Ntau tshaj li lub zog xwb.™
ACM8 Series
UL Listed Sub-Assembly
Access Power Controllers

Qauv suav nrog:
ACM8
- Yim (8) Fuse Protected Outputs
ACM8CB
- Yim (8) PTC tiv thaiv tawm
Daim ntawv qhia kev teeb tsaRev. 031819

Tshajview:

Altronix ACM8 thiab ACM8CB UL Listed Sub-Assembly multi-output Access Fais fab Controllers hloov ib (1) 12 mus rau 24 volt DC input rau yim (8) ntawm nws tus kheej tswj fused los yog PTC tiv thaiv outputs. Cov zis hluav taws xob no tuaj yeem hloov mus rau daim ntawv qhuav "C" hu (fused qauv nkaus xwb). Cov zis tawm tau qhib los ntawm lub dab dej qhib los yog ib txwm qhib [NO] cov tswv yim qhuav los ntawm Access Control System, Card Reader, Keypad, Push Button, PIR, thiab lwm yam. Cov chav nyob yuav xa lub zog mus rau ntau yam kev nkag mus rau cov khoom siv kho vajtse xws li Mag Locks, Hluav taws xob Strikes, Magnetic Door Holders, thiab lwm yam. Outputs yuav ua hauj lwm nyob rau hauv ob qho tib si Fail-Safe thiab/los yog Fail-Secure hom. Cov chav nyob yog tsim los siv los ntawm ib qho chaw siv hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv, lossis ob (2) tag nrho cov khoom siv hluav taws xob ywj pheej, ib qho (1) muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab lwm yam rau kev xauv / khoom siv. zog. FACP Interface ua rau muaj kev kub ntxhov, kev soj ntsuam lub tswb, lossis siv tau los ua rau lwm yam khoom siv pabcuam. Lub tswb hluav taws kub disconnect feature yog xaiv ib tus zuj zus rau ib qho lossis tag nrho ntawm yim (8) tso tawm.

ACM8 thiab ACM8CB Series Configuration Reference Chart:

Altronix Model Number	Number of Outputs	Fuse tiv thaiv Cov zis	PTC tiv thaiv Nws pib-Resettable Cov zis	Kev Ntsuas Tawm	Chav Kawm 2 Rated Hwj chim-Limited	Cov npe koom haum	UL Listings thiab File Tus lej
ACM8	8		–	3.5 A	*	Sub-Assembly	UL File #BP6714 UL teev rau Access Control System Units (UL 294**). "Signal Equipment" soj ntsuam rau CSA Standard C22.2 No.205-M1983
ACM8CB	8	–		2.5 A

* Thaum siv nrog Chav Kawm 2 Rated Power-Limited fais fab mov.
** Nkag mus Tswj Kev Ua Haujlwm Qib: Kev puas tsuaj - Kuv; Endurance - IV; Kab Kev Ruaj Ntseg - Kuv; Stand-by Power - Kuv.

Specifications:

• 12 mus rau 24 volt DC ua haujlwm (tsis xav tau).
  (0.5A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).
• Power supply input Options:
  a) Ib qho (1) cov khoom siv hluav taws xob sib xyaw (lub rooj tsav xwm thiab lub xauv lub zog).
  b) Ob (2) cov khoom siv hluav taws xob cais tawm (ib qho (1) rau lub rooj tsav xwm lub zog thiab ib qho (1) rau lub xauv / kho vajtse zog).
• Yim (8) Access Control System ua rau cov khoom nkag:
  a) Yim (8) ib txwm qhib (NO) inputs.
  b) Yim (8) qhib collector dab inputs.
  c) Txhua qhov sib xyaw ntawm cov saum toj no.
• Yim (8) ntawm nws tus kheej tswj cov zis:
  a) Yim (8) Fail-Safe thiab/lossis Fail-Secure fais fab tuag.
  b) Yim (8) daim ntawv qhuav "C" 5A rated relay outputs.
  c) Txhua qhov sib xyaw ntawm cov saum toj no.
• Yim (8) auxiliary power outputs (unstitched).
• Tso zis ntsuas:
  - Fuses raug ntsuas 3.5A txhua.
  - PTCs raug ntsuas 2.5A txhua.
• Main fuse yog ntsuas ntawm 10A.
  Nco tseg: Tag nrho cov zis tam sim no yog txiav txim siab los ntawm cov khoom siv hluav taws xob, tsis pub tshaj 10A tag nrho.
• Liab LEDs qhia tias cov zis tau tshwm sim (relays energized).
• Hluav taws kub tswb disconnect (latching los yog tsis-latching) yog ib tug neeg xaiv rau ib los yog tag nrho ntawm yim (8) outputs.
  Fire Alarm disconnect input xaiv:
  a) Nquag qhib [NO] lossis ib txwm kaw [NC] kev tiv tauj qhuav.
  b) Polarity reversal input los ntawm FACP signaling circuit.
• FACP tso zis relay (daim ntawv "C" tiv tauj @ 1A / 28VDC, tsis ntsuas los ntawm UL).
• Green LED qhia thaum FACP disconnect yog tshwm sim.
• Tshem tawm cov terminal blocks yooj yim ntawm installation.
• Board Dimensions (L x W x H): 7.65 "x 4.125" x 1.25" (194.3mm x 104.8mm x 31.8mm)
  Board haum 6.7 "x 3.7" (170.2mm x 94mm) thiab 4.9 "x 2.4" (124.5mm x 64mm) mounting qauv.
  Mounting Holes 'Tolerance: +/- 0.04 nyob rau hauv. (1mm).

Cov lus qhia installation:

Cov txheej txheem xaim yuav tsum ua raws li National Electrical Code/NFPA 70/NFPA 72/ANSI, thiab nrog rau txhua tus lej hauv zos thiab cov tub ceev xwm muaj cai txiav txim. Cov khoom yog npaj rau kev siv sab hauv tsev nkaus xwb thiab yuav tsum tau nruab los ntawm cov neeg ua haujlwm tsim nyog.

1. Xa mus rau Sub-Assembly Installation Instruction for mounting Rev. MS020119.
   Ua tib zoo rovview:
   Daim Duab Daim Ntawv Thov (pg. 5)
   LED Diagnostics (pg. 4)
   Terminal Identification Table (pg. 4)
   Daim duab sib txuas (pg. 6-7)
2. Lub hwj chim muab tswv yim:
   Cov chav nyob tuaj yeem siv tau nrog ib qho (1) lub zog hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv los yog ob (2) cov khoom siv hluav taws xob sib cais, ib qho (1) muab lub zog rau lub rooj tsavxwm thiab lwm yam los muab lub zog. rau cov khoom siv xauv thiab / lossis nkag mus rau kev tswj hwm kho vajtse.
   Nco tseg: Lub zog hluav taws xob tuaj yeem yog 12 txog 24 volts DC (0.5A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).
   (a) Ib qho khoom siv hluav taws xob ib leeg:
   Yog tias chav tsev thiab cov khoom siv xauv yuav tsum tau siv lub zog siv ib zaug, txuas cov zis (12 txog 24 volts DC) mus rau lub terminals cim [– Fais fab +].
   (b) Dual power supply inputs (Fig. 1c, pg. 4):
   Thaum siv ob lub zog siv hluav taws xob xav tau, jumpers J1 thiab J2 (nyob rau sab laug ntawm lub hwj chim / tswj terminals) yuav tsum raug txiav. Txuas lub hwj chim rau chav tsev mus rau lub terminals cim [– Control +] thiab txuas lub hwj chim rau cov khoom siv xauv rau cov terminals cim [– Fais fab +].
   Nco tseg: Thaum siv DC fais fab khoom siv polarity yuav tsum tau soj ntsuam. Thaum siv AC fais fab mov polarity yuav tsum tsis txhob raug soj ntsuam (Daim duab 1d, pg. 4). Cov ntawv thov AC tsis raug ntsuas los ntawm UL.
   Nco tseg: Rau UL ua raws li cov khoom siv hluav taws xob yuav tsum yog UL Daim Ntawv Teev Npe rau Access Control Systems thiab accessories.
3. Cov kev xaiv tso zis (Fig. 1, pg. 4):
   ACM8 yuav muab yim (8) hloov hluav taws xob tawm, yim (8) qhuav daim ntawv "C" tawm, los yog ib qho kev sib txuas ntawm ob qho tib si hloov hluav taws xob thiab daim ntawv "C" tso tawm, ntxiv rau yim (8) unstitched auxiliary power outputs. ACM8CB yuav muab yim (8) hloov hluav taws xob tawm los yog yim (8) unstitched auxiliary power outputs.
   (a) Switched Power outputs:
   Txuas qhov tsis zoo (–) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [COM].
   Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NC].
   Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) cov tswv yim ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NO].
   (b) Daim ntawv "C" tso tawm:
   Thaum daim ntawv "C" cov zis xav tau, qhov sib thooj cov zis fuse (1-8) yuav tsum raug tshem tawm (ACM8 nkaus xwb).
   Txuas qhov tsis zoo (–) ntawm cov khoom siv hluav taws xob ncaj qha mus rau lub ntsuas phoo. Txuas qhov zoo (+) ntawm lub hwj huam mov mus rau lub davhlau ya nyob twg cim [C].
   Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NC].
   Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) cov tswv yim ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NO].
   (c) Cov khoom siv hluav taws xob txhawb nqa (tsis hloov):
   Txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [C] thiab qhov tsis zoo (–) ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [COM]. Cov zis tuaj yeem siv los muab lub zog rau daim npav nyeem ntawv, keypads thiab lwm yam.
4. Input trigger xaiv (Fig. 1, pg. 4):
   (a) Nquag Qhib [NO] input trigger:
   Cov khoom siv 1-8 yog qhib los ntawm ib txwm qhib lossis qhib cov khoom ntim khoom ntim khoom.
   Txuas cov khoom siv (daim npav nyeem ntawv, keypads, thov kom tawm cov nyees khawm thiab lwm yam) rau cov khoom siv cim npe [IN] thiab [GND].
   (b) Qhib Collector Sink inputs:
   Txuas lub vaj huam sib luag tswj kev nkag mus qhib cov dab dej dab dej zoo (+) mus rau lub davhlau ya nyob twg cim [IN] thiab qhov tsis zoo (–) mus rau lub davhlau ya nyob twg cim [GND].
5. Kev xaiv hluav taws kub tswb Interface (Fig. 3 txog 7, pg. 6-7):
   Ib txwm kaw [NC], ib txwm qhib [NO] cov tswv yim lossis polarity reversal input los ntawm FACP signaling circuit yuav ua rau cov khoom siv tau xaiv. Txhawm rau pab kom FACP Disconnect rau qhov tso zis tig qhov sib txuas [SW1- SW8] OFF. Txhawm rau lov tes taw FACP disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW8] ON.
   (a) Nquag Qhib [NO] input:
   Rau kev sib txuas uas tsis yog latching (Fig. 4, pg. 6). Rau latching hook-up (Fig. 5, pg. 6).
   (b) Nquag Kaw [NC] input:
   Rau kev sib txuas uas tsis yog latching (Fig. 6, pg. 7). Rau latching hook-up (Fig. 7, pg. 7).
   (c) FACP Signaling Circuit input trigger:
   Txuas qhov zoo (+) thiab qhov tsis zoo (–) los ntawm FACP signaling circuit output rau cov terminals cim [+ INP –].
   Txuas lub FACP EOL mus rau lub davhlau ya nyob twg cim [+ RET –] (polarity yog hais txog lub tswb).
   Jumper nyob ib sab ntawm TRG LED yuav tsum raug txiav (Fig. 1a, pg. 4).
6. FACP Qhuav daim ntawv "C" tso zis (Fig. 1b, pg. 4):
   Txuas cov khoom siv uas xav tau los ua los ntawm chav tsev qhov kev tiv tauj qhuav rau cov terminals cim [NO] thiab [C] FACP rau ib txwm qhib tawm lossis cov terminals cim [NC] thiab [C] FACP rau ib txwm kaw cov zis.
   Nco tseg: Cov khoom no yog UL Listed Sub-Assembly rau siv nrog Altronix UL Cov khoom siv hluav taws xob raws li qhia hauv phau ntawv qhia kev teeb tsa rau lub hwj chim.

LED Diagnostics:

ACM8 thiab ACM8CB Access Power Controller

LED	ON	OFF
LED 1- LED 8 (Liab)	Output relay(s) energized.	Output relay(s) de-energized.
Trg (ntsuab)	FACP input triggered (lub tswb mob).	FACP li qub (tsis yog lub tswb).

Terminal Identification Tables:

ACM8 thiab ACM8CB Access Power Controller

Terminal lus dab neeg	Function/Kev piav qhia
- Lub zog +	12VDC lossis 24VDC tawm tswv yim los ntawm lub rooj tsavxwm fais fab.
- Tswj +	Cov terminals no tuaj yeem txuas mus rau ib qho cais UL Listed fais fab mov los muab Kev ua haujlwm cais tawm rau ACM8 / ACM8CB dumpers J1 thiab J2 yuav tsum raug tshem tawm).
TIG INPUT 1 – INPU 8 IN GND	Los ntawm ib txwm qhib thiab / lossis qhib cov khoom siv dab dej ua rau cov khoom nkag (thov kom tawm cov nyees khawm, tawm par's, thiab lwm yam).
TXOJ HAUJ LWM 1 - OUTPUT 8 NC, C, NO, COM	12 mus rau 24 volts AC / DC trigger controlled outputs: Fail-Safe [NC positive (+) & COM Negative (—)], Fail-Secure [NO positive (+) & COM Negative (—)1, Cov khoom siv txhawb nqa [C zoo (+) & COM Negative (—)] (Thaum siv AC fais fab khoom siv polarity yuav tsum tsis txhob saib), NC, C, TSIS tau dhau los ua "C" 5A / 24VACNDC ntsuas cov zis qhuav thaum fuses tshem tawm (ACM8). Cov kev sib cuag tau pom nyob rau hauv lub xeev uas tsis yog-triggered.
FACP INTERFACE T, + NPAJ —	Hluav taws kub tswb Interface ua rau cov tswv yim los ntawm FACP. Cov khoom siv hluav taws xob tuaj yeem qhib ib txwm, ib txwm kaw los ntawm FACP tso zis hluav taws xob (Daim duab 3 txog 7, pgs. 6-29.
FACP INTERFACE NC, C, Nr	Daim ntawv "C" relay hu rau 0 1A 28VDC rau kev ceeb toom ceeb toom. (Cov zis no tsis tau soj ntsuam los ntawm UL).

Hom Daim Ntawv Thov:

CEEB TOOM: Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob siab, tsis txhob tso lub tsev los nag lossis dej noo. Hloov fuses (ACM8 nkaus xwb) nrog tib hom thiab ntsuas, 3.5A / 250V.

Hook-Up Diagrams:

Fig. 2 Kev xaiv sib txuas siv ob (2) cov khoom siv hluav taws xob cais tawm:

Fig. 3 Polarity reversal input los ntawm FACP signaling circuit output (polarity yog siv nyob rau hauv lub tswb):

Fig. 4 Nquag Qhib: Tsis-Latching FACP cuam tshuam cov tswv yim:

Fig. 5 Nquag Qhib FACP Latching trigger input nrog pib dua (Cov zis no tsis tau raug soj ntsuam los ntawm UL):

Fig. 6 Nquag Kaw: Tsis-Latching FACP cuam tshuam cov tswv yim:

Fig. 7 Nquag Kaw: Latching FACP trigger input nrog pib dua (Cov zis no tsis tau raug soj ntsuam los ntawm UL):

Nco tseg:

Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.
140 58th Street, Brooklyn, New York 11220 USA | xov tooj: 718-567-8181 Ib | fax: 718-567-9056 Ib
webqhov chaw: www.altronix.com | e-mail: yog info@altronix.com | Lub neej Warranty
IIACM8/ACM8CB L14V
ACM8/CB Sub-Assembly Installation Guide

Cov ntaub ntawv / Cov ntaub ntawv

Altronix ACM8 Series UL Listed Sub-Assembly Access Power Controllers [ua pdf] Phau ntawv qhia ACM8, ACM8CB, ACM8 Series UL Listed Sub-Assembly Access Power Controllers, ACM8 Series, UL Listed Sub-Assembly Access Power Controllers, Access Power Controllers, Fais fab Controllers, Controllers

Cov ntaub ntawv

• Cov neeg siv phau ntawv