At a Glance
The Soundcore Motion+ speaker features a sleek design with several control buttons and indicators.
| Label | Feature | Label | Feature |
|---|---|---|---|
| 1 | Bass Indicator | 7 | Bluetooth Indicator |
| Bass Indicator Color: White | Bluetooth Indicator Color: Blue / White | ||
| 2 | Bass Button | 8 | Power Button / Power Indicator |
| 3 | Volume Down Button | Power Indicator Color: Red / White | |
| 4 | Multi-function Button | 9 | USB Type C Port |
| 5 | Volume Up + Button | 10 | 3.5mm Audio Input Port |
| 6 | Bluetooth Button |
The speaker is equipped with High-Resolution Audio for enhanced sound quality, supporting digital processes for higher sampling rates. It also supports Qualcomm® aptX™ technology.
Using Your Soundcore Motion+
1. Turn On / Off
To Turn On: Press the power button once.
To Turn Off: Press and hold the power button for 2 seconds.
a. Bluetooth mode
The speaker connects via Bluetooth. The indicator light shows the connection status:
| Indicator Status | Description |
|---|---|
| Slowly Flashing Blue (Fade in and out) | Bluetooth Pairing Mode. Starts to connect to the previous connected mobile device when the speaker is turned on. |
| Solid Blue | Connected to a device. |
True Wireless Stereo (TWS) Group Mode:
You can pair two Soundcore Motion+ speakers for a wider soundstage with separated left and right channels.
| Indicator Status | Description |
|---|---|
| Slowly | True Wireless Stereo Group Mode (Initiating pairing). |
| Solid White (Secondary speaker) | Connected to True Wireless Stereo (as the secondary speaker). |
| Solid Blue (Primary speaker) | Connected to True Wireless Stereo (as the primary speaker). |
Music Controls
- Play / Pause: Press the multi-function button once (×1).
- Play Next Song: Press the multi-function button twice (×2).
- Play Previous Song: Press the multi-function button thrice (×3).
- Bass On/Off: Press the Bass button once (×1) to activate bass. Press again to switch back to Normal Equalizer.
- Activate Siri / Other Voice Control Software: Press and hold the multi-function button for 2 seconds (×2s).
- Volume Up / Down: Use the Volume Up (+) and Volume Down (-) buttons.
Mobile phone Controls
- Answer Call / End Call: Press the multi-function button once (×1).
- Reject Call / Switch between a call on hold and an active call: Press the multi-function button twice (×2).
- End current call and answer incoming call / End current call and switch to call on hold: Press the multi-function button thrice (×3).
- Switch audio source between Speaker and Phone: Press and hold the multi-function button for more than 2 seconds (>2s).
Call status indicators:
| Indicator Status | Description |
|---|---|
| Solid Blue | On a Call |
| Flashing Blue | Incoming Call |
When turned on, the Soundcore Motion+ automatically connects to the last connected device. If not, press the Bluetooth button to activate pairing mode. To pair a different device, press the Bluetooth button again to re-enter pairing mode. For optimal sound quality, ensure a clear line of sight between the connected device and the speaker, and keep them within 3 feet (approx. 1 meter) if experiencing connection issues after removing the device from your phone's Bluetooth history.
b. AUX-In mode
Plugging an audio cable into the 3.5mm audio input port automatically switches the speaker to AUX mode. Audio playback is controlled via the connected device.
Charging your Soundcore Motion+
The speaker is charged via the USB Type C port.
| Indicator Status | Description |
|---|---|
| Slowly Flashing Red | Low Battery |
| Solid Red | Charging |
| Off | Fully Charged |
- Use the included USB cable to charge your Soundcore Motion+ and ensure it is fully charged before first use.
- The USB Type C cable supports charging the speaker, but not charging other devices (charge out).
- Disconnect the speaker from the charger when fully charged. Avoid charging for extended periods.
- When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
- Input: 5 V = 2A
- Audio Output: 30 W
- Battery Capacity: Max. 6700mAh
- Charging Time: Approximately 4 hours (When power is off and the adapter is at least 5V/2A)
- Playtime: 12 hours (varies by volume level and music content)
- Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
- Weight (without packaging): 1050 g / 37 oz
- Bluetooth Version: V 5.0
- Bluetooth Range: 30m / 99ft
- Sound Frequency Range: 50Hz~40kHz
soundcore APP
Enhance your Soundcore Motion+ experience with the soundcore app. Download it from the app stores:
Available on:
- Google Play (Google Play and the Google Play logo are trademarks of Google Inc.)
- Apple App Store (Apple and the Apple logo are trademarks of Apple Inc.)
SN Code Explanation
The serial number (SN Code) follows a specific format where 'x' represents variable characters:
| Variable 'x' | Range of variable | Content |
|---|---|---|
| Seventh | 0-9 or A-F | Denotes the hardware version, which is not affected by safety compliance. |
| Eighth | 8,9,A,B,C... | Denotes the year (e.g., 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on). |
| Ninth and tenth | 01,02,03... | Denotes the week of the year (e.g., 01 means the first week, 02 means the second week). |
| Eleventh | 1-7 | Denotes the day of the week (1 means Monday, 2 means Tuesday..., 7 means Sunday). |
| The last five | 00001-99999 | Denotes the serial number. |
Additional Information
Power Consumption:
- Standby mode: ≤0.5W
- Power management: ≤ 20min
Information of applicable adapter:
- Brand: ANKER
- Manufacturer: Anker Innovations Limited
- Model: A2337
- Input: 100-240V~ 1.0A, 50-60Hz
- Output: 5.0V = 3.0A 15.0W / 9.0V = 3.0A 27.0W / 12.0V = 2.5A 30.0W / 15.0V = 2.0A 30.0W / 20.0V = 1.5A 30.0W (30.0W Max)
Port Description:
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
