MOXA AIG-100 Series Arm-Based Computers Installation Guide
Tshajview
Moxa AIG-100 Series tuaj yeem siv los ua lub ntsej muag ntse rau cov ntaub ntawv ua ntej thiab xa mus. AIG-100 Series tsom rau IIoTrelated kev siv zog thiab txhawb nqa ntau yam LTE bands thiab cov txheej txheem.
Pob Checklist
Ua ntej txhim kho AIG-100, xyuas kom meej tias lub pob muaj cov khoom hauv qab no:
- AIG-100 rooj vag
- DIN-rail mounting khoom (preinstalled)
- Lub hwj chim nkaus
- 3-pin terminal block rau lub zog
- Kev qhia ceev installation (luam tawm)
- Warranty card
Nco tseg Qhia rau koj tus neeg muag khoom yog tias ib qho ntawm cov khoom saum toj no ploj lawm lossis puas lawm.
Vaj Huam Sib Luag
Cov duab hauv qab no qhia txog vaj huam sib luag layouts ntawm AIG-100 qauv:
AIG-101-T
AIG-101-T-AP/EU/USA
LED Qhov taw qhia
| LED npe | xwm txheej | Muaj nuj nqi |
| SYS | Ntsuab | Lub zog yog ON |
| Tawm | Lub hwj chim yog OFF | |
| Ntsuab (blinking) | Lub rooj vag yuav rov pib dua rau qhov kev teeb tsa tsis raug | |
| LAN1 / LAN2 | Ntsuab | 10/100 Mbps Ethernet hom |
| Tawm | Ethernet chaw nres nkoj tsis ua haujlwm | |
| COM1/COM 2 | Txiv kab ntxwv | Serial chaw nres nkoj yog kis los yog tau txais cov ntaub ntawv |
| LTE | Ntsuab | Cellular kev twb kev txuas tau tsim CEEB TOOM:Peb theem raws li lub teeb liab zog1 LED yog ON: Cov teeb liab tsis zoo2 LEDs yog ON: Zoo teeb liab zoo Tag nrho 3 LEDs yog ON: Cov teeb liab zoo heev |
| Tawm | Cellular interface tsis ua haujlwm |
Reboots lossis rov ua dua AIG-100 rau lub Hoobkas teeb tsa. Siv cov khoom taw qhia, xws li daim ntawv ncaj nraim, txhawm rau qhib lub pob no.
- System reboot: Nias thiab tuav lub khawm Pib dua rau ib pliag lossis tsawg dua.
- Rov qab mus rau lub neej ntawd teeb tsa: Nias thiab tuav lub khawm Pib dua kom txog thaum SYS LED blinks (kwv yees li xya vib nas this)
Txhim kho AIG-100
AIG-100 tuaj yeem txuas rau ntawm DIN rail lossis rau ntawm phab ntsa. Lub DINrail mounting cov khoom yog txuas los ntawm lub neej ntawd. Txhawm rau xaj cov khoom siv phab ntsa, hu rau Moxa tus neeg muag khoom.
DIN-rail Mounting
Txhawm rau txhim kho AIG-100 rau ntawm DIN rail, ua cov hauv qab no:
- Rub tus slider ntawm DIN-rail bracket nyob tom qab ntawm chav tsev
- Ntxig rau sab saum toj ntawm DIN txoj kev tsheb ciav hlau mus rau hauv lub qhov tsuas yog hauv qab tus nuv ntawm DIN-rail bracket.
- Latch lub tsev ruaj khov rau ntawm DIN rail raws li qhia hauv cov duab hauv qab no.
- Thaum lub khoos phis tawj raug teeb tsa kom raug, koj yuav hnov ib nyem thiab lub slider yuav rov qab los rau hauv qhov chaw txiav.
Phab ntsa Mounting (yeem)
AIG-100 tuaj yeem ua rau phab ntsa. Cov khoom siv phab ntsa-mounting yuav tsum tau yuav nyias. Xa mus rau daim ntawv teev cov ntaub ntawv kom paub ntau ntxiv.
- Fasten cov khoom siv phab ntsa-mounting rau AIG-100 raws li qhia hauv qab no:
- Siv ob lub hau ntswj rau mount AIG-100 rau ntawm phab ntsa. Ob lub ntsia hlau no tsis suav nrog cov khoom siv phab ntsa thiab yuav tsum tau yuav nyias. Ua raws li cov lus qhia ntxaws ntxaws hauv qab no:
Lub taub hau hom: tiaj tus
Lub taub hau taub > 5.2 hli
Ntev > 6 hli
Xov Loj: M3 x 0.5 mm
Connector Description
Fais fab Terminal Block
Ib tus neeg tau txais kev cob qhia rau txoj haujlwm yuav tsum tau teeb tsa cov kab hluav taws xob rau kev nkag mus rau lub davhlau ya nyob twg. Hom hlau yuav tsum yog tooj liab (Cu) thiab tsuas yog 28-18 AWG hlau loj thiab tus nqi torque 0.5 Nm yuav tsum tau siv.
Lub zog Jack
Txuas lub hwj chim jack (hauv pob) mus rau AIG-100's DC davhlau ya nyob twg thaiv (hauv qab vaj huam sib luag), thiab tom qab ntawd txuas lub hwj chim adapter. Nws yuav siv sij hawm ob peb feeb rau lub kaw lus kom khau raj. Thaum lub kaw lus npaj txhij, SYS LED yuav teeb.
Nco tseg
The product is intended to be supplied by a UL Listed Power Unit marked “L.P.S.” (or “Limited Power Source”) and is rated 9-36 VDC, 0.8 A min., Tma = 70°C (min). If you need further help with purchasing lub hwj chim qhov twg los, thov hu rau Moxa yog xav paub ntxiv.
Hauv av
Grounding thiab xaim routing pab txo cov teebmeem ntawm lub suab nrov vim muaj kev cuam tshuam electromagnetic (EMI). Muaj ob txoj hauv kev los txuas AIG-100 grounding wire rau hauv av.
- Los ntawm SG (Shielded Ground):
Kev sib cuag SG yog sab laug-feem ntau hu rau hauv 3-pin fais fab davhlau ya nyob twg thaiv qhov txuas thaum viewed los ntawm lub kaum sab xis qhia ntawm no. Thaum koj txuas rau SG kev sib cuag, lub suab nrov yuav dhau los ntawm PCB thiab tus ncej tooj liab PCB mus rau cov hlau chassis. - Los ntawm GS (Grounding Screw):
Lub GS nyob ib sab ntawm lub hwj chim connector. Thaum koj txuas rau GS hlau, lub suab nrov yog ncaj qha los ntawm cov hlau chassis.
Nco tseg Cov xaim hauv av yuav tsum muaj qhov tsawg kawg nkaus txoj kab uas hla ntawm 3.31 mm2.
Nco tseg Yog tias siv Class I adapter, cov hlua hluav taws xob yuav tsum tau txuas nrog lub qhov (socket-outlet) nrog rau kev sib txuas hauv av.
Ethernet Chaw nres nkoj
10/100 Mbps Ethernet chaw nres nkoj siv RJ45 connector. Txoj haujlwm tus pin ntawm qhov chaw nres nkoj yog raws li hauv qab no:
| Pin | Teeb liab |
| 1 | Tx + |
| 2 | Tx- |
| 3 | Rx + |
| 4 | - |
| 5 | - |
| 6 | Txx- |
| 7 | - |
| 8 | - |
Serial Chaw nres nkoj
Qhov chaw nres nkoj serial siv DB9 txiv neej connector. Software tuaj yeem teeb tsa nws rau RS-232, RS-422, lossis RS-485 hom. Txoj haujlwm tus pin ntawm qhov chaw nres nkoj yog raws li hauv qab no:
| Pin | RS-232 | RS-422 | RS-485 |
| 1 | DCD | TxD-(A) | - |
| 2 | RxD | TxD+(B) | - |
| 3 | TxD | RxD+(B) | Cov ntaub ntawv + (B) |
| 4 | DTR | RxD-(A) | Cov ntaub ntawv-(A) |
| 5 | GND | GND | GND |
| 6 | DSR | - | - |
| 7 | RTS | - | - |
| 8 | CTS | - | - |
| 9 | - | - | - |
SIM Daim npav qhov (socket)
AIG-100-T-AP/EU/US los nrog ob daim npav nano-SIM rau kev sib txuas lus ntawm tes. Lub nano-SIM daim npav qhov (sockets) nyob rau tib sab ntawm lub kav hlau txais xov vaj huam sib luag. Txhawm rau nruab cov ntawv teev lus, tshem lub hau ntswj thiab lub hau otection kom nkag mus rau hauv lub qhov (sockets), thiab tom qab ntawd ntxig cov nanoSIM phaib rau hauv lub qhov (sockets) ncaj qha. Koj yuav hnov ib tug nias thaum daim npav nyob rau hauv qhov chaw. Lub qhov (socket) sab laug yog rau
SIM 1 thiab lub qhov (socket) txoj cai yog rau
SIM 2. To remove the cards, push the cards in before releasing them
RF Connectors
AIG-100 los nrog RF connectors rau cov nram qab no interfaces.
Cellular
Tus qauv AIG-100-T-AP/EU/US tuaj nrog ib tug built-in cellular module. Koj yuav tsum txuas tus kav hlau txais xov mus rau SMA txuas ua ntej koj tuaj yeem siv lub xov tooj ntawm tes. C1 thiab C2 connectors yog interfaces rau cellular module. Yog xav paub ntxiv, xa mus rau AIG-100 Series datasheet.
GPS
Tus qauv AIG-100-T-AP/EU/US tuaj nrog lub built-in GPS module. Koj yuav tsum txuas tus kav hlau txais xov mus rau SMA txuas nrog lub cim GPS ua ntej koj tuaj yeem siv GPS ua haujlwm.
SD Card Qhov (socket).
The AIG-100 models come with a SD-card socket for storage expansion. The SD card socket is next to the Ethernet port. To install the SD card, remove the screw and the protection cover to access the socket, and then insert the SD card into the socket. You will hear a click when the card is in place. To remove the card, push the card in before releasing nws.
USB
USB chaw nres nkoj yog hom-A USB 2.0 chaw nres nkoj, uas tuaj yeem txuas nrog Moxa UPort qauv kom txuas ntxiv qhov chaw nres nkoj muaj peev xwm.
Lub sijhawm tiag tiag moos
Lub lithium roj teeb powers lub moos real-time. Peb pom zoo kom koj tsis txhob hloov lub roj teeb lithium yam tsis muaj kev pab los ntawm Moxa tus kws tshaj lij. Yog tias koj xav tau hloov lub roj teeb, hu rau Moxa RMA pab pawg pabcuam.
CEEB TOOM
Muaj kev pheej hmoo ntawm kev tawg yog tias lub roj teeb hloov nrog lub roj teeb tsis raug. Pov tseg cov roj teeb uas siv tau raws li cov lus qhia hauv daim card warranty.
Nkag mus rau lub Web Console
Koj tuaj yeem nkag rau hauv web console los ntawm default IP los ntawm web browser. Thov xyuas kom koj tus tswv tsev thiab AIG nyob hauv tib lub subnet.
- LAN1: https://192.168.126.100:8443
- LAN2: https://192.168.127.100:8443
Thaum koj nkag rau hauv web console, tus account default thiab password:
- Default account: admin
- Default lo lus zais: admin@123
Cov ntaub ntawv / Cov ntaub ntawv
 |
MOXA AIG-100 Series Arm-Based Computers [ua pdf] Daim ntawv qhia kev teeb tsa AIG-100 Series Arm-Based Computers, AIG-100 Series, Arm-Based Computers, Computers |
 |
MOXA AIG-100 Series Arm-Based Computer [ua pdf] Daim ntawv qhia kev teeb tsa AIG-100 Series Arm-Based Computer, AIG-100 Series, Arm-Based Computer, Computer |
