Ho feta matla feela.™
Lethathamo la lintlha tsa ACM8
UL e thathamisitsoeng ka tlase ea Kopano
Fumana Balaoli ba Matla

Mefuta e kenyeletsa:
EA-8-ACM
– Liphetho tse Sirelelitsoeng ke Fuse tse robeli (8).
ACM8CB
– Liphetho tse Sirelelitsoeng ke PTC tse robeli (8).
Tataiso ea ho KenaTšen. 031819

Fetileview:

Altronix ACM8 le ACM8CB UL Listed Sub-Assembly Multi-output Access Power Controllers li fetola tlhahiso e le 'ngoe (1) 12 ho isa ho 24 volt DC hore e be tse robeli (8) tse laoloang ka boithaopo tse fused kapa PTC e sirelelitsoeng. Lisebelisoa tsena tsa matla li ka fetoloa hore e be mabitso a "C" a omileng (mefuta e kopantsoeng feela). Lintho tse hlahisoang li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng [NO] ho kenya letsoho le omileng ho tloha ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo. Liloko, Litokelo tsa Motlakase, Lits'oere tsa mamati a Magnetic, joalo-joalo. Lintho tse hlahisoang li tla sebetsa ka mekhoa ea Fail-Safe le/kapa Fail-Secure. Litsi li etselitsoe ho tsamaisoa ke mohloli o le mong o tloaelehileng oa matla o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela, kapa mehloli e 'meli (2) e ikemetseng ka ho felletseng, e le' ngoe (1) e fana ka matla a ts'ebetso ea boto le e 'ngoe bakeng sa senotlolo / lisebelisoa. matla. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Tšobotsi ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho leha e le life kapa kaofela tse robeli (8).

ACM8 le ACM8CB Series Configuration Chate:

Nomoro ea Mohlala oa Altronix	Palo ea Litholoana	Fuse e Sirelelitsoeng Litholoana	PTC e Sirelelitsoeng E ka setang bocha Litholoana	Ratings khumo	Sehlopha sa 2 se Ratoa Matla a Lekanyelitsoeng	Lintlha tsa Setsi	UL Lists le File Lipalo
EA-8-ACM	8		–	3.5A	*	Kopano e nyane	UL File # BP6714 UL e thathamisitsoeng bakeng sa Litsi tsa Tsamaiso ea Phihlelo (UL 294**). "Thepa ea Matšoao" E Ekantsoe ho CSA Standard C22.2 No.205-M1983
ACM8CB	8	–		2.5A

*Ha e sebelisoa le Motlakase o Lekanyelitsoeng oa Motlakase oa Sehlopha sa 2.
**Fihlella Maemo a Tshebetso a Taolo: Tlhaselo e Senyang - I; Mamello - IV; Line Security - I; Matla a ho ema - I.

Litlhaloso:

• Ts'ebetso ea 12 ho isa ho 24 volt DC (ho beha ha ho hlokahale).
  (0.5A @ 12 volt, 0.3A @ 24 volt ts'ebeliso ea hona joale e nang le li-relay tsohle tse matlafalitsoeng).
• Likhetho tsa ho kenya motlakase:
  a) Kenyeletso e le 'ngoe (1) e tloaelehileng ea matla (boto le matla a senotlolo).
  b) Lisebelisoa tse peli (2) tsa motlakase tse arohaneng (e le 'ngoe (1) bakeng sa matla a boto le e le' ngoe (1) bakeng sa motlakase oa senotlolo / lisebelisoa).
• Tse Robedi (8) tsa Sistimi ya Taolo ya Phihlello di kenya tse kenyang:
  a) Tse robeli (8) tse atisang ho buloa (NO).
  b) Lits'ebetso tse robeli (8) tse bulehileng tsa pokello ea metsi.
  c) Kopanyo efe kapa efe ea tse kaholimo.
• Liphetho tse robeli (8) tse laoloang ka boikemelo:
  a) Lits'oants'o tse robeli (8) tsa Fail-Sireletsehile le/kapa Fail-Sireletseha liphetho tsa motlakase.
  b) Mefuta e robeli (8) e ommeng "C" 5A e lekantsoe liphetho tsa relay.
  c) Kopanyo efe kapa efe ea tse kaholimo.
• Lisebelisoa tse robeli (8) tse thusang (tse sa rokoang).
• Lintlha tse hlahisoang:
  - Li-Fuse li lekantsoe 3.5A ka 'ngoe.
  - Li-PTC li fuoe 2.5A e 'ngoe le e 'ngoe.
• Fuse e kholo e lekantsoe ho 10A.
  Hlokomela: Kakaretso ea tlhahiso ea hona joale e khethoa ke phepelo ea matla, e se ke ea feta palo e kholo ea 10A.
• Li-LED tse khubelu li bonts'a hore lihlahisoa li hlahisoa (li-relays li matlafalitsoe).
• Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8).
  Likhetho tsa ho kenya Alarm ea Mollo:
  a) Ka tloaelo bula [NO] kapa ka tloaelo e koetsoe [NC] e omileng ea ho kopanya.
  b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP.
• FACP output relay (foromo “C” contact rated @ 1A/28VDC, ha e hlahlojoe ke UL).
• LED e tala e bonts'a ha FACP e khaotsoe.
• Li-terminal blocks tse ka ntshuwang li thusa ho kenya habonolo.
• Litekanyo tsa Boto (L x W x H): 7.65" x 4.125" x 1.25" (194.3mm x 104.8mm x 31.8mm)
  Boto e lekana 6.7" x 3.7" (170.2mm x 94mm) le 4.9" x 2.4" (124.5mm x 64mm) mekhoa ea ho holisa.
  Mamello ea Holes Holes: +/– 0.04 in. (1mm).

Litaelo tsa ho Kena:

Mekhoa ea likhoele e tla tsamaellana le Khoutu ea Naha ea Motlakase/NFPA 70/NFPA 72/ANSI, le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela 'me se lokela ho kenngoa ke basebetsi ba tšoanelehang.

1. Sheba Taelo ea ho Kenyeletsoa ha Kopano e Nyenyane bakeng sa ho kenya Rev. MS020119.
   Ka hloko review:
   Setšoantšo se Tloaelehileng sa Tšebeliso (leq. 5)
   Tlhahlobo ea LED (leq. 4)
   Lethathamo la Boitsebiso ba Terminal (leq. 4)
   Litšoantšo tsa ho kopanya (leq. 6-7)
2. Phepelo ea motlakase:
   Lihlopha li ka tsamaisoa ka motlakase o le mong (1) o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela kapa lisebelisoa tse peli (2) tse arohaneng tsa motlakase, e le 'ngoe (1) ho fana ka matla bakeng sa ts'ebetso ea boto le e' ngoe ho fana ka matla. bakeng sa lisebelisoa tsa ho notlela le/kapa lisebelisoa tsa taolo ea phihlello.
   Hlokomela: Matla a ho kenya e ka ba 12 ho 24 volts DC (0.5A @ 12 volt, 0.3A @ 24 volt tshebediso ya hona joale le lisebelisoa tsohle tse matlafalitsoeng).
   (a) Phepelo ea motlakase e le 'ngoe:
   Haeba yuniti le lisebelisoa tsa ho notlela li lokela ho tsamaisoa ho sebelisoa motlakase o le mong, kopanya tlhahiso (12 ho 24 volts DC) ho li-terminals tse tšoailoeng [- Power +].
   (b) Lisebelisoa tse peli tsa phepelo ea motlakase (setšoantšo sa 1c, leqephe la 4):
   Ha ho hlokahala tšebeliso ea lisebelisoa tse peli tsa matla, li-jumpers J1 le J2 (tse ka letsohong le letšehali la li-terminals tsa matla / taolo) li tlameha ho khaoloa. Hokela matla a yuniti ho li-terminals tse tšoailoeng [- Control +] 'me u hokele matla bakeng sa lisebelisoa tsa ho notlela lienteng tse tšoailoeng [- Power +].
   Hlokomela: Ha u sebelisa lisebelisoa tsa motlakase tsa DC polarity e tlameha ho hlokomeloa. Ha u sebelisa lisebelisoa tsa matla a AC polarity ha ea lokela ho hlokomeloa (setšoantšo sa 1d, pg. 4). Lisebelisoa tsa AC ha li hlahlojoe ke UL.
   Hlokomela: Bakeng sa ho latela melao ea UL, phepelo ea motlakase e tlameha ho ngolisoa ka UL bakeng sa Litsamaiso tsa Taolo ea Phihlelo le lisebelisoa.
3. Likhetho tsa tlhahiso (setšoantšo sa 1, leqephe la 4):
   ACM8 e tla fana ka liphetho tse robeli (8) tse fetotsoeng, tse robeli (8) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa matla a fetotsoeng le liphetho tsa "C", hammoho le lisebelisoa tse robeli (8) tse sa sebetseng. ACM8CB e tla fana ka lisebelisoa tse robeli (8) tsa motlakase tse fetotsoeng kapa tse robeli (8) tse sa sebetseng tsa motlakase.
   (a) Lits'oants'o tsa Matla a fetotsoeng:
   Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM].
   Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC].
   Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
   (b) Liphetho tsa Foromo ea "C":
   Ha liphetho tsa foromo "C" li lakatseha, fuse e tsamaisanang le eona (1-8) e tlameha ho tlosoa (ACM8 feela).
   Hokela negative (–) ea phepelo ea motlakase ka kotloloho ho sesebelisoa sa ho notlela. Hokela positi (+) ea phepelo ea motlakase ho theminale e tšoailoeng [C].
   Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC].
   Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
   (c) Lisebelisoa tsa Matla a Tlatsetso (tse sa fetoloang):
   Hokela sesebediswa se nepahetseng (+) se sebediswang ho theminale e ngotsweng [C] le negative (–) ya sesebediswa se tsamaisoang ho theminale e ngotsweng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
4. Likhetho tsa ho kenya letsoho (setšoantšo sa 1, leqephe la 4):
   (a) Hangata Bula [NO] trigger ea ho kenya:
   Lintho tse kenyang 1-8 li kentsoe tšebetsong ke li-senk tse kenang ka tloaelo tse bulehileng kapa tse bulehileng.
   Hokela lisebelisoa (libali tsa likarete, li-keypad, kopo ea ho tsoa likonopo, joalo-joalo) ho litheminale tse tšoailoeng [IN] le [GND].
   (b) Open Collector Sink inputs:
   Hokela setsi sa taolo ea phihlello se bulehileng se bokellang positive (+) ho theminale e tšoailoeng [IN] le negative (–) ho theminale e tšoailoeng [GND].
5. Likhetho tsa Sehokelo sa Alarm ea Mollo (Setšoantšo sa 3 ho isa ho sa 7, leqephe la 6-7):
   [NC] eo hangata e koetsoeng, eo hangata e bulang [NO] kapa keno ea ho khutlisa polarity ho tsoa ho potoloho ea matšoao ea FACP e tla hlahisa likhetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch e tsamaellanang le eona [SW1- SW8] TIMA. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch e tsamaellanang le eona [SW1-SW8].
   (a) Ka tloaelo Bula [NO] ho kenya:
   Bakeng sa ho se latching hook-up (setšoantšo sa 4, leqephe la 6). Bakeng sa latching hook-up (setšoantšo sa 5, leqephe la 6).
   (b) Hangata ho koetsoe [NC]:
   Bakeng sa ho se latching hook-up (setšoantšo sa 6, leqephe la 7). Bakeng sa latching hook-up (setšoantšo sa 7, leqephe la 7).
   (c) Sehlomathisi se kenyang Potoloho ea Letšoao la FACP:
   Hokela positive (+) le negative (–) ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP –].
   Hokela FACP EOL ho li-terminals tse tšoailoeng [+ RET –] (polarity e hlalositsoe boemong ba alamo).
   Jumper e haufi le TRG LED e tlameha ho khaoloa (Setšoantšo sa 1a, leqephe la 4).
6. FACP Dry form "C" tlhahiso (setšoantšo sa 1b, leqephe la 4):
   Hokela sesebelisoa se lakatsehang se ka hlahisoang ke khokahanyo e ommeng ea yuniti ho liteminale tse tšoailoeng [NO] le [C] FACP bakeng sa tlhahiso e tloaelehileng e bulehileng kapa litheminale tse tšoailoeng [NC] le [C] FACP bakeng sa tlhahiso e tloaelehileng e koetsoeng.
   Hlokomela: Sehlahisoa sena ke UL Listed Sub-Assembly bakeng sa tšebeliso ea matla a Altronix UL a thathamisitsoeng joalokaha ho bontšitsoe libukeng tsa ho kenya bakeng sa phepelo ea motlakase.

Tlhahlobo ea LED:

ACM8 le ACM8CB Access Power Controller

LED	ON	TLOA
LED 1- LED 8 (Khubelu)	Li-relay tse hlahisoang li matlafalitsoe.	Li-relay li feletsoe ke matla.
Trg (Tala)	Ho kenya FACP (boemo ba alamo).	FACP e tloaelehileng (boemo boo e seng alamo).

Litafole tsa Boitsebiso ba Terminal:

ACM8 le ACM8CB Access Power Controller

Terminal Taba	Mosebetsi/Tlhaloso
- Matla +	12VDC kapa 24VDC keno e tsoang botong ea phepelo ea motlakase.
- Taolo +	Li-terminals tsena li ka hokeloa ho phepelo ea motlakase e thathamisitsoeng ka thoko ho UL ho fana ka eona matla a ts'ebetso a ikhethileng bakeng sa li-dumpers tsa ACM8/ACM8CB J1 le J2 li tlameha ho tlosoa).
MOTS'EOA SE KENYA 1 – SE KENYA 8 HO GND	Ho tsoa ka mokhoa o tloaelehileng o bulehileng le / kapa o bulehileng oa ho kenya li-tank trigger (kopo ea ho tsoa likonopo, ho tsoa li-par, joalo-joalo).
SEHLOOHO 1 – SEHLAHANG 8 NC, C, NO, COM	Li-volts tse 12 ho isa ho tse 24 tsa AC/DC li baka liphetho tse laoloang: Fail-Safe [NC positive (+) & COM Negative (—)], Fail-Sireletsehile [HA HO positi (+) & COM Negative (—)1, Axiliary output [C positive (+) & COM Negative (—)] (Ha o sebelisa polarity ea phepelo ea motlakase ea AC ha ea lokela ho bonoa), NC, C, NO e fetoha "C" 5A/24VACNDC e fane ka lintlha tse omileng ha li-fuse li etsoa. e tlositsoe (ACM8). Mabitso a bonts'itsoeng a sa qalelle.
FACP SEBAKA T, + INPUT -	Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa ho kenya li ka buloa hangata, hangata e koetsoe ho tloha ho potoloho ea tlhahiso ea FACP (setšoantšo sa 3 ho ea ho 7, maqephe a 6-29.
FACP SEBAKA NC, C, Che	Foromo "C" relay contact rated 0 1A 28VDC bakeng sa tlaleho ea alamo. (Sephetho sena ha se so hlahlojoe ke UL).

Setšoantšo se Tloaelehileng sa Tšebeliso:

TLHOKOMELISO: Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa yuniti ho pula kapa mongobo. Fetola li-fuse (ACM8 feela) ka mofuta le litekanyetso tse tšoanang, 3.5A/250V.

Litšoantšo tsa Hook-Up:

Setšoantšo sa 2 Ho hokahana ha boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase:

Setšoantšo sa 3 Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo):

Setšoantšo sa 4 Ka tloaelo Bulehile: Non-Latching FACP kenya letsoho:

Setšoantšo sa 5 Ka tloaelo Open FACP Latching trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL):

Setšoantšo sa 6 se Koalehile ka tloaelo: Ho kenya FACP e sa Lateng:

Setšoantšo sa 7 Hangata se Koetsoe: Latching FACP trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL):

Lintlha:

Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056
websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIACM8/ACM8CB L14V
Tataiso ea ho Kenya Kopano ea ACM8/CB

Litokomane / Lisebelisoa

Altronix ACM8 Series UL E thathamisitsoeng Sub-Assembly Access Power Controllers [pdf] Buka ea Taelo ACM8, ACM8CB, ACM8 Series UL Listed Sub-Assembly Access Power Controllers, ACM8 Series, UL Listed Sub-Assembly Access Power Controllers, Access Power Controllers, Power Controllers, Controllers

Litšupiso

• Bukana ea Mosebelisi