Zviri mukati hide

1 Ecolink Intelligent Technology

2 Ecolink Z-Wave Plus FireFighter

2.1 SKU: FF-ZWAVE5-ECO

2.2 Quickstart

2.3 Ruzivo rwakakosha rwekuchengetedza

2.4 Chii chinonzi Z-Wave?

2.5 Product Description

2.6 Gadzirira Kuisa / Reset

2.6.1 Dzorera kufekitari default

2.6.2 Yambiro Yekuchengetedza yeMains Powered Devices

2.7 Kubatanidzwa/Kusabatanidzwa

2.7.1 Kubatanidzwa

2.7.2 Kusabatanidzwa

2.8 Kukurumidza dambudziko kupfura

2.9 Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

2.9.1 Mapoka eMasangano:

2.10 Technical Data

2.11 Tsanangudzo yeZ-Wave chaiyo mazwi

2.11.1 References

2.12 Related Posts

Ecolink Intelligent Technology

Ecolink Z-Wave Plus FireFighter

SKU: FF-ZWAVE5-ECO

Chii chinonzi Z-Wave?

Z-Wave ndiyo yepasirese isina waya protocol yekutaurirana muSmart Home. Izvi
mudziyo wakakodzera kushandiswa munharaunda yakataurwa muchikamu che Quickstart.

Z-Wave inovimbisa kutaurirana kwakavimbika nekusimbisa meseji yese (nzira mbiri
kutaurirana) uye ese mains powered node anogona kuita seanodzokorora mamwe ma node
(meshed network) kana iyo inogamuchira isiri yakananga isina waya renji ye
transmitter.

Ichi chishandiso uye chimwe nechimwe chakasimbiswa Z-Wave chishandiso chinogona kuva kushandiswa pamwe chete nezvimwe
yakasimbiswa Z-Wave mudziyo zvisinei nerudzi uye kwaakabva chero bedzi ari maviri akakodzera kune
zvakafanana frequency range.

Kana mudziyo unotsigira kukurukurirana kwakachengeteka ichataurirana nemimwe michina
yakachengeteka chero bedzi chigadziro ichi chinopa imwechete kana yakakwirira yehutano.
Zvikasadaro zvinongoerekana zvashanduka kuita yakaderera mwero wekuchengetedza kuchengetedza
kumashure kugarisana.

Kuti uwane rumwe ruzivo nezve Z-Wave tekinoroji, zvishandiso, machena mapepa nezvimwe ndapota tarisa
kune www.z-wave.info.

Product Description

Iyo Ecolink Z-Wave Plus FireFighter idhijitari inoteerera yako utsi, moto, kana Carbon Monoxide alarm uye inotumira seyambiro kuhub yako kuti ikuzivise nezve chiitiko. zvese zvenguva 3 uye 4 mapatani emuchina wako wekunzwa, ane makore mashanu ebhatiri hupenyu pa (5) CR1A Lithium bhatiri inosanganisirwa.Dimensions are 123 3/1″ x 8″ kureba. Certified kushanda neZ-Wave inogonesa hubs pa market.

Gadzirira Kuisa / Reset

Ndapota verenga bhuku rekushandisa usati waisa chigadzirwa.

Kuti ubatanidze (wedzera) mudziyo weZ-Wave kune network inofanira kunge iri mufekitari default
state. Ndokumbirawo muve nechokwadi chekuseta zvakare mudziyo mufekitari default. Unogona kuita izvi ne
kuita basa reKusabatanidzwa sezvinotsanangurwa pazasi mubhuku rekushandisa. Yese Z-Wave
controller inokwanisa kuita oparesheni iyi asi zvinokurudzirwa kushandisa yekutanga
mutongi weiyo yapfuura network kuti ave nechokwadi chekuti mudziyo wacho hauna kubatanidzwa nemazvo
kubva kune network iyi.

Dzorera kufekitari default

Ichi chishandiso chinobvumirawo kusetwa patsva pasina kubatanidzwa kweZ-Wave controller. Izvi
nzira inofanirwa kushandiswa chete kana iyo yekutanga controller isingashande.

Factory Default Iyo FireFighter inogona kudzoserwa kufekitori default marongero ayo anobvisa ayo Z-Wave Plus node ID kubva kune sensor (asi kwete mutongi) nematanho anotevera. A)Isa bhatiri mu sensor.B)Usadzvanya tamper switch.C)Bata bhatani rekudzidza pasi kwemasekonzi gumi kusvikira LED yachinja RED.D) Sunungura bhatani rekudzidza uye umirire masensor egirini yeLED kuti arambe achifemera pamusoro nekudzima. Iyo sensor ikozvino yakagadzirira kuwedzerwa kune network yeZ-Wave Plus, uye zvese zvigadziriso zvakadzoserwa.Ndapota shandisai nzira iyi chete kana network primary controller isipo kana neimwe nzira isingashande.

Yambiro Yekuchengetedza yeMains Powered Devices

CHENJERA: vanotenderwa matekiniki chete vari pasi pekutariswa kwenyika-yakananga
kumisikidza nhungamiro/maitiro anogona kuita mabasa ane mains simba. Pamberi pegungano re
chigadzirwa, voltage network inofanirwa kudzimwa uye kuve nechokwadi kuti isachinjisa zvakare.

Kubatanidzwa/Kusabatanidzwa

Pafekitori default mudziyo hausi weZ-Wave network. Chishandiso chinoda
kuva yakawedzerwa kune iripo isina waya network kutaurirana nemidziyo yetiweki iyi.
Iyi nzira inodaidzwa Kubatanidzwa.

Midziyo inogona zvakare kubviswa kubva kunetiweki. Iyi nzira inodaidzwa Kusabatanidzwa.
Maitiro ese ari maviri anotangwa neyekutanga controller yeZ-Wave network. Izvi
controller inoshandurwa kuita yekusabatanidzwa inoenderana inclusion mode. Kubatanidzwa uye Kusabatanidzwa ndiko
obva aita kuita yakakosha yemanyorero chiito pamudziyo.

Kubatanidzwa

Kuwedzera SensorA)Iva nechokwadi chekuti Z-Wave Plus Controller yauri kushandisa inoenderana neFireFighter. B) Kukwira kana kufambisa sensor padhuze nepaunokwanisa kunzvimbo iri muchivako umo sensor ichakwidzwa kuitira kuti iyo itsva Z-Wave Plus node inowedzerwa kunzvimbo chaiyo mune mesh network routing matafura. C) Kuti uwedzere sensor kune iripo Z-Wave Plus network, tevera mafambiro ekuisa yako Z-Wave Plus Controller mune yekuwedzera (inosanganisira) modhi. Iyo FireFighter inopinda wedzera uye bvisa (kusanganisira / kusabatanidzwa) maitiro pakudzvanya bhatani rekudzidza kwesekondi 1 iro riri paPCB pakati pe LED ne t.amper switch. Kana iyo LED ikatanga kubwaira ichienderera, sensor haina node ID uye haina kubudirira kuwedzerwa, saka tanga nhanho C zvakare. D) Kana mushure memasekondi mashanu LED isiri kubwaira, tarisa paZ-Wave Plus controllers interface kuti uwane mhinduro yekuti sensor yakawedzerwa zvinobudirira. Kana iwe usingaone chero mhinduro iyo sensor yakawedzerwa, tevera mafambiro ekubvisa sensor kubva kuZ-Wave Plus network, wobva waedza kuwedzera sensor zvakare. Kana iwe uchiri kunetseka, ungangoda kuwedzera mamwe Z-Wave Plus ekuteerera zvishandiso mukati-pakati pemutongi uye sensor.

Kusabatanidzwa

Kubvisa SensorA)Chero sensor inogona kubviswa pane chero network yeZ-Wave Plus nechero Z-Wave Plus controller.Tevedza mafambiro kuti uise Z-Wave Plus Controller yako muZ-Wave Plus yekusabatanidzwa mode.B)Dzvanya bhatani rekudzidza riri pedyo. LED uye Tamper switch.Kana yakabudirira kubviswa kubva kuZ-Wave Plus network, masensor e LED anofanirwa kungoramba achibwaira kana akabudirira.

Kukurumidza dambudziko kupfura

Heano mashoma mazano ekuisa network kana zvinhu zvikasashanda sezvaitarisirwa.

1. Ita shuwa kuti mudziyo uri mufekitori reset mamiriro usati wasanganisira. Mukupokana usabvisa pamberi sanganisira.
2. Kana kusanganisirwa kuchiri kutadza, tarisa kana zvese zvishandiso zvinoshandisa ma frequency akafanana.
3. Bvisa zvese zvakafa kubva kumasonganiro. Zvikasadaro uchaona kunonoka kwakanyanya.
4. Usamboshandisa bhatiri midziyo yekurara isina yepakati controller.
5. Usavhote FLIRS zvishandiso.
6. Ita shuwa kuti une yakakwana mains powered mudziyo kuti ubatsirwe kubva kune meshing

Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

Z-Wave zvishandiso zvinodzora zvimwe Z-Wave zvishandiso. Ukama pakati pemudziyo mumwe
kudzora mumwe mudziyo kunonzi kushamwaridzana. Kuti udzore zvakasiyana
mudziyo, mudziyo unodzora unofanirwa kuchengetedza runyoro rwemidziyo inogashira
kudzora mirairo. Aya mazita anonzi mapoka ekubatana uye anogara aripo
zvine chekuita nezvimwe zviitiko (semuenzaniso bhatani rakadzvanywa, sensor trigger, ...). Zvikazo
chiitiko chinoitika ese maturusi akachengetwa muboka rekubatana achaita
gamuchira imwechete isina waya yekuraira isina waya, kazhinji iyo 'Basic Set' Command.

Mapoka eMasangano:

Nhamba YebokaMaximum NodesDescription

Technical Data

Tsanangudzo yeZ-Wave chaiyo mazwi

• Controller - iri Z-Wave mudziyo une kugona kubata network.
  Ma controller anowanzo magedhi, Remote Controls kana bhatiri rinoshandiswa madziro controller.
• Muranda - iri Z-Wave chishandiso chisina kugona kubata network.
  Varanda vanogona kunge vari masensa, actuators uye kunyange kure kure.
• Primary Controller - ndiye murongi wepakati wetiweki. Zvinofanira kuva
  controller. Panogona kuve nemutongi mumwe chete wekutanga muZ-Wave network.
• Kubatanidzwa - ndiyo maitiro ekuwedzera michina mitsva yeZ-Wave mune network.
• Kusabatanidzwa - ndiyo maitiro ekubvisa Z-Wave zvishandiso kubva kunetiweki.
• Kushamwaridzana - hukama hwekutonga pakati pemudziyo unodzora uye
  mudziyo unodzorwa.
• Wakeup Chiziviso -imeseji yakakosha isina waya yakapihwa neZ-Wave
  mudziyo wekuzivisa unokwanisa kutaura.
• Node Information Frame -imeseji yakakosha isina waya inoburitswa nea
  Z-Wave mudziyo kuzivisa kugona kwayo uye mabasa.