MOXA AIG-100 Series Arm-Based Computers Installation Guide
Overview
Moxa AIG-100 Series inogona kushandiswa seyakangwara kumucheto magedhi ekutanga data uye kutapurirana. Iyo AIG-100 Series inotarisa paIIoTrelated simba mashandisirwo uye inotsigira akasiyana mabhendi eLTE nemaprotocol.
Package Checklist
Usati waisa iyo AIG-100, simbisa kuti pasuru yacho ine zvinotevera zvinhu:
- AIG-100 gedhi
- DIN-rail mounting kit (yakaiswa kare)
- Simba jack
- 3-pini terminal block yemagetsi
- Kurumidza kuisa gwaro (rakadhindwa)
- Warranty card
CHERECHEDZA Zivisa mumiririri wako wekutengesa kana chimwe chezvinhu zviri pamusoro chisipo kana kukuvara.
Dhizaini yePaneru
Aya anotevera manhamba anoratidza mapaneru marongero eiyo AIG-100 modhi:
AIG-101-T
AIG-101-T-AP/EU/US
LED Indicators
| LED Zita | Status | Function |
| SYS | Girinhi | Simba riri ON |
| Off | Simba AKADZIMWA | |
| Green (kubwaira) | Iyo gedhi ichagadzirisa zvakare kune iyo defaultconfiguration | |
| LAN1 / LAN2 | Girinhi | 10/100 Mbps Ethernet modhi |
| Off | Ethernet port haisi kushanda | |
| COM1/COM2 | Orenji | Serial port iri kutumira kana kugamuchira data |
| LTE | Girinhi | Kubatana kwenharembozha kwave kuwanikwa CHERECHEDZA:Matanho matatu akavakirwa pachiratidzo chesimba1 LED iri ON: Yakashata chiratidzo chemhando2 maLED ari ON: Yakanaka chiratidzo chemhando Yese matatu maLED ari ON: Yakanakisa chiratidzo chemhando |
| Off | Sero interface haisi kushanda |
Reboots kana kudzoreredza iyo AIG-100 kune fekitori default marongero. Shandisa chinhu chakanongedza, senge bepa rakatwasuka clip, kuti uvhure bhatani iri.
- System reboot: Dzvanya uye bata bhatani Reset kwesekondi imwe kana zvishoma.
- Reset kune yakasarudzika kumisikidzwa: Dzvanya uye bata bhatani Reset kusvika iyo SYS LED ichibwaira (anenge masekonzi manomwe)
Kuisa iyo AIG-100
Iyo AIG-100 inogona kukwidziridzwa kuDIN njanji kana kumadziro. Iyo DINrail mounting kit inonamirwa neiyo default. Kuti uodhare kit-mounting kit, bata mumiririri weMoxa sales.
DIN-rail Mounting
Kuti uise iyo AIG-100 paDIN njanji, ita zvinotevera:
- Dhonza pasi inotsvedza yeDIN-njanji bracket kumashure kweyuniti
- Isai pamusoro peDIN njanji muchikamu chiri pazasi pehoko yekumusoro yeDIN-njanji bracket.
- Bata iyo unit yakasimba kune iyo DIN njanji sezvakaratidzwa mumifananidzo iri pazasi.
- Kana komputa yaiswa zvakanaka, unonzwa kudzvanya uye inotsvedza inodzokera panzvimbo yega.
Kukwirisa madziro (kusarudza)
Iyo AIG-100 inogona zvakare kuisirwa madziro. Iyo madziro-inokwira kit inoda kutengwa zvakasiyana. Tarisa kune database kuti uwane rumwe ruzivo.
- Sunga madziro-inokwira kit kuAIG-100 sezvakaratidzwa pazasi:
- Shandisa screws maviri kukwidza AIG-100 pamadziro. Aya maviri screws haana kuisirwa mumadziro-inokwira kit uye inofanirwa kutengwa zvakasiyana. Tarisa kune zvakadzama zvinotsanangurwa pazasi:
Musoro Type: flat
Musoro Diameter > 5.2 mm
Urefu > 6 mm
Saizi ye Thread: M3 x 0.5 mm
Connector Description
Simba Terminal Block
Munhu akadzidzira basa racho anofanirwa kuisa wiring yeiyo yekuisa terminal block. Mhando yewaya inofanira kunge iri mhangura (Cu) uye chete 28-18 AWG saizi yewaya uye torque kukosha 0.5 Nm inofanira kushandiswa.
Power Jack
Batanidza jack yemagetsi (mupasuru) kune AIG-100's DC terminal block (pazasi pepaneru), uye wozobatanidza magetsi adapta. Zvinotora masekonzi akati wandei kuti system itange. Kana iyo system yagadzirira, iyo SYS LED inovhenekera.
CHERECHEDZA
Chigadzirwa chacho chinotarisirwa kupihwa neUL Listed Power Unit yakanyorwa kuti “LPS” (kana kuti “Limited Power Source”) uye inonzi 9-36 VDC, 0.8 A min., Tma = 70°C (min). Kana iwe uchida rumwe rubatsiro nekutenga sosi yemagetsi, ndapota taura neMoxa kuti uwane rumwe ruzivo.
Grounding
Kudzika pasi uye waya routing kunobatsira kudzikisira mhedzisiro yeruzha nekuda kwekukanganiswa kwemagetsi (EMI). Pane nzira mbiri dzekubatanidza AIG-100 pasi waya pasi.
- Kuburikidza neSG (Shielded Ground):
Iyo SG yekubata ndiyo yekuruboshwe-yakanyanya kuonana mune 3-pini magetsi terminal block yekubatanidza kana viewed kubva pakona iri kuratidzwa pano. Paunobatanidza kune SG yekubata, ruzha rwunofambiswa kuburikidza nePCB uye PCB mbiru yemhangura kune simbi chassis. - Kuburikidza neGS (Grounding Screw):
Iyo GS iri padyo nemagetsi ekubatanidza. Kana iwe uchibatanidza kune GS waya, ruzha runofambiswa zvakananga kuburikidza nesimbi chassis.
CHERECHEDZA Waya yepasi inofanira kuva nedhayamita shoma ye3.31 mm2.
CHERECHEDZA Kana ukashandisa adapta yeKirasi I, tambo yemagetsi inofanirwa kubatana kune socket-outlet ine chinongedzo chepasi.
Ethernet Port
Iyo 10/100 Mbps Ethernet port inoshandisa iyo RJ45 yekubatanidza. Iyo pini yekugovewa kwechiteshi ndeye pazasi:
| Pin | Signal |
| 1 | Tx + |
| 2 | Tx- |
| 3 | Rx + |
| 4 | – |
| 5 | – |
| 6 | Rx- |
| 7 | – |
| 8 | – |
Serial Port
Iyo serial port inoshandisa iyo DB9 yechirume yekubatanidza. Software inokwanisa kuigadzirira iyo RS-232, RS-422, kana RS-485 modhi. Iyo pini yekugovewa kwechiteshi ndeye pazasi:
| Pin | RS-232 | RS-422 | RS-485 |
| 1 | D.C.D. | TxD-(A) | – |
| 2 | RxD | TxD+(B) | – |
| 3 | TxD | RxD+(B) | Data+(B) |
| 4 | DTR | RxD-(A) | Data-(A) |
| 5 | GND | GND | GND |
| 6 | DSR | – | – |
| 7 | RTS | – | – |
| 8 | CTS | – | – |
| 9 | – | – | – |
SIM Kadhi Chigadziko
Iyo AIG-100-T-AP/EU/US inouya neaviri nano-SIM kadhi zvigadziko zvekutaurirana kweserura. Iwo nano-SIM kadhi sockets ari padivi rimwe chete neantenna panel. Kuisa makadhi, bvisa screw uye otection chivharo kuti uwane masokisi, uye wobva waisa nanoSIM makadhi muzvigadziko zvakananga. Iwe uchanzwa kudzvanya kana makadhi ari panzvimbo. Socket yekuruboshwe ndeye
SIM 1 uye socket chaiyo ndeye
SIM 2. Kuti ubvise makadhi, sundira makadhi mukati usati waasunungura
RF Connectors
Iyo AIG-100 inouya neRF yekubatanidza kune anotevera interfaces.
Cellular
Iyo AIG-100-T-AP/EU/US modhi inouya ine yakavakirwa-mukati cellular module. Iwe unofanirwa kubatanidza antenna kune SMA connector usati washandisa cellular function. Iyo C1 uye C2 majoini anopindirana kune cellular module. Kuti uwane rumwe ruzivo, tarisa kune iyo AIG-100 Series dhatabheti.
GPS
Iyo AIG-100-T-AP/EU/US modhi dzinouya neyakavakwa-mukati GPS module. Unofanira kubatanidza antenna kuSMA connector neGPS mark usati washandisa GPS basa.
SD Card Socket
Iyo AIG-100 modhi inouya ne SD-kadhi socket yekuwedzera kuchengetedza. Iyo SD kadhi socket iri padyo neEthernet port. Kuisa iyo SD kadhi, bvisa screw uye chivharo chekudzivirira kuti uwane socket, wobva waisa iyo SD kadhi musocket. Iwe uchanzwa kudzvanya kana kadhi rave panzvimbo. Kuti ubvise kadhi, sundidzira kadhi mukati usati wariburitsa.
USB
Iyo USB port imhando-A USB 2.0 chiteshi, inogona kubatana neMoxa UPort modhi kuti iwedzere serial port kugona.
Chaiyo-nguva Clock
Lithium bhatiri inopa simba chaiyo-nguva wachi. Isu tinokurudzira zvakasimba kuti usatsiva iyo lithium bhatiri pasina rubatsiro rweMoxa rutsigiro mainjiniya. Kana iwe uchida kuchinja bhatiri, bata timu yebasa reMoxa RMA.
ATTENTION
Pane njodzi yekuputika kana bhatiri yakatsiviwa nemhando isina kururama yebhatiri. Rasa mabhatiri akashandiswa maererano nemirayiridzo iri mukadhi rewaranti.
Access to the Web Console
Unogona kupinda mukati web console by default IP kuburikidza ne web browser. Ndokumbira utarise kuti mugamuchiri wako neAIG vari pasi peiyo subnet imwechete.
- LAN1: https://192.168.126.100:8443
- LAN2: https://192.168.127.100:8443
Paunopinda mu web console, iyo default account uye password:
- Default account: admin
- Default pasiwedhi: admin@123
Zvinyorwa / Zvishandiso
 |
MOXA AIG-100 Series Arm-Based Computers [pdf] Installation Guide AIG-100 Series Arm-Based Computers, AIG-100 Series, Arm-Based Computers, Computers |
 |
MOXA AIG-100 Series Arm-Based Computer [pdf] Installation Guide AIG-100 Series Arm-Based Computer, AIG-100 Series, Arm-Based Computer, Computer |
