A3116 Motion plus Wireless Hi-Fi Bluetooth Speaker
“
Specifications:
- Input: 5 V 2 A
- Audio output: 30 W
- Battery capacity: max. 6700mAh
- Charging time: Approximately 4 hours (When power is off and the
adapter must be at least 5V/2A) - Playtime (varies by volume level and music content): 12
hours - Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
- Weight (without packaging): 1050 g / 37 oz
- Bluetooth version: V 5.0
- Bluetooth range: 30m/99ft
- Sound Frequency Range: 50Hz~40kHz
Product Usage Instructions:
1. Turning On/Off:
To turn on the Soundcore Motion+, press the Power Button once.
The Power Indicator will show a solid blue light. To turn off,
press and hold the Power Button for 2 seconds until the Power
Indicator shows red/white.
2. Bluetooth Mode:
a. Bluetooth Pairing:
– To enter Bluetooth pairing mode, ensure the Bluetooth Indicator
is slowly flashing blue.
– The speaker will start to connect to the previously connected
mobile device when turned on.
– Once connected, the Bluetooth Indicator will show a solid blue
light.
b. True Wireless Stereo Mode:
– To enter True Wireless Stereo Group Mode, slowly flash white on
the secondary speaker and solid blue on the primary speaker.
3. AUX-In Mode:
If using AUX-In mode, connect your audio source to the 3.5mm
Audio Input Port on the Soundcore Motion+.
4. Charging:
When charging the Soundcore Motion+, ensure it is turned off.
The Charging Indicator will slowly flash red while charging and
show a solid red light when fully charged.
5. Additional Controls:
– Play/Pause music: Press Multi-function Button
– Adjust volume: Use Volume Up/Down Buttons
– Activate Bass: Press Bass Button
– Activate Siri/Voice Control: Press Multi-function Button
twice
– Answer/End calls: Use Volume Up/Down Buttons
– Switch between call and audio sources: Press Multi-function
Button while on a call
Frequently Asked Questions:
Q: How long does it take to fully charge the Soundcore
Motion+?
A: Approximately 4 hours when using an adapter with at least
5V/2A power output.
Q: What is the Bluetooth version of the Soundcore Motion+?
A: The Soundcore Motion+ features Bluetooth version V5.0 for
wireless connectivity.
“`
At a Glance
Bass Indicator 1
Bass Indicator Color: White
2
Bass Button
3
Volume Down Button
4
Multi-function Button
5
Volume Up + Button
6
Bluetooth Button
Using Your Soundcore Motion+
1. Turn On / Off
Bluetooth Indicator
7
BWluheitteooth Indicator Color: Blue /
Power Button / Power Indicator 8
Power Indicator Color: Red / White
USB Type C Port
3.5mm Audio Input Port
ON
Press once
OFF
Press and hold for 2 seconds
Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives the speaker a better sound quality by referring to digital processes that allow playback of music using higher sampling rates. Note: Soundcore Motion+ supports Qualcomm® aptXTM.
a. Bluetooth mode
Slowly Flashing Blue (Fade in and out)
Solid Blue
Bluetooth Pairing Mode
Note: starts to connect to previous connected mobile device when speaker is turned on. Connected to a device
Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
Slowly
True Wireless Stereo Group Mode
Solid White (Secondary speaker) Solid BluePrimary speaker)
Connected to True Wireless Stereo
· With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects with left and right sound channels separated on both speakers.
Music
Play / Pause
Play Next Song
Play Previous Song
Press to turn Bass on Press once to activate bass Note: Press again to switch back to Normal Equalizer Activate Siri / Other Voice Control Software
Volume Up / Down
Mobile phone
Answer Call / End Call Reject Call / Switch between a call on hold and an active call End current call and answer incoming call / End current call and switch to call on hold Switch audio source between Speaker and Phone
Solid Blue Flashing Blue
On a Call Incoming Call
· When turned on, Soundcore Motion+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode.
· To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
· Having connection problems? Remove Soundcore Motion+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
b. AUX-In mode
· Plugging in an audio cable will automatically switch to AUX mode. · When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Motion+
Slowly Flashing Red Solid Red
Off
Low Battery Charging Fully Charged
· Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use.
· USB type C cable only supports charge in, it does not support charge out. · Disconnect your speaker from the charger when fully charged. Do not charge your speaker for
extended periods. · When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 2 A Audio output: 30 W Battery capacity : max.6700mAh Charging time : Approximately 4 hours(When power is off and the adapter must be at least 5V/2A) Playtime (varies by volume level and music content): 12 hours Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch Weight (without packaging): 1050 g / 37 oz Bluetooth version: V 5.0 Bluetooth range: 30m/99ft Sound Frequency Range: 50Hz~40kHz
soundcore APP
soundcore
soundcore
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Note: The ‘x’ of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable ‘x’ Seventh
Eighth
Range of variable 0-9 or A-F
8,9,A,B,C…
Content
Denotes the hardware version which is not effected on the safety compliance.
Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on.
Ninth and tenth
Eleventh The last five
01,02,03…
1-7 00001-99999
Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on.
Denotes date, 1 means Monday, 2 means Tuesday…, 7 means Sunday and so on.
Denotes serial No.
1. Power consumption in standby mode: 0.5W 2. Power management: 20min 3. Information of applicable adapter: Brand: ANKER Manufacturer: Anker Innovations Limited Model: A2337 Input: 100-240V~ 1.0A, 50-60Hz Output: 5.0V 3.0A 15.0W / 9.0V 3.0A 27.0W / 12.0V 2.5A 30.0W / 15.0V 2.0A 30.0W / 20.0V 1.5A 30.0W (30.0W Max)
Default Open Port: Classic Bluetooth Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
Documents / Resources
 |
soundcore A3116 Motion plus Wireless Hi-Fi Bluetooth Speaker [pdf] Instruction Manual A3116 Motion plus Wireless Hi-Fi Bluetooth Speaker, A3116, Motion plus Wireless Hi-Fi Bluetooth Speaker, Wireless Hi-Fi Bluetooth Speaker, Hi-Fi Bluetooth Speaker, Bluetooth Speaker, Speaker |