Fiye da iko kawai.™
Farashin ACM8
UL Jerin Karamin Majalisa
Samun Masu Gudanar da Wuta
Model sun hada da:
ACM8
– Takwas (8) Abubuwan Kariyar Fuse
Saukewa: ACM8CB
– Takwas (8) Abubuwan Kariyar PTC
Jagoran Shigarwa
Littafin 031819
Ƙarsheview:
Altronix ACM8 da ACM8CB UL Lissafin Ƙarshen Babban Taro Masu Fitar da Wutar Lantarki da yawa suna juyar da shigar da wutar lantarki ɗaya (1) 12 zuwa 24 volt DC zuwa takwas (8) mai haɗaɗɗen sarrafa kansa ko abubuwan kariya na PTC. Ana iya canza waɗannan fitilun wutar lantarki zuwa busassun sigar “C” lambobin sadarwa (samfurin da aka haɗa kawai). Ana kunna fitarwa ta wurin buɗaɗɗen mai tattarawa ko kuma buɗewa [NO] busasshen shigar da busassun faɗakarwa daga Tsarin Gudanarwa, Mai karanta Card, Maɓallin Maɓalli, Maɓallin turawa, PIR, da sauransu. Raka'a za su tura wutar lantarki zuwa nau'ikan na'urorin sarrafa damar shiga ciki har da Mag. Makullai, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Fitarwa za su yi aiki a cikin yanayin rashin aminci da/ko gaza-aminci. An tsara raka'a don samun ƙarfi ta hanyar tushen wutar lantarki guda ɗaya wanda zai ba da wutar lantarki ga duka ayyukan hukumar da na'urorin kulle, ko biyu (2) hanyoyin wutar lantarki masu zaman kansu gaba ɗaya, ɗaya (1) samar da wutar lantarki don aikin hukumar da ɗayan don kulle / kayan haɗi. iko. Fuskar FACP tana ba da damar Ƙirar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da ita don jawo wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na takwas (8).
ACM8 da ACM8CB Jadawalin Tsare-tsaren Tunanin Kanfigareshan:
| Lambar Model Altronix | Adadin abubuwan da aka fitar | An Kare Fuse Abubuwan da aka fitar |
An Kare PTC Mai sake saitawa ta atomatik Abubuwan da aka fitar |
Rimar fitarwa | Matsayi na 2 Ƙarfin Ƙarfi |
Jerin Hukumar | UL Lists kuma File Lambobi |
| ACM8 | 8 |  |
– | 3.5 A | * | Karamar Majalisa |
UL File Saukewa: BP6714 UL da aka jera don Rukunin Tsarin Gudanar da Samun damar (UL 294**). "Kayan Sigina" An kimanta zuwa CSA Standard C22.2 No.205-M1983 |
| Saukewa: ACM8CB | 8 | – | |
2.5 A | |
*Lokacin da aka yi amfani da shi tare da Ƙarfin Ƙarfin Ƙarfi na Class 2.
** Matsayin Ayyukan Ikon Samun Shiga: Harin Lalacewa - I; Jimiri - IV; Tsaron layi - I; Tsayawar Wuta - I.
Ƙayyadaddun bayanai:
- 12 zuwa 24 volt DC aiki (ba a buƙatar saitin).
(0.5A @ 12 volt, 0.3A @ 24 volt yawan amfani na yanzu tare da duk abin da aka ƙarfafa). - Zaɓuɓɓukan shigar da wutar lantarki:
a) Daya (1) shigar da wutar lantarki gama gari (ikon allo da kullewa).
b) Biyu (2) keɓaɓɓen abubuwan shigar da wuta (ɗaya (1) don wutar lantarki da ɗaya (1) don ikon kulle / hardware). - Takwas (8) Tsarin Gudanar da Samun shiga abubuwan shigar da bayanai:
a) Takwas (8) na yau da kullun buɗewa (NO).
b) Takwas (8) buɗaɗɗen shigar ruwa mai tarawa.
c) Duk wani hade na sama. - Takwas (8) abubuwan sarrafawa masu zaman kansu:
a) Takwas (8) Rashin-Lafiya da/ko Rashin Amintaccen Fitilar wutar lantarki.
b) Takwas (8) busassun nau'i na "C" 5A wanda aka ƙididdige abubuwan da aka ƙididdigewa.
c) Duk wani hade na sama. - Takwas (8) na'urorin wutar lantarki (wanda ba a haɗa su ba).
- Ƙimar fitarwa:
- Fuses an kimanta 3.5A kowanne.
- Ana kimanta PTCs 2.5A kowanne. - An ƙididdige babban fuse a 10A.
Lura: Jimlar fitarwa na halin yanzu ana ƙaddara ta hanyar samar da wutar lantarki, kada ya wuce iyakar jimlar 10A. - Jajayen LED suna nuna abubuwan da aka kunna (masu kuzarin relays).
- Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8).
Zaɓuɓɓukan shigar da ƙararrawar wuta:
a) Buɗe [NO] ko yawanci rufe [NC] shigar da busassun lamba.
b) shigarwar juyar da polarity daga da'irar siginar FACP. - FACP fitarwa relay (form "C" lamba lamba @ 1A/28VDC, ba UL kimanta).
- Koren LED yana nuna lokacin da aka jawo cire haɗin FACP.
- Tubalan tasha masu cirewa suna sauƙaƙe sauƙin shigarwa.
- Girman allo (L x W x H): 7.65" x 4.125" x 1.25" (194.3mm x 104.8mm x 31.8mm)
Jirgin ya yi daidai da 6.7" x 3.7" (170.2mm x 94mm) da 4.9" x 2.4" (124.5mm x 64mm) tsarin hawa.
Haƙuri na Haƙuri: +/- 0.04 in. (1mm).
Umarnin Shigarwa:
Hanyoyin wayoyi za su kasance daidai da National Electrical Code/NFPA 70/NFPA 72/ANSI, kuma tare da duk lambobin gida da hukumomi masu iko. An yi nufin samfurin don amfanin cikin gida kawai kuma ƙwararrun ma'aikata ya kamata a shigar dasu.
- Koma zuwa Umarnin Shigarwa na Ƙarshen Majalisa don hawan Rev. MS020119.
A hankali sakeview:
Shafi na 5 na aikace-aikace na yau da kullun
Ƙididdigar LED (shafi na 4)
Teburin Gano Tasha (shafi na 4)
Zane-zanen Ƙogi (shafi na 6-7) - Shigar da wutar lantarki:
Ana iya amfani da na'urorin da wutar lantarki guda ɗaya (1) wanda zai samar da wutar lantarki ga duka ayyukan hukumar da na'urorin kulle ko biyu (2) kayan wuta daban-daban, ɗaya (1) don samar da wutar lantarki don aikin hukumar da ɗayan don samar da wutar lantarki. don na'urorin kullewa da/ko kayan sarrafa damar shiga.
Lura: Ƙarfin shigarwa zai iya zama 12 zuwa 24 volts DC (0.5A @ 12 volt, 0.3A @ 24 volt amfani na yanzu tare da duk ƙarfin relays).
(a) Shigar da wutar lantarki guda ɗaya:
Idan za a kunna naúrar da na'urorin kulle ta amfani da wutar lantarki guda ɗaya, haɗa abin fitarwa (12 zuwa 24 volts DC) zuwa tashoshi masu alamar [- Power +].
(b) Abubuwan shigar wutar lantarki guda biyu (Hoto 1c, shafi 4):
Lokacin da ake son amfani da kayan wuta guda biyu, masu tsalle J1 da J2 (wanda ke gefen hagu na tashoshin wutar lantarki) dole ne a yanke. Haɗa wuta don naúrar zuwa tashoshi masu alama [- Control +] kuma haɗa wuta don na'urorin kulle zuwa tashoshi masu alama [- Power +].
Lura: Lokacin amfani da wutar lantarki DC dole ne a kiyaye polarity. Lokacin amfani da wutar lantarki AC ba a kiyaye polarity ba (Fig. 1d, shafi 4). UL ba ya kimanta aikace-aikacen AC.
Lura: Don yarda da UL dole ne kayan wutar lantarki su kasance UL An jera su don Tsarin Gudanar da Samun dama da na'urorin haɗi. - Zaɓuɓɓukan fitarwa (Hoto 1, shafi 4):
ACM8 zai samar da ko dai guda takwas (8) da aka canza wutar lantarki, takwas (8) busassun nau'i na "C", ko duk wani haɗin da aka canza da kuma samar da kayan "C", da takwas (8) abubuwan da ba a haɗa su ba. ACM8CB za ta samar da wutar lantarki guda takwas (8) da aka canza ko kuma takwas (8) waɗanda ba a saka su ba.
(a) Abubuwan da aka Canja Wuta:
Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM].
Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC].
Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wutar lantarki zuwa tasha mai alama [NO].
(b) Form "C" abubuwan da aka fitar:
Lokacin da ake son fitar da nau'i na "C" dole ne a cire fis ɗin fitarwa daidai (1-8) (ACM8 kawai).
Haɗa korau (-) na wutar lantarki kai tsaye zuwa na'urar kullewa. Haɗa tabbataccen (+) na wutar lantarki zuwa tasha mai alama [C].
Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC].
Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wutar lantarki zuwa tasha mai alama [NO].
(c) Ƙarfin ƙarfi na taimako (ba a kunna ba):
Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [C] da kuma mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli da sauransu. - Zaɓuɓɓukan shigar da ƙara (Hoto 1, shafi 4):
(a) Kullum Buɗe [NO] shigar da fararwa:
Ana kunna abubuwan shigarwa 1-8 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa.
Haɗa na'urori (masu karanta katin, faifan maɓalli, buƙatun fita maɓallan da sauransu) zuwa tashoshi masu alama [IN] da [GND].
(b) Buɗe abubuwan shigar da Mai Tari:
Haɗa kwamitin kula da hanyar shiga buɗaɗɗen nutse mai tarawa tabbatacce (+) zuwa tashar da aka yiwa alama [IN] da korau (-) zuwa tasha mai alama [GND]. - Zaɓuɓɓukan Interface Ƙararrawar Wuta (Figs. 3 zuwa 7, shafi 6-7):
Rufe [NC], yawanci buɗe [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. Don kunna cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1- SW8] KASHE. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW8] ON.
(a) Buɗe [NO] yawanci:
Don ƙugiya mara nauyi (Fig. 4, shafi na 6). Don latching ƙugiya (Fig. 5, shafi na 6).
(b) Akan rufe [NC] shigarwa:
Don ƙugiya mara nauyi (Fig. 6, shafi na 7). Don latching ƙugiya (Fig. 7, shafi na 7).
(c) FACP Siginar shigar da madauri mai faɗakarwa:
Haɗa tabbataccen (+) da korau (-) daga fitowar sigina na FACP zuwa tashoshi masu alama [+ INP -].
Haɗa FACP EOL zuwa tashoshi masu alamar [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa).
Jumper dake kusa da TRG LED dole ne a yanke (Fig. 1a, shafi 4). - FACP Dry form “C” fitarwa (Hoto 1b, shafi 4):
Haɗa na'urar da ake so don haifar da busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alamar [NO] da [C] FACP don buɗe fitarwa ta al'ada ko tashoshi masu alamar [NC] da [C] FACP don fitowar da aka rufe.
Lura: Wannan samfurin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwalwar Ƙwararrun Ƙimar Ƙimar UL ya nuna a cikin littattafan shigarwa don wutar lantarki.
LED Diagnostics:
ACM8 da ACM8CB Mai Kula da Wutar Lantarki
| LED | ON | KASHE |
| LED 1-LED 8 (ja) | Relay(s) na fitar da kuzari. | Relay(s) na fitar da kuzari. |
| Trg (Green) | An kunna shigar da FACP (yanayin ƙararrawa). | FACP na al'ada (yanayin rashin ƙararrawa). |
Teburin Gano Tasha:
ACM8 da ACM8CB Mai Kula da Wutar Lantarki
| Labarin Ƙarshe | Aiki/Bayyana |
| - Power + | 12VDC ko 24VDC shigarwa daga hukumar samar da wutar lantarki. |
| - Sarrafa + | Ana iya haɗa waɗannan tashoshi zuwa wani keɓantaccen wutar lantarki na UL Lissafta don samarwa keɓe ikon aiki don ACM8/ACM8CB dumpers J1 da J2 dole ne a cire). |
| FADAKARWA INPUT 1 - INPUT 8 IN GND |
Daga budewa da/ko buɗaɗɗen abubuwan shigar da mai tarawa (buƙatun fita maɓallan, fita par's, da sauransu). |
| FITOWA TA 1 - FITOWA 8 NC, C, NO, COM |
12 zuwa 24 volts AC/DC yana jawo abubuwan sarrafawa masu sarrafawa: Rashin-Safe [NC tabbatacce (+) & COM Korau (-)], Rashin Amintacce [NO tabbatacce (+) & COM Korau (—) 1, Fitowar taimako [C tabbatacce (+) & COM Negative (—)] (Lokacin da ake amfani da wutar lantarki na AC ba a buƙatar kiyaye polarity), NC, C, NO zama nau'i "C" 5A/24VACNDC da aka ƙididdige abubuwan busassun lokacin da fuses suke. cire (ACM8). Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba. |
| FACP INTERFACE T, + INPUT - |
Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci rufewa daga da'irar fitarwa ta FACP (Hoto 3 zuwa 7, shafi 6-29. |
| FACP INTERFACE NC, C, BA |
Form "C" tuntuɓi mai lamba 0 1A 28VDC don rahoton ƙararrawa. (UL ba ya kimanta wannan fitarwa). |
Tsarin aikace-aikace na yau da kullun:
GARGADI: Don rage haɗarin gobara ko girgizar lantarki, kar a bijirar da naúrar ga ruwan sama ko danshi. Sauya fis (ACM8 kawai) tare da nau'in iri ɗaya da ƙima, 3.5A/250V.
Zane-zane na Ƙunƙwasa:
Hoto 2 Haɗawar zaɓi ta amfani da abubuwan shigar wutar lantarki guda biyu (2):
Hoto 3 shigarwar juyar da polarity daga fitarwa na sigina na FACP (an yi la'akari da polarity a yanayin ƙararrawa):
Hoto 4 Akan Buɗewa: Ba-Latching FACP shigar da ƙara:
Hoto 5 A kullum Buɗe shigar da shigar FACP Latching tare da sake saiti (UL ba ta kimanta wannan fitarwa ba):
Hoto 6 Akan Rufe: Ba-Latching FACP shigar da fararwa:
Hoto 7 Akan Rufe: Latching shigarwar FACP mai jawo tare da sake saiti (UL bai kimanta wannan fitarwa ba):
Bayanan kula:
Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
IIACM8/ACM8CB L14V
Jagoran Shigar Ƙarshen Taro na ACM8/CB
Takardu / Albarkatu
 |
Altronix ACM8 Series UL Lissafin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfi [pdf] Jagoran Jagora ACM8, ACM8CB, ACM8 TARIHIN UP da aka jera subilan iko na sub-Ciketers, Acm8 Series, Samun Masu Gudanar da Wutar Power, Masu Gudanar da Wuta, Masu Cikawa |