myFIRSTECH FTI-TLP3 Flash Module uye Update Controller

Zvigadzirwa Zvinotsanangurwa

• Product Name: FTI-TLP3
• Kuenderana: DL-TL7 Toyota 4Runner PTS AT w/SLC
• Install Type: 2022-24 Type 1x
• Features: Mwenje kutonga, Kukiya kuwiriranisa, DCM interface

Mirayiridzo Yekushandiswa Kwechigadzirwa

Installation Process

• Usati watanga kuisirwa, ita shuwa kuti une BLADE-AL(DL) -TL7 firmware, flash module, uye update controller.
• Isa Type 1X inosanganisira kubatanidza iyo Main Body ECU mudivi remutyairi kick panel nzvimbo, sarudzo yetrunk/hatch yekubatanidza, uye DCM interface.
• Batanidza mota CAN data kuburikidza ne30-pini yekubatanidza paMain Body ECU.
• YeDCM Interface Type 1x Isa, kanganisa simba kumota telematics module uchishandisa chena / dema & chena / tsvuku BLADE yekubatanidza relay waya.

Mwenje Kudzora

• Shandisa iyo isati yamiswa yegirinhi/chena waya yakasungwa neBLADE yekubatanidza mwenje wekupaka uye auto-light control.
• Tsiva iyo (-) pk mwenje waya kubva kune controller yegrey I/O yekubatanidza newaya yakatsanangurwa yemamiriro uye diagnostic report.

Locks Synchronization

• Kuwedzera kubatanidza kune makiyi egonhi remotokari kunodiwa kuwiriranisa kwakaringana neOEM remotes. Shandisa 6-pini yekuvhara yekubatanidza kuti ushande chaiko.
• Batanidza kune yekudzora module yekuvhara yekubuda port kuti uve nechokwadi chekushanda kwakanaka.

Idle Mode uye Takeover Feature

• Iyo FTI-TLP3 Harness haitsigire iyo Idle Mode chimiro. Tarisa kune yakazara BLADE yekumisikidza dhizaini kune inoshanda wiring kana zvichidikanwa.
• Kutora hakutsigirwi; motokari ichavhara pakuvhura gonhi remutyairi.

LED Programming Error Codes

• 1x: CAN kukanganisa, simbisa magadzirirwo eharness.
• 2x: Kwete IGN, simbisa IGN simba uye harness kumisikidzwa.
• 3x: IMMO/CAN kukanganisa, simbisa harness configuration.
• 4x: Kwete VIN, modhi inogona kusarudzika kune hwaro chikuva #2.
• 5x: VIN isingazivikanwe, module inogona kusarudzika kune base bplatform #2.
• 6x: OEM starter yaonekwa, kutenderera IGN. Kana nyaya ikaramba iripo, gadzirisa zvakare.

FTI-TLP3: Kuvharwa kweMotokari uye Zvinyorwa zvekugadzirira

• Kuiswa uku kunoda BLADE-AL(DL) -TL7 firmware, flash module uye update controller usati watanga kuisirwa.
• Isa Type 1X: Main Muviri ECU, mutyairi wedivi kick panel nzvimbo, sarudzo yetrunk / hatch yekubatanidza, DCM interface inodiwa.
• CAN: Vehicle CAN data inounganidzwa kuburikidza ne30-pini yekubatanidza paMain Body ECU, hapana kumwe kubatana kunodiwa.
• DCM Interface: Type 1x Kuisa kunoda kukanganisa simba kumota telematics module uchishandisa chena / dema & chena / tsvuku
• BLADE connector relay waya, inosanganisirwa muFTI-TLP3 harness assembly. Batanidza sezvakaratidzwa.
• Mwenje: Chiedza chekupaka uye auto-light control inobatwa uchishandisa iyo isati yagumiswa girinhi / chena waya yakasungwa neBLADE yekubatanidza. Bvisa iyo (-) pk mwenje waya kubva kune controller grey I / O yekubatanidza uye tsiva neyakatsanangurwa, yemamiriro uye diagnostic report.
• Makiyi: Iyi yekuisa mhando inoda mamwe makiyi kukiyi yemusuwo wemota kuti ive nechokwadi chekuenderana neiyo
• OEM kuretu. Iyo 6-pini yekuvhara yekubatanidza inodiwa pakushanda chaiko. Batanidza kune yekudzora module yekuvhara yakabuda port.
• Idle Mode haisi chinhu chinotsigirwa cheFTI-TLP3 Harness: Iyo Idle Mode ficha iyo inobvumira mushandisi kubuda mukumhanya yakabviswa kubva kuFTI-TLP3 harness wiring. Kana ichi chimiro chichidikanwa, ndapota tarisa kune yakazara BLADE yekumisikidza dhayagiramu kune inoshanda wiring uye ita chinodiwa chinongedzo kumota PTS bhatani.

TAKEOVER HAIBATSIRWI: MOTA ICHAZARA PAKAVHARA MUKOWO WOMUtyairi.

FTI-TLP3 – DL-TL7 – Rudzi 1x

LED Programming Error Codes

Module LED inopenya RED panguva yekugadzira

1. CAN kukanganisa, simbisa magadzirirwo eharness
2. Kwete IGN, simbisa IGN simba uye harness kumisikidzwa
3. IMMO/CAN kukanganisa, simbisa harness configuration
4. Kwete VIN, module inogona kusarudzika kune hwaro chikuva #2
5. VIN isingazivikanwe, module inogona kusarudzika kune hwaro chikuva #2
6. OEM starter yaonekwa, kutenderera IGN, kana nyaya ikaramba iripo, bvisa uye reprogram

CARTRIDGE KUISA

1. Sraidza cartridge muyuniti. Chiziviso bhatani pasi pe LED.
2. Yakagadzirira Module Programming Procedure.

MODULE PROGRAMMING PROCEDURE

ZVINOKOSHA: Hood inofanira kuvharwa

1. Batanidza bhatani rekutanga kaviri [2x] kuenda ON chinzvimbo.
2. Mirira, kana LED ikaita BLUE yakasimba kwemasekonzi maviri, enda kudanho rechinomwe.
3. Batanidza bhatani rekutanga kamwe [1x] ku OFF chinzvimbo.
4. Mirira, LED inoshanduka yakasimba RED. (Izvi zvinogona kutora maminitsi mashanu.)
5. Batanidza bhatani rekutanga kaviri [2x] kuenda ON chinzvimbo.
6. Mirira, LED inoshanduka yakasimba BLUE kwemasekonzi maviri.
7. Batanidza bhatani rekutanga kamwe [1x] ku OFF chinzvimbo.
8. Module Programming Procedure yapera.

WWW.IDATALINK.COM

Zvinyorwa / Zvishandiso

myFIRSTECH FTI-TLP3 Flash Module uye Update Controller [pdf] Bhuku reMirayiridzo FTI-TLP3, FTI-TLP3 Flash Module neKugadziridza Controller, Flash Module neKugadziridza Controller, Module uye Kudzoreredza Controller, Kudzoreredza Controller, Controller.

References

• User Manual