Altronix ACM8E Series ACM8CBE Masu Sarrafa Wuta

Ƙarsheview

Altronix ACM8E da ACM8CBE suna juyar da ɗaya (1) 12 zuwa 24 volt AC ko shigarwar DC zuwa takwas (8) mai sarrafa kansa mai haɗaɗɗiya ko abubuwan kariya na PTC. Ana iya juyar da waɗannan fitinun wutar lantarki zuwa busassun lambobi "C" (ACM8E kawai). Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa ko kuma buɗe (NO) busassun shigar da shigar da busassun bayanai daga Tsarin Gudanarwa, Card Reader, faifan maɓalli, Maɓallin turawa, PIR, da sauransu. Ƙungiyoyin za su tura wutar lantarki zuwa na'urorin sarrafa dama iri-iri ciki har da Mag. Makullai, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Fitarwa za su yi aiki a cikin yanayin rashin aminci da/ko gaza-aminci. An tsara raka'a don samun ƙarfi ta hanyar tushen wutar lantarki guda ɗaya wanda zai ba da wutar lantarki ga duka ayyukan hukumar da na'urorin kulle, ko biyu (2) hanyoyin wutar lantarki masu zaman kansu gaba ɗaya, ɗaya (1) samar da wutar lantarki don aikin hukumar da ɗayan don kulle / kayan haɗi. iko. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da su don haifar da wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na takwas (8).

Ƙayyadaddun bayanai

12 zuwa 24volt AC ko aiki na DC (saitin ba a buƙata) (0.6A @ 12 volt, 0.3A @ 24 volt amfani na yanzu tare da duk ƙarfin relays).

Zaɓuɓɓukan shigar da wutar lantarki:

• • a) Daya (1) shigar da wutar lantarki gama gari (ikon allo da kullewa).
  • b) Biyu (2) keɓaɓɓen abubuwan shigar da wuta (ɗaya (1) don wutar lantarki da ɗaya (1) don ikon kulle / hardware).
• • Takwas (8) Abubuwan shiga Tsarin Sarrafa abubuwa masu jan hankali:
  • a) Takwas (8) na yau da kullun buɗewa (NO).
  • b) Takwas (8) buɗaɗɗen shigar ruwa mai tarawa.
  • c) Duk wani hade na sama.
• Takwas (8) abubuwan sarrafawa masu zaman kansu:
  • a) Takwas (8) Rashin-Lafiya da/ko Rashin Amintaccen Fitilar wutar lantarki.
  • b) Takwas (8) busassun sigar “C” 5A rated relay results (ACM8E kawai).
  • c) Duk wani haɗuwa na sama (ACM8E kawai).
  • Takwas (8) abubuwan wuta na taimako (ba a kunna ba).

Ƙididdigar fitarwa:

• • ACM8E: Fuses an kimanta 3.5A kowanne.
  • ACM8CBE: Ana kimanta PTCs 2.5A kowanne.
  • An ƙididdige babban fuse a 10A.

Lura: Jimlar fitarwa na halin yanzu ana ƙaddara ta hanyar samar da wutar lantarki, kada ya wuce iyakar jimlar 10A.

• • Jajayen LED suna nuna abubuwan da aka kunna (masu kuzarin relays).
  • Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8). Zaɓuɓɓukan shigar da ƙararrawar wuta:
  • a) Buɗe (NO) ko kuma rufe (NC) busasshen shigar da lamba.
  • b) shigarwar juyar da polarity daga da'irar siginar FACP.
• FACP fitarwa fitarwa (form "C" lamba lamba @ 1A 28VDC, ba UL kimanta).
• Koren LED yana nuna lokacin da aka jawo cire haɗin FACP.
• Tubalan tasha masu cirewa suna sauƙaƙe sauƙin shigarwa.

Ƙimar Ƙirar (H x W x D): 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).

ACM8E da ACM8CBE Jadawalin Tsare-tsaren Tunanin Kanfigareshan

• Lokacin da aka yi amfani da shi tare da Ƙarfin Ƙarfin Ƙarfi na Class 2.
• Matakan Ayyukan Gudanar da Dama: Hare-Hare-Hare-I; Jimiri - IV; Tsaron layi - I; Tsayawar Wuta - I.

Umarnin Shigarwa:

1. Dutsen naúrar a wurin da ake so.

A hankali sakeview

• Teburin Gano Tasha (shafi na 4) Tsarin Aikace-aikacen Na Musamman (shafi na 5)
• Ƙididdigar LED (shafi 4) Hoto-up (shafi 6)

Shigar da wutar lantarki

Ana iya amfani da na'urorin da wutar lantarki guda ɗaya (1) wanda zai samar da wutar lantarki ga duka ayyukan hukumar da na'urorin kulle ko biyu (2) kayan wuta daban-daban, ɗaya (1) don samar da wutar lantarki don aikin hukumar da ɗayan don samar da wutar lantarki. don na'urorin kullewa da/ko kayan sarrafa damar shiga.

Lura: Ƙarfin shigarwa na iya zama ko dai 12 zuwa 24 volts AC ko DC (0.6A @ 12 volt, 0.3A @ 24 volt amfani na yanzu tare da duk ƙarfin relays).

Shigar da wutar lantarki guda ɗaya
Idan naúrar da na'urorin kulle za a yi amfani da su ta amfani da wutar lantarki guda ɗaya, haɗa abin fitarwa

• (12 zuwa 24 volts AC ko DC) zuwa tashoshi masu alamar [- Power +].

Abubuwan shigar da wutar lantarki biyu (Hoto 1c, shafi 5)
Lokacin da ake son amfani da kayan wuta guda biyu, masu tsalle J1 da J2 (wanda ke gefen hagu na tashoshin sarrafa wutar lantarki) dole ne a yanke. Haɗa wuta don naúrar zuwa tashoshi masu alama [- Control +] kuma haɗa wuta don na'urorin kulle zuwa tashoshi masu alama [- Power +].

Lura: Lokacin amfani da wutar lantarki DC dole ne a kiyaye polarity. Lokacin amfani da wutar lantarki AC yana buƙatar kada a kiyaye polarity (Fig. 1d, shafi 5). Don yarda da UL dole ne kayan wutar lantarki su kasance UL An jera su don Tsarin Gudanar da Samun dama da na'urorin haɗi.

Zaɓuɓɓukan fitarwa (Hoto 1, shafi 5):
ACM8E na samar da ko dai guda takwas (8) da aka canza wutar lantarki, takwas (8) busassun nau'i na "C", ko duk wani haɗin da aka canza da kuma samar da "C", da takwas (8) da ba a kunna wutar lantarki ba. ACM8CBE na samar da wutar lantarki takwas (8) da aka canza ko kuma takwas (8) da ba a kunna wutar lantarki ba.

Abubuwan da aka Canja Wuta
Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM]. Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunnawa zuwa madaidaicin alamar [NC]. Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wutar lantarki zuwa tasha mai alama [NO].

Samfuran abubuwan fitar da “C” (ACM8E kawai)
Lokacin da ake son fitar da nau'i na "C" dole ne a cire fuse mai dacewa (1-8). Haɗa korau (-) na wutar lantarki kai tsaye zuwa na'urar kullewa. Haɗa tabbataccen (+) na wutar lantarki zuwa tasha mai alama [C]. Don Rashin-Safe aiki haɗa tabbataccen (+) na na'urar da ake kunna wuta zuwa tasha mai alamar NC]. Don Ƙarfafa Amintaccen aiki haɗa tabbataccen (+) na na'urar da ake kunna wuta zuwa tasha mai alama [NO].

Fitowar wutar lantarki (ba a kunna ba)
Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [C] da kuma mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli da sauransu.

Zaɓuɓɓukan shigar da ƙara (Hoto 1, shafi 5):

• (a) Kullum Buɗe [NO] shigar da fararwa:

Ana kunna abubuwan shigarwa 1-8 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa. Haɗa na'urori (masu karanta katin, faifan maɓalli, buƙatun fita maɓallan da sauransu) zuwa tashoshi masu alama [IN] da [GND].

Buɗe shigarwar Mai Tarin Ruwa
Haɗa kwamitin kula da hanyar shiga buɗaɗɗen nutse mai tarawa tabbatacce (+) zuwa tashar da aka yiwa alama [IN] da korau (-) zuwa tasha mai alama [GND].

Zaɓuɓɓukan Interface Ƙararrawar Wuta (Figs. 3 zuwa 7, shafi 6)
Rufe [NC], yawanci buɗe [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. Don kunna cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW8] KASHE. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW8] ON.

• Kullum Buɗe shigarwar [NO]
  • Don ƙugiya mara latch duba hoto 4, shafi. 6. Don latch ƙugiya duba hoto 5, shafi. 6.
• (b) Akan rufe [NC] shigarwa:
  • Don ƙugiya mara latch duba hoto 6, shafi. 6. Don latch ƙugiya duba hoto 7, shafi. 6.
• (c) FACP Siginar shigar da madauri mai faɗakarwa:
  • Haɗa tabbataccen (+) da korau (-) daga fitowar siginar FACP zuwa tashoshi masu alamar [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alama [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa). Jumper J3 dole ne a yanke (Fig. 3, shafi na 6).

FACP Dry form “C” fitarwa (Hoto 1a, shafi 5)
Haɗa na'urar da ake so don haifar da busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alamar [NO] da [C] FACP don buɗe fitarwa ta al'ada ko tashoshi masu alamar [NC] da [C] FACP don fitowar da aka rufe.

LED Diagnostics

LED	ON	KASHE
LED 1-LED 8 (ja)	Relay(s) na fitar da kuzari.	Relay(s) na fitar da kuzari.
Trg (Green)	An kunna shigar da FACP (yanayin ƙararrawa).	FACP na al'ada (yanayin rashin ƙararrawa).

Teburan Gano Tasha

Labarin Ƙarshe	Aiki/Bayyana
- Power +	12VDC ko 24VDC shigarwa daga hukumar samar da wutar lantarki.
– Sarrafa +	Ana iya haɗa waɗannan tashoshi zuwa wani keɓantaccen wutar lantarki na UL List don samar da keɓantaccen ikon aiki don ACM8E/ACM8CBE (dole ne a cire masu tsalle J1 da J2).
FADAKARWA INPUT 1 - INPUT 8 IN, GND	Daga budewa da/ko buɗaɗɗen abubuwan shigar da mai tarawa (buƙatun fita maɓallan, fita pir's, da sauransu).
FITOWA TA 1 - FITOWA TA 8 NC, C, NO, COM	12 zuwa 24 volts AC/DC yana jawo abubuwan sarrafawa masu sarrafawa: Rashin-Safe [NC tabbatacce (+) & COM Negative (-)], Rashin-Secure [NO tabbatacce (+) & COM Korau (-)], Fitowar taimako [C tabbatacce (+) & COM Korau (-)] (Lokacin da ake amfani da wutar lantarki na AC ba a buƙatar kiyaye polarity), NC, C, NO zama nau'i "C" 5A/24VAC/VDC da aka ƙididdige abubuwan busassun lokacin da aka cire fis (ACM8E). Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba.
FACP INTERFACE T, + INPUT -	Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci rufe daga da'irar fitarwa ta FACP (Hoto na 3 zuwa 7, shafi na 6-7).
FACP INTERFACE NC, C, NO	Form "C" tuntuɓi mai lamba @ 1A 28VDC don rahoton ƙararrawa. (UL ba ya kimanta wannan fitarwa).

Tsarin aikace-aikace na yau da kullun

GARGADI: Don rage haɗarin gobara ko girgizar lantarki, kar a bijirar da naúrar ga ruwan sama ko danshi. Sauya fis (ACM8E kawai) tare da nau'in iri ɗaya da ƙima, 3.5A/250V.

Hoto-Up

Hoto 2 Haɗawa na zaɓi ta amfani da abubuwan shigar wutar lantarki guda biyu (2).

 

Hoto 3 shigarwar juyar da polarity daga fitarwa na sigina na FACP (an yi la'akari da polarity a yanayin ƙararrawa)

 

Hoto 4 Buɗewa Kullum: Ba-Latching FACP shigar da fararwa

 

Hoto 5 Kullum Buɗe shigarwar faɗakarwa ta FACP tare da sake saiti (UL ba ta kimanta wannan fitarwa ba)

 

Hoto 6 Akan Rufe: Ba-Latching FACP shigar da fararwa

 

Hoto 7 Akan Rufe: Latching shigarwar FACP mai kunnawa tare da sake saiti (UL bai kimanta wannan fitarwa ba)

Girman Rukunin
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix bashi da alhakin kowane kurakurai na rubutu.140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
IIACM8E/ACM8CBE

Takardu / Albarkatu

Altronix ACM8E Series ACM8CBE Masu Sarrafa Wuta [pdf] Jagoran Shigarwa ACM8E Series, ACM8CBE, Masu Gudanar da Wuta

Magana

• Manual mai amfani