, sekoahelo ka linako tse ling ha se bulehe habonolo. Tabeng ena, lokolla li-screws tse ka morao (tse 'nè tse ntšo ka mathōkong a marang-rang) ka makhetlo a seng makae. U se ke ua lebala ho fasten bona hape ka mor'a tlhomamiso!
• Fumana lithupa tse peli tsa hex.
  MVR-64 feela: Tlosa li-screws tse peli tse bontšitsoeng botong e kholo ea multiverter, u li nkele sebaka ka lithupa tsa hex tse fanoeng.
  
• Hokela SRC ka hloko botong e kholo.
  Etsa bonnete ba hore SRC e hoketsoe ka nepo (likoti tse ntseng li hola li ikamahanya hantle). Li-SRC tse ling ha li na linotlolo tsa index lihokelong, ho etsa hore ho khonehe ho li kenya ka mola o le mong oa offset ho le letona kapa le letšehali. Tabeng ena, MVR e ke ke ea bulela
  (empa e ke ke ea senyeha).
• Tlamella SRC ka li-screws tse fanoeng tsa M3x6.
• Kopanya hape khokahanyo ea fatše ea sekoahelo ho setsi.
• Thelelisa sekoahelo se ka holimo karolong e ka pele ea phanele, ebe u koala sekoahelo 'me u behe sekoahelo ka li-screw tse peli tse ntšo.

TIISETSO

Mekhoa
SRC-128 e ka hlophisoa ka mekhoa e fapaneng e ka tlase. Re khothaletsa tlhophiso ka web interface hobane e hlakile haholo 'me e u lumella ho etsa litsela tse bohlale tsa mocha, empa tlhophiso ea mantlha e fumaneha hape ka phanele e ka pele. Bakeng sa merero ea boiketsetso, SRC e ka hlophisoa hape moleng oa taelo (telnet kapa serial).

Phanele e ka pele
Khetho ea mohloli oa oache le mokhoa o bohlale oa ho tsamaisa li fumaneha ka phanele e ka pele:

• MVR-mkII: Sebelisa faele ea le likonopo sehlopheng sa "Clock/SRC".
• MVR-64: Kenya menu ea "Clock", tsamaisa cursor ho le sututsa ho kenya tlhophiso ya SRC.

Web taolo
Configuration ka ho web interface ke mokhoa o khothalletsoang. Sena se o nolofalletsa ho tsamaisa likanale tse sa laoleheng ho pholletsa le SRC ho fihlela boholo ba eona.

Mola oa taelo
SRC e ka hlophisoa ka botlalo ka mohala oa taelo. Sheba litlhaloso tsa mola oa taelo oa MVRs, kapa u thaepe "thuso" ka potlako ea taelo.

Mehato ea phetolo
Ntle le SRC, likhokahano tsohle li sebetsa ho "Clock A" e tšoanang e arolelanoang. Ha SRC e kentsoe, sebaka se le seng kapa ho feta se ka hlophisoa hore se sebetse ka nako e 'ngoe ea "Clock B". Neng kapa neng ha ho hlokahala phetolelo pakeng tsa libaka tsa oache A le B, molumo o iketsa sample-rate e fetoloa ka ho e tsamaisa ka mojule oa SRC. Ts'ebetso ena e etsahala pepeneneng ka morao.

Ts'ebetso ea tlhophiso e kenyelletsa mehato e latelang e ka etsoang ka tatellano efe kapa efe:

1. Khetho ea mohloli oa oache bakeng sa oache ea A le ea B
2. Kabelo ea lintho tse kenang le/kapa liphetho ho domain name ea oache A kapa B
3. Ho tsamaisa tsela

Phanele e ka pele
Mokhoa oa ho hlophisa SRC-128 o ipapisitse le mofuta oa multiverter:

MVR-mkII
Khetho ea mohloli oa oache bakeng sa A/B:

• Ho menu ea "Clock/SRC", tobetsa konopo konopo.
• Tsamaisa sesupa mohloling o batloang oa oache tlas'a kholomo ea "A" kapa "B".
• Sututsa encoder kapa tobetsa konopo ea konopo ho khetha mohloli oa oache, kapa tobetsa ho hlakola.
• Ho latela khetho, o tla kopuoa ho fana ka litlhophiso tse ling (Samplerate/SMUX…)

Kabelo ea lintho tse kenang/liphetho ho sebaka sa oache A kapa B:

• Ho menu ea "Clock/SRC", tobetsa konopo konopo.
• Tsamaisa bar e panyang ho se kentsweng seo o se batlang (ho rapama) kapa tlhahiso (e theohileng) ebe o sutumelletsa encoder ho seta "Clock B" bakeng sa khetho. Sena se bontšoa ke bar e tšoeu 'me SRC Status LEDs "A>B"/"B>A" e khantša.
• Pheta mohato o ka holimo ho fihlela likabelo tsohle tsa hau li phethiloe. Ebe o tobetsa ho tsoa ho menu.

Ho tsamaisa tsela
Etsa mokhoa oa ho tsamaisa joalo ka tloaelo. Ha SRC e hlophisitsoe, litsela tsohle tse sebelisang SRC li tla bonahala li le tšoeu ha li sebetsa.
Boemo ba SRC le/kapa Li-LED li bontša bosoeu ha SRC e sebetsa.

MVR-64
Likabelo tsa lintho tse kenang / tse hlahisoang sebakeng sa nako, le khetho ea mohloli oa Clock B:

• Sututsa the konopo ea "Clock" menu.
• Tsamaisa sesupa ho ea hoLED le sutumelletsa ho tiisa. Pontšo ea likarolo tse supileng e bontša ho bonts'a mokhoa oa khetho ea ho kenya. Hona joale o ka khetha mola (kenyo) o lokelang ho sebetsa ka oache B. Ho khetha "X" ho tima SRC bakeng sa ho kenya letsoho. Tlhokomeliso: Mefuta e meng e bontša mela e 'meli ka nako e le' ngoe. Sena se sebelisoa haeba u batla ho kopanya likanale ho tsoa ho tse peli tse kenang bakeng sa 64ch ho 96kHz.Push ho tiisa.
• Pontšo ea likarolo tse supileng e bontša ho bontsha mokgwa wa kgetho ya tlhahiso. Kgetha kholomo (sephetho) e lokelang ho sebetsa ka tshupanako B. Ho khetha "X" ho tima SRC bakeng sa tlhahiso.Sututsa ho tiisa.
• Pontšo ea likarolo tse supileng e bontša ho bonts'a mokhoa oa ho khetha oache ea "ASRC", le LED e bonts'a lamunu. Tsamaisa cursor ho ea mohloling o lakatsehang oache ebe o sutumelletsa ho tiisa.
• Ho latela khetho, o tla kopuoa ho fana ka litlhophiso tse ling (SMUX…)

Ho tsamaisa tsela

Etsa mokhoa oa ho tsamaisa ka mokhoa o tloaelehileng.Ha SRC e lokiselitsoe, litsela tsohle tse sebelisang SRC li tla bonahala li le lamunu ha li sebetsa. Li-LED tsa oache tse 'mala oa lamunu li bontša boemo ba oache ea B.

Ke AES3 feela, ADAT, le MADI tse tšehetsang mefuta e fapanengample litekanyetso tsa ho kenya le ho tsoa. Bakeng sa li-interfaces tsena, o ka khetha libaka tsa oache bakeng sa ho kenya le ho hlahisa ka boikemelo.
Bakeng sa AES50, Dante le FlexLink, likarolo tsa lioache tsa ho kenya le tse hlahisoang li kopantsoe hammoho, ho bolelang hore ho kenya le ho tsoa ho sebelisoa kamehla s e tšoanang.ample sekhahla.

Web

Litlhophiso tsa mehloli ea oache li ka fumanoa tlas'a "CLOCKS" tab. Ha o sebedisa SRC, etsa bonnete ba hore o bulela "SRC tshebetso".

Ha mojule oa SRC o kengoa le ho nolofalloa, boitšoaro ba ona bo ka khethoa karolong ea SRC e tlase. Litlhophiso tse kaholimo li bonts'a tlhophiso e tloaelehileng ea ho fetolela MADI 96k ho Dante 48k.

Ho khetha hore na ke lintho life tse kenang le tse hlahisoang tse sebelisang oache A kapa B, sebelisa li-switches tsa A/B tse matrix view. SRC e kenngoa ka bo eona ha ho etsoa tsela efe kapa efe ho tloha ho oache A ho ea ho B (kapa oache ea B ho ea ho A).

Setšoantšo sa 1: Litsela tse tloaelehileng tsa MADI 96k <> Dante 48k. Hlokomela hore mohloli oa oache oa li-input tsa MADI coaxial le liphetho li behiloe ho oache "B". Matšoao a matšo a bonts'a hore phetoho e sebetsa le SRC e amehang (=li-LED tse tšoeu phanele e ka pele).

Mola oa taelo

Bokhoni ba SRC
Motsoako ofe kapa ofe oa lintho tse kenang le/kapa liphetho li ka abeloa sebaka leha e le sefe sa oache, 'me likanale tse tsamaisoang lipakeng tsa libaka tse fapaneng tsa oache li tsamaisoa ho pholletsa le SRC ho fihlela boholo ba eona bo fihletsoe. Likanale tsa SRC tse fumanehang li tla aroloa lipakeng tsa litsela A> B le B> A ho latela tafole e latelang:

• E ntlafalitse ka boiketsetso bakeng sa A>B le B>A (ka li-block tsa likanale tse 16) ho fihlela kakaretso ea liteishene tse 128 li fihletsoe, ha mahlakore ka bobeli a matha ka x1 (44.1 / 48 kHz)1
• Ho fihla ho 64×64 ha mahlakore ka bobeli a matha ka lebelo la x2 (88.2 / 96 kHz)
• Ho fihla ho 32×32 ha mahlakore ka bobeli a matha ka lebelo la x4 (176.4 / 192 kHz)

Liteishene tse tsamaisoang ka har'a sebaka se tšoanang sa oache (A>A kapa B>B) ha li tsamaisetsoe ho SRC kahoo ha li hloke matla a kanale a SRC.
Liteishene tse tsamaisoang lipakeng tsa libaka tse fapaneng tsa oache (A> B kapa B> A) tse nang le libaka tse ngata li nka mocha o le mong feela ho SRC.

TLHOKOMELO

Boitlhahlobo ba SRC
Ho netefatsa ts'ebetso e nepahetseng ea SRC, etsa boitlhahlobo ba SRC. Nakong ea boitlhahlobo, leqhubu la sine le hlahisoang ka hare le fetisetsoa pele ebe le khutlela morao ka liteishene tsohle tsa 64 × 64 tsa SRC (ho tsamaisa liphetoho tse peli, ho tloha 96kHz => 88.2kHz => 96kHz)

• Ho kenya mokgwa wa ho itlhahloba wa SRC: Tobetsa , fallela ho , fallela ho tobetsa , fetola sekhoudara ho fihlela ponts'o ea likarolo tse supileng e bonts'a 03 ("SRC selftest") ebe o tobetsa .
• Lintlha tse hlahisoang li hlahisoa ho li-headphones moo li ka netefatsoang ka ho li mamela. SRC e sebetsa ka nepo haeba molumo o hloekileng, o sa sothehang oa 1000Hz o ka utluoa likanaleng tsohle. Sebelisa ho mamela kanale e nepahetseng. Bophahamo ba sephetho bo ka fetoloa ho sebelisoa .
• Lintlha tse hlahisoang li boetse li hlahisoa ho MADI optical (likanale 1-32) le MADI coaxial (likanale 33-64) joalo ka melapo e 'meli ea 96kHz / 32ch, e koetsoeng ke oache e ka hare ea multiverter. U ka sebelisa metha efe kapa efe ea matšoao ho hlahloba sephetho; boemo ba tlhahiso bo lokela ho ba -20dB likanaleng tsohle.
• Ho tsoa ho SRC selftest mode, tobetsa konopo konopo

Ho khetha mofuta oa SRC Firmware/Hardware

Ho hlahloba mofuta oa firmware le hardware oa module ea SRC:

Web
Eya ho "ABOUT" Tab. Firmware ea SRC le mofuta oa hardware li hlahisoa ka tlase.

Phanele e ka pele

Tobetsa , fallela ho , tobetsa , fallela ho , tobetsa

Tsamaisa sesupa ho

• ho bontša nomoro ea SRC Firmware Major Version
• ho bontša nomoro ea SRC Firmware Minor Version
• ho bontša SRC Hardware Version pontshong ya dikarolo tse supileng.

Ntlafatso ea Firmware ea SRC
Leha ho hlokahala seoelo, firmware ea SRC ka boeona e ka ntlafatsoa.
Sena se etsoa ka mokhoa o ts'oanang le ntlafatso ea li-multiverter, ka phapang ea hore polaka ea USB e tlameha ho hokeloa ka kotloloho ho SRC (eseng ho multiverter).

KOTSI EA HO TSHOSOA KE MOTLATSI:
E eletsoa ka matla ho matlafatsa Multiverter ho tloha mohloling oa DC (9..24V) nakong ea ntlafatso. Ha o sebelisa li-main tsa AC, hoa khoneha ho ama likarolo tse phelang kahare nakong ea ntlafatso! Ke basebetsi ba nang le litsebo feela ba tlamehang ho etsa sena, ba mamela melao ea polokeho ha ba sebetsa ka mains voltage.

1. Tlosa multiverter.
2. TLOSA MATLA A MAHALA HO QOBA TŠOHO EA MOHLASE!
3. Bula sekoaelo se kaholimo sa multiverter (bona buka ea SRC ea ho etsa sena)
4. Hokela jeke ea USB mojuleng oa SRC ho PC ea hau (ntho leha e le efe ho tloha Windows 7 ho ea pele e lokela ho sebetsa). Ena HASE jack ea USB ea mokokotlo ho mefuta e mengata!
5. Hokela hape matla a mantlha ho multiverter, ebe o e bulela.
6. U SE KE UA AMA LETHO KA HAR'A MULTIVERTER – PHELELA LITHARA TSA 230V KA HARE!
7. Matha "SRC-128-Updater.bat" 'me u tiise ka "U". Ts'ebetso ea ntlafatso e nka motsotso o le mong. Sheba tlhahiso ea skrine bakeng sa melaetsa efe kapa efe ea phoso. Haeba phoso e etsahetse. leka hape kapa sheba "Troubleshooting" karolo e ka tlase.
8. Tlosa multiverter
9. TLOSA MATLA A KHOLO HO QOBA TŠITISO EA MOHLASE!
10. Kenya sekoahelo bocha
11. Sheba hore na ntlafatso e atlehile ka ho netefatsa mofuta oa firmware oa SRC (sheba 4.2, Determining SRC Firmware/Hardware version)

LIEKETSENG TS'OANELO

Paramethara	Boleng
Litekanyo	15x94x27mm (BxHxD)
Boima ba 'mele	60 g
Mocheso oa ho sebetsa	0. +70°C, e sa koaheleng
Mocheso oa polokelo	-40. + 85 ° C, e sa fokotseng
Tšebeliso ea matla	4W max., ho ipapisitse le palo ea kanale e sebelisitsoeng
Palo ea kanale	E feto-fetoha ho tloha 128 × 0 ho 0x128 (ka li-blocks tsa 16) ha mahlakore ka bobeli a matha ka x1 (44.1 / 48 kHz). E hloka bonyane SRC firmware 2.0 le MVR firmware 5.0. Ho fihla ho 64×64 ha mahlakore ka bobeli a matha ka lebelo la x2 (88.2 / 96 kHz) Ho fihla ho 32×32 ha mahlakore ka bobeli a matha ka lebelo la x4 (176.4 / 192 kHz)
Samplitefiso	Ka mabaka sample litekanyetso lipakeng tsa 32kHz le 192kHz
Ts'ebetso ea analog	THD+N: -133 dB mofuta. / -120dB boholo. Mofuta o matla (a boima ba A, 20 Hz ho isa ho 20 kHz): 139 dB
Latency ea molumo	Bakeng sa up-sampLiphetoho tsa ling: t/s = 16/fs_in + 32/fs_in   fs_in / kHz t / ms 44.1 1.09 48 1.03 88.2 0.54 96 0.5 176.2 0.27   Bakeng sa fatše-sampliphetoho tsa ling: t/s = 16/fs_in + (32/fs_in)*(fs_in/fs_out)

HLOMELO

Tiisetso
Re fana ka tiisetso e felletseng ea lilemo tse peli (2) ho tloha ka letsatsi la theko. Nakong ena, re lokisa kapa re fapanyetsana sesebelisoa sa hau mahala haeba ho ka ba le bothata*. Haeba u na le mathata, ka kopo ikopanye le rona pele. Re leka ka matla ho rarolla bothata ba hau kapele kamoo ho ka khonehang, esita le ka mor'a nako ea tiisetso.* Ha e koaheloe ke tiisetso, ho na le tšenyo e bakiloeng ke tšebeliso e sa lokelang, tšenyo ea ka boomo, ho khathala ho tloaelehileng (haholo-holo lihokelo) kapa khokahano e sa lumellaneng. lisebelisoa.

Ikopanye le moetsi

Appsys ProAudioRolf EichenseherBullingerstr. 63 / BK241CH-8004 Zürich Switzerland

www.appsys.ch
info@appsys.ch
Mohala: +41 43 537 28 51
Mobile: +41 76 747 07 42

Recycling
Ho ea ka taelo ea EU 2002/96/EU, lisebelisoa tsa elektroniki tse nang le moqomo o pharalletseng li kanna tsa se ke tsa lahleloa litšila tse tloaelehileng tsa lapeng. Ka kopo, khutlisa lihlahisoa hore li sebelisoe hape molemong oa tikoloho, re tla u buseletsa litefiso tsa thomello.

Nalane ea Phetoho ea Litokomane

Tokollo ea pele

Mabapi le tokomane ena
Matšoao ohle a boletsoeng tokomaneng ena ke thepa ea beng ba eona. Lintlha tsohle tse fanoeng mona li ka fetoha ntle le tsebiso esale pele.
Phetoho ea Litokomane: 1 · 2024-05-20
Copyright © 2017-2024 Appsys ProAudio · E hatisitsoe Switzerland

Litokomane / Lisebelisoa

lisebelisoa tsa SRC-128 Sample Rate Converter Add On Module [pdf] Bukana ea Mosebelisi SRC-128, MVR-64, MVR-mkII, SRC-128 Sample Rate Converter Add On Module, SRC-128, Sample Rate Converter Add On Module, Rate Converter Add On Module, Converter Add On Module, Module

Litšupiso

• Bukana ea Mosebelisi