APG PT-500 Series Mefuta e meng ea Analog Output

ELA HLOKO: Litaba tsa Wiring le Setifikeiti sa CSA ho Bukana ena ea Mosebelisi li tobile ho Analog Output Models ea PT–500. Haeba u na le sensor ea Modbus, ka kopo ikopanye le feme ho 1-888-525-7300, kapa website at www.apgsensors.com/support, bakeng sa buka e nepahetseng bakeng sa kutlo ea hau.

LIEKETSENG

Kea leboha ha u rekile mochini o fetisang ka tlas'a metsi oa Series PT-500 Analog Output ho tsoa ho APG. Re ananela khoebo ea hau! Ka kopo, nka metsotso e seng mekae ho tloaelana le PT–500 ea hau le bukana ena. PT-500 submersible pressure transmitters e fana ka ts'epahalo maemong a thata a indasteri le libakeng tse kotsi. Moetso oa 4–20 mA o netefalitsoe hore o bolokehile ka hare ho libaka tse kotsi tsa US le Canada ke CSA bakeng sa Sehlopha sa I, Karolo ea 2, Lihlopha C le D, Sehlopha sa I, Zone 2, Sehlopha sa IIB, le Sehlopha sa I, Karolo ea 1, Lihlopha C. le D, Sehlopha sa I, Zone 0, maemo a Sehlopha sa IIB. Boholo bo bonyenyane, lisebelisoa tsa elektronike tse kopantsoeng, mefuta e mengata ea mocheso oa mocheso, le ho tšoarella ho etsa hore PT-500 e be sesebelisoa se phethahetseng bakeng sa tekanyo ea khatello e tsitsitseng le e matla.

Ho bala lengolo la hau

Sesebelisoa se seng le se seng sa APG se tla le leibole e kenyelletsang nomoro ea mohlala ea sesebelisoa, karolo ea karolo, nomoro ea serial, le tafole ea pinout ea likhoele. Ka kopo netefatsa hore karolo ea nomoro le tafole ea pinout leiboleng ea hau li lumellana le odara ea hau. Lintlha tse latelang tsa motlakase le litumello li boetse li thathamisitsoe leiboleng. Ka kopo sheba Setifikeiti sa Tumellano ho rona websaete bakeng sa lintlha tse ling.

Litekanyetso tsa motlakase

• Kenyelletso: 10 ho 28 Volts DC; Sephetho: 4-20 mA
• Sehlopha sa Exia sa I, Karolo ea 2; Lihlopha C, D T4
• Sehlopha sa I, Zone 2, Sehlopha sa IIB
• AEx nC IIB T4: Ta: -40°C ho isa ho 85°C
• Ex nL IIB T4: Ta: -40°C ho isa ho 85°C
• Khatello e phahameng ea ho sebetsa: 10,000 PSI
• Vmax Ui = 28VDC, Imax Ii = 110mA, Pmax Pi = 0.77W, Ci = 0μF, Li = 0μH
• Kenya ho latela setšoantšo sa 9002803, leqephe la 2 (leqephe la 10).
• Kenyelletso: 9 ho 28 Volts DC; Tlhahiso: 4–20mA
• Sehlopha sa Exia sa I, Karolo ea 1; Lihlopha C, D T4
• Sehlopha sa I, Zone 0, Sehlopha sa IIB
• AEx ia IIB T4: Ta: -40°C ho isa ho 85°C
• Ex ia IIB T4: Ta: -40°C ho isa ho 85°C
• Khatello e phahameng ea ho sebetsa: 10,000 PSI
• Vmax Ui = 28VDC, Imax Ii = 110mA, Pmax Pi = 0.77W, Ci = 0.042μF, Li = 0.320μH
• Kenya ho latela setšoantšo sa 9002803, leqephe la 1.

BOHLOKOA: 4–20 mA PT–500 ea hau e LOKELA ho kengoa ho latela setšoantšo sa 9002803 (Sets'oants'o sa Wiring sa Intrinsically Safe kapa Non-Incendive Wiring Diagram) joalo ka ha ho boletsoe ka holimo ho fihlela litumello tse thathamisitsoeng. Ho kenya ka phoso ho tla etsa hore litumello tsohle tsa polokeho le lintlha li se ke tsa sebetsa.

TIISETSO LE LITHIBELO TSA TIISETSO

Sehlahisoa sena se koaheloa ke waranti ea APG ea ho se be le bofokoli linthong tse bonahalang le moetsong tlas'a tšebeliso e tloaelehileng le tšebeletso ea sehlahisoa bakeng sa likhoeli tse 24. Bakeng sa tlhaloso e felletseng ea Warranty ea rona, ka kopo etela www.apgsensors.com/resources/warranty-certifications/warranty-returns/. Ikopanye le Tšehetso ea Theknoloji ho fumana tumello ea ho khutlisa thepa pele u romela sehlahisoa sa hau hape.

LITLHAHISO LE LIKHETHO

Litekanyo

Litlhaloso

Tshebetso

• Khatello Ranges ho tloha 0 ho 250 PSI
• Lihlahisoa tsa Analog 4–20mA, 0/1–5VDC, 1–10VDC, mV/V
• Over Pressure 2X FSO
• Phatlalatso ea Khatello ea 3.0X FSO
• 1 Selemo Botsitso 0.75% FSO

Ho nepahala

• Linearity, Hysteresis & Repeatability ±0.25% ea Full Scale (BFSL) ho fihla ho ± 0.1% ea Full Scale ±1.0% bakeng sa ≤ 1 psi
• Thermal Zero Shift @ 70 °F ±0.045% FSO/°C (±0.025% FSO/°F)
• Thermal Span Shift @ 70 °F ±0.045% FSO/°C (±0.025% FSO/°F)

Tikoloho

• Mocheso oa ho sebetsa -40° ho ea ho 85°C / -40° ho ea ho 185°F
• Compensed Mocheso
  • ≤ 10 psi: 0º ho 60ºC / 32º ho 140ºF
  • > 10 psi: -10º ho 70ºC / 14º ho 158ºF
• Botebo bo boholo bo ka tlase ho metsi 575 ft / 175.25 m / 250 psi

Motlakase

Lisebelisoa tsa Kaho

• Lisebelisoa tse Wetted 316L Stainless Steel
• Anti-snag Cage 316L Stainless Steel
• Cable Urethane, PVC, kapa Hytrel
• Tšireletso Nose Cone Delrin
• Seal Viton ETP–s

Mechini

• Khokelo ea Khatello Sheba setlhophiso sa nomoro ea mohlala bakeng sa lenane le felletseng
• Matla a Cable Tensile Ho fihlela ho liponto tse 200

Patents

• US Patent No. 7,787,330

Moetsi oa Nomoro ea Mohlala

Nomoro ea Mohlala: PT–500_____

A. Mofuta oa Cable

• ▲ Urethane - Blue
• B Hytrel .31” Ø – E Ntsho
• C PVC - E ntšo
• D Hytrel .25” Ø – E Ntsho

B. Khatello Range

• Hlalosa mefuta e fapaneng ea tekanyo e batloang
  __________ Botebo ba Metsi bo Phahameng
  575 ft. (175.25 m), 250 psi

C. Mekhahlelo e Tloaelehileng ea Tekanyo

• PSI □ FTH2O
• INH2O □ MMH2O

D. Mofuta oa Khatello (Venting) Range

• G Gauge (tube e bulehileng ea moea) - 0 - 250 psi
• A Absolute (tube e tiisitsoeng ea vent) - 10 - 200 psi
• S E tiisitsoe (tube e tiisitsoeng ea vent) - 4 - 20 psi

E. Sephetho

• L1▲ 4–20 mA, 2-terata
• L3 0–5V, 4–terata*
• L9 10 mV/V, 4–terata*
• L12 1–5V, 4–terata*
• L21 1–10V, 4–terata*
• L5 Modbus RTU, 4–wire RS–485*† Ho bala ka khatello feela
• L31 Modbus RTU, 4-wire RS-485 *† Lipalo tsa maemo, bophahamo ba tanka
  Tlhokomeliso: *E bontša hore khetho ena ha e so fumane Litumello tsa CSA.
  Tlhokomeliso: †E bontša hore tšobotsi ea Zero e ka fetoloang ha e ea kenyelletsoa.

F. NPTM

• E0▲ 1/2” NPTM e loketseng kotopo, e nang le pigtail
• E5 Pigtail ntle le khokahanyo ea kotopo

G. Ts'ebetso ea Khokahano

• P1▲ 1/2” NPTM e nang le nko ea nko ea polasetiki e tlosoang
• P5 1/4” NPTF
• P37 Welded Cage (anti-snag 1 piece e loketseng)
• P38 1-1/2” tri–clover e nang le diaphragm ea 3/4”
• P39 Reusable Cage (e kenyelletsa ho kenya P38)

H. Nepahetse
E kholo ho feta 1 PSI

• N0▲ ±0.25%
• N1 ±0.25% e nang le setifikeiti sa NIST
• N2 ±0.1% e nang le setifikeiti sa NIST

1 PSI le Ka tlase

• N3 ±1%
• N4 ±1% e nang le setifikeiti sa NIST

I. Bolelele ba thapo

• (hlalosa bolelele ba thapo e hlokahalang maotong)
  Tlhokomeliso: ▲ E bontša hore khetho ena e tloaelehile.

Tafole ea Pinout ea Motlakase le Tafole ea Matla a Phepelo

PT–500 Analog Output Models Pin Out Table

Tlhokomeliso: Mohala oa transducer KAPA terata ea drain e ts'oanetse ho hokela mobung o sa sebetseng hantle.

Tafole ea Phepelo ea Matla a PT–500 Analog Output

MV/V tlhahiso e lekantsoe ho 10 VDC input

HO KENYA LE HO TLOSA MESEBETSI LE LINTLHA TSEO

Lisebelisoa Tse Hlokahalang

• Wrench e boholo bo loketseng bakeng sa ts'ebetso ea hau ea PT–500 kapa khokahanyo ea kotopo.
• Theipi ea khoele kapa motsoako oa sealant bakeng sa maqhama a khoele

Lintlha tsa Kemiso ea 'Mele

PT–500 e lokela ho kenngoa sebakeng—ka tlung kapa ka ntle—se finyellang maemo a latelang:

• Thempereichara e tikolohong e lipakeng tsa -40°C le 85°C (-40°F ho ea +185°F)
• Mongobo o amanang ho fihla ho 100%
• Altitude ho fihla ho limithara tse 2000 (maoto a 6560)
• IEC-664-1 Conductive Pollution Degree 1 kapa 2
• Sehlopha sa II sa Tekanyo sa IEC 61010-1
• Ha ho lik'hemik'hale tse senyang ho tšepe e sa hloekang (joalo ka NH3, SO2, Cl2 joalo-joalo)
• Ample sebaka sa ho hlokomela le ho hlahloba
• Phepelo ea motlakase ea Sehlopha sa II

Mounting Litaelo

• Hokela lithapo tsa PT–500 ea hau tsamaisong ea hau ea taolo ho latela tafole ea pinout leqepheng la 4. Ho kenya Motlakase PT–500 ea hau e ka kenngoa ka litsela tse tharo: ka khokahanyo ea NPT, ho fanyeha mahala, kapa kotopo e kentsoeng. Ho kenya transducer ea khatello ho bonolo haeba u latela mehato e seng mekae e bonolo:
• Le ka mohla u se ke ua fetelletsa - tiisa kutlo. Sena se ka hatella diaphragm, sa fetola tsela eo se itšoarang ka eona khatellong. Maemong 'ohle, tiisa sensor ka hohle kamoo ho ka khonehang ho etsa tiiso e lekaneng. Likhoeleng tse otlolohileng, tiisa feela ho fihlela o utloa o-ring compression - etsa bonnete ba hore ha o senye kapa oa ntša o-ring.
• Kamehla sebelisa teipi ea khoele kapa motsoako oa sealant holim'a likhoele tse tapered. Koahela teipi ea khoele ka lehlakoreng le leng la likhoele hore e se ke ea toloha ha u ntse u phunya sensor sebakeng. Ho manolla ho ka baka kabo e sa lekanang le ho hloleha ha tiiso. Bakeng sa likhoele tse otlolohileng sebelisa o-ring.
• Kamehla qala ho fafatsa sensor ea hau ka letsoho ho qoba ho tšela likhoele. Ho hloleha ha likhoele e ka ba bothata haeba u senya likhoele ka ho li tiisa ho feta tekano kapa ka ho tšela likhoele.
• Bakeng sa ho fanyeha PT–500, phunya lesoba la 3/16” 1/2” NPTF ho isa ho 1/2” NPTF hex coupler ’me u e sireletse ho 1/2” NPTM coupler fitting ea PT–500. Hokela thapo ea .060” bophara ba 316L SS ea bolelele bo lakatsehang ho hex coupler 'me u sireletse thapo ea tšepe ho latela litlhoko tsa kopo ea hau.

TLHOKOMELISO: Haeba PT-500 ea hau e na le phaephe ea moea, u se ke ua koala, ua koahela kapa ua koala tube ea moea ka ntho leha e le efe ntle le sekoahelo se fanoang ke APG kapa cartridge ea desiccant drying (Sheba setšoantšo sa 3.3 le 3.4). Litiiso tse sa lumelloang kapa likoahelo li tla thibela ts'ebetso e nepahetseng ea sensor.

Kemiso ea Motlakase

• Hokela lithapo tsa PT–500 ho sistimi ea hau ea taolo ho latela tafole ea pinout

BOHLOKOA: E le hore ts'ireletso ea nakoana kapa e sebetsang e sebetse, e ka ba terata ea PT-500 OR shield drain terata, empa eseng ka bobeli, e tlameha ho hokela mobung o sa sebetseng hantle.

Litaelo tsa ho Tlosa

Ho tlosa PT–500 ea hau tšebeletsong ho tlameha ho etsoa ka hloko. Ho bonolo ho theha boemo bo sa bolokehang, kapa ho senya sensor ea hau, haeba u sa hlokomele ho latela litataiso tsena:

• Bakeng sa li-sensor tse kentsoeng ka khokahano ea ts'ebetso ea NPT, etsa bonnete ba hore khatello e tlositsoe ka botlalo moleng kapa sekepeng. Latela mekhoa eohle ea ho arola ka mokhoa o sireletsehileng mecha ea litaba e ka har'a mohala kapa sekepe.
• Tlosa sensor ka wrench e boholo bo lekaneng (ho latela khokahano ea hau ea ts'ebetso).
• Bakeng sa li-sensor tse emisitsoeng, fumana sensor ho tloha sekepeng. Latela mekhoa eohle ea ho arola ka mokhoa o sireletsehileng mecha ea litaba e ka har'a mohala kapa sekepe.
• Hloekisa ka hloko ho lekana ha sensor le diaphragm ho lithōle life kapa life (sheba Tlhokomelo e Akaretsang) 'me u hlahlobe tšenyo.
• Boloka sensor ea hau sebakeng se omileng, mocheso o pakeng tsa -40 ° F le 180 ° F.

KOTSI: Ho tlosa PT-500 Pressure Transmitter e hokahaneng le ts'ebetso ha ho ntse ho e-na le khatello moleng ho ka baka kotsi kapa lefu.

TLHOKOMELO

Tlhokomelo e Akaretsang

PT-500 series pressure transmitter e tlase haholo 'me e tla hloka tlhokomelo e fokolang ha feela e kentsoe ka nepo. Leha ho le joalo, ka kakaretso, u lokela ho:

• Bakeng sa lisensara tse hokahaneng le tšebetso, boloka transmitter le sebaka se se potileng ka kakaretso li hloekile.
• Qoba lits'ebetso tseo transmitter e sa etsetsoang tsona, joalo ka mocheso o feteletseng, ho kopana le lik'hemik'hale tse senyang, kapa libaka tse ling tse senyang.
• Hlahloba likhoele neng kapa neng ha u tlosa transmitter mosebetsing kapa u fetola sebaka sa eona.
• Qoba ho tšoara diaphragm. Ho kopana le diaphragm, haholo-holo ka sesebelisoa, ho ka fetola sephetho ka ho sa feleng le ho senya ho nepahala.
• Hloekisa diaphragm kapa diaphragm feela ka tlhokomelo e feteletseng. Haeba ho hlokahala ho sebelisa sesebelisoa, etsa bonnete ba hore ha se ame diaphragm.

BOHLOKOA: Khokahano efe kapa efe le diaphragm e ka senya sensor ka ho sa feleng. E-ba hlokolosi ka ho feteletseng.

Zero Fetola (4–20 mA, 0–5 VDC, le 0–10 VDC feela)

Sehlahisoa sa zero (4mA, kapa 0 VDC) se ka fetoloa ka ho tšoara magnet perpendicular to the can, hoo e ka bang 1-1/2” ho tloha holimo kapa tlase ho lekotikoti. Ho tšoara makenete haufi le holimo ho ka eketsa tlhahiso (Sheba setšoantšo sa 3.1). Ho tšoara makenete haufi le tlase ho ka fokotsa tlhahiso (Sheba setšoantšo sa 3.2). Haeba litekanyetso tsa zero li sa fetohe hang-hang, tšoara makenete sebakeng se haufi le bokaholimo ba lekotikoti ho fihlela boleng bo fetoha, ho fihlela metsotso e 'meli. Haeba ho se na phetoho, pheta mokhoa ona haufi le tlase ea lekotikoti. Haeba ho ntse ho se na phetoho, sheba feme. Li-transmitter tse sa hlahisoang tsa PT-500 ha li ikamahanye le liphetoho tsa khatello ea barometric. Re khothaletsa hore li-transmitters tsa PT–500 li be le zero ha li fumana, le ka mor'a liketsahalo tse kholo tsa boemo ba leholimo.

HLOKOMELA: Tekanyo ea span e tlameha ho etsoa fekthering bakeng sa mefuta eohle ea analoge

Ho omisa Tube ea Vent

Ho koaheloa ka har'a tube ea vent ho ka senya lisebelisoa tsa elektroniki ka har'a sensor ea hau, 'me ho baka ho bala ho sa tšepahaleng. APG e fana ka mekhoa e 'meli ea ho thibela vent condensation ea vent: cap, le cartridge e omisang ea desiccant. Sekoahelo sa moea ke tube ea PVC e nang le patch ea hydrophobic e lumellang mongobo hore o tsoe ka har'a tube ntle le ho lumella metsi ho kena (Sheba setšoantšo sa 3.3). Sekoahelo se tiisitsoe ke o-ring, 'me se kenngoa habonolo tšimong. The desiccant drying cartridge e nang le vent tube adapter e nka mongobo leha e le ofe ka har'a tube ea vent ho thibela mouoane hore o se ke oa fokotseha (Sheba Setšoantšo sa 3.4). Ho kenya cartridge ea desiccant drying ho potlakile ebile ho bonolo. Mekhoa e tloaelehileng ea ho kenya ke cable tie, Velcro, le cable clamps.

TLHOKOMELISO: Likristale tsa Desiccant li fetoha ho tloha ho boputsoa ho ea ho pinki ha li ntse li tlala. Cartridge e tlameha ho nkeloa sebaka ha likristale tsohle li tletse. Setšoantšo sa 3.3

BOHLOKOA: U se ke ua sebelisa cartridge ea desiccant ka pel'a mouoane kapa lino tse nang le phosphate esters, lubricant ea maiketsetso, metsoako ea hydrocarbon, methanol, acetone, lacquer solvents, kapa lintho tse ling tse phelang.

Ho lokisa le ho Khutlisa

Haeba PT–500 series transmitter e hloka ts'ebeletso, ka kopo ikopanye le feme ka mohala, lengolo-tsoibila kapa moqoqo oa inthaneteng. Re tla u fa nomoro ea Return Material Authorization (RMA) e nang le litaelo.

• Mohala: 888-525-7300
• Lengolo-tsoibila: sales@apgsensors.com
• Chat Inthaneteng ho www.apgsensors.com

Ka kopo, fumana nomoro ea karolo ea PT–500 le nomoro ea seriale. Sheba Lithibelo tsa Warranty le Warranty bakeng sa lintlha tse ling

HO KENYA SEBAKA LE KOTSI LE SETIFICATION

Setšoantšo sa Intrinsically Safe Wiring

Sets'oants'o sa Lithapo Tse sa Eketseheng

Ikopanye

• Automation Products Group, Inc.
• Mohala: 1 888-525-7300 kapa 1 435-753-7300
• lengolo-tsoibila: sales@apgsensors.com
• www.apgsensors.com
• Automation Products Group, Inc.
• 1025 W. 1700 N.
• Logan, UT 84321

Litokomane / Lisebelisoa

APG PT-500 Series Mefuta e meng ea Analog Output [pdf] Bukana ea Mosebelisi PT-500 Series Analog Output Models, PT-500 Series, Analog Output Models, Output Models, Models

Litšupiso

• Bukana ea Mosebelisi